PROVN OF ILLUMINATED WIND DIRECTION INDICATOR AT 11 END OF RUNWAY AT AIR FORCE STATION BAREILLY

Amount

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair face of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of new or untreated surface of wall and applying two coats of white wash complete all as specified and as directed.

M&L for PCC volumetric and nominal mix concrete M-20 grade, (1:1.5:3) type A-1 (using 20 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer, cleat, plate etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed.

S&F 01 No control gear box , 01 No. pully and having one point suspension system with stainless steel wire rope of 8 mm dia and double drum winch with luminaire mounting arm, pully assembly, for pulling the pole complete all as specified and as directed. Note:- Wire rope shall be measured and paid seperately under respective item of BOQ.

S&F galvanised MS wire rope 8 mm dia including fixing clamp (minimum 3 clamp at each end) complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and as directed.

M&L for preparation of new cemented/brick surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15 deep and getting out in soft/ loose soil complete all as specified and as directed.

M&L for 50mm thick sub base with moorum/red bajri or laterite, spread, rolled and consolidated to gradient and camber required complete all as directed and as specified.

M&L for 100mm thick cement concrete (1:4:8) type D-2, (using 40mm graded stone aggregate) as in floor complete all as directed and as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as directed and as specified.

M&L for PCC design mix M-20 (using 12.5 & 20mm mm graded stone aggregates) (in two layers 100mm each) as in filling and mass concrete complete all as specified and as directed.

M&L for forming construction joint 30 mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as directed and as specified.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and as directed. Note:- Excavation, earthwork, protection of cable etc shall be measured and paid seperately.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 Sqmm 3.5 core complete all as specified and as directed. Note:- Excavation, earthwork, protection of cable etc shall be measured and paid seperately.

M&L for making horizontal hole by mannual boring under hard standing, pavements or roads for insertion of GI pipes 50 / 80 mm bore and making good the disturbed surface complete all as specified and as directed.

M&L for dry sand cushioning for protection of under ground cables (8cm before laying the cable and 15cm after laying the cable in trenches) complete all as specified and as directed.

M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, length of brick equal to width of brick, complete all as specified and as directed.

M&L for 50mm bore, GI tubing medium grade including necessory fittings, laid in trenches /fixed with poles as in mechanical protection to underground cable complete all as specified and as directed.

M&L for 80mm bore, GI tubing medium grade including necessory fittings, laid in trenches /fixed with poles as in mechanical protection to underground cable complete all as specified and as directed.

S&F weather proof thermo plastic (Polysterene) Cable Junction box, having protection class IP-66 and of overall size 155mm x 210mm x 92mm having metric knockouts on the wall, duly fixed with the pole with clamp made out of aluminium strip of size (25mmx3mm), GI bolts, nuts, washers and 2 Nos polymide weather proof cable glands of cable sealing range 10mm to 16mm (Complete with check nut) with and including 1 No 30 Amps 4 Way cable connector and 1 No. 6 Amps SP MCB complete all as specified and as directed. Make:- Hensel Cat Part No DK 1610 G or equivalent model of make Spelsberg and Rittal.

S&F copper flexible wire PVC insulated, 2 core, multistranded of size 1.5 Sq. mm with FRLS copper conductor cable in surface/ recessed as required from Junction Box to Street light fittings complete all as specified and as directed. Make :- Finolex, Havells, Polycab.

S&F LED Lamp 12 Watt complete all as specified and as directed. Make :- Wipro, Philips, Havells, Osram.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.

S&F MCB TPN 32 Amps, 415 Volts, breaking capacity, 10 KA, 'C' series etc complete all specified and as directed.

S&F integral LED Aviation Obstruction Light of capacity 10-24 watt suitable for 240 volts AC 50 Hz supply with operating input voltage 100-270 volts AC complete with short circuit and surge voltage protection and having ingress protection class IP-65 (Min) comprising with aluminium housing with polycarbonate enclosure and having LED not less than 300 Nos rigidly mounted on a 300mm long GI pipe of suitable diameter fixed on a GI flange duly fixed on the roof of watch tower with anchor bolt including necessary connection from nearby electric point with a 3 core round flexible copper cable of size 1.5 sqmm complete all as specified and as directed. Make:- Micolux / BAJAJ/ Matadoor.

