Loading…
Loading…
Tender Value
₹174.1 Cr
EMD Value
₹15 L
Closing Date
17 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
CE (AF) Gandhinagar
HQ CE(AF) Gandhinagar, Lekawada Patia, Chiloda, Gandhinagar-382042
CONSTRUCTION OF CERTAIN TECHNICAL, ADMINISTRATIVE AND MARRIED / SINGLE LIVING ACCN WITH CONNECTED SERVICES AT AF STN DEESA UNDER PH-II (DESIGNATED AS GP-III)
2026_MES_771804_1
89415
Open Tender
Civil Works
4563 days
GE(P) (AF) DEESA
AS PER NIT, PRE-QUALIFICATION CREATRIA AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹3,000
GE (P) (AF) DEESA
₹15 L
Yes
CE (AF) GANDHINAGAR
12 Jun 2026
12 Jun 2026
20 Jul 2026
12 Jun 2026
17 Jul 2026
10 Jul 2026
15 Jun 2026 - 22 Jun 2026
25 Jun 2026
SCHEDULE 'A' PART IA (TO BE QUOTED BY THE CONTRACTOR) is not prepriced by MES and prepriced rates indicated as blank under col 5 signifies this fact only. Bidders shall insert their lumpsum amount of BOQ Ser item Nos. 1 to 102 in the Green coloured field under Col-6 only. Note: The quoted rates against the items under this schedule are deemed to include for the provisions contained in Scope of Work and Sch 'A' Notes. Ref Sch 'A' Notes complete before quoting these items. Structural designs and architectural/ structural drawings for structures and foundations for the buildings/ structures shall be prepared to comply with the provisions for design and analysis of RCC structures as per latest editions of relevant IS Codes.
Schedule ‘A’ Part IA BUILDINGS/ STRUCTURES (TO BE QUOTED BY THE CONTRACTOR)
Lumpsum price worked out for Design and Construction of ATC Complex (G+4) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of ATC / Met Store (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sanitary Annexe (S/S) for ATC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Kerosene Oil Store (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Pyrotechnic Store (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Met Hydrogen Store Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of ATC Rescue and Safety Fire Fighting Complex (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of AC Plant Room & Pump House (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of CFT Garrages (S/S) for ATC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of MRS (Mechanical Runway Sweeper) (S/S) for ATC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for four wheeler Parking for ATC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Two Wheeler Parking for ATC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of PEB Combat Sqn Hangar (S/S) with internal dimension of 70m x 75m on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Annexe of Hangar (D/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Annexe of Hangar (D/S) & DSS Hut on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for four wheeler parking for Annexe of Hangar on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for two wheeler parking for Annexe of Hangar on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of POL Store (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Ground Eqpt Bay (S/S) for Hangar on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sub Station (S/S) for Annexe on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Roled Eqpt Bay (S/S) for Hangar on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of FDP (Armanent Store) (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of ASV Garrages (S/S) for Sqn on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of CEO Complex (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage (S/S) shed for four wheeler parking for CEO complex on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage (S/S) shed for two wheeler parking for CEO complex on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Station Armoury with Administrative Bldg (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of DSC Guard Rest Room with bath facilities (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Bldg Weapon Proving Area (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sentry Post Bldg (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for four wheeler parking for station Armoury on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of SE (L) Section (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for four wheeler & two wheeler parking for SE (L) Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Safety / Survival Eqpt Bays, Office for staff & plant room (S/S) with veriable ceiling height having from 3.2 Mtr to 18.0 Mtr on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Fuel Storage Facilities (Refuling Section) & POL / Tool / Spares room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garrages for Refuelling Parking (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Battery Charging Room & Charging Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of MT Section (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of POL Store (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Vehicle Ramp on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Washing Platform on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garrages for MT (S/S) Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Repair Bay incl Vehicle Inspection Pit (S/S) for MT Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed for Four & two wheeler parking (S/S) for MT Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Logistic Section with Admin Offices (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Ramp incl Platform on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Logistic Section for Storage of Aerolubes (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Compressed Gas Shed (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four & two wheeler parking for Logistic Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Duty Crew Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garrages for GHE / ASV (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Specialist Scientific Laboratory (S/S) for Aircraft on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of AC Plant Room (S/S) for Specialist Scientific Laboratory for Aircraft on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Air Crew Lounge (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four wheeler parking for Air Crew Lounge on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Vehicle Refuelling Point (S/S) Panel Room on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Station HQ / Admin Bldg (D/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Other / Storage Accn for Stn HQ (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sentry Post Bldg for Stn HQ (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Orderly Offr & Orderly Sgt Office Cum Rest Room / Duty Clerk Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four & Two wheeler parking for Station HQ on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Station Medicare Center with Ambulance Parking Shed (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Station Health Organisation (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four wheeler parking for Station Health Organisation on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Two wheeler parking for Station Health Organisation on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Guard Room for Security Section (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Main Guard Room (Guard House & Ancillaries) (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sub Guard Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of DSC rest room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sentry Post Bldg (S/S) for security section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four wheeler parking for Security Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Two wheeler parking for Security Section on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Covered Shelter at Main Entrance Gate for Security Section (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Sentry Post Bldg (S/S) for DSC on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Drying & Ironing Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Gas Agency Office (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Gas Agency Godown (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of STP bldg (S/S) (Panel cum Operator Room) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Officer Mess 104 Officers (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Servant Qtr (01 Block of 04 Qtr) for officer mess (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Servant Qtr (01 Block of 03 Qtr) for officer mess (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Airmen Mess for 250 Nos, SNCO's Mess & Club for 175 Nos & DSC Mess for 90 Nos with seperate Dinning Hall and Cook House (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single Accn for Fly Officer / Fly Lt 01 No (S/S) with Servant Quarter and Garrage on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single JCO's Accn 03 Nos (D/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four wheeler & Two wheeler parking for Single JCO's Accn on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single Accn for SGT (D/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Garage Shed (S/S) for Four wheeler & Two wheeler parking for Single Accn for SGT on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single Accn for Airmen (Cpl-27, AC / LAC-64, Total-91 Nos) (G+1) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garage shed (S/S) for Scooter parking for Single Accn for Airmen on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garage Shed (S/S) for Car parking for Single Accn for Airmen on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single Accn for DSC Accn (01 for JCO's & 89 for DSC Accn) 90 Nos (G+1) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Garage for Four wheeler & Two wheeler parking for Single Accn for DSC (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Block of Single Accn for IAF / P 06 Nos (S/S) with Garrages on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of 01 Blocks of Single Accn for NCs(E) 17 Nos (Stilt+2) with Garrages on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Open Car Garrages (S/S) for Officer Mess on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Md Accn for Sqn Leader to Cmde (S/S) with Servant Qtr and Garrages (01 Block of 01 Qtr) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Md Accn for Sqn Leader to Cmde (S/S) with Servant Qtr and Garrages (01 Block of 02 Qtr) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Md Accn for Sqn Leader to Cmde (D/S) with Servant Qtr and Garrages (01 Block of 04 Qtr Md) EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Md Accn for Flt Lt and Equivalent (S/S) with Servant Qtr and Garrages (01 Block of 02 Qtr) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Md Accn for Flt Lt and Equivalent (D/S) with Servant Qtr and Garrages (01 Block of 04 Qtr) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Vehicle Refuelling Point Panel Room (S/S) on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
Lumpsum price worked out for Design and Construction of Covered Shed for EV (S/S) Charger with plinth for mounting of charging machine on EPC mode including all including all excavation & earth work in any type of soil, levelling of ground by filling-cutting to obtain desired modified ground level, internal services, rendering on ceiling, internal & external surfaces details etc as listed in Schedule ‘A’ Part IA complete all as specified in scope of work, Sch 'A' Notes, drawings, specifications and other parts of tender documents as directed.
NOTE: Schedule ‘A’ Part IB to XXV under Ser No. 103.00 to 127.00 are prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Lump sum price worked out for BUILDINGS/ STRUCTURES as listed in Sch 'A' Part-IB
Lump sum price worked out for EXCAVATION, EARTH WORK AND SITE CLEARANCE as listed in Sch 'A' Part-II
Lump sum price worked out for TARMAC/ DISPERSAL as listed in Sch 'A' Part III
Lump sum price worked out for ROAD/ PATH/ HARDSTANDING/ CULVERT as listed in Sch 'A' Part IV
Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A' Part V
Lump sum price worked out for SEWAGE DISPOSAL AND SEWER NETWORK as listed in Sch 'A' Part VI
Lump sum price worked out for INTERNAL ELECTRIFICATION HANGAR as listed in Sch 'A' Part-VII
Lump sum price worked out for INTERNAL ELECTRIFICATION & EV CHARGING FOR TUBULAR PARKING SHED OF TECH ACCN as listed in Sch 'A' Part VIII
Lump sum price worked out for AIR CONDITIONING as listed in Sch 'A' Part IX
Lump sum price worked out for COOLING APPLIANCES as listed in Sch 'A' Part X
Lump sum price worked out for STAND BY DG SET AND EOT CRANE as listed in Sch 'A' Part XI
Lump sum price worked out for HOT WATER SUPPLY as listed in Sch 'A' Part-XII
Lump sum price worked out for LIFT as listed in Sch 'A' Part XIII
Lump sum price worked out for LIGHTENING PROTECTION as listed in Sch 'A' Part XIV
Lump sum price worked out for FLAME PROOF INTERNAL ELECTRIFICATION as listed in Sch 'A' Part XV
Lump sum price worked out for CHEMICAL & STATIC EARTHING as listed in Sch 'A' Part XVI
Lump sum price worked out for FIRE FIGHTENING SYSTEM as listed in Sch 'A' Part XVII
Lump sum price worked out for TELEPHONE CONDUIT as listed in Sch 'A' Part XVIII
Lump sum price worked out for SOLAR POWER PLANT AND ROOFTOP SOLAR as listed in Sch 'A' Part XIX
Lump sum price worked out for EV CHARGER as listed in Sch 'A' Part XX
Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part XXI
Lump sum price worked out for EXTERNAL ELECTRIFICATION as listed in Sch 'A' Part XXII
Lump sum price worked out for SEWAGE TREATMENT PLANT as listed in Sch 'A' Part XXIII
Lump sum price worked out for RECYCLING TREATMENT OF SEWER WATER as listed in Sch 'A' Part XXIV
Lump sum price worked out for FENCING/ BOUNDARY/ GATE as listed in Sch 'A' Part XXV
SCHEDULE 'A' PART - XXVI MISCELLANEOUS ITEMS is not prepriced by MES and prepriced rates indicated blank under column 5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.
TARMAC/ DISPERSAL
Material and labour for 280 mm thick Pavement Quality Concrete (PQC) of minimum 28 days field flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15- 2017, coarse aggregate of clean, hard, strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC shall be laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 and Table 9 of IRC:15-2017. (Links for Hangar-1030.40 Cum, PQC dispersal-2751.84 Cum)
Material and labour for 150 mm thick Pavement Quality Concrete (PQC) of minimum 28 days field flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15- 2017, coarse aggregate of clean, hard, strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240°C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC shall be laid, spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tining by texturing cum curing machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 and Table 9 of IRC:15-2017. (PQC pavement for mike-1678.95 Cum, Radar Ramp-300 Cum)
Notes for item Nos. 128 & 129 :- (i) The admixture as per approved design mix shall be added and mixed.The cost of admixture required shall deemed to be included in the quoted rate. (ii) The Cost of polyester triangular non circular synthetic fibres as secondary reinforcement added and mixed in concrete shall be measured and paid separetly under respective items as Supply only. (iii) Construction joints, dummy joints (contraction joints) and expansion joints shall be measured and paid separately under respective items. (iv) Deduction shall be made in PQC of quantity for expansion joints. (v) Trimming of vertical edges of construction joint (longitudinal and transverse) shall be carried out using sawing machine to maintain straight edge before laying of adjacent/ subsequent lane. The quoted rates shall be deemed to be inclusive of this provision and nothing extra shall be paid on this account. (vi) For the purpose of pricing this item, the cement content shall be considered as 360 kg/cum. However actual cement content shall be worked out as per design mix and nothing extra shall be paid on this account. (vii) Curing compound shall be applied at the paving stage after broom finish and surface is dry, and rate for spray of curing compound as per manufacturer instruction. The cost of curing compound and its application shall be deemed to be included in the quoted rate. (viii) The quoted rate shall be inclusive of use and waste of formwork for total thickness. (ix) At locations like link fillets, small areas etc where the slip form paver cannot be used for laying, fixed form paver with minimum 5m width can be used.
