Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance A 99 SECTOR 4 AIROLI NAVI MUMBAI 400708 | NAVI MUMBAI | THANE | MAHARASHTRA | 400708 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 11TH FLOOR ECO CENTRE BUSINESS TOWER P NO 4 EM BLOCK SECTOR V KOLKATA 91 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance BU 02 SFS FLATS OUTER RING ROAD PITAMPURA NORTH WEST DELHI DELHI 110034 | NORTH WEST DELHI | DELHI | 110034 | Admitted-Fee/PreQual/Technical/Finance |
| 5 | Admitted-Fee/PreQual/Technical/Finance 107 2 AMPA MANOR IST FLOOR NELSON MANICKAM ROAD AMINJIKARAI CHENNAI 0 600 029 NO 107 2 AMPA MANOR 1ST FLOOR NELSON MANICKAM ROAD AMINIJIKARAI AMINJIKARAI | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
26 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DCE CED,PD,EP
2nd Floor Sarathi Building,NFC,HYD 62
S,I,T,C of Central AC System with AHU,Condensing units Air Cooled along with GI ducting, refrigerant copper tubing, thermal acoustic insulation, supporting structural works, cabling, supply return air grills etc at NFC Hyd.
2022_NFC_703554_1
E/639/2022
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
90 days
NFC, HYDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹2.8 L
27 Aug 2022
30 Jul 2022
27 Aug 2022
30 Jul 2022
26 Aug 2022
10 Aug 2022
210 days
Amount
Air Handling Units (AHU) - Double Skin Air handling Units; panels made out of 45 +/- 2 mm thick fabricated out of pre coated 0.8 mm thick GI on outer side and 0.8 mm thick ALUZINC / GI pre coated on inner side with PUF insulation density of 38+/-2 Kg/Cu.m. AHU shall comprising of mixing box section with aluminium airfoil blade low leakage type F/A & R/A dampers suitable for manual/motorized operation; Integral type Sound attenuators , Pre filter section with 20 micron filters, DX cooling coil with insulated SS 304 stainless steel drain pan, fan section with DIDW centrifugal fan, belt drive with taper lock bush pulleys. fire retardant flexible canvass connection between fan & ahu panel. Motor : high efficiency EFF1. Static pressure : 200mm WG. Coil face velocity NMT 400 FPM. Nom Air Flow : 13,200 CFM, Actual capacity of AHU : 33 TR. AHU should be of EUROVENT Certified . AHU shall be supplied with necessary accessories such as catch all filters, emergency light, limit switch , gaurd for inspection door etc.
Supply
Erection
Condensing Units - Air Cooled type Condensing untis equipped with High Energy Efficient Imported Scroll Compressors , Galvanized steel Construction finished in polyester powder coat etc This unit is equipped with Microprocessor based controller having unique features to ensure that system operates at optimum efficiency levels. These units will be inter connected with AHU at item Sl. No. ( 1 ). Capacity: 11 TR. These units shall be supplied with all required accessories such as appropriate sized service Valves, drier filter with both side valves, liquid receiver, in- built thermal/ temperature protection etc. 3 Nos.X 11 TR Condensing units shall be connected to each AHU
Supply
Erection
Testing and commissioning of above condensing units including Nitrogen pressure testing, Vaccumising and Eco-friendly Refrigerant gas charging.
Supply
Erection
Refrigerant Copper piping : High pressure copper refrigerant piping consisting of suction & liquid line piping and fittting with 19 mm thick closed cell elastomeric XLPE insulation and covered with suitable thick/mill glass cloth and finished with polyshield coating with atleast two coats of resin and hardner .The piping shall be carried with soldered/ brazed socket fittings. Refrigerant Hard Copper piping i.e. Liquid line & Suction line with necesary elbows, fittings, service valves, drier filter/catch all filter ( with both side valves ) , thermostatic expansion valves (for each condensing unit) , nitrile rubber insulation , clamping, supporting structure ( GI perforated tray & cover) with grouting , from AHU to 11 TR Condensing Units ( Sizes of Hard Copper pipings is as per OEM recommnedations)
Supply
Erection
Ducting : Design , supply , installation , testing and commissioning of Factory Fabricated GI Ducting complete with high tech supports ( Turning / catch shall be installed for appropriate locations ) . Ducting should be as per SMACNA std. The scope includes required scafolding required for erection of GI ducting etc.
