Tender for providing SOP to HRTC Kullu for EV Charging Station at Bus Stand Sarwari Kullu in Electrical Section Sarwari under ESD No I HPSEBL Kullu on Turnkey Basis

11KV HT Line (Supply Part):-

Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any

Supply of 11KV HT AB cable of size 3x95+95 sq.mm

Supply of 11 kV Pin Insulator Brown Glazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm

Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm

Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

2800 mm long

Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

2800 mm long

Supply of Cross Bracing set suitable for 11 KV made of only TATA/SAIL/Rashtriya ispat M.S. Angle Iron (2x2125x50x50X6 mm) confirming to REC specifications suitable for easily fixing on steel poles as per requirement

Supply of Belt set suitable for 11 KV made of only TATA/SAIL/Rashtriya ispat M.S. Angle Iron (2x1800x50x50X6 mm) confirming to REC specifications suitable for easily fixing on steel poles as per requirement

Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)

Supply of Earthing set suitable for HT line/Earthing of metering unit made of GI pipe 40 mm dia (internal dia) wall thickness 3.25 mm medium quality pipe of standard make conforming to IS: specifications 2500 mm long with GI Socket closed at top pipe shall have holes of 12 mm dia every 150 mm apart throughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at top end of the pipe along with bolts and nuts size 50x12 mm and washers for fixing the clamp on the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.

Supply of End termination kits for AB cable of size 3x95+95 sq.mm

Supply of MVT connector

Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV

Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.

Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines

Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size

Supply of facade Hook

Supply of Half Clamp (MS Flat 50x6mm)

Supply of Full Clamp (MS Flat 50x6mm)

Supply of Barbed wire

Supply of Red Oxide

Supply of Aluminium Paint for all poles and steel fitting

11KV HT Line (Erection Part):-

Erection of steel tubular pole (Conversion of Double Pole str into Four Pole Str) digging of pit, Drilling of holes in X-arm, Erection of pole, Fixing of insulator X-arm, Fixing of barbed wire danger plate , Concreting of RCC Muff, Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)

Erection of AB cable of size 3x95+95 sq.mm

Erection of End Termination Kit

Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)

Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)

Erection of GO switch unit

Erection of DO fuse unit

630KVA, 11/0.4KV DTR (Supply Part)

Supply, Testing etc. including Design, engineering, manufacture, assembly, inspection, testing and delivery of ISI marked, non-sealed, oil immersed, ONAN type, 50 Hz. double wound, 3-phase- 11/0.433KV, 630KVA, outdoor type distribution transformers, for use in power distribution system

Supply of 11KV 400 A, 25kA G.O. switches complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.

Supply of 11KV, outdoor, open, dropout (D.O.) explusion type fuse units, complete with manually operated equipment and accessories required for their satisfactory operation for their use on distribution sub-station and tapping /sectionalizing points of 11 KV lines.

Supply of 9kV, 10 kA Porcelain Station Surge Arresters complete with accessories for 11KV system

Supply of LT distribution panel box for 630 KVA DTR road specification:- MS sheet of 1.6 MM (1800x1000x700 mm) cubide box complete with stand etc. and AI busbar inside painted/powder coated after primer coating. Minor specification:- Filted with backelite sheet, 1000Amp Copper thimble ACB 1000 amp Copper thimble ACB 1000 amp 3P 50kA -1 No, Make L & T, Schneider, Havells, ABB or equivalent, MCCB 400 Amp 50kA 3P of L&T Scheneider ABB, Havalle or equivalent make-3 Nos.

Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any

Supply of 11 KV Disc insulator B&S type conformimg to IS-731/1971 all latest version thereof for suspension & tension string ball and socket type having pin ball. The minumum and maximum creepage distance with diameter of insulator- 225 mm & having electromechanical strength 90KN. The insulator shall have W type phosphors bronze security clips for ball socket porcelain conforming IS: 2486-1971 (90KN) complete in all respect. Moderately polluted atmospheres Creepage distance 320mm Including dead end clamps etc.)

Supply of LT Cable (3.5 Core) 500 mm2

Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)

Supply of Earthing set suitable for Substations made of GI pipe 38 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 3000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. Bottom end of the pipe shall be weilded with MS Plate of Size 300x300x6mm.

Supply of GI wire 6SWG for earthing

Supply of MS Channel 100x50x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

2800 mm long

460 mm for supporting of main channel of CTPT/DTR

Supply of MS Channel 75x40x6 mm Cross Arm: Fabrication and supply of Cross arms suitable for 11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts for supporting GO Switch / DO Fuse units. The weight of MS channel should be strictly 7.14 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality:

2800 mm for G.O. Switch and D.O. Fuse Unit

460 mm for GO switch handle supporting

Supply of MS Angle Iron 50x50x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 50x50x6 mm, suitable for fixing on Steel double pole structure of 11KV structures with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 4.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:

2800 mm for supporting LA, LT Distribution Box

450 mm long

950 mm long

Supply & Erection of MS Angle Iron 35x35x6 mm :Fabrication and supply of members made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Angle Iron 35x35x6 mm, suitable for fixing on 11kV Steel double pole structure with holes at suitable places wherever required to adjust 5/8” dia nuts and bolts. The weight of MS Angle Iron should be 2.5 Kg per meter with a variation of +/-5%. The member should be duly painted with two coat red oxide paint of superior quality:

