Estimation for Obtaining New EB power Loads for Resource recovery center at Jothi nagar in Thoothukudi city municipal corporation

Amount

Supply and Fixing of 3 Compartment cubical panel TNEB Meter board suitable for 150KW capacity loads, made up of suitable angle iron frame work of suitable size which is approved by MRT / TNEB using angle iron of size 11/2" x 11/2" x 1/4" rigidly fixed on wall covered with hylam sheet of 6 mm thickness with 32mmx6mm copper Flat Bus Bar arrangement for Phase Load and 25mmx6mm for Neutral , necessary bolts and nuts , Neutral Link, etc., complete as per standard and as directed by the dept. officer suitable for availing LT CT Service connection.

Supply and fixing of 3 Phase open Type HRC Fuse Carrier arrangement with 3Nos. of 630V Open Type Fuse base with 250A HRC Fuse Link -3Nos.and Fuse Puller as per IE Rules requirement and TNEB Standard on Suitable MS "L"angle with 12MM Hylem Sheet with angle iron frame work as per TNEB requirements and as directed by the dept. officers.

Supply, delivery and installation of Wall mounting type vermin, weather and dust proof factory made MV / SSB Panel board of suitable size size fabricated with 32mmx6mm copper Flat for Phase and 25mmx6mm copper Flat for Neutral bus bar with PVC sleeved using angle iron of size 11/2" x 11/2" x 1/4" rigidly fixed on wall with the standard accessories with Incomer and Outgoing Feeders complete with MCCB, standard specifications as per IE rules

Design, Fabrication, Supply and Erection of M.V / ATS Cubical bus bar panel board arrangement of Suitable size as per site requirement made up of 16 SWG MS Sheet enclosure and consisting of 32 mm x 6mm Copper main bus bar and 25mm x 6mm copper axilary bus arrangement to link the 315 amps. mains with suitable size of MS box and " L" angle base frames (1 1/2x 1/4) to Facilitate the DG supply for two service connection functional operations at a time with vermin and heat proof powder coated painting as per IE rules and standard specifications with Supply and Delivery of 250 Amps. -2Nos. and 315A - 1No as per standard including all labour and Transportation charges etc., complete.

Supply,Laying and Clamping of 3 1/2 core x 185 sq.mm 1.1KV grade PVC armoured LT UG aluminium conductor cable conforming to IS 1554 Part I with ISI marking etc., complete as per std. specification.

Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Providing Cable tray arrangements with MS angle and flat materials suitable for 185 Sq.mm LT UG Cable roughting from the TNEB Metering panel room to DG panel room as per standard and as diredcted by the dept. officers

Provision for electrical materials such as 300/5A CT Coil and allied electrical componants as required by the TNEB MRT section and as per the IE rules.

Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp as directed by the dept. officer

Supply and run of 25 x 3 mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection as directed by Dept. offciers.

RAJ ENGINEERING (BID ID -1256057)