Supply: GI ducting 22 Gauge
Erection: GI ducting 22 Gauge
Supply: GI ducting 24 Gauge
Erection: GI ducting 24 Gauge
Supply: GI ducting 18 Gauge
Erection: GI ducting 18 Gauge
Aluminium SA grills: Aluminium Supply AIR Grills /4-way Diffusers powder coated of minimum thickness 0.8 mm along with all necessary hardware with Volume Control Damper (VCD) .
Supply
Erection
Aluminium RA grills : Aluminium return air Grills/diffusers powder coated of minimum thickness .8 mm along with all necessary hardware without Volume Control Damper (VCD)
Supply
Erection
Damper : Supply and fixing of volume control dampers with chrome plated spindles, self lubricated bushes, full enclosure for blade linkages, operating handle equiped with position indicator. 18g GI for frame,20g for Blades
Supply
Erection
Fire Damper : Fusible link type fire dampers with 90 min fire rating with limit switch
Supply
Erection
THERMAL INSULATION OF DUCTS ( EXPOSED ): Supply and Application of External Thermal Insulation of Supply Air and return air ducting coming out side. Material of construction shall be cross linked polyolefin/polyethylene foam material with closed cell structure and with factory applied reinforced aluminium foil. The density of the same shall be within 25 Kg/m3.The material should have a thermal conductivity not exceeding 0.032 W/mK. The insulation material shall be shall be stuck to the cleaned duct surface by factory pre-fixed cold adhesive. The finishing will be carried out with fixing 200 gsm glass cloth with the help of adhesive Fevicol lag coating (AF 5590) . Finally it will be painted with synthetic enamel paint. The material and installation methodology should be in accordance with the specifications. Insulation shall be of 25 mm thick
Supply
Erection
THERMAL INSULATION OF DUCTS (UN EXPOSED) : Supply and Application of External Thermal Insulation of Supply Air ducting. Material of construction shall be cross linked polyolefin/ polyethelene foam material with closed cell structure and with factory applied reinforced aluminium foil. The density of the same shall be within 25 Kg/m3.The material should have a thermal conductivity not exceeding 0.032 W/mK. The insulation material shall be shall be stuck to the cleaned duct surface by factory pre-fixed cold adhesive. The material and installation methodology should be in accordance with the specifications. Thickness of insulation:25mm thick - Class " O "
Supply
Erection
ACOUSTIC INSULATION OF DUCTS : Supply and Application of Acoustic insulation for the initial portion of supply air ducting. Material of construction shall be fibre-free elastomeric nitrile rubber foam with open cell structure . The density of the same shall be within 140-180 Kg/m3. The material should have a thermal conductivity not exceeding 0.050 W/mK. The maximum surface temperature the material should withstand is 105° C and minimum temperature should be -20°C. The material should conform to Class 1 rating for surface spread of Flame as per BS 476 Part 7. The insulation material shall be shall be stuck to the cleaned duct surface by factory pre-fixed cold adhesive. The material and installation methodology should be in accordance with the specifications. Thickness of insulation:25mm.
Supply
Erection
Providing of sound attenuators at appropriate locations . It will of square/rectangular flanged type 18G GI sheet casing complete with 22 G splitters consisting of 48 Kg/Cum density Minaral wool tissue facing with 26 G aluminum perforated sheet.
Supply
Erection
Thermal Insulation for metal (Zinc-Aluminum Colour Coated Roofing Sheets) roofing : Thermal insulation with 25 mm thick EPS of minimum density 16 kg/cum , using suitable adhesive,etc. The maximum surface temperature of the material should withstand is 105° C and minimum temperature should be -20°C.