Supply only polyester non-circular virgin synthetic monofilament (polyester type) triangular fibres 12 mm long with equivalent fibre diameter 15-40 micron, designed for minimum melting point of 250 degree C, minimum tensile strength 300 MPa, minimum secant modulus 6*103 Mpa, minimum ultimate elongation 15%, minimum glass transition temp 80 deg celsius, minimum intrinsic viscosity 0.60 dl/gm, aspect ratio 450 to 800 and having specific gravity of 1.34 to 1.39 complete all as specified and directed. (Links for Hangar-1030.40 Kg, PQC dispersal-2751.84 Kg, PQC pavement for mike-1678.95 Kg, Radar Ramp-300 Kg)
ROAD/ PATH/ HARDSTANDING/ CULVERT
Material and labour for 200 mm thick (compacted thickness) Granular Sub Base (GSB) stabilised using cement forming Cement Treated Sub Base (CTSB) using granite, basalt, or trap stone coarse aggregates of grade IV grading as per MoRTH, Table 400-1, stabilised using cement OPC-43 Grade cement content @ 2% (exact quantity of cement to be finalized during design mix stage), mixed in mechanical mix plant at OMC arrived during the design mix stage; deposited, spread in uniform layer with mechanical paver and levelled in layers not exceeding 200 mm thick, compacted using 8 to 12 tonne vibratory roller to achieve minimum 7 day UCS 1.5 - 3.0 Mpa desired density 98% density as per MoRTH 5th edition clause 401 complete all as specified and directed. Note: For the purpose of pricing this item, the cement content shall be considered as 2%. However actual cement content shall be worked out as per design mix and nothing extra shall be paid on this account. Minus price adjustment shall be made @ Rs 6.91 per kg in case of quantity of cement used less than @ 2% by weight of Design Mix (Quantity for Road 3.75mtr wide-1729.50 Cum, Road 5.50mtr wide-6294.03 Cum)
Material and labour for 150 mm thick (compacted thickness) Granular Base Course stabilised using cement forming Cement Treated Base (CTB) using granite, basalt, or trap stone coarse aggregates of grading as per MoRTH (5th revision), Table 400-4, stabilised using cement OPC-43 Grade cement content @ 3% (exact quantity of cement to be finalized during design mix stage), mixed in mechanical mix plant at OMC arrived during the design mix stage; deposited, spread in uniform layer with mechanical paver and levelled in layers not exceeding 150 mm thick, compacted using 8 to 12 tonne vibratory roller to achieve minimum 7 day UCS 4.5 - 7.0 Mpa desired density 98% density as per MoRTH 5th edition clause 401 complete all as specified and directed. Note: For the purpose of pricing this item, the cement content shall be considered as 3%. However actual cement content shall be worked out as per design mix and nothing extra shall be paid on this account. Minus price adjustment shall be made @ Rs 6.91 per kg in case of quantity of cement used less than @ 3% by weight of Design Mix (Quantity for Road 3.75mtr wide-1297.13 Cum, Road 5.50mtr wide-4720.52 Cum)
Material and labour for providing stress absorbing membrane interlayer (SAMI) in accordance to clause 517 of MoRTH over the CTB layer with elastomeric modified binder (PMB-76-10 ISI marked as per IS-15462-2019) @ 1.2 kg/sqm as per IRC-37-2018 and dry stone chipping of size 11.2 mm sprayed @ 0.01 cum/sqm using hydraulic chip spreader sweeping the surface for uniform spread of aggregate and rolled by pneumatic roller complete all as specified and directed. (Quantity for Road 3.75mtr wide-864.75 XSqm, Road 5.50mtr wide-3147.02 XSqm)
M & L for Precast cobble stone paving 80mm thick of any shape and size, quality stone type : Granite/Basalt/Limestone meeting compressive strength, water absorption and durability requirements laid over a prepared sub-base leveling, and sand cushioning with proper alignment, jointing and compaction to achieve a uniform, durable and non-slip surface. Joints to be filled with mortar/sand as directed, including edge restraints, finishing, curing, and cleaning complete all as specified and directed. (Note: Sub base and sand cushioning shall be paid in seperate item.)
M & L for Precast cobble stone paving 60mm thick of any shape and size, quality stone type : Granite/Basalt/Limestone meeting compressive strength, water absorption and durability requirements laid over a prepared sub-base leveling, and sand cushioning with proper alignment, jointing and compaction to achieve a uniform, durable and non-slip surface. Joints to be filled with mortar/sand as directed, including edge restraints, finishing, curing, and cleaning complete all as specified and directed. (Note: Sub base and sand cushioning shall be paid in seperate item.)
Providing and laying non-woven geotextile of 300 Gm / Sqm from high quality polypropelene stable fibres below dry stone on roadside berms, including fibres are mechanically bonded through needle-punching to form a strong, flexible and dimensionally stable fabric structure, with optimum pore sizes and hgh permeability, resistant to chemical, biological organisms, ultra voilet radiation and stabilised against degradation having thickness @ 2Kpa, >/3.0, tensile strength >/16kn/mtr, tensile elongation % >/50, CBR Puncture resistance >/3000 N and all incidental works complete all as specified as per manufacture instruction and directed. (Qty for Stone pitching-8940.89 Sqm, Cycle track-10035.00 Sqm)
M & L for applying Cold Applied Plastic road marking paint to a thickness of 2mm over bituminous or synthetic resin based primer on concrete surfaces of vibrant colors (like green or red ) and high durability markings as lane lines, symbols etc of approved colour (red/ white/ yellow/ black/ green) with glass beads as per IRC night time retro reflectivity standards @ 250-300g/m2 immediately after painting using spray/ roller/ brush as directed/ Manufacturers instructions including surface preparation, uniform application, curing, ensuring high visibility, skid resistance and long lasting performance complete all as specified and directed.
Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads/ pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and directed. (Qty for Bitumen road 3.75 mtr - 599.56 XRm, Bitumen road 5.50 mtr - 1487.68 XRm)
SEWAGE DISPOSAL AND SEWER NETWORK
Supply, laying and testing of Double Wall Corrugated (DWC) high density Polyethylene (HDPE) pipes ISI marked with IS : 16098 (Part-II) having corrugation on the outer wall with nominal outer dia 180mm and plain surface on the inner wall with nominal inner dia 163mm dia laid as per IS 14930 (Part I & II) for sewage line laid in trenches complete all as specified and directed.
S & F On site LLDPE sub ground structure septic tank of capacity 1600 litres in one single unit, anaerobic type of domestic/semi commercial unit of dia 1440 mm, height 1550 mm with BOD reduction upto approx 70% of the incoming sewage rotationally moulded with molded in lifting eyes for handling and installation with provisions of manhole cover flexible in & outlet pipe designed to carry seawge and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. with upflow filter including media complete all as specified and directed as per manufacturer instructions the following features shall be as follows:- (a) Durable (b) 100% eco friendly (c) Light weight (d) Rust proof/leak proof/corrosion proof/ not prone to cracking (e) Completely water and air tight
S & F On site LLDPE sub ground structure septic tank of capacity 3000 litres in one single unit, anaerobic type of domestic/semi commercial unit of dia 1900 mm, height 2020 mm with BOD reduction upto approx 70% of the incoming sewage rotationally moulded with molded in lifting eyes for handling and installation with provisions of manhole cover flexible in & outlet pipe designed to carry seawge and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. with upflow filter including media complete all as specified and directed as per manufacturer instructions the following features shall be as follows:- (a) Durable (b) 100% eco friendly (c) Lightweight (d) Rust proof/leak proof/corrosion proof/ not prone to cracking (e) Completely water and air tight
S & F On site LLDPE sub ground structure septic tank of capacity 4000 litres in one single unit, anaerobic type of domestic/semi commercial unit of dia 1970 mm, height 2080 mm with BOD reduction upto approx 70% of the incoming sewage rotationally moulded with molded in lifting eyes for handling and installation with provisions of manhole cover flexible in & outlet pipe designed to carry seawge and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. with upflow filter including media complete all as specified and directed as per manufacturer instructions the following features shall be as follows:- (a) Durable (b) 100% eco friendly (c) Lightweight (d) Rust proof/leak proof/corrosion proof/ not prone to cracking (e) Completely water and air tight
S & F On site LLDPE sub ground structure septic tank of capacity 5000 litres in one single unit, anaerobic type of domestic/semi commercial unit of dia 1970 mm, height 2080 mm with BOD reduction upto approx 70% of the incoming sewage rotationally moulded with molded in lifting eyes for handling and installation with provisions of manhole cover flexible in & outlet pipe designed to carry seawge and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. with upflow filter including media complete all as specified and directed as per manufacturer instructions the following features shall be as follows:- (a) Durable (b) 100% eco friendly (c) Lightweight (d) Rust proof/leak proof/corrosion proof/ not prone to cracking (e) Completely water and air tight
S & F On site LLDPE sub ground structure septic tank of capacity 10000 litres in one single unit, anaerobic type of domestic/semi commercial unit of dia 1970 mm, height 2080 mm with BOD reduction upto approx 70% of the incoming sewage rotationally moulded with molded in lifting eyes for handling and installation with provisions of manhole cover flexible in & outlet pipe designed to carry seawge and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. with upflow filter including media complete all as specified and directed as per manufacturer instructions the following features shall be as follows:- (a) Durable (b) 100% eco friendly (c) Lightweight (d) Rust proof/leak proof/corrosion proof/ not prone to cracking (e) Completely water and air tight
Material and labour for construction of soakage well (1.2m dia x 3.0m effective depth) including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete inclding intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats complete as per drawing No. CEAA/TD/80 Sht Nos. 1/2 and 2/2 all as specified and as directed.
Material and labour for construction of soakage well (1.8m dia x 3.0m effective depth) including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete inclding intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats complete as per drawing No. CEAA/TD/80 Sht Nos. 1/2 and 2/2 all as specified and as directed.
Material and labour for construction of soakage well (2.4m dia x 3.0m effective depth) including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete inclding intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats complete as per drawing No. CEAA/TD/80 Sht Nos. 1/2 and 2/2 all as specified and as directed.
Supply and fix precast Steel Fibre Reinforced Concrete (SFRC) solid Manhole cover with frame medium duty & cover size 750 x 1200 x 70mm & clear opening 600mm with 15 tons load capacity complete all as specified and directed.
Survey, Investigation, Design, Procurement, Construction, Testing and Commissionning of Sewer Network, from the 1st Manhole of buildings listed in Annexure'A' to the Sewage Treatment Plant broadly using the gravity flow methodolgy for conveyance of soil, waste and other deleterious discharge from the bldgs complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 1.00.
AREA DRAINAGE
Providing & Laying of Factory made Precast U Shape Drain of size 450 x 450, thickness 130 mm jointed and pointed in CM (1:3), Perforated Lid should have T-25 load carrying capacity ISI marked, having high Performance self compacting concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/Fe 500 D shall be used for reinforcement. Lid should have antiskid finish at top complete all as specified and directed.
Providing & Laying of Factory made Precast U Shape Drain of size 450 x 450mm, thickness 130 mm jointed and pointed in CM (1:3), ISI marked having high Performance self compacting concrete of M-40 cylinder strength/ M-50 cube strength complete all as specified and directed.
Providing & Laying of Factory made Precast U Shape Drain of size 600 x 600mm, thickness 130 mm jointed and pointed in CM (1:3), Perforated Lid should have T-06 load carrying capacity, ISI marked. The Fe 500/Fe 500D shall be used for reinforcement. Lid should have antiskid finish at top complete all as specified and directed.
Supply and fix precast RCC BOX Culvert, M-50 grade, of internal size 500 x 500mm each piece of drain 2.0 mtr long, ISI marked and jointed and pointed in CM 1:3 as in cover drain complete all as specified and directed.
Providing & Laying of Factory made Precast U Shape Drain of size 750 x 750mm, thickness 130 mm jointed and pointed in CM (1:3), Perforated Lid should have T-06 load carrying capacity, ISI marked. The Fe 500/Fe 500 D shall be used for reinforcement. Lid should have antiskid finish at top complete all as specified and directed.
INTERNAL ELECTRIFICATION HANGAR
S & F for LED highbay light luminaire of capacity 200 watts, energy saving new generation environmental friendly long life versatile presure die cast housing and heat sink in aluminium extrusion integrated PC optics and 150 lm/ W efficacy, 4 kV in-built and 10 kV external surge protection, IP66 ingress protection and electronic driver with pre wired and necessary provision of fixing arrangements for ceiling with MS clamp, bolts and nuts and electrical connection upto fitting teriminal complete all as directed .
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and LED light driver of capacity 120 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting with warranty option of 5 years from date of installation including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.
S & F for LED aviation obstruction light fitting on top of Hanger with Red colour 20 watts, 230 Volts, 50 Hz, Ac, IP 65 protection, vermin, dust & weather proof LM6 body self contained wire with necesary electrical connections complete all as specified and as directed.
Supply and fix Air Turbo Ventilator made out of SS-304 ,base dia 21'', exhaust dia 28'', blades-36 nos with skylight sheet complete all as specified and as directed.
S & F for heavy duty Air Circulator fan with air delivary 300 Cum per Hour with colour- parrot green, 03 Nos all alloy blades, AC, single phase, 230 Volts, 50Hz, 600 mm sweep (star rated) as per BIS, 1450 RPM, other necessary accessories and electrical connections from ceiling rose to fan teriminal and fixing to walls or steel gridders/ structures along with clamps, MS plate with bolt and nuts complete all as specified and directed.
S & F for TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection & TPN MCB out going fixed on wall/ floor with necessary cement work and electrical connections complete all as specified.
S & F for sheet metal enclosure MCB DB TPN 12 way with 200 Amps rated bus bar 415 volts double door vertical type, IP-43 protection with magnitic locking system vertical type including necessary provision for inserting MCB TPN as incommer & MCB SPN for out going and the DB fixed on hanger trusses/ pillars including fixing arrangements complete all as specified and as directed.
S & F for 4 pole MCCB 125 Amps with adjustable thermal magnetic release type 415 Volts, Ics = 50% Icu, breaking capacity 36 KA including all fixing accessories with both ends spreader links complete all as specified and as directed.
Supply and fix wall socket IP 54, 415 Volts AC, 32 Amp, 3P+N+E, blue colour flanged type 6h coded protected socket integration setup complete all as specified and as directed.
FLAME PROOF INTERNAL ELECTRIFICATION
S & F for Flame proof brass unions suitable for 20 mm ERW conduit, duly certified by CMRI Dhanbad complete all as specified.
S & F for Flame proof brass bends suitable for 20 mm ERW conduit, duly certified by CMRI Dhanbad complete all as specified.
S & F for Flame proof closing plugs suitable for ERW 20 mm dia conduit duly certified by CMRI Dhanbad complete all as specified.
