Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.0 LAccepted-AOC SANKARAM VEEDU KAYALAM P O MAVOOR | ₹6.0 L | 1 | Accepted-AOC LOWEST BIDDER |
| 2 | 2₹6.1 LRejected-AOC NEERKATTOPOYIL HOUSE CHENNAMANGALOOR POST MUKKAM KOZHIKODE | ₹6.1 L | 2 | Rejected-AOC L2 |
Updated dates
Tender Value
₹6.1 L
EMD Value
₹15,400
Closing Date
18 Feb 2026, 3:00 pmClosed
Executive Engineer, PMU, Kozhikode
Executive Engineer, Project Management Unit,Vydhyuthi Bhavanam,Kozhikode
DRAWING HT AB CABLE AND ERRECTING DTR AT KOLICHIRA UNDER ELECTRICAL SECTION PERUMANNA
2026_KSEB_832045_1
PMU/KKD/e-Tender/10-R1/2025-26 Dtd 30-01-2026
Open Tender
Electrical Works
Perumanna
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,534
₹15,400
20 Apr 2026
31 Jan 2026
21 Feb 2026
31 Jan 2026
18 Feb 2026
2 Feb 2026
Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).
Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).
Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.
Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.
Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling
Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.
Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.
Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.
Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.
Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.
Additional rate for excavation of Pit for A type pole in Hard Laterite.
Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.
Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles
Erection of Anchor clamp / dead end clamp for 11kV ABC of any size
Erection of suspension clamp for 11KV ABC of any size
Erection of Stainless Steel Strap and Buckles
Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
Dismantling one ordinary street light/CFL/LED fitting from pole, repairing and refitting the same in position and giving connection.
Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.
Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.
Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm
Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable
Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.
Cutting trees beyond 30cm but upto and incl. 60cm girth, cutting branches, removing root completely and stacking (where space for falling trees is not enough).
Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.
Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.
Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.
Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading
Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.
Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.
Erection of LT 3 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).
Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.
Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.
Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.
Fitting and providing one Strut using A type pole incl. digging & back filling pit.
Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.
Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.
Drilling hole of various sizes on existing Channel/Cross Arm.
Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).
Transporting Transformers by hired vehicle to a distance beyond 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs (Running km).
Fitting one set (3No.) 11kV LA and giving connections excluding earthing.
Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles
Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation
Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.
Erection of Anchor clamp / dead end clamp for LT ABC of any size
Erection of suspension clamp for LT ABC of any size
Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).
Erecting one LT PSC Pole in position incl. digging & back filling pit.
Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite.
Providing Stay for LT poles incl. digging & back filling pit.
Additional rate for excavation of one Pit for LT Pole/LT Stay in Soft Rock.
Soild block masonry: Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
5.1: Providing and laying in position specified grade of reinforced cement concrete,- All work up to plinth level: 5.1.2 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo Mechanically Treated bars of grade Fe-500D or more)
DSR 2018 60.70.1 Dry rubble masonary. Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
13.33.1 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing (cost index(c) : 1 included in Rate)
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Plastering using 12mm cement plaster of mix 1:4 (1 cement:4 fine sand) including all cost of materials, labour charges etc.complete.
Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm
50.2.26.1 Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-incharge. (cost index(c) : 1 included in Rate)
Providing and fixing PVC pipes including fixing the pipe as per direction of Engineer-in- Charge 75 mm dia 4 Kfg/cm2 - External work - Details of cost for 10.00 metre
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1398394.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Biddoc_ABC.pdf
Tender Documents • 0.82 MB
BOQ_1398394.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid