Upgradation of existing officer club and rest house and Jogging pathway construction at Adra

A-Execution of all works under CPWD DSR 2023-Ver-1 6469945.82 Below/P

B-Execution of all works under CPWD Horticulture 2020-Ver-2 541495.68 Below/P

C-Execution of all works under special items of work 1646916.74 Below/P

Item Breakup - A-Execution of all works under CPWD DSR 2023-Ver-1

Item Breakup - B-Execution of all works under CPWD Horticulture 2020-Ver-2

Item Breakup - C-Execution of all works under special items of work

Preparation of Design and drawing for building Sqm (approved by IIT or NIT)

Model landscaping of fountain (14' dia) flora Each watercastlefountain water pattern-A group of geysers(consisting of16 nos of geysers) throwing milk leadwater into airproducing an effect like castle. Pool size required 14 feetdia water effect 10 feet height (centre) 4 feet (outcircle) max (approx) pump set 2x7.5 HP three phasesubmersible mono blockl uminatijon singled fixed colour(Brilliant white preferred) 17 nos of water proof lightcable/pzanel board cable for pump set and light up to10 mtr distance and suitable panel board shall be supplied.

Description: RIDOFLEX OR SIMILAR BRAND Square 13MM (10+3) CUSHIONED SPORTS FLOORING Foot SYSTEM. PU Sports Flooring 13mm (10+3) Thickness. To Be Installed on Smooth Leveled Kota Stone/ RCC Sub-Base/ Asphalt Base. Product specifications Type: PU Based cushioned system System: 10mm rubber mat + 3 mm PU layer Thickness: 13mm Synopsis of Sports flooring - PU System: 1) Installed on smooth leveled surface 2) Sub-base Preparation (cleaning and moisture checking will be done during the sub- base preparation) 3) Adhesive layer/Primer Layer 4) Sticking of 10mm rubber mat/cast in situ (SBR granules With PU Binder & laid evenly) 5) Pore filler coat 6) First layer of 1.5mm liquid applied PU layer 7) Second layer of 1.5mm liquid applied PU layer 8) One coat of color coat on top surface 9) Game line marking Brand: RIDOFLEX OR SIMILAR BRAND (Rate includeds freight charges, GST & all other incidental charges)

Supply and installation of 2 pairs of movable Numbers net pole. Material should be in good condition when received at site that is without any physical damage. Faulty materials will not be accepted, warrantee/ guarantee should be one year from the date of installation. ADRA DIVISION-ENGG/SOUTH EASTERN RLY

Providing, fitting and fixing of wooden flooring Square of specification given below Surface Board Foot Made Kiln Seasoned (Moisture contain approximately - 14%), Treated Tak Wood finished with 21mm thick, 55mm to 70mm wide Random width and in 2 ft to 5ft Random length in tongue and groove shape. The edges of the boards will have finger lock groove and the bottom side with air pass groove and treated with special anti termite and water resistant lacquer. The Under Frame: Made of commercial quality pine wood runners of 70mm x 45mm, treated with anti termite solution and fixed on the bottom side with 10mm thick air cushioned pads, stappled through the two wings at 300mm x 300mm. Installation: IPS subfloor treated with a vapors barrier to be placed on the leveled IPS sub- floor before laying the under frame. The runners having air cushion pads to be placed on the vapour barrier in perfect level at 300mm in 1 direction. The surface board to be screwed to the runner through the tongue only and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area/ walls. Finishing: After laying the flooring, the floor boards will be leveled to a uniform surface and applied a thin coat of water based polish on the face.. as per direction of Engineer-in- Charge

Paneling with PVC Louvers Covering walls and Square windows with Plywood, blockboard of Foot 19mm/12mm/6mm thickness as per design flushed with Decorative PVC Louvers. Cost included all contractor's labour, materials, tools & plants etc. as per direction of Engineering.

Supply & fixing Rimless Jaquar wall hanging Numbers comode with soft close slim seat cover 360X500X335mm KUS-WHT 35953BIUFSM of Jaquar make or similar approved by Engineer in charge.

Supply & fixing conceal wall cistern JCSWHT Numbers 2400 FS without control plate of Jaquar make or similar approved by Engineer in charge.

Supply & fixing Table top Basin Jaquar Numbers triangular shape 600X410X100 LYS WHT 38901N of Jaquar make or similar approved by Engineer in charge.

Supply & fixing concealed body for single Numbers lever Diverter 40m. Cartidge - ALD-079N of Jaquar make or similar approved by Engineer in charge.

Supply & fixing Angular Stop cock with flange Numbers 10.00 ALI-85053 of Jaquar make or similar approved by Engineer in charge.

Supply & fixing Overhead shower alive Maze Numbers 200x300mm round edge & rectangular head single flow OHS-85859M of Jaquar make or similar approved by Engineer in charge. ADRA DIVISION-ENGG/SOUTH EASTERN RLY

Supply 400X25X25mm Square shape for wall mounted showers with flange SHA of Jaquar make or similar approved by Engineer in charge.

Supply & fixing 2 way Bib cock with wall flange Numbers 10.00 ALI-85041 of Jaquar make or similar approved by Engineer in charge.

Supply and fixing soap dish holder ACN-1131N Numbers of Jaquar make or similar approved by Engineer in charge

Supply and fixing Rack bolt ZPS-MST-RB07 of Numbers Jaquar make or similar approved by Engineer in charge Total 1646916.74