Supply
Erection
Wire mesh and cowl for fresh air
Supply
Erection
CPVC drain piping with required clamps,fittings, insulation and supports 40 mm dia
Supply
Erection
CONTROL CUM DISTRIBUTION MCC PANEL: Supply, Erection, Testing and Commissioning of MV control cum distribution panel ( for AHU's, condensing units, reheaters ) of Indoor, free standing floor mounting type, 3 ph/415 V 4, wire dust and vermin proof by construction of 14 SWG CRCA sheets, treated with 7 tank process, painted with epoxy powder coating, compartmentalized, modular type with IP 42 Protection. Incomer: 1No - MCCB with ROHM arrangement, 1 Set of Current transformer, 1 No - Digital Multi data Meter with dual reading arrangement for volt, Amps, PF & Energy ,1 Set - LED type RYB indication lamps with control fuses , rated capacity Four Pole control MCB with neutral link. Outgoing - 1 ( 3 nos of A H U ) : 3 ph star-delta starter (fuse less protection) suitable MCCB, power contactor, bi-relay, timer, under voltage trip, overvoltage trip, single phase prevention, phase reversal unbalanced load trip relays, on/off push button, indicator lamps, auto manual operation . Outgoing - 2 ( 9 nos of condensing units-11 TR Cap.): Multiple feeders for Condensing units with rated/suitable TPNMCCB, suitable TPN Aluminium Bus Bar ( TPN+E Electrolyte grade) and associated accessories as required. The MCC panel shall have 2 spare cubicle one for the AHU and the other for condensing units. Include potential free contacts as and when required. MCC Panel suitable for 3 Nos X 33 TR AHU - 13200 CFM- 125 MM ST.PR, 9 nos. 11.0 TR DX air-cooled condensing units and ERV. a. __ TPN SDFU incomer – 1 No b. __ HP star delta starter with MCCB for condensing units - 9 Nos c. __ HP star delta starter with MCCB for blowers - 3 Nos. d.---- LED type RYB indication lamps on line side of Incomer with MCB – 1set e.----Trivector meter with Ethernet & RS485 connectivity of secure/Enercon make on the outgoing side of Incomer with MCB protection – 1Set Electrical control panel comprising starters for AHUs and control of condensing units . Including stategic control system with digital temp display.
Supply
Erection
Electrical Cabling ( Power cabling):Supply, Installation, Testing & Commissioning of BIS Certified FRLS , PVC insulated Armoured Copper Power Cables of suitable ratings/sizes between the distribution board, outdoor units,heaters, AHU Units including lugs,crimping and terminations identifying labels duly clamped with Terminations.
Supply
Erection
Electrical cabling (control Cabling): Supply, Installation and Testing of BIS certified PVC insulated Armoured FRLS copper control cable of suitable rating/size interconnecting the indoor and outdoor units.
Supply
Erection
GI Cable Tray with cover - different sizes as per site requiremet
Supply
Erection
GI Earthing: 25x3 mm GI flat laid in open fashion with necessary clamps , screws and interlinks etc for earthing of drives
Supply
Erection
STRUCTURAL FABRICATED STEEL WORK: Supply, Fabrication , Cutting, Welding , Erection at site and painting of M. S. Angle structural steel work for required truss, AHU/ODU /Supporting structurer/etec. & as per site requirements, etc. based on the approved drawings. The work should be carried out as per good manufacturing and installation practices in concurrence with approved drawings. The structural steel materials should confirm to IS : 2062 (latest version) as per drawings. All welding electrodes to confirm to relevant IS codes. Fabrication and erection of the structural steel works shall be as per IS: 800 and welding work as per IS:816 and IS: 822. Finally all steel work to be painted with one coat of zinc chromate primer and two coats of Metal primer paint.
Supply
Erection
Civil Works (RCC)
Supply
Erection
BLUE STAR LTD
INTEGREATED COOLTECH PVT LTD
Aqua Cool Co. Pvt.Ltd.
TOOT MNE TECH Private Limited
PNEUMATIC ENGINEERS PVT LTD.
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .