E-tender for FURNISHING and Other works of New Premises of BO Johlan at Vill Johlan,Ludhiana

Providing & Fixing false ceiling at 9’-0” ht. (as per drg.) of India Gypsum Ltd. (GMFSC-4.1) using 12.5mm thick Gypboard, paper tape, jointing compound, G.I. Sections marked “Gypsteel” to be placed at 4’-0” C/C in one direction and at 1’-6” C/C in other direction. The false ceiling shall be finished properly after cutting / making holes for fixing light fixtures including three coats of oil bound distemper paint etc. complete as per drgs.

Making Cove in Gyp false ceiling.

PPGI METAL SHEET FALSE CEILING: Providing & fixing in position false ceiling in Armstrong 600 x 600 mm PPGI Metal microlook lay-in standard perforated tiles silhouette 38 made of 120 gsm pre-painted galvanised iron, Grade-GPL as per IS277 (2018) with coating durability as per IS 4246 color as approved by Bank/architect with 15mm exposed grid system (Grid frame shall have black groove at bottom) by Armstrong Co. with suspenders. Making necessary framework for A.C. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for A.C unit .

TOUGHENED GLASS DOORS, FIXED GLASS & PARTITION: Providing & fixing 12 MM thick toughened glass for door with complete patch fittings such as floor spring, handles, lock and L-brackets etc. The job shall also include etching design of PSB logo on glass.

Providing and fixing wooden partition made of internal frame of alum sections of size 1.75"x1.75" placed at 2’-0” c/c vertically and horizontally finished with 9mm thick Bison board on both sides with 1.00 mm thick laminate on both sides with horizontal grooves. These partitions shall have 5.00 mm thick glass (etching as per design) above 2’-6” ht. or 4’-0” ht with beading ½”x1 1/2” . The rate of partition shall include providing & fixing wooden door finished with laminate on both sides and partly glass, but with complete hardware required such as latches, stopper. The low ht. partition shall have rubber-wood / teak-wood gola of size 3” x ¾” which shall be polished as per shade reqd.

Low ht. partitions with 12 mm thick glass.

Full ht glazed partition with/without 5mm th glass.

Cash-Cabin’s pts (7’-3” high)

Cash cabins’ as well as single windows’ front ptn. with 12mm th. Glass.

Rear partition for banking hall.

Cost Mortice locks (with handles)

Cost of Multipurpose locks for storages, drawers etc.

Cost door closers.

Cost floor springs.

Cost of Knight Latches

Aluminum grill.

P/F wall paneling Full height upto 9 feet on alum section frame 1” x 2” placed @ 2’-0” c/c horizontally & vertically @ 1’-0” C/C, finished with 9mm thick Bison board by making horizontal grooves of size 3/8”x3/8”, 1.00 mm thick laminate as per design, the paneling shall be closed with 2” x 1” rubber wood beading

Pin-up board finished with cotton cloth & rubber wood beading.

Banking Counters with 1½” thick post-form factory made Tops: Providing & fixing Banking Counters (SW) as per design, 2’-6” ht. & 3’-3” ht. (2 heights). The banking counters shall have the provision to adjust the key board, drawer, storage complete shelf for CPU at bottom and foot rest. The banking counters shall be made of 19mm thick commercial board, with rubber -wood Gola of size 1½ ”x ¾ ”, which is to be polished as per color scheme. The counter shall be finished with 1mm thick laminate of approved shade / colour, handles, magnet catchers, hinges. Inside of counters shall be painted with synthetic enamel paint as per color scheme

Providing & fixing notice board of size 2’-6”x 4’-0” finished with ivory colour 1mm th. laminate, 1”x1” th. rubber wood beading on all sides.

Providing & fixing soft boards of size 3’-6”x 2’-0” (covered with openable glass shutters) on 10mm th. comm. ply 12mm th. soft board finished with cotton fabric , 1”x2” rubber wood beading.

ACP PANELING IN ATM:- Providing & fixing in position ACP (Aluminium Composite Panel) wall panelling having minimum ACP thickness of 3mm and minimum foil thickness of 0.25 mm on both sides with Aluminium sections of 1.5" X 1" @ 2'-0" C/C both ways. Panels shall be neatly fixed to the frame with 3M or equivalent adhesive and joints shall be finished with silicon based sealant. ACP shall be approved as per bank's approval. Item shall include proving & fixing additional sections as required for fixing Indoor AC units, proper access panel for ATM power point, proper locking arrangement for plug point by providing additional framing etc. complete colour scheme as per brand manual.

ACP Partition in ATM with Door as per specification in pt no 19

Providing and fixing rolling shutter box for branch and ATM panelling / enclosure of required size as per description of ACP panelling above. The rate shall inclusive of necessary hardware fittings like hinges, screws, tower bolts sealant, trap door, locking arrangement etc complete.

Providing & Fixing 15 W LED ROUND DOWNLIGHTER LCND-15-CDL of Crompton.

Providing & fixing LED tube lights 1x20W of Philips.

Providing & Fixing wall fans: Khaitan / Crompton Greaves / Orient.

Exhaust Fans 12” Dia : 1400 rpm (Double ball bearing) Heavy duty Crompton Greaves / Phillips.

Providing & Fixing ceiling fans: Khaitan / Crompton Greaves / Orient 4’ dia.

Cost of modular regulators of Havells / Anchor ROMA makes.

ELECTRICAL POINTS : Providing laying, fixing & testing of electrical points including wiring from MCB’s to switches, plate type switches, socket & M.S. Modular boxes with rust proof treatment size to accommodate the required nos. of switches & sockets plus circuit wiring from switches to lights/fans/fixtures etc. wherever required complete with earthing 1.00 mm2 multi strand wire in 25mm dia. Unbreakable PVC conduit ISI marked with specials under floor / wall & above false ceiling or making truff under / along work – stations including chase cutting, disposal of melba away from the site and repair of the same with cement mortar, copper conductor wires only will be used of approved make.