460 mm for CTPT unit belting & knee bracing

Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size

Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV

Supply of Galvanised steel barbed wire of 9.8 kg /100metre

Supply of Half Clamp (MS Flat 50x6mm)

Supply of Full Clamp (MS Flat 50x6mm)

Supply of Aluminium Thimbles

Supply of Copper Thimble 200Amp

Supply of Red Oxide

Supply of Aluminium Paint for all poles and steel fitting

Supply of ACSR conductor of size 6/1/3.35 mm (50mm2) conforming to IS-398 (Part-II)/1996 with upto date amendments for Jumpering Tapping

Supply of LT switched capacitors 216-KVAr for 630KVA DTR

630KVA, 11/0.4KV DTR (Erection Part):-

Erection of 630KVA , 11/0.433KV DTR complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateform structure member CI, AI i.e. X-arm & Knee bracing set, Erection of Double Pole Structure, Concreting of RCC Muffs , Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection of Drop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, Providing Earthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor, etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Laying of LT Cable, Barbed wire, LT switch capacitor bank & painting complete in all respect

Civil Part (Plinth, Chain link & Fencing):-

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:- all kind of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 gradedstone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 Cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Supplying and stacking at site:- Bajri Spreading of stone aggregate 20 mm thick.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm.

LT Line (Supply Part):-

Supply of 9.00 Mtr. Long ISI marked swaged steel tubular pole as per IS: 2713/1980 (Part-'A') as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation 410SP-32

Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any (RCC Muff shall be supplied by the HPSEBL Qty = 9 No.)

Supply of LT XLPE cable 3.5 core 240 sq.mm

Supply of Steel rope of suitable size for holding of LT XLPE cable alongwith clamps & allied material

Supply of LT Stay Sets suitable for LT lines made up of MS round 1600mm in length, 16 mm dia having threads up to 300 mm on one end with one nut and one check nut to avoid slippage and eye of 40 mm dia on other side and welded confirming to REC specifications. Elbow made of MS channel iron 70x40x6mm,250 mm long and MS round 16mm dia, vertical height 300mm , both ends bent after putting in two holes of channel iron taking the ends out 25mm minimum and welded with channel iron. One anchor of angle iron 50x50x6 mm ,750 mm in length with one hole of 20mm dia in the center .The complete stay set shall be painted with superior quality black Japan paint. &Supply of Galvanized Stay Strand( including stay wire @ 6.0kg par stay set) conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:- Grade -4 Size 7/3.15mm (7/10SWG)

Supply of Earthing set suitable for LT line made of GI pipe 25 mm dia (internal dia) wall thickness 3.25 mm, Medium quality pipe of standard make conforming to IS: specifications 2000 mm long without GI Socket closed at top. Pipe shall have holes of 12 mm dia every 150 mm apartthroughout the length and staggered diameterically. Full clamps of MS Flat 40x3 mm fitted at the top end of the pipe along with bolts nuts of size 50x12 mm and washers for fixing the clampson the pipe. The bottom end of the pipe shall be tapered cut at 45 degree.

Supply of Galvanised Mild Steel wire conforming to ISS-280/1978/2006 (with up to date amendments ) for general engineering purpose, having fine finish, hot dip galvanised, with heavy coating of Zinc as per ISS-4826/1979 (2001-06)(latest) in soft condition and of size 4.06 mm (8 SWG).

Supply of X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length [600 mm]

Supply of LT Distribution Boxes(3Phase-4 bays)

Supply of Knee Bracing Set 1100mm (65x65x6) mm

Supply of Half Clamp (MS Flat 50x6mm)

Supply of Full Clamp (MS Flat 50x6mm)

Supply of M.S. Hexagon Bolts and Nuts with washers conforming to ISI-1363-1992 off size

Supply of Red Oxide

Supply of Aluminium Paint for all poles and steel fitting

Erection Part (LT Line):-

Erection of steel tubular pole 9.00 Mtr. Long complete viz digging of pit, Erection of pole, Fixing of insulator, Concreting of RCC Muff, Filling of pit+ramming, painting of pole and all steel items (Punching of the poles is stricitly not allowed)

Erection of LT XLPE cable a/w steel rope & allied material

Erection of Stay Set LT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting)

Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit)

Modernization and Digitalization:-

HP Make AIO Desktop Model HP 200 G4 with:- Intel Core i5-1235U-12th Gen. Processor, 8GB DDR4 RAM expanable upto 16GB, 1TB HDD(7200RPM), 21" antiglare LED display with FHD (1920X1080), Interagted HD Graphics & Webcam, 2XUSB 3.0, 2XUSB 2.0, Audio port/ VGA/HDMI/DP port, 10/100/1000M IPV6 compliant LAN, USB keyboard & USB Mouse, Internal speaker, 1x802.11b /g/n/ac,PL-Windos 11 Pro 64 bit. O.S. :- with Three years onsite warranty.

Please Enable Macros to View BoQ information