S & F flame proof /Weatherproof 4 way junction box with 4 Nos terminal, 100 mm dia for looping in and looping out connections, duly certified by CMRI Dhanbad complete all as directed
S & F flame proof Sheet steel metal enclosure of size 330 x 350 x 190 mm, CMRI certified distribution box , 8 Way 240 Volts with MCCB 2 Pole, 32 Amps-1 No, Outgoing MCB SPN, 240 Volts 5-32 Amps- 3 Nos complete with internal Bus Bar & wiring upto terminal, duly certified by CMRI Dhanbad complete all as directed
S & F flame proof Sheet steel metal enclosure of size 480 x 480 x 250mm, CMRI certified distribution box , 8 Way 415 Volts with MCCB 4 Pole, 63 Amps-1 No, Outgoing MCB SPN, 240 Volts 5-32 Amps- 12 Nos complete with internal Bus Bar & wiring upto terminal, duly certified by CMRI Dhanbad complete all as directed
S & F for Flameproof/ weatherproof LED security light fitting 60 Watt , IP66 protection of Cast Aluminum alloy in LM6 material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired duly certified by CMRI Dhanbad including flame proof flexible metallic conduit with necesary electrical connections complete all as specified and directed
Supply and fix flame proof Ceiling fans of 1200 mm (48") sweep , single phase motor, 230 volts, 50 Hz, including flame proof flexible metallic conduit with necesary electrical connections complete all as specified and as directed.
Supply and fix flame proof/weather proof exhaust fan of 300 mm (12") sweep with 0.25HP motor, 230 volts single phase, 50 Hz, with provn pf louvers and bolts nuts and washers including flame proof flexible metallic conduit with necesary electrical connections complete all as specified and as directed.
CHEMICAL EARTHING FOR VARIOUS SCHEDULES
M & L for maintenance free Chemical earthing of technology with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed. (Qty for IES Hangar-10, IES tubular parking-25, Air Conditioning-28, Stand By DG Set-24, EOT Crane-6, Lift-4, Lightening Protection-116, Flameproof IES-10, Fire fightening-32, Solar power plant-12, EV charger-12, EES-66, STP-20, Recycling treatment of sewer water-2)
Note:- (i) Earthing is to be done infront of the Engr-in-Charge. (ii) Test Results of earthing to be submitted by the contractor for all earthings. (iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 (ten) years after certified date of completion and shall be deposited 2000/- per earthing as security deposit for a period of Ten (10) Years. (iv) Failing to maintain resistance of earthing less than 01.0 ohm , new earthing to be provided by the contractor with out any extra cost. (v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surronding area complete.
M & L for maintenance free Chemical earthing of technology with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed.
Note:- (i) Earthing is to be done infront of the Engr-in-Charge. (ii) Test Results of earthing to be submitted by the contractor for all earthings. (iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 (ten) years after certified date of completion and shall bdeposited 2000/- per earthing as security deposit for a period of Ten (10) Years. (iv) Failing to maintain resistance of earthing less than 1.0 ohm , new earthing to be provided by the contractor with out any extra cost. (v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surronding area complete.
AIR CONDITIONING
Supply and install hi wall Split type AC unit indoor/ outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangements and Digital Inverter twin rotary of capacity 2.0 TR all including moutning bracket for outdoor unit, suitable size of copper piping from indoor to outdoor unit, and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete system for smooth functioning of split AC up to satisfactioning, 5 star rating, working with Non CFC refrigerent and provn of suitable size electrical connection from indoor to outdoor unit including necessary cutting on wall for copper piping and make good with putty/ cement and painting etc complete as specified and directed
Supply and install for Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and as directed.
M & L for design, supply, installation, commissioining and testing of precision air conditioning complete with all accessories all as specified for the following capacaity for 24 hours operation complete all as specified and directed.
All as per item no. 177 for 2 x 7.50 TR capacity (01 Nos working and 01 Nos Stand by) (For Annexe Hanger)
All as per item no. 177 for 2 x 5.50 TR capacity (01 Nos working and 01 Nos Stand by) (For Annexe Hanger)
All as per item no. 177 for 2 x 4.50 TR capacity (01 Nos working and 01 Nos Stand by) (For Annexe Hanger)
All as per item no. 177 for 2 x 2.0 TR capacity (01 Nos working and 01 Nos Stand by) (For Scientific Lab)
All as per item no. 177 for 2 x 1.25 TR capacity (01 Nos working and 01 Nos Stand by) (For Scientific Lab)
For detailed description of above item nos. 177.00 to 177.05 refer Annexure'A' to BOQ para no. 2.00.
M&L for design, supply, installation, commissioning and testing of Chilled water type Air Conditioning plant complete with all accessories all as specified for ATC Building for Areas hatched in the drawing and marked as AC to meet design parameters given in Annexure ‘A’ having min capacity 3 x 15 TR (02 Nos working and 01 No Stand by) for 24 Hours operation complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 3.00.
Manning & operation and comprehensive maintenance Outsourcing services for running of Central AC Plant of capacity 3 x 15 TR installed at ATC Bldg (2 working and 1 standby) with One No Refg Mech (Skilled) in Three shifts per day 8 Hours per shift (Morning, Evening & Night), including Sundays & holidays, situated at Air Force Station Deesa, comprising of Chiller plant, compressors, motors, pumps, AHU, Condensors, HVAC Panel and the connected equipments for its smooth functioning including cleaning of installation plant including cutting of grass from plant yard and surrounding area and maintain record of running of plant on described printed log sheet approved by the Engineer- in- charge, logsheet shall be provided by the contractor, routine maintenance and other minor repair / rectification of all machine and equipments as and when required to ensure serviceability of plant comprising of the following complete all as specified and directed.
Note: The services to be provided shall be all as specified in perticular specification along with the following : (a) Operation of HVAC Panels, pumps,Starters, Changeover daily all as directed (b) Operation of DG Set upto 200 KVA in case of mains failure immediate or as and when asked by MES reps. (c) Maintenance of DG Set including checking of oil level, water in radiator, cleaning of DG set on daily basis. Helping MES for filling Deisel & intimating the deisel position/balance in prior. (d) Tightening the nut and bolt of cable terminal end, making new lugs of burnt calbe connections in LT panel. (e) cleaning the vegetation in surrounding area of the installation as directed by EIC. (f) Filling Gland / seal in water pump (g) Operation and maintenance of humidifier & de- humidifier (h) Checking the serviceability of street/security light of complete area alongwith connected DG set & intimating to MES about the unserviceable light fittings and DG Set on daily basis and Switch on and off DG set connected to Perimeter light manualy as and when inform by MES Rep. (j) Intimating about water leakage in OHT if any at nearby location of AC plant. (a) SHIFT DUTY (TIMMINGS):- (i) Morning Shift : 0600 Hours to 1400 Hours, (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.
All as per item no. 179.00 but for First year (Under Defect Liability Period).
All as per item no. 179.00 but for Second year (Under Defect Liability Period).
All as per item no. 179.00 but for Third year (First year after completion of Defect Liability Period).
All as per item no. 179.00 but for Fourth year (Second year after completion of Defect Liability Period).
All as per item no. 179.00 but for Fifth year (Third year after completion of Defect Liability Period).
All as per item no. 179.00 but for Sixth year (Fourth year after completion of Defect Liability Period).
All as per item no. 179.00 but for Seventh year (Fifth year after completion of Defect Liability Period).
M&L for design, supply, installation, commissioning and testing of Chilled water type Air Conditioning plant complete with all accessories all as specified for Safety/Sevival Bay Building for Areas hatched in the drawing and marked as AC to meet design parameters given in Annexure ‘A’ having min capacity 3 x 20 TR (02 Nos working and 01 No Stand by) for 24 Hours operation complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 4.00.
Manning & operation and comprehensive maintenance Outsourcing services for running of Central AC Plant of capacity 3 x 20 TR installed at Safety/Service Bay (2 working and 1 standby) with One No Refg Mech (Skilled) in Three shifts per day 8 Hours per shift (Morning, Evening & Night), including Sundays & holidays, situated at Air Force Station Deesa, comprising of Chiller plant, compressors, motors, pumps, AHU, Condensors, HVAC Panel and the connected equipments for its smooth functioning including cleaning of installation plant including cutting of grass from plant yard and surrounding area and maintain record of running of plant on described printed log sheet approved by the Engineer- in- charge, logsheet shall be provided by the contractor, routine maintenance and other minor repair / rectification of all machine and equipments as and when required to ensure serviceability of plant during DLP (Defect Liability period) for 02 Years comprising of the following complete all as specified and directed .
Note: The services to be provided shall be all as specified in perticular specification along with the following : (a) Operation of HVAC Panels, pumps,Starters, Changeover daily all as directed (b) Operation of DG Set upto 200 KVA in case of mains failure immediate or as and when asked by MES reps. (c) Maintenance of DG Set including checking of oil level, water in radiator, cleaning of DG set on daily basis. Helping MES for filling Deisel & intimating the deisel position/balance in prior. (d) Tightening the nut and bolt of cable terminal end, making new lugs of burnt calbe connections in LT panel. (e) cleaning the vegetation in surrounding area of the installation as directed by EIC. (f) Filling Gland / seal in water pump (g) Operation and maintenance of humidifier & de- humidifier (h) Checking the serviceability of street/security light of complete area alongwith connected DG set & intimating to MES about the unserviceable light fittings and DG Set on daily basis and Switch on and off DG set connected to Perimeter light manualy as and when inform by MES Rep. (j) Intimating about water leakage in OHT if any at nearby location of AC plant. (a) SHIFT DUTY (TIMMINGS):- (i) Morning Shift : 0600 Hours to 1400 Hours, (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.
All as per item no. 181.00 but for First year (Under Defect Liability Period).
All as per item no. 181.00 but for Second year (Under Defect Liability Period).
All as per item no. 181.00 but for Third year (First year after completion of Defect Liability Period).
All as per item no. 181.00 but for Fourth year (Second year after completion of Defect Liability Period).
All as per item no. 181.00 but for Fifth year (Third year after completion of Defect Liability Period).
All as per item no. 181.00 but for Sixth year (Fourth year after completion of Defect Liability Period).
All as per item no. 181.00 but for Seventh year (Fifth year after completion of Defect Liability Period).
M & L for design, supply, installation, commissioning and testing of chemical dehumidifier having a handling capacity of 1500 CFM, complete with all accessories, heaters, filters, motors, control panel and ducting connection as required for efficient operation complete all as specified for 24 Hours operation complete all as specified and directed. (for Main Parachute Drying Bay and Rubberised Store). For detailed description of item refer Annexure'A' to BOQ para no. 5.00.
M & L for design, supply, installation, commissioning and testing of Hot Air Generator for drying/ curing applications with air temperature up to 90 degree C and heater rating 15 KW/ 440 volts Air volume not less than 600 CFM at 90 degree C and 100 mm water guage, Air blower will be direct driven 1.5 Hp -3P motor of reputed make to drive the blower assembly outlet pipe 150mm square with suitable flange outlet pipe will have MI Thermocouple in the line with SSR driven PID control panel MOC Body with blower unit & control panel made of MS duly powder coated complete all as specified for 24 Hours operation complete all as specified and directed. (for Pilot & Brake Parachute Drying Bay) For detailed description of item refer Annexure'A' to BOQ para no. 6.00.
COOLING APPLIANCES
Supply and Install for Refrigerator, electric driven (single phase), capacity of 360/363 Litres convertible plus fridge with inverter linear compressor BEE 5 star rated working with Non CFC refrigerent gas, including neccesary accessories complete all as specified and directed.
Supply andInstall for Refrigerator, electric driven (single phase), capacity of 308/310 Litres convertible plus fridge with inverter linear compressor. BEE 5 star rated working with Non CFC refrigerent gas including neccesary accessories complete all as specified and directed.
S & F wall mounted type line- Voltage stabilizer of capacity 1.0 KVA for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with output voltage stabilizer at 230 Volts with accrracy of +/- 2.5 and speed of correction 8 volt per second.
S & F wall mounted type line- Voltage stabilizer of capacity 2.0 KVA for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 Volts to 250 Volts with output voltage stabilizer at 230 Volts with accrracy of +/- 2.5 and speed of correction 8 volt per second.
STAND BY DG SET
Supply, install, testing and commissioning of Diesel Engine driven generating set of capacity 400 KVA, 3 Phase, 4wire, 415 Volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design there by facilitating / easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board for latest norms/ regulation and lowest exhaust emissions meets with new generation with CRDI STD of CPCB-IV+, ISO 8728/ Noise pollution norms of MoEF & certified by ARAI, Pune with fuel tank, battery and standard accessories, acoustic enclosure, vibration pad, tools and spare,as provided by manufacturer, PCC foundation as per OEM complete all as specified and directed. (for Hanger & Annexe, ATC) For detailed description of item refer Annexure'A' to BOQ para no. 7.00.
Supply, install, testing and commissioning of Diesel Engine driven generating set of capacity 125 KVA, 3 Phase, 4wire, 415 Volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design there by facilitating / easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board for latest norms/ regulation and lowest exhaust emissions meets with new generation with CRDI STD of CPCB-IV+, ISO 8728/ Noise pollution norms of MoEF & certified by ARAI, Pune with fuel tank, battery and standard accessories, acoustic enclosure, vibration pad, tools and spare,as provided by manufacturer, PCC foundation as per OEM complete all as specified and directed. (for SMC) For detailed description of item refer Annexure'A' to BOQ para no. 8.00.
Supply, install, testing and commissioning of Diesel Engine driven generating set of capacity 100 KVA, 3 Phase, 4wire, 415 Volts, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design there by facilitating / easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board for latest norms/ regulation and lowest exhaust emissions meets with new generation with CRDI STD of CPCB-IV+, ISO 8728/ Noise pollution norms of MoEF & certified by ARAI, Pune with fuel tank, battery and standard accessories, acoustic enclosure, vibration pad, tools and spare,as provided by manufacturer, PCC foundation as per OEM complete all as specified and directed. (For 01x STP + 02 Pump House) For detailed description of item refer Annexure'A' to BOQ para no. 9.00.
