set of spares required for Tornado make MMAW welding plants; 1) Bridge rectifier, used in Tornado 401-XP model welding plant, part code:- SJ10006635; Qty:- 20 No's 2) Gate Plate Bottom , used in Tornado 401-XP model welding plant, part code:- SJ10044949; Qty:- 5 No's 3) Gate Plate Top, used in Tornado 401-XP model welding plant, part code:- SJ10044950-0; Qty:- 5 No's; 4) Isolation PCB-OP, used in Tornado 401-XP model welding plant, part code:- S20.01.001.0505; Qty:- 10 No's; 5) Gate Plate, used in Tornado 401 model welding plant, Part code:- TOR401B05004-0, Qty:- 4 No's; 6)Cooling Fan with CAPA, used in Tornado 401 model welding plant, Part code:- TOR401FAN-0, Qty:-15 No's; 7) Current sensor, used in Tornado 401 model welding plant, Part code:- TOR401CS-0, Qty:- 3 No's; 8) Filter Capacitor, used in Tornado 401 model welding plant, Part code:- D02544-1-0, Qty:- 3 No's; 9) Bridge Snubber, used in Tornado 401 model welding plant, Part code:- MOV680V20OHM-0, Qty:- 5 No's;

Only Offers from the OEM, M/s ADOR WELDING LIMITED- PUNE or its authorized dealer M/s HINDUSTAN TRADE CENTRE INDIA PRIVATE LIMITED- HYDERABAD, supported by a valid authorization letter issued by the OEM, shall be accepted, as this is a Single Tender PAC.

Please go through Tender eligibility criteria before submission of offer.

Please go through NIT, special conditions Bid document, IRS conditions of contract and other relevant circular before submission of offer. Once the offer is submitted, it will be considered that the firm/bidder has gone through and the same are accepted by them.

Please check that the offered description is exactly as per tender description.

Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under statutory Variation Clause.

Please check whether you have enclosed relevant document for MSEs to get benefit / preference under Public Procurement Policy.

All the firms are exempted from payment of EMD except where the firm has been disqualified from exemption from submission of EMD/SD, for all tenders for procurement of goods issued by any unit of Indian Railway, due to withdrawal or modification of bids during the period of validity, or if being called upon to submit the performance security/ Security Deposit, fail to submit the performance security/ Security Deposit before the deadline defined in the request for bid document/Notice Inviting Tender as per extant instructions. The Security Deposit amount shall be 5% of the value of the contract.

Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non- MSE firm.

F.O.R. Destination.

Firms are advised to quote as per delivery schedule mentioned in the tender. Offers with large variation from tendered delivery schedule are liable to be ignored.

Validity of the offer shall be 90 days

Special Tender Conditions-Implementation of GST: "The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email id).

In Keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

UDYAM Registration Certificate must be attached with offer if you want to claim benefits under Public Procurement Policy for Micro/Small Enterprise.

[a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number. [e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax bill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.