Design, supply, erection, testing and commissioning of outdoor type Bus Bar Chamber of overall size not less than 750mm width x 750mm Height (Without Canopy & Base Channel) x 400mm Depth, MS Channel Base Frame mounted (to be mounted on the 3 side covered brick pedestal of height 450mm above ground level), suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bars (current carrying capacity 200 amps) for cable termination. The bus bar chamber shall be compartmentalized type suitable for separate chambers for Bus Bars, Cable Alley & switchgears duly fabricated in a approved / certified factory / fabrication house who posseses type test certificate from CPRI for similar type of enclosure and having modern fabrication and testing facility which includes atleast seven (07) tanks pre-treatment facility comprising of de-greasing, rinsing, de-rusting, phosphating, and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032 (SIEMENS GRAY). The bus bar chamber shall be provided with suitable rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate and having front and rear opening facility with single layer shutter with locking facility and 2 side slanting canopy type roof on top and mild steel channel (MC-75) base frame at bottom and 2 Nos Earthing Termination bolts, suitable for mounting on the brick pedestal through grouting bolt, The bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation. The following components shall have to be fixed inside the bus bar chamber :- INCOMING (a) MCCB 4P 100 Amps (16 KA) - 01 No OUTGOING (a) MCCB 4P 63 Amps (10 KA) - 02 Nos & 1 No Spare. (b) LED Phase indicator lamp suitable for 230 volts - 03 Nos (Red-Yellow- Blue) (d) Control fuse 3 amps for the LED lamps.- 03 Nos.

M&L for earthing complete with galvanized steel earth plate of size (600x600)mm x6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip of size (25×4)mm as earthing lead connected by means of nuts/bolts, check nuts and washer of galvanized iron or steel including 32 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe, excavation and earth work, charcole dust, common salt, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for chamber and MS angle iron frame of size (40x40x3)mm and RCC cover 40 mm thick RCC (1:2:4) type B1 (using 20mm graded stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering pipe complete all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and as directed. Note :- Cost of earthing strip & GI pipe 32mm dia up to 7.5 m shall be deemed to be included in cost of above item.

M&L for earthing complete with galvanized steel earth plate of size (600x600)mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron wire 4mm dia as earthing lead connected by means of nuts/bolts, check nuts and washer of galvanized iron and steel tubing 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe, excavation and earth work, charcoal dust, common salt, PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) for chamber and MS angle iron frame of size (40x40x3)mm and RCC cover 40 mm thick (1:2:4) type B1 (using 20 mm graded stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and as directed. Note:- Cost of earthing wire lead & GI pipe 15mm up to 7.5 m shall deemed to be included in cost of above item.

Supply, installation, testing and commissioning factory made LT feeder pillar box outdoor type wall mounted of size (1000x750x450)mm suitable for 415 Volts 3 phase 4 wire system 50Hz supply having aluminum bus bar 200 Amps for phases and neutral, installed on porcelain / epoxy insulator. the panel shall be dust proof, vermin proof (IP54) and applying spray painting with two coats of synthetic enamel paint over a coat of zinc chrome primer on sheet made out of 3.15mm thick CRCA sheet self moulded type and (50x50x6)mm angle iron frame front and rear opening with double shutter and locking arranement with 50mm lock and including grouting of panel with necessary PCC (1:2:4) type B-1 complete all as specified. The scope of work includes provision of housing the following acceessories:- Incoming :- (i) MCCB 63 Amp with 4 pole, 16 KA -01 No. (ii) Volt meter 0-500 Volts, Square flush pattern, digital type -01 No. (iii) Amp meter square flush pattern 0-100 Amps digital type-01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marke. (vi) Alarm System for indicate the commercial power failure. Outgoing :- (i) MCCB 40 Amp, 4 pole, 10 KA 415 volts -02 No. (ii) MCB 20 Amp, 4 pole, 10 KA 415 volts -01 No.

SHRI SIDHI VINAYAK INFRASTRUCTURE DEVELOPERS

M/s Agarwal Builders

Zaigham Enterprises