HOT WATER SUPPLY
Supply, installation, testing and commissioning Electrically operated chimney complete, including electrical connection, ducting provision as required, complete in all respects. of Size / Width: 600 mm (Suitable for 3–4 burner cook top) complete all as specified and directed. with following:- (i) Suction Capacity: 1000 m³/hr (ii) BLDC Motor Power: Approx. 180 Watts (iii) Voltage & Frequency: 230 V AC, 50 Hz, Single Phase (iv) Control Type: Motion Sensor / Manual Control (v) Speed Levels: 3 Speed Settings (vi) Filter Type: Stainless Steel / Baffle Filter (vii) Auto Clean: Heat Auto-Clean Technology (viii) Lighting: LED Lamps (ix) Noise Level: Approx. ≤63 dB (x) Body Material: Stainless Steel with Powder Coated Finish (xi) Front Panel: Toughened / Tempered Glass (xii) Mounting Type: Wall Mounted, Chimney unit with motor and filters, (xiii) LED lights,Standard mounting hardware with 10 year warranty all as directed and specified
EOT CRANE
Design, manufacturing supply, commissioning and testing of 2.0 Ton capacity double grider flame proof EOT crane, Indoor tpye 9.5 meter span, 20 mtr bay length, 3.5 mtr Hook lift pendent operated type with granty girder for Non AC shed, Class-II (medium duty) as per IS 3177, and IS 807 suitable for gas group IIA, IIB, floor operated trough independent push botton station ambient temperature 45°C complete all as specified and directed. (for - Role Equipment Storage Bay) For detailed description of item refer Annexure'A' to BOQ para no. 10.00.
Manual recue, operation rescue and Maintenance of Passenger Lifts 02 Nos installed at “ ATC Bldg” 08 passengers (544 Kgs) lift- 01 No by deploying One Lift Technician (Semi Skilled) in Three shift per day 8 Hours per shift (Morning, Evening & Night) situated at Air Force Station Deesa including Sundays & holidays and providing rescue to the trapped person and maintaining lift Panel room, lift car and connected machinery of the lifts duringduring After DLP (After Defect Liability period) for 05 Years comprising of the following complete all as specified and directed . Details of Lift Installation- (i) 08 Passenger Lift (544 Kgs)- 01 No (a) SHIFT DUTY (TIMMINGS):- (i) Morning Shift : 0600 Hours to 1400 Hours, (ii) Evening Shift : 1400 Hours to 2200 Hours & (iii) Night Shift: 2200 Hours to 0600 Hours. Note:- (i) Lift Technician (Semi Skilled) of proper trade with ITI qualified having minimum 04 years of experience of proper trade in their respective field. (ii) Contractor shall produce all qualification & experience certificates, photos and police verifications to all operators/ technicians before commencement of this contract to Engr-in-charge. After verification & satisfaction of Engr-in-charge Lift technician shall deployed in installation. (iii) The contractor should take over all equipment in serviceable condition at the time of commencement of contract and shall hand over in the same state at the time of completion of contract period. Any damage/ loss shall be made good by the contractor at the time of completion of contract. GEs decision will be final and binding. (iv) In case of any breakdown in the lift or any malfunctioning the same shall be brought to the knowledge of JE E/M/ Engr-in-chrge.
(v) In case of any technical defect more than one hour/ non-operation of Lift Installation, technician shall take immediate action for rectifying the defects and make the same functional under intimation to JE (E/M)/ Engr-in-charge. (vi) The consumable stores like grease, cotton waste, stationary, controll wire & spares etc shall be deemd to be included in the quated rate . (vii) Leave of deployed person in inescapable cases shall be allowed on prior intimation but Contractor on demand of Engineer-in-Charge, shall arrange alternate arrangment. Payment shall not be allowed for leave period. (viii) Daily cleaning of all lifts and cleaning of Lift machine room including car cabin vis floor, wall and including internal electrical fixtures and surrounding area. (ix) Monthly maintenance of Lift Installations will be carried out for smooth functioning & keeping it serviceable at all times as per OEM instructions. (x) Minor parts/ spares to be provided by the contractor to keep Lift Installation functional as per OEM instructions. (xiii) Contractor shall provided to Technician necessary Emergency lamp, hand tools, tester or test lamp, LT megger, saftey shoes and hand gloves etc with out any extra cost . (xv) Further, all saftey precautions as per lift rules should be strictly followed by the contracted technician employees & Depatment shall not be held responsible for any untowards incidents.
All as per item no. 195.00 but for First year after completion of Defect Liability Period.
All as per item no. 195.00 but for Second year after completion of Defect Liability Period.
All as per item no. 195.00 but for Third year after completion of Defect Liability Period.
All as per item no. 195.00 but for Fourth year after completion of Defect Liability Period.
All as per item no. 195.00 but for Fifth year after completion of Defect Liability Period.
FIRE FIGHTENING SYSTEM
Supply, Install, Test & Commissioning for Microprocessor based Networkable Analogue Addressable Fire Alarm Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel shall have inbuilt one loop and expandable capacity upto 2 loops. The Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/ Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger duly approved by LPCB complete all as specified and directed.
Supply, Install, Test & Commissioning for of Weatherproof Manual Call Point. The call point shall have Fast response, Non-frangible element fitted as standard (conforms to EN54), Surface mounted, IP67 rated, LPCB duly approved to EN54 complete all as specified and as directed .
Supply, Install, Test & Commissioning for Hybrid Wireless Optical Smoke Sensor with Bi-directional wireless communication, Self optimizing wireless amplitude and frequency, in-built magnet test, operating on 865 MHz with communication range of ≤ 1200 m in open air complete all as specified and as directed .
Supply, Install, Test & Commissioning for Hybrid Wireless Optical Smoke Sensor with Built in Voice Annunciator and VAD with Bi-directional wireless communication,white LED’s and 0.5 Hz flash rate, Self optimising wireless amplitude and frequency, operating on 865 MHz with communication range of ≤ 1200 m in open air, 95% RH, Primary & Secondary Power Supply, RED compliant, LPCB duly approved to EN54-3, 7, 23 & 25 c complete all as specified and as directed .
Supply, Install, Test & Commissioning for Hybrid Wireless Manual Call Point with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, Resettable Element, fully addressable and intelligent monitoring functionality operating on 865 MHz with communication range of ≤ 1200 m in open air, 95% RH (non-condensing), Up to 10 year battery life Dependant on operational usage, Primary & Secondary Power Supply, LPCB duly approved to EN54-11 & 25 ccomplete all as specified and as directed.
Supply, Install, Test & Commissioning for Hybrid Wireless Translator Module. The Module shall feature Bi-directional wireless communication, Self optimizing wireless amplitude and frequency, Loop Powered, allows the connection of up to 126* radio field devices to an addressable fire detection loop, Incorporates a Loop Short Circuit Isolator and an OLED display, operating on 865 MHz with communication range of ≤ 1000 m in open air with field devices and ≤ 2000m with Expander Module complete all as specified and as directed.
Supply, Install, Test & Commissioning for Hybrid Wireless Expander Module with Bi-directional wireless communication, Self optimizing wireless amplitude and frequency,Up to 126 Expander Modules shall be configured to any one Translator Module, Supports MESH communications, operating on 865 MHz with communication range of ≤ 1200 m in open air with field devices complete all as specified and as directed .
Supply, Install, Test & Commissioning for Hybrid Wireless Single Input Module with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, monitored input, operating on 865 MHz with communication range of ≤ 1200 m in open air, LPCB duly approved to EN54 complete all as specified and as directed .
Supply, Install, Test & Commissioning for Hybrid Wireless Sounder with Bi-directional wireless communication, Self optimising wireless amplitude and frequency, with tamper switch, operating on 865 MHz with communication range of ≤ 1200 m in open air, LPCB duly approved to EN54 complete all as specified and as directed .
Supply, Install, Test & Commissioning for Conventional Type Beam Smoke Detector with range of 70-160 mtrs and of detection range which continually corrects itself against building movement, comes with ground level controller to control, commission and maintain with advanced motorised tecchnology to allow self-alignment to the reflector, aduly approved by VdS to EN-54 complete all as specified and as directed .
Supply, Install, Test & Commissioning for copper cable of size 2 core x 1.5 Sqmm, FRLSH armoured PVC insutaled, multistraded (Red Color) complete all as specified and as directed .
S & F testing & Commission of MICRO processer with Digital Display fire control Panel with Single Panel of capacity for 99 Detector & 99 Module upto 200 detector & modules fitting with automatic battery charger including Maint free battery , including lamp with all connected accessories for following Zone complete all as specified and as directed.
All as per item no. 207.00 for '1' zone
All as per item no. 207.00 for '3' zone
All as per item no. 207.00 for '5' zone
All as per item no. 207.00 for '8' zone
M&L for anunciating devices addressable control module complete all as specified and directed.
M&L for control console complete all as specified and directed.
S & F of the following AUTO GLOW signages made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board for following, complete with mirror fasteners complete all as specified and as directed.
All as per item no. 210.00 for Fire Hose Reel etc of size- 4" X 12"
All as per item no. 210.00 for Emergency Exit of size- 4" X 12"
All as per item no. 210.00 for "DCP" Fire Extinguisher of size- 8" X 4"
All as per item no. 210.00 for "CO2" Fire Extinguisher of size- 8" x 4"
All as per item no. 210.00 for In case of Fire, do not use lift, use staircase of size- 8" x 8"
All as per item no. 210.00 for Flow Arrow Directions Sign
All as per item no. 210.00 for Other Sign Board as per fire Norms
Supply and install for Fire display board of size 1.5 Mtr (width) x 1.2 Mtr (width) made out of 3 mm thick white colour acrylic sheet supported with 12 0 mm thick ISI marked ply wood sheet covered all sides with wooden beeding with side border for duly marked with name of building with details and layout diagram and location, radiant sticker with approved colour indicating including necessary fixing arrangement on wall complete all as specified and as directed. Note :- Layout diagram and description details to be collected from Engineer-in-Charge.
S & F 4 kg capacity dry chemical powder (ABC) type fire extinguisher,conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed by the engineerin- charge.
S & F of 3 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve,discharge nozzle, bend & horn, wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed by the engineer-in-charge.
S & F for 9 litre Mechanical foam type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket / floor trolley mounting accessories along with suitable signage complete all as specified and directed.
S & F for 9 kg capacity dry chemical powder (ABC) type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket / floor trolley mounting accessories along with suitable signage, etc. complete all as specified and as directed.
S & F Galvanized mild steel Fire bucket (Filled with dry sand & water) conforming to IS 2546: 1974 round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket complete all as specified and as directed.
S & F for Galvanized mild steel Fire hook bracket with 3 mtr bamboo handle painted with red colour complete all as specified and as directed.
S & F Galvanized mild steel Fire breater bracket with 3 mtr bamboo handle painted with red colour complete all as specified and as directed.
M & L for Fire point construted with angle iron frame mounted on PCC platform with PCC 1:3:6 and covered with GI Sheet painted with red colour and letter "FIRE" in top of shed complete all as specified and as directed.
Supply, installation, testing & commissioning of fk-5-1-12 Seamless Cylinder CCOE Approved, comply with UL 2166 complete with valve assembly and pressure gauge with a safety burst disc and a safety cap of following capacity as mentioned are as under complete all as specified and as directed. Note:- (i) System pressure should be 42 Bar UL Listed only. (ii) The cylinders has to be corossion resistant and burst disc should be rated to + 5 deg 65 deg centigrade complete all as specified and as directed.
(a) 80 Ltrs PESO approved MS Seamless cylinder as per IS 7285 standard. Cylinder neck thread 2 ½” – 12 UN -2B / 3”-12 UN – 2B. Test pressure Minimum 225 Bar. Working pressure 0°C to 54°C, Valve body-Brass, Further components of valve are made using stainless steel, elastomeric gasket materials, brass, plastic as per UL standard 2166. Pressure gauge made of Brass/ Stainless Steel Polycarbonate. Thread 1/8” -27 NPT, Dial dia-41 mm. Pressure range 0 to 70 bar. Temperature rating 0ºC to 55 ºC complete all as specified and as directed.
(b) 140 Ltrs PESO approved MS Seamless cylinder as per IS 7285 standard. Cylinder neck thread 2 ½” – 12 UN -2B / 3”-12 UN – 2B. Test pressure Minimum 225 Bar. Working pressure 0°C to 54°C, Valve body - Brass, Further components of valve are made using stainless steel, elastomeric gasket materials, brass, plastic as per UL standard 2166. Pressure gauge made of Brass/ Stainless Steel Polycarbonate. Thread 1/8” -27 NPT, Dial dia-41 mm. Pressure range 0 to 70 bar. Temperature rating 0ºC to 55 ºC complete all as specified and as directed.
Supply, installation, testing & commissioning of Novec 1230/ FK-5-1-12 Fire Protection fluid compound of carbon, fluorine and oxygen (CF3CF2C (O) CF (CF3) 2) comply with UL standard 2166 filled in cylinders non toxicity of the agent and its minimal impact on the environment (low global warming potential and zero ozone depletion potential) complete all as specified and as directed. Note:- First filling of gas in cylinders included in quoted rate
Supply, installation, testing & commissioning of Electric Control Head,electrically operated from the Detection & Control System Electric Actuator made of brass with nickel plated work on 24 Volts DC, Max current 0.5 Amps, Power consumption 12 Watts, Temp rating (-) 20 ºC to (+) 55 ºC, Thread size M 36 x1.5 complete all as specified and as directed.
Supply, installation & testing of Manual Actuator for manual operation made of Brass or Stainless steel, neck thread M 36 x 1.5, temp rating 0ºC to 54ºC complete all as specified and as directed.