Air Conditioning wiring between Indoor & Outdoor units : Supplying & laying of Eletrical flexible cable of 4/5x4.00sq.mm multi strand suitable for 2.0 Tr , 1.5 Tr & 1.00 Tr H.W Split/Cassette unit between Indoor & Outdoor units shall be considered as ONE length for the purpose of measurement. (Make : Havells/Legrand/ KEI/ Finolex)

A/C wiring from AC D/B to indoor unit with 5 x 2.5 sq.mm. with one no. 1.5 sq.mm. insulated copper conductor of PVC insulated PVC sheathed armored cable of 1100 V (IS-1554 part I) and fixing of cable on wall with suitable size of clamps/ saddles or laid in floor/recess wall including cutting of floor/wall and making good the damages etc.

P/F metal clads for A.C.'s: Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

15 Amp (Main Pts) wiring with 2.5mm sq. multi strand PVC copper wire with socket & switch. (Main Pts)

5 Amp 3-pin plug point wiring (on all tables & each switch Board) with 1.5mm sq. multi stand PVC copper wire inc. Plate switches, sockets, plugs. Etc.

Call-bell point wiring including Ding-dong bell with 1.5mm sq. multi strand PVC copper wire including plate switches, sockets, etc.

Electrical lights wiring with single switch, wall fan points with 3-pin socket and switch, lights & exhaust fan point wiring with 1.5mm sq. from D/B to switches & fittings multi strand PVC copper wire including plate switches, sockets, etc. ( For payment no. of switches shall be counted).

Electrical lights wiring with single switch for two downlighters,

Signage wiring – P&F of 3x4mm & copper flexible wire & PVC conduiting of ISI make complete with all accessories like Saddles, bends modular switches etc.

UPS POINTS: P/L & testing electrical three point wiring /circuit wiring having individual circuits for computers with 2.5mm2 Multi-strand copper PVC wire in unbreakable PVC conduits 25mm dia wall thickness 2mm thick with specials under floor / wall & above false ceiling including chase cutting, disposal of malba away from the site and repair of the same with cement mortar, incl. Switches & socket M.S. switch boxes with rust proof treatment size to accommodate the required nos. of Modular switches, sockets etc. & plate type sockets with indicator three in one plate including earthing with 1.00 mm2 multi strand wire complete in all respect.

Set of 6 amp. 4 sockets & 1 switch (Main Pts)

Set of 6 amp. 4 sockets & 1 switch (Secondary Pts)

Providing, laying, testing and commissioning CAT-VI/ Lucent / D-link computer networking cable in PVC conduit in floor or wall from server room to each table with I.O.’s (Socket)

Supplying of patch chords for computers 1m & 2m length.

Elect D/B with all internal connections for electrical and generator connections with 10 sq.mm multi strand copper wire, which shall include the following items.

Amp Meter and voltmeter set

Kit-kats 100 Amp.

Neutral link.

Aluminum bus bar 100 Amp proper tinned.

100 Amp. Main switch MCCB type.

Change –over 100 Amp. 3-Phase of Havells make.

supply, installation, testing and commissioning of factory fabricated distribution board rust inhibited, powder coated sheet fabricated comprising of incoming isolator and outgoing MCB's neutral link or neutral bus, top and bottom detachable entry earthing bolts interconnection and grouting bolts etc complete as reqd. as per details below :-

8 - way SP MCBDB double door in recessed wall including cutting of wall and making good the damages comprising of 1no. 32 Amp DP and 6 no. 6/10 Amp MCBs etc. complete as reqd. (For UPS supply to tables in banking hall)

6 way MCBDB double door comprising of 1 no. 63 amp isolator DP and 4 no. 6/10amp MCBs etc. complete as reqd. (for CCTV, Security etc.)

4 way TPN MCBDB double door comprising of 1 no. 63amp isolator and 6 no. 32 amp DP MCBs ( For Acs & power)

4 way TPN MCBDB comprising of 1 no. 63 amp TPN and 12 no. 6-32 amp SP MCBs etc. complete as reqd. (For lighting circuits & Power Pts)

P/F 15 amp 3-pin plug & tops for UPS input.

Providing & fixing main electrical cable 4- core al. cable armored from elect. pole to meter 35mm dia.

P/F generator wire/cable 16mm 4-core Alum. Cable armoured.

P/L copper pipe with complete insulation required for 1.5 ton split type A.C.s from the place of external units upto the location of inside units.

Providing and laying 25mm dia. PVC pipe heavy duty Diplast make for drainage of water of inside units.

AIR CONDITIONING

Supply and instalation of 1.5 TR 5-Star High Wall Split AC with cordless remote, of Carrier / Blue Star / Voltas

Supply and instalation of 1.0 TR 5-Star High Wall Split AC of Carrier / Blue Star / Voltas

4 KVA Stabilizers

Out Door unit stand for 1.0/1.5 TR AC.

CHAIRS and furniture

3 Seater Sofa Providing and supplying 3 Seater Sofa of approved make such as Eva / Geeken / Duaco (or equivalent), suitable for office use. The sofa shall be made with seasoned hardwood/metal frame, high-density foam cushioning, and upholstered with premium fabric/leatherette of approved shade.The item shall include proper finishing, cushioning comfort, and durable construction suitable for commercial/bank use.The work includes supply, delivery, placement, and installation complete as per approved design and direction of Engineer-in-Charge.