Supply, installation & testing of Discharge hose made of synthetic rubber, Coated steel, working pressure Max. 70 bar inlet pressure, comply with UL 2166, burst pressure 360 Bar, nominal bore DN 33, maximum bending angle 8 ºC, Inlet thread -Screw cap 1 7/8”- 12 UN (Female) 90°-bow, outlet thread - G1 1/2" (Male) Straight, Temperature ratiing 0°C to 54°C. Lenth 350 mm to 500 mm, (use with 34, 80, 120 & 140 Ltrs capacity Cylinders) complete all as specified and as directed.
Supply, installation & testing Warning Sign, Non tearable, water proof, auto glow sticker, of size 300 mm x 200 mm paste out side the room complete all as specified and as directed.
Supply, installation, testing & commissioning of Pressure Operated Control Head which allows for pressure actuation slave cylinders and is mounted directly on top of the slave, Pneumatic Actuator to be made of Brass,Thread size M 36 x 1.5, operating pressure 6 bar, Temperature rating 0ºC to 55 ºC complete all as specified and as directed.
Supply, installation, testing & commissioning of Flexible Actuation Hose made of Synthetic Rubber, end fitting- Stainless Steel, Maximum pressure 300 bar, Connections -Male thread BSP G1/8” flat sealing (included straight), Connecting nut M12 x1.5 DKOL 6 L (24°cone) Straight, Minimum Bending Radius R - 100 mm, Temperature Rating 0°C to 54°C, Length 500 mm to 1000 mm, (Pilot pressure is directed to a pressure operated control head on each cylinder valve using 1/4 inch complete all as specified and as directed. .
Supply, installation, testing & commissioning Bleeder valve installed on the end cylinder to release additional pressure, Bleeder Valve body- Stainless Steel internal components made of stainless Steel & Elastomeric Gasket Material, Functional Principle: Closes and Opens automatically, Status (Open / Closed) closing Pressure : ~0.4 Bar increasing pressure (at volume flow > 40 l/ min) Opening Pressure - 0.5 Bar (+/- 0.2 Bar) Falling Pressure, Inlet Thread-G 1/8” (M), Temperature Range- (-) 20°C to (+) 65°C. Maximum Pressure Pmax- 207 Bar complete all as specified and as directed. .
Supply, installation, testing & commissioning of Manifold Check Valve installed at the discharge manifold to allow removal of any FK- 5-1-12 cylinder from the manifold while still retaining a closed system, Check valve made of Stainless Steel & Elastomeric Material, Nominal Bore- 4 mm (12.57mm²), Maximum Pressure- 360 Bar, Inlet Thread- 1/8” BSP (F), Outlet Thread- 1/8” BSP (F), Temperature Rating 0°C to 54°C complete all as specified and as directed. .
Supply, installation & testing Manifold installed to connect multi cylinder bank made of Carbon Steel Seamless Pipe, Schedule 80 ASTM A106 Grade 'B' pipe to be used, Maximum Working Pressure 70 Bar, Temperature Range 0°C to 54.4°C complete all as specified and as directed.
Supply, installation, testing & commissioning of Discharge Nozzles made of Stainless Steel, Temperature Rating 0°C to 54°C, Orifice size as per OEM flow calculation, designed to provide the proper flow rate and distribution of FK- 5-1-12 to total flood a hazard area (-)180 ºC. / 360 ºC complete all as specified and as directed. Note:- Acoustic calculations should be submitted as per technical specifications for approval.
Supply, installation & testing of Cylinder Strap for cylinder made of Mild Steel, size - 40 mm x 5 mm Thickness, Temperature Rating 0ºC to 54ºC complete all as specified and as directed.
Supply, installation & testing MS Fabricated cylinder stand made of mild steel.angle of size 40 mm x 6 mm Thickness, Temperature Rating 0ºC to 54ºC complete all as specified and as directed.
Supply, installation, testing & commissioning of Manifold Supervisory Switch for indication of discharge of system made of Stainless Steel, Threads- 1/2” BSP (M), Temperature Rating (-)18ᵒC to (+) 54.4ᵒC, Test Pressure 173 Bar, Operating Pressure 5 Bar,Voltage Ratings 15 Amps/ 240 Volts, AC complete all as specified and as directed.
Supply, installation & testing of Cylinder pressure switch or contactable guage in the cylinder to monitor low pressure indication made of Plated Steel, Switch type SPST- NO, Thread Connection- G1/4”, Electrical Connections- D6.35 x 0.8, Temperature Rating (-) 30ᵒC to (+) 65ᵒC, Test Pressure 70 Bar, Voltage Ratings 240 Volts, AC/ 120 Volts DC- I Amp, Operating Pressure/ Action Pressure 41 Bar, Reset Pressure 35 Bar complete all as specified and as directed.
Supply, installation, testing & commissioning Smoke Detector installed to trace (roof) smoke in cross zone, Photoelectric RE 316SH-2L & Heat Detector should be UL approved, Dual LED’s for 360° visibility, Operating Voltage: 9 ~ 33 Volts DC, Reset Voltage- less than 1 Volt, Thermal Rating 59°C (138°F), Rate of Raise of Temp 11.1°C / min (20°F/min), Smoke Sensitivity- (1.9 ± 0.76) % / ft, Operating Temperature (-) 10 °C to (+) 37.8 °C complete all as specified and as directed.
Supply, installation, testing & commissioning of 4 zone Gas Release Panel UL Listed, Initiating Device Circuits- All Zones are Class 'B' Style B/C operation (Programmable, .Primary Power (120 – 220) Volts AC ± 10%, 50 Hz, 2.5 Amps, Normal Operating Voltage (14–21) Volts DC, Alarm Current (15–30m Amps), Short Circuit Current 45m Amps, Maximum.Loop resistance 100 ohms Maximum, End-Of-Line Resistor 3K9, 1/2 watt. Standby Current 7m Amps (2 mAmps for Detectors) complete all as specified and as directed.
Supply, installation & testing Centralized Panel, wall mounted made out of MS powder coated/ABS, of size 350 x 350 x150 mm for monitor pressure of group of protection areas of following specifications complete all as specified and as directed. (i) Indications :- Healthy,Fault, Silenced, Acknowledged. (ii) Output :- Built in Buzzer, 3 nos PF relay contact suitable for 230 Volts AC/ 5 Amps. (iii) Power rating :- 230 Volts AC/ 5 Amps, 30 Volts DC/ 2 Amps (iv) Battery Back up :- Required (v) Push buttons :- 1 for Silencing and 1 for Acknowledgement, 1 for reset.
Supply, installation & testing of 2 core x 1.5 sq. mm, twisted pair Copper FRLSH armoured fire alarm cable with RED insulation, Type 'A' ST1 PVC insulated, A\armoured FRLSH Cable 650 Volts as per IS- 1554, with GI saddle spacers every 0.3 mtr intervels with Single compression Cable Glands, ABS Junction Boxes (wherever required), terminals, Ferruling complete for Centralized monitoring panel complete all as specified and as directed. .
Supply, installation, testing & commissioning as set of Manual release in MS enclosure with lock and key arrangement or break glass type, UL Listed with Painted Die Cast housing, 14 Gauge plated steel black plate, Corrosion inhibited surface, Terminal block ( 4 position), Single gang mounting, 10 Amps, 120 Volts, AC snap action switch (SPST). Electrical Switch- 10 Amps @120 Volts AC, Weight- 15.50 ounce (oz)/ 420 grams, Manual Pull station Dual Action complete all as specified and as directed.
Supply, installation, testing & commissioning as set of Manual Abort Station switch in MS enclosure with lock and key arrangement or break glass type, UL Listed with Painted die cast housing, 14 Gauge plated steel black plate, Corrosion inhibited surface, Terminal block (4 position), Single gang mounting, 10 Amps ,120 Volts, AC snap action switch (SPST), Electrical Switch- 10 Amps @ 120 Volts AC, Weight-15.50 ounce (oz)/ 420 grams, Manual Pull station Dual Action complete all as specified and as directed.
Supply, installation, testing & commissioning of UL Listed sounder cum storb should comply with international standards such as NFPA72 (2016 edition). Flexible optic design to meet the light dispersion, 4 candela settings:15/ 30/ 75/ 110 cd output, 2 audible tone settings- Continuous/ Temporal 3, Slim and Sleek, Light Source & Color - High power cool white LED, Pulse Duration - 20ms, Max Current Draw (mA) - (67-93mA), Flash Rate-1 flash per second, Operating Voltage : 24 Volts DC (16-33 Volts DC) / FWR, Sounder Output -(75 dB to 85 dB), Mounting Options-Standard 4” * 4” back box, Wiring - 2-Wire Type, Screw Terminals - #12 to #18 AWG wires complete all as specified and as directed.
Supply, installation, testing & commissioning LED Display sign board ceiling/ wall mounting type 'EVACUATE GAS RELEASED' (inside) & DO NOT ENTER (outside) , LED Display sign board is Made up of uniformly extruded, aluminum alloy. paint & Colour- Epoxy polyester powder coating, White in colour, Diffuser cum message panel- CAD Designed printing on 10 mm clear acrylic sheet Input- 24 Volts DC, LED- Multiple LEDs) complete all as specified and as directed.
M & L for preparing UL approved Flow calculations with piping isometric, Gas quantity, layout drawings, with Cylinder CCOE certificate for Storage cylinders,OEM fill certificate,Certificate for filling in India and all related documentation complete all as specified and as directed. Note:- Detailed engineering to be done by OEM and provide flow claculation report of required gas for protection area before execution of work.
Supply, installation, testing & commissioning of pipes as per flow calculations for the specific hazard volume and stand to hold, position & support the Manifold and Piping properly with fabrication work of pipes. Sch 40, ASTM A106 Grade 'B', total pressure 100 Bar, fittings Socket welded, thickness minimum 2.8 mm and goes high as per sizes and ASTM standarad of followng sizes complete all as specified and as directed. Note:- Cost of the piping shall be considered as per the Cylinder Tanks Configurations complete all as specified and as directed.
All as per item no. 248.00 for 15 mm dia Nominal Bore
All as per item no. 248.00 for 20 mm dia Nominal Bore
All as per item no. 248.00 for 25 mm dia Nominal Bore
All as per item no. 248.00 for 32 mm dia Nominal Bore
All as per item no. 248.00 for 40 mm dia Nominal Bore
All as per item no. 248.00 for 50 mm dia Nominal Bore
All as per item no. 248.00 for 65 mm dia Nominal Bore
All as per item no. 248.00 for 100 mm dia Nominal Bore
Supply, installation, testing & commissioning maintenance free Battery 12 Volts, 7 Amp sealed to provide backup for control panel complete all as specified and as directed.
Supply, installation, testing & commissioning (Installation of suppression system and looping with fire alarm system / control panel) complete all as specified and as directed.
Supply, installation, testing & commissioning of CO2 gas cylinder of capacity 68 Ltrs suitable to fill 45 Kg CO2 Gas. Manufacturing standard- IS 7285, UL 1254, UL 2166, material 37 mng Manganese Steel, cylinder diameter- 267 mm, Cylinder Neck Thread- 3/4” NGT/ 25E, Filling Density- 0.667 Kg/ Ltrs, Maximum, Temperature Ratings (-20) ᵒC to (+) 55ᵒ C, Min Test Pressure 250 Bar, All the components attached should be UL Listed complete all as specified and as directed. Note:- First filling including Co2 gas required for filling included in item rate quoted.
Supply, installation & testing of Master Valve to operate master cylinder assembly, made of brass as per standard -UL 2127, NFPA 12, Threads-Inlet- 3/4” NGT, Outlet, 7/8” UNF, Temperature Ratings (-)18ᵒC to (+) 54.4ᵒC, Electric Operation-24 Volts DC, Test Pressure- 207 Bar complete all as specified and as directed.
Supply, installation & testing of Slave Valve to operate pilot cylinders used in multi cylinder bank made of Brass, Stainless Steel, Elastomeric material as per standard UL 2127, NFPA 12. Threads-Inlet- 3/4” NGT, Outlet: 7/8” UNF, Temperature Ratings (-) 18ᵒC to (+) 54.4ᵒC, Test Pressure- 207 Bar complete all as specified and as directed.
Supply, installation & testing of Discharge hose for gas discharge through manifold piping, made of Flexible Wire braided Rubber end Fittings of Stainless Steel as per standard UL 2127, NFPA 12. Threads- 7/8” UNF (F) x 7/8” UNF (F), Temperature Ratings (-) 18ᵒC to (+) 54.4ᵒC, Test Pressure- 180 Bar complete all as specified and as directed.
Supply, installation & testing of Check valve to install between manifold and discharge hose, made of Stainless Steel, Elastomeric Material, Threads- 7/8”UNF (M) x 3/4” BSP (M), Temperature Ratings (-) 18ᵒC to (+) 54.4ᵒC, Test Pressure- 180 Bar complete all as specified and as directed.
Supply, installation & testing of Interconnecting hose to connect pilot cylinders with master cylinder, made of Flexible Wire Braided Rubber end fittings- Stainless Steel, Threads- 3/8” BSP (M) x 3/8” BSP (M), Temperature Ratings (-) 18 ᵒC to (+) 54.4ᵒC, Test Pressure- 180 Bar complete all as specified and as directed.
Supply, installation & testing of Cylinder Battery Frame with manifold and rack support, made of Mild Steel Manifold Carbon Steel Seamless Pipe to fix cylinders and manifold in the single fabricated frame complete all as specified and as directed.
Supply, installation & testing of Safety relief valve to manage additional pressure, made of Stainless Steel, Nickel burst disc. Threads- 1/2” BSP (M), Temperature Ratings (-) 18 ᵒC to (+) 54.4ᵒC, Test Pressure (Blanked Condition)- 180 Bar, Operating Pressure 170 ± 5 Bar complete all as specified and as directed.
Supply, installation & testing of Bleeder Valve to manage additonal pressure made of Stainless Steel, Threads, 3/8” BSP (M), Temperature Ratings (-) 18ᵒC to (+) 54.4ᵒC, Test Pressure- 180 Bar, Leakage Pressure 1.4 Bar complete all as specified and as directed.
Supply, installation & testing of Pressure Switch to monitor gas discharge, made of Stainless Steel as per standard UL 2127, NFPA 12. Threads- 1/2” BSP (M), Temperature Rating (-) 18ᵒC to (+) 54.4ᵒC, Test Pressure 180 Bar, Operating Pressure ≥ 5 Bar, Electrical Ratings 15Amps/ 250 Volts, AC Max complete all as specified and as directed.
Supply, installation & testing of Discharge Nozzle to distribute agent in protection area, made of Stainless Steel as per standard UL 2127, NFPA 12,Threads- 1/2” BSP (M), Temperature Ratings (-) 18ᵒC to (+) 54.4ᵒC complete all as specified and as directed. Note:- Orifice sizes to be considered as per software calculation by OEM
Supply, installation & testing of 4 zone Gas Release Panel UL Listed, Initiating Device Circuits -All Zones are Class 'B' Style B/C operation (Programmable), Primary Power (120 – 220) Volts AC ± 10%, 50 Hz, 2.5 Amps, Normal Operating Voltage (14 – 21) Volts DC, Alarm Current 15 - 30 m Amps, Short Circuit Current 45 m Amps Maximum, Loop resistance-100 ohms Maximum, End-Of-Line Resistor 3K9, 1/2watt, Standby Current -7m Amps (2m Amps for Detectors complete all as specified and as directed.
Supply, installation & testing of Clean agent based 2 Kg direct low pressure Firessense Automatic Fire detection and fire fighting system consisting of following complete all as specified and as directed. :- (a) Clean agent cylinder made of mild steel, Cylinder diameter 110 mm (Approx.) (b) Cylinder Neck Thread- M30 x 1.5, Height- 300 mm (Approx.) (c) Temperature Rating (-) 20°C to 60°C (d) Test Pressure- 35 bar (e) Cylinder valve made of Brass (Nickel Plated), Threads- M30 x 1.5, Temperature Ratings (-) 20ᵒC to (+) 60ᵒ C, Test Pressure- 28Bar. (f) Valve Seat- DN 6 mm, Valve Thread- 1/8” (M) x 1/8” (F). (g) Pressure gauge test pressure 28 Bar, range 0 to 28 bar, Pressure gauge Connection M10 x 1, Dial Zones-Green Zone and Red Zone
(h) Tube connector material brass, Connections- Pushfit suitable for tubing of Outer dia- 6 mm, Inner dia- 4 mm, Temperature Ratings (-) 20ᵒC to (+) 60ᵒ C, Test Pressure- 28bar. (j) End of line Connector made of Brass (Nickel Plated), Threads/ Connection- M10 x 1/ Detecting tubes 4 x 6, Test Pressure- max 28 Bar, Temperature Rating (-) 20°C to (+) 60°C. (k) Pressure Switch made of Plated Steel, Switch Type- SPST-NO, Thread Connection- G1/4”, Electrical Connections-D6.35 x 0.8, Temperature Rating (-) 30ᵒC to 9+) 65ᵒC, Test Pressure- 70 Bar. (l) Voltage Ratings- 240 Volts AC/ 120 Volts DC- I Amp. (m) End of line Plug made of Brass (Plated), Connection-Pushfit suitable for tubing of Ø 4 x 6, Test Pressure Max. 28 Bar, Temperature Rating (-) 20°C to (+) 60°C. (n) Tee Connector made of Brass (Plated), Connections- Pushfit suitable for tubing of Ø 4 x 6, Test Pressure- Max. 28 Bar, Temperature Rating (-) 20°C to (+) +60°C. (o) Monitoring panel made of ABS Enclosure, Power Supply- 230 Volts, 50 Hz, AC, Indication- GREEN LED: System Healthy RED LED, System Discharged Buzzer- Sound on when system is discharged, Temperature Rating- (-) 20°C to (+) +60°C
Supply, installation & testing of Heat detection tube made of modified polyamide (PA), Inner diameter- 4mm, Outer diameter- 6mm, Operating Temperature- 137.8 ºC to 148.9 ºC, Installation Temperature- < 120ºC, Bend Radius- Min 100 mm, Tube should be UL Listed with all necessary fittings & supports complete all as specified and as directed.
Supply, installation & testing of DC convertor for Panel protection power supply to convert AC power into DC complete all as specified and as directed.
M&L for point wiring with 2.5 Sqmm, PVC insulated, unsheathed, multistranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including heavy duty PVC rigid conduit,ISI marked complete with all ISI Marked accessories such as socket, elbow, junction box, etc including provision of ISI marked and PVC modular box, covered with modular white cover plate with frame suitable modular swiches including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as complete specified
S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
S & F for Modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
Notes for item Nos. 220 to 268 :- Work against Item no. 217 to 273 will be executed in buildings named as under:- 1. LOGISTIC SECTION (IMMOLS SERVER ROOM, STORE FOR RUBBERIES FUEL TANKS) as per Annexure-VII (Index No- 33) of scope of work 2. SES SECTION (PILOT EQPT BAY)
TELEPHONE CONDUIT
S & F for PVC non-metallic rigid conduit ISI marked heavy duty of white/ Ivory colour and its accessories i.e juction/ terminal boxes, tees, bend elbows, reducers, bell mouth tube ends etc heavy duty ISI marked for LAN, telephone and TV connections including necessary cutting, chasses and making good disturbed surface to match with existing finish with plaster of 50mm dia complete all as specified and directed.
S & F for GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly suitable for modular switches including necessary cutting and making good disturbed surface to match with existing finish with plasterof following sizes complete all as specified and directed.
All as per item no. 270 for 8 Module
All as per item no. 270 for 12 Module
All as per item no. 270 for 16 Module
S & F for modular white cover plate with frame suitable for modular switches following sizes complete all as specified and directed.
All as per item no. 271 for 12 Module
All as per item no. 271 for 16 Module
S & F for modular Double RJ11 telephone socket of 1 module
S & F for modular RJ45 Cat 6 computer socket of 1 module
S & F for modular Blanking plate of 1 module
SOLAR POWER PLANT AND ROOFTOP SOLAR POWER PLANT
Design, Procure, supplying, erecting, install, testing and commissioning including topographical survey and connecting to local utility grid; Grid connected Solar Photo-Voitaic (PV) plant of 500 KW (AC)/ 600 KW (DC) capacity including solar photovoltic Module, DC cabling, Module Mounting Structures, Combining Boxes, Lightning Protection of SPV modules and other accessories, string inverter, MNRE Approved complete all as specified and directed. (DCR type) For detailed description of item refer Annexure'A' to BOQ para no. 12.00.
Supply, installation, Testing and commissioning of indoor type (IP 3X), 03 way RMU (Ring Main Unit) 11 KV, 630 Amps, 25kA-3 Sec, IP 3X SF6 insulated, One side Extensible, consisting of One No (01) motorised vacuum circuit breaker (Incomer) and Two Nos (02) motorised vacuum circuit breaker (Outgoing) & Metering Panel Bus PT with Top LV, Battery & Battery charger, Ethernet switch & LIU (Configuration VVV+M), inside robotically welded stainless steel 304 (Non Ferrite non Magnetic Grade) tank having min thickness 2.5 +/- 0.5mm with IP 67 degree of protection and enhanced BIL of 75 kVp internally to manager voltage surges and Air Insulated Metering Module of Class-0.5 complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 13.00.
DATA ACQUISITION SYSTEM/PLANT MONITORING & SCADA: Monitor system to be provided to monitor the performance of the inverter (power, array voltages, array currents & AC parameters), energy yield, temperature, irradiance level etc. and It could provides flexible interface to facilitate PC based inverter monitoring and control via LAN modem and internet/ ethernet connection. This should include web visualization system and data logger with integrated ethernet port complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 14.00.
Supply and install for Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and as directed.
Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.0 mm thick SS sheet over MS 40 X 40 x 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 15.00.
Supply, fixing, installing and commissioning of Octagonal Galvanised Iron street light pole 8 mtr long, top dia 70 mm, bottom dia 135 mm, made out of GI sheet thickness 3 mm and base plate dimensions 300 x 300 x16 mm thickness, the pole shall be galvanized as per IS 4759/ BSEN1461 standards/ housing with in built door locking arrangement for provision of terminal plate consisting terminal block suitable size of "connectwell" copper stud teriminal (provision for socket bolting)- 04 Nos for 3 Phase and neutral for incoming & out going cable connectios etc with MCB SP 5 Amps- 01 No inside and junction box complete with necessary electrical connections including 04 Nos foundation 'J' bolts of size as per manufacutrer design should be hot dipped galvanised and including ornament type decorative GI single arm manufaturer bracket fixed to pole and necessary concrete foundation 1:2:4 concrete including necessary excavation, earth work, refilling etc complete all as specfied and directed.
S & F for LED Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 protection security light fitting luminaire of capacity 60 watts with high power LEDs as light source and electronic driver, 4kV inbuilt and 10 kV external surge protecton with Top opening driver cover for easy maintenance with warranty option of 5 years from date of installation with pre wired and necessary mounting arrangements and provision of 4 sq mm three core copper conductor cable multi stranded from fitting terminal to street junction box complete all as directed by Engineer- in-charge.
Supply and fixing module cleaning arrangement such as centrifugal pump 2 HP single phase 230 volts-1 Nos, including hard standing for pump, cable and starter for pump foot valve complete as as specified and directed by Engr-in-Charge.
M&L for 3 layer rotational moulded polyethylene water storage tanks 10000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed
Design, procure, supplying, erecting, install, testing and commissioning including topographical survry and connecting to local utility grid; Grid connected Solar Photo-Voitaic (PV) plant of following AC/DC capacity (Roof top) including solar photovoitaic Module, DC cabling, Module Mounting Structures, Combining Boxes, Lightning Protection of SPV modules and other accessories, string inverter, MNRE Approved complete all as specified and directed. (DCR type) For detailed description of item refer Annexure'A' to BOQ para no. 16.00.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 04.0 KWp (AC)/04.80 KWp (DC) on Bldgs on Pocket 09 and cumulative capacity of inverter 04.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 25.0 KWp (AC)/ 30.0 KWp (DC) on Bldgs on Pocket 10 and cumulative capacity of inverter 25.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 45.0 KWp (AC)/ 54.0 KWp (DC) on Bldgs on Pocket 11 and cumulative capacity of inverter 45.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 16.0 KWp (AC)/ 19.20 KWp (DC) on Bldgs on Pocket 13 and cumulative capacity of inverter 16.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 20.0 KWp (AC)/ 24.0 KWp (DC) on Bldgs on Pocket 14 and cumulative capacity of inverter 20.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 10.0 KWp (AC)/12.0 KWp (DC) on Bldgs on between Pocket 08 to 09 and cumulative capacity of inverter 10.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 40.0 KWp AC/ 48.0 KWp (DC) on Bldgs on Pocket SMC and cumulative capacity of inverter 40.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 2x 50.0 KWp (AC)/ 2x 60.0 KWp (DC) on Bldgs on Pocket Adm Bldg and cumulative capacity of inverter 02 x 50.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 10.0 KWp (AC)/12.0 KWp (DC) on Bldgs on Pocket MRS and cumulative capacity of inverter 10.0 KW AC without battery Grid.
All as per item no. 284 for Grid connected Rooftop Solar Photovoltaic (PV) plant of capacity 50.0 KWp (AC)/ 60.0 KWp (DC) on Bldgs on Pocket Legestic Section and cumulative capacity of inverter 50.0 KW AC without battery Grid.
Manning & Operation Outsourcing of services for operation including all recording & documentation of following Solar power plant and Roof top Solar power of different capacity, from site records & parameters etc. including cleaning of modules daily by spraying water with help of expandable hose pipe & wipers complete by deploying 01 Electrician and 02 Helper in two shift of 8 Hrs (Shift of 08 Hrs such as 06:00hrs - 14:00hrs, 14:00 -22:00) and 02 Helper in one shift of 8 Hrs (22:00 to 06:00 Hrs) comprising of the following complete all as specified and directed. Details of SPV Plant:- (a) Solar power plant 500 KW including Solar Panel, Invertor & Transformer
Details of Roof Top Solar:- (a) Pocket 09 -(04 KWp Grid) including Solar Panel & Invertor (b) Pocket 10 -(25 KWp Grid) including Solar Panel & Invertor (c) Pocket 11 -(45 KWp Grid) including Solar Panel & Invertor (d) Pocket 13 -(16KWp Grid) including Solar Panel & Invertor (e) Pocket 14 -(20KWp Grid) including Solar Panel & Invertor (f) Pocket between 8 to 09 -(10 KWp Grid) including Solar Panel & Invertor (g) Pocket SMC -(40 KWp Grid) including Solar Panel & Invertor (h) Pocket Admin bldg - (2 x 50 KWp Grid) including Solar Panel & Invertor (j) Pocket MRS -(10 KWp Grid) including Solar Panel & Invertor (k) Pocket Logistic section-(50 KWp Grid) including Solar Panel & Invertor (a) SHIFT DUTY (TIMMINGS):- (i) Morning Shift : 0600 Hours to 1400 Hours, (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.
All as per item no. 285.00 but for First year (Under Defect Liability Period).
All as per item no. 285.00 but for Second year (Under Defect Liability Period).
All as per item no. 285.00 but for Third year (First year after completion of Defect Liability Period).
All as per item no. 285.00 but for Fourth year (Second year after completion of Defect Liability Period).
All as per item no. 285.00 but for Fifth year (Third year after completion of Defect Liability Period).
All as per item no. 285.00 but for Sixth year (Fourth year after completion of Defect Liability Period).
All as per item no. 285.00 but for Seventh year (Fifth year after completion of Defect Liability Period).
SMART KWH METER
Supply and Installation of Smart Three Phase Meter of different makes (Not more than 33 % of a particular make) including polycarbonate boxes with transparent cover to view meter display complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 17.00.
Supplying, Fixing, Commissioning and testing of configuration of cloud based prepaid software complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 18.00.
Provision of Comprehensive operation and route maintenance of AMI System including project implementation & repairs/ replacement of defective meteres/ DCU other associated components (software/ hardware required to make the system alongwith all smart meters functional at all time and management all expenditure including periodic charges of telecom operator & charges of audit of smart meteres and AMI system by CERT-IN empaneled firm/ CERT Auditor of Armed forces as per Govt policies smart meter biling and maintenance for 8 year excluding defect liability period of 2 years. Note : Cost would includes the following items in scope of work (a) Software AMC: This would include necessary up-gradations in the software such as support to the chrome browser charges, android version charges, iOS version charges. These charges happen on frequent basis and the software would support all the charges. (b) Recurring sim charges for DCU and Meter as required (c) Ensuring adequate database backup, up-gradations in the operating system, anti-virus updates, data base upgrade etc. (d) Reports development: The additional reports as needed for the success of the project would be developed. (e) Software hosting on GCC. Software+B28 installation on any alternate/ backup server, if required. (f) The communication network monitoring and support. (g) Configuration of the repaired/ replaced hardware (meter/dcu/repeater) in the system. (h) Trouble shooting and necessary actions to run the system as required. (j) Software bug fixing as and when required.
All as per item no. 288.00 but for First year after completion of Defect Liability Period.
All as per item no. 288.00 but for Second year after completion of Defect Liability Period.
All as per item no. 288.00 but for Third year after completion of Defect Liability Period.
All as per item no. 288.00 but for Fourth year after completion of Defect Liability Period.
All as per item no. 288.00 but for Fifth year after completion of Defect Liability Period.
All as per item no. 288.00 but for Sixth year after completion of Defect Liability Period.
All as per item no. 288.00 but for Seventh year after completion of Defect Liability Period.
All as per item no. 288.00 but for Eighth year after completion of Defect Liability Period.
EV CHARGER
Supply, install, Testing and Commissioning under company representative AC charger type 2, 7.4 kw for Vehicle charging complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 19.00.
Supply, install, Testing and Commissioning under supervision of company representative DC fast charger CCS2, Wall mounted,Graphical display output 30kw 1000v DC single gun with 5m cable as per the enclosed TDS complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 20.00.
EXTERNAL WATER SUPPLY
Material and labour for construction of brick masonry valve pit of internal size 90cm x 90cm x 90cm suitable for gate valves/ sluice valve upto 150 mm including necessary excavation and earth work, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:6) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit shall be provided (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation
Material and labour for construction of brick masonry valve pit of internal size 45cm x 45cm x 60cm suitable for gate valves/ sluice valve upto 150 mm including necessary excavation and earth work, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:6) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit shall be provided (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation
Supply, laying, jointing and testing of ductile iron (DI) pressure pipes, 80 mm dia (3") with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329: 2000 (latest revision) and other relevant standards, with metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) including rubber gasket in any length with inside cement mortar lining laid in trenches/ over masonry pillar complete all as specified and directed. Notes:-(i) Excavation and earthwork shall be measured and paid separately under relevant items in schedule. (ii) The quoted rate shall also be deemed to include for provision of joints and jointing material for laying pipes. For jointing of pipe fittings or taking branch connection, provision of joints and jointing material shall be measured and paid separately. (iii) Before laying of pipe line, contractor has to submit layout diagram as per level difference and ensure proper alignment of the pipe.
Material and labour for ductile iron fittings for spigot socket pipe such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, "Y" junction, double branch, cross (all socket or socket and spigot), collars, restrained joint, mechanical joint, caps and plugs; 80 mm to 250 mm dia bore including cutting and jointing old/ new positions complete all as specified and directed.
EXTERNAL ELECTRIFICATION
S & F for Cable route indicator / Marker made up of PCC Block in cement mortar 1:3:6 (20 mm graded aggregrate) of size 900 x 300x 100 mm thick with "DANGER/ LT 433 VOLTS CABLE /MES or DANGER/ MES" embossing on cable route Indicator / Marker including painting as per approved colour and buried in ground 45 Cms including necessary earth work (as required/ ordered at site) complete all as specified and as directed. (Qty for Solar power plant-50, Roof top solar-21, EES-280 )
Supply and fix cable jointing kit for 1100 Volts grade LT UG cable for straight through joint complete with jointing material cold shrink type and accessories suitable for XLPE, armoured, aluminium conductor cable of size 3.5 core x 50 to 95 sqmm for indoor/ outdoor type complete all as specified and directed.
Supply and fix cable jointing kit for 1100 Volts grade LT UG cable for straight through joint complete with jointing material cold shrink type and accessories suitable for XLPE, armoured, aluminium conductor cable of size 3.5 core x 120 to 185 sqmm for indoor/ outdoor type complete all as specified and directed.
Supply and fix hot dipped galvanized wire mesh cable tray of size 750 mm width x 54 mm height complying standard EN ISO 1461, manufactured with a longitudinal 'T- welded' safety edge, constructed with 50 x 100 mm mesh configuration including couplers, covers with clips and wall mounting accessories as per site requirement complete all as specified and directed. Supports, brackets or hangers, covers designed loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537.
Supply and fix hot dipped galvanized wire mesh cable tray of size 600 mm width x 54 mm height complying standard EN ISO 1461, manufactured with a longitudinal 'T- welded' safety edge, constructed with 50 x 100 mm mesh configuration including couplers, covers with clips and wall mounting accessories as per site requirement complete all as specified and directed. Supports, brackets or hangers, covers designed loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537.
Supply and fix hot dipped galvanized wire mesh cable tray of size 450 mm width x 54 mm height complying standard EN ISO 1461, manufactured with a longitudinal 'T- welded' safety edge, constructed with 50 x 100 mm mesh configuration including couplers, covers with clips and wall mounting accessories as per site requirement complete all as specified and directed. Supports, brackets or hangers, covers designed loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537.
Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultrasound technique and necessary machine including provision of HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure for cable protection and making good as existing complete all as specified and as directed.
Supply and fix horizontal double mounting siren, three phase, 3 HP, 2800 RPM, 5 km range complete with starter, necessary foundation, protection shed complete all as specified and directed.
Supply and fix differential sound siren system 8 to 10 sound with composite panel complete all as specified and directed.
Supply and fix for LED aviation obstruction light fitting on top of Aerial Tower with red colour 20 watts, 230 Volts, 50 Hz, AC, IP 65 protection, vermin, dust & weather proof LM6 body self contained wire with necessary electrical connections complete all as specified and directed.
Supply, laying and testing of Double Wall Corrugated (DWC) high density Polyethylene (HDPE) pipes ISI marked with IS : 16098 (Part-II) having corrugation on the outer wall and plain surface on the inner wall laid as per IS 14930 (Part I & II) for protection of underground cables of following size nominal outer dia & nominal inner dia with all fittings laid in trenches / road/ nallah or fixed along wall for cable protection complete all as specified and as directed.
All as per item no. 305.00 for nominal outer dia 160 mm & nominal inner dia 136 mm dia. (Qty for DG set-144 RM, Solar power plant-1881 RM, EES-1051 RM)
All as per item no. 305.00 for nominal outer dia 120 mm & nominal inner dia 103.5 mm dia. (Qty for DG set-288 RM, Roof top solar-200 RM, EES-2122 RM)
All as per item no. 305.00 for nominal outer dia 90 mm & nominal inner dia 76 mm dia. (Qty for Roof top solar-440 RM, EES-3652 RM)
All as per item no. 305.00 for nominal outer dia 63 mm & nominal inner dia 50 mm dia. (Qty for Solar power plant-300 RM, Roof top solar-160 RM, EES-2664 RM, STP-468)
S & f for Automatic Boom Barrier with MS Housing Model SBB -5K upto 5 mtr with heavy duty gear motor having to operate with MCBF control Panel with push button,Safe Beam Sensor remote with receiver with necessary fixing arrangements as per OEM instuctions complete all as specified and as directed. (Main Gate)
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 1 Offr Md Accn ) For detailed description of item refer Annexure'A' to BOQ para no. 21.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 2 Offr Md Accn for Maj to Brigadier ) For detailed description of item refer Annexure'A' to BOQ para no. 22.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 3 for Offr Md Accn for Capt and Equivalent ) For detailed description of item refer Annexure'A' to BOQ para no. 23.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 4 for Offr Mess & Single living Accn ) For detailed description of item refer Annexure'A' to BOQ para no. 24.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 5 for Servent Qtr ) For detailed description of item refer Annexure'A' to BOQ para no. 25.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 6 at DSC Mess) For detailed description of item refer Annexure'A' to BOQ para no. 26.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 7 at SNCO's Mess & Club) For detailed description of item refer Annexure'A' to BOQ para no. 27.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 8 for Airmen Mess ) For detailed description of item refer Annexure'A' to BOQ para no. 28.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 9 for DSC Accn)) For detailed description of item refer Annexure'A' to BOQ para no. 29.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 10 for Single JCO or Equivalent living Accn & Single Accn) For detailed description of item refer Annexure'A' to BOQ para no. 30.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 11 for Airmen Accn ) For detailed description of item refer Annexure'A' to BOQ para no. 31.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 12 for CEO complex Bldg) For detailed description of item refer Annexure'A' to BOQ para no. 32.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 13 for Guard Room & IAF (P) Bldg) For detailed description of item refer Annexure'A' to BOQ para no. 33.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 14 for Stn HQ ) For detailed description of item refer Annexure'A' to BOQ para no. 34.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 15 for SMC Bldg ) For detailed description of item refer Annexure'A' to BOQ para no. 35.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 16 for ATC) For detailed description of item refer Annexure'A' to BOQ para no. 36.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel No 17 for ATC Storages ) For detailed description of item refer Annexure'A' to BOQ para no. 37.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 18 for Scientific Lab complex ) For detailed description of item refer Annexure'A' to BOQ para no. 38.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 19 for Battery Charging Room ) For detailed description of item refer Annexure'A' to BOQ para no. 39.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 20 for Duty Crew Room, Air Crew Lounge, Garrage for GHE/ASV /Air Crew Lounge ) For detailed description of item refer Annexure'A' to BOQ para no. 40.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 21 for Statio Armoury ) For detailed description of item refer Annexure'A' to BOQ para no. 41.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 22 for Hanger Bldg ) For detailed description of item refer Annexure'A' to BOQ para no. 42.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 23 for Annexe 16A, Ground Eqpt Bay, ASV Garrage for SQN & Parking Shed ) For detailed description of item refer Annexure'A' to BOQ para no. 43.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 24 for Annexe 16B DSS Hut ) For detailed description of item refer Annexure'A' to BOQ para no. 44.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 25 for Role Eqpt Bay, Armament Store & POL Store ) For detailed description of item refer Annexure'A' to BOQ para no. 45.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 26 at Logestic Sec ) For detailed description of item refer Annexure'A' to BOQ para no. 46.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 27 at MT Sec ) For detailed description of item refer Annexure'A' to BOQ para no. 47.00.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. (LT Panel N0 27 for Safety / Survival Equipment Bays (SES SECTION) & SE(L) Sec ) For detailed description of item refer Annexure'A' to BOQ para no. 48.00.
SEWAGE TREATMENT PLANT
Supplying, Design, Constructing, hydraulic testing, commissioning and giving satisfactory trials of 60 KLD STP consisting of compact package type STP along with the accessories to the desired capacity of 60 KLD rated net output, complete as turnkey job with all involved electrical and mechanical components with all duties and taxes, complete all as specified and directed for satisfactory performance of plant and required treated water parameters as per E-in-C policy No. 05/2023 issued vide letter No. A/95533/SCADA SEWAGE/POL/E2W(PPC) dt 04 May 2023 & NGT guidelines. For detailed description of item refer Annexure'A' to BOQ para no. 49.00.
Manning & operation and comprehensive maintenance Outsourcing services for running of Package type Sewage Treatment Plant (STP) of capacity 60 KLD with One No FGM (Semi skilled) in Three shifts per day 8 Hours per shift (Morning, Evening & Night), including Sundays & holidays, situated at Air Force Station Deesa for its smooth functioning including cleaning of installation plant including cutting of grass from plant yard and surrounding area and maintain record of running of plant on described printed log sheet approved by the Engineer- in- charge, logsheet shall be provided by the contractor, routine maintenance of liquid chlorine dosing system, pump gland leakage and other minor repair / rectification of all machine and equipments as and when required to ensure serviceability of plant comprising of the following complete all as specified and directed.
(i) Submersible nonclog sewage pump set with motor (ii) Treated sewage mono block pump set with motor (iii) Air blower (iv) Supply and delivery butter fly valves (v) Receiving tank (vi) FAB reactor (vii) Tube settler tank (viii) Chlorine contact tank (ix) Treated water tank (x) Sludge drying bed (xi) Oil & grease tank (xii) Bar screen (xiii) Liquid chlorine dosing system (xiv) Electric control panel with MCCB & starters (xv) Stand by DG Set (a) SHIFT DUTY (TIMMINGS):- (i) Morning Shift : 0600 Hours to 1400 Hours, (ii) Evening Shift : 1400 Hours to 2200 Hours (iii) Night Shift : 2200 Hours to 0600 Hours.
All as per item no. 336.00 but for First year (Under Defect Liability Period).
All as per item no. 336.00 but for Second year (Under Defect Liability Period).
All as per item no. 336.00 but for Third year (First year after completion of Defect Liability Period).
All as per item no. 336.00 but for Fourth year (Second year after completion of Defect Liability Period).
All as per item no. 336.00 but for Fifth year (Third year after completion of Defect Liability Period).
All as per item no. 336.00 but for Sixth year (Fourth year after completion of Defect Liability Period).
All as per item no. 336.00 but for Seventh year (Fifth year after completion of Defect Liability Period).
M & L for Non clog vertical submersible pumps (Flow and Head 200 LPM x 25 Mtr Head), of capacity 3.0 HP with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including including 40 mtr submersible cable Supply Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance complete all as specified
Supply, Installtion, Testing and Commissioning (SITC) of Float type Level switch (vertical) for pumping station complete all as specified and directed.
Supply ,fabrication, installation and testing of LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, Outdoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 3.15 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate) . All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 50.00.
RECYCLING TREATMENT OF SEWER WATER
Supply , installation, testing and commissioning electric motor driven submersible pump set suitable for lifting water from UG sump of capacity 8.0 HP for 250 LPM water flow and 40 Mtr head with AC, 3 phase 50 Hz 415 volts submersible motor of suitable capacity including non return valve 01 No & suiable size of 3 core submerssible cable from Motor panel to pump treminal all as per IS : 8034 198 complete all as specified and directed (1W + 1S) (at Treated water UG Sump)
Supply and fix PPR Gate Valves (Brass Insert) of 110mm outer dia complete all as specified and as directed.
Supply laying and testing commissioning Sprinkler 20 mm dia inlet, pressure up to 45 psi/ 3 Bar and water throw radius up to 12 Mtr complete all as specified and as directed.
Supply ,fabrication, installation and testing of Motor Control LT Panel factory made, Type Test Assemble (TTA) Panel for working on 3 phase, 4 wire, 415 Volts, AC, 50Hz, cubical, indoor type, weather proof, water proof, dust proof, vermin proof, shock proof protection made out 2.0 mm thick CRCA sheet of suiitable size accommodate accessories/ fittings with front and back double door opening/ lockable by the key from both side with IP 65 Protection and provn of suitable bus bar chamber and switch gear compartments for MCCB incoming & out going feeders etc with copper extension links of suitable curent carrying capacitty not less than 1.5 times the rated current carrying capacity of MCCB individual feeder supported on DMC/ Epoxy insulator including provison for termination with incoming and out going cables with cable glands. Motor Control LT Panel shall be mounted on 50 x 50 x 6 mm size MS angle iron frame duly painted with two coats of black bituminus paint over a coat of red oxide primer including PCC foundation of suitable size with PCC 1:2:4 type B1(using 20 mm graded stone aggregate). All extension link/ inter connection shall be insulated with heat shrinkable colour coaded sleeves to accomodate complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 51.00.
Material and labour for construction of brick masonry valve pit of internal size 45cm x 45cm x 70cm suitable for gate valves/ sluice valve upto 150 mm including necessary excavation and earth work, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:6) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit shall be provided (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation
Material and labour for construction of brick masonry valve pit of internal size 75cm x 75cm x 90cm suitable for gate valves/ sluice valve upto 150 mm including necessary excavation and earth work, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock complete all as specified and directed. Note:- (i) Brick wall shall be 23 cm thick built in cement mortar (1:6) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450 mm from top shall be 20 mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls (iv) PCC coping shall be 15 cm thick in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC (v) Three coats of white wash to internal surfaces of valve pit shall be provided (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation
FENCING/ BOUNDARY/ GATE
Material & Labour for hot dipped galvanised, anti rust , punched tape concertina coil of 610 mm dia (dia of coil when unstreched) and 2.5 mm dia of core wire, it shall not be less than 50 Nos. of spiral in each 6 RM length of coil, fencing stretches, including U & C clips, having stranding specifications average weight not less than 9.5 kg/ per coil (6mtrs coil length) including supporting wire of the same material as concertina coil, incl coating of px2 compound and fixed on angle iron brackets of compound wall/ fencing and including all scaffolding, if required complete all as specified and directed. Note: The laid length coil shall be considered for the measurement and payment purpose and not the circumference lenth of Concertina coil
RAIN WATER HARVESTING
Design & Execution of Efficient Artificial Recharge Structure for Rain water complete all as specified and directed. For detailed description of item refer Annexure'A' to BOQ para no. 52.00.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_864268.xls
BOQ • 10.59 MB
16AbstractsheetHangerAppx'G'915to920.pdf
Tender Documents • 0.28 MB
11PaymentSch752to755.pdf
Tender Documents • 0.30 MB
12LD756to782.pdf
Tender Documents • 0.53 MB
13Appendix783to810.pdf
Tender Documents • 0.49 MB
14Soilinvestigationreprt811to910.pdf
Tender Documents • 46.57 MB
15BoreholedetailAppx'F'911to914.pdf
Tender Documents • 0.29 MB
10PS494to751.pdf
Tender Documents • 2.10 MB
1GenPage01to24.pdf
Tender Documents • 0.56 MB
2Fwdng25to32.pdf
Tender Documents • 0.30 MB
3ScopeofworkPT-I33to45.pdf
Tender Documents • 0.38 MB
3ScopeofworkPT-II46to77.pdf
Tender Documents • 21.79 MB
4ScheduleANotes84to200.pdf
Tender Documents • 1.60 MB
5SCH201to276.pdf
Tender Documents • 0.57 MB
6Annexure'A'toBoQ277to387.pdf
Tender Documents • 1.05 MB
7ScheduleBCD388to393.pdf
Tender Documents • 0.35 MB
8GenCon394to450.pdf
Tender Documents • 0.38 MB
9SplCond451to493.pdf
Tender Documents • 0.56 MB
10dt17apr.pdf
Additional Documents • 4.01 MB
02dt17apr.pdf
Additional Documents • 2.96 MB
03dt17apr.pdf
Additional Documents • 2.89 MB
04dt17apr.pdf
Additional Documents • 3.03 MB
05dt17apr.pdf
Additional Documents • 3.28 MB
06dt17apr.pdf
Additional Documents • 3.01 MB
07dt17apr.pdf
Additional Documents • 3.17 MB
08dt17apr.pdf
Additional Documents • 3.48 MB
09dt17apr.pdf
Additional Documents • 2.79 MB
20dt17apr.pdf
Additional Documents • 2.69 MB
11dt17apr.pdf
Additional Documents • 3.33 MB
12dt17apr.pdf
Additional Documents • 3.16 MB
13dt17apr.pdf
Additional Documents • 4.61 MB
14dt17apr.pdf
Additional Documents • 3.65 MB
15dt17apr.pdf
Additional Documents • 3.01 MB
17dt17apr.pdf
Additional Documents • 3.06 MB
18dt17apr.pdf
Additional Documents • 2.42 MB
19dt17apr.pdf
Additional Documents • 2.82 MB
40dt17apr.pdf
Additional Documents • 3.16 MB
31dt17apr.pdf
Additional Documents • 3.12 MB
32dt17apr.pdf
Additional Documents • 2.90 MB
33dt17apr.pdf
Additional Documents • 3.66 MB
34dt17apr.pdf
Additional Documents • 2.31 MB
36dt17apr.pdf
Additional Documents • 2.55 MB
37dt17apr.pdf
Additional Documents • 3.82 MB
38dt17apr.pdf
Additional Documents • 3.36 MB
39dt17apr.pdf
Additional Documents • 3.47 MB
49dt17apr.pdf
Additional Documents • 2.89 MB
41dt17apr.pdf
Additional Documents • 3.86 MB
42dt17apr.pdf
Additional Documents • 3.41 MB
43dt17apr.pdf
Additional Documents • 2.87 MB
44dt17apr.pdf
Additional Documents • 2.77 MB
45dt17apr.pdf
Additional Documents • 2.46 MB
46dt17apr.pdf
Additional Documents • 2.58 MB
47dt17apr.pdf
Additional Documents • 2.65 MB
48dt17apr.pdf
Additional Documents • 3.33 MB
57dt17apr.pdf
Additional Documents • 2.59 MB
50dt17apr.pdf
Additional Documents • 3.37 MB
51dt17apr.pdf
Additional Documents • 4.04 MB
52dt17apr.pdf
Additional Documents • 4.23 MB
53dt17apr.pdf
Additional Documents • 3.29 MB
54dt17apr.pdf
Additional Documents • 2.81 MB
55dt17apr.pdf
Additional Documents • 3.61 MB
56dt17apr.pdf
Additional Documents • 3.14 MB
65dt17apr.pdf
Additional Documents • 3.63 MB
58dt17apr.pdf
Additional Documents • 3.27 MB
59dt17apr.pdf
Additional Documents • 2.82 MB
60dt17apr.pdf
Additional Documents • 3.59 MB
61dt17apr.pdf
Additional Documents • 3.35 MB
62dt17apr.pdf
Additional Documents • 2.83 MB
63dt17apr.pdf
Additional Documents • 3.76 MB
64dt17apr.pdf
Additional Documents • 3.73 MB
73dt17apr.pdf
Additional Documents • 3.06 MB
66dt17apr.pdf
Additional Documents • 3.91 MB
67dt17apr.pdf
Additional Documents • 4.08 MB
68dt17apr.pdf
Additional Documents • 3.50 MB
69dt17apr.pdf
Additional Documents • 2.60 MB
70dt17apr.pdf
Additional Documents • 3.39 MB
71dt17apr.pdf
Additional Documents • 3.00 MB
72dt17apr.pdf
Additional Documents • 3.70 MB
82dt17apr.pdf
Additional Documents • 3.35 MB
83dt17apr.pdf
Additional Documents • 2.74 MB
84dt17apr.pdf
Additional Documents • 2.41 MB
85dt17apr.pdf
Additional Documents • 3.19 MB
74dt17apr.pdf
Additional Documents • 2.52 MB
75dt17apr.pdf
Additional Documents • 3.91 MB
76dt17apr.pdf
Additional Documents • 3.84 MB
77dt17apr.pdf
Additional Documents • 3.36 MB
78dt17apr.pdf
Additional Documents • 2.59 MB
79dt17apr.pdf
Additional Documents • 3.69 MB
80dt17apr.pdf
Additional Documents • 2.84 MB
81dt17apr.pdf
Additional Documents • 2.76 MB
96dt17apr.pdf
Additional Documents • 4.06 MB
86dt17apr.pdf
Additional Documents • 2.48 MB
87dt17apr.pdf
Additional Documents • 1.91 MB
88dt17apr.pdf
Additional Documents • 3.20 MB
89dt17apr.pdf
Additional Documents • 2.05 MB
90dt17apr.pdf
Additional Documents • 4.08 MB
91dt17apr.pdf
Additional Documents • 4.08 MB
92dt17apr.pdf
Additional Documents • 4.01 MB
93dt17apr.pdf
Additional Documents • 3.95 MB
94dt17apr.pdf
Additional Documents • 4.17 MB
95dt17apr.pdf
Additional Documents • 4.01 MB
106dt17apr.pdf
Additional Documents • 3.73 MB
97dt17apr.pdf
Additional Documents • 3.89 MB
98dt17apr.pdf
Additional Documents • 4.04 MB
99dt17apr.pdf
Additional Documents • 3.96 MB
100dt17apr.pdf
Additional Documents • 3.99 MB
101dt17apr.pdf
Additional Documents • 4.02 MB
102dt17apr.pdf
Additional Documents • 3.78 MB
103dt17apr.pdf
Additional Documents • 3.77 MB
104dt17apr.pdf
Additional Documents • 3.83 MB
105dt17apr.pdf
Additional Documents • 3.83 MB
114dt17apr.pdf
Additional Documents • 3.68 MB
107dt17apr.pdf
Additional Documents • 3.64 MB
108dt17apr.pdf
Additional Documents • 3.82 MB
109dt17apr.pdf
Additional Documents • 3.65 MB
110dt17apr.pdf
Additional Documents • 3.86 MB
111dt17apr.pdf
Additional Documents • 3.94 MB
112dt17apr.pdf
Additional Documents • 3.66 MB
113dt17apr.pdf
Additional Documents • 3.76 MB
TD13R.pdf
Additional Documents • 0.67 MB
TD17R.pdf
Additional Documents • 9.85 MB
TD18R.pdf
Additional Documents • 7.11 MB
TD19R.pdf
Additional Documents • 0.62 MB
TD20R.pdf
Additional Documents • 0.82 MB
TD21.pdf
Additional Documents • 0.60 MB
TD22.pdf
Additional Documents • 0.51 MB
TD23.pdf
Additional Documents • 0.21 MB
30dt17apr.pdf
Additional Documents • 3.74 MB
21dt17apr.pdf
Additional Documents • 3.61 MB
22dt17apr.pdf
Additional Documents • 3.15 MB
23dt17apr.pdf
Additional Documents • 2.84 MB
24dt17Apr.pdf
Additional Documents • 3.66 MB
25dt17apr.pdf
Additional Documents • 2.20 MB
28dt17apr.pdf
Additional Documents • 3.54 MB
29dt17apr.pdf
Additional Documents • 3.24 MB
STD29R1.pdf
Additional Documents • 9.11 MB
TD01R.pdf
Additional Documents • 0.57 MB
TD02R.pdf
Additional Documents • 0.71 MB
TD03R.pdf
Additional Documents • 0.76 MB
TD04R.pdf
Additional Documents • 0.79 MB
TD05R.pdf
Additional Documents • 1.69 MB
TD06R.pdf
Additional Documents • 1.49 MB
TD07R.pdf
Additional Documents • 1.91 MB
TD08R.pdf
Additional Documents • 4.45 MB
TD09R.pdf
Additional Documents • 0.57 MB
TD11R.pdf
Additional Documents • 0.69 MB
TD12.pdf
Additional Documents • 0.62 MB
Download all tender documents and submit your bid