SPECIAL REPAIR / REPLACEMENT TO VINTAGE SEWAGE LINES AT MAKARPURA AND DARJIPURA AND ADDN/ALTN TO SMQ AT DARJIPURA AF STATION BARODA

Amount

Demolition and breaking up 150mm dia drain pipes (salt glazed ware,AC or reinforced concrete) set in cement mortar complete all as specified and directed.

All as per item No 01 above but 200mm dia pipe complete all as specified and directed.

All as per item No 01 above but 250mm dia pipe complete all as specified and directed.

All as per item No 01 above but 300mm dia pipe complete all as specified and directed.

Excavation in trenches not exc.1.50m wide and not exc 1.5m deep for foundation etc or manhole pire hole or laying of sewer pipe etc and getting out in soft/loose soil complete all as specified and directed.

All as per item no 05 above but depth exc 1.5m and not exc 3.00m depth complete all as specified and directed.

M&L for beding to drain pipes including packing under, and hunching in PCC 1:3:6 type C2 using 40 mm graded aggregate against the side of 150mm SWG/NP2 pipes after they are laid and complete all as specified and directed.

All as per item No 7.00 above but 200mm dia pipes complete all as specified and directed.

All as per item No 7.00 above but 250mm dia pipes complete all as specified and directed.

All as per item No 7.00 above but 300mm dia pipes complete all as specified and directed.

M&L for 150 mm bore Reinforced concrete pipe class NP2, laid and jointed complete with collars complete all as specified and directed.

All as per item No 11.00 above but 200mm dia pipes complete all as specified and directed.

All as per item No 11.00 above but 250mm dia pipes complete all as specified and directed.

All as per item No 11.00 above but 300mm dia pipes complete all as specified and directed.

Retunning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated materials not exc. 50m and depositing where directed. complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar/lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.all as specified and as directed.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded aggregate)as in foundation filling and mass concrete complete all as specified and directed.all as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) set in cement mortar 1:4 as in cover slab supported on wall complete all as specified and directed

M&L rendering 15mm thick cement plaster on concrete/brick surfaces in CM 1:4 finished even and smooth without using extra cement. complete all as specified and directed.

S&F MS steel TMT bars upto 10mm dia cut to length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia complete all as specified and directed.

M&L cement concrete Type B1 1:2:4 (20mm graded aggregate) as in copping complete all as specified and directed.

Cement concrete (1:2:4) type B-2 (using 40mm gradede aggregate) in surface channel & drain and benching of manhole including finishing the top of benching even and smooth using extra cement. complete all as specified and directed.

Dismantling of 75/100mm dia cast iron drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L 100mm did Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/wall complete all as specified and directed.

M&L 75mm did Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/wall complete all as specified and directed.

M&L Salt-glazed stoneware gully traps 150x150mm, square or round mouthed, tvpe 'P' complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any length any type complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends any length any type complete all as specified and directed.

S&F 110mm PVC (SWR) branch piece double (double Y) equal or unequl complete all as specified and directed.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4 type B-2 using 20mm graded stone aggregate as in Plinth Protection complete all as specified and directed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the fram) complete all as specified and directed.

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the fram) complete all as specified and directed.

Taking down shutter only of any description n exc 1Sqm and removing complete all as specified and directed.

Taking down shutter only of any description exc 1Sqm n. exc 2Sqm and removing complete all as specified and directed.

S&F Powder coated aluminium work of for door, windows and ventilators and and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading ,plaster work on edges during fixing (if required) etc complete all as specified and directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permice complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc complete all as specified and directed.

All as per item 44.00 above but on vertical surfaces/skirting complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (25mm graded aggregate) as in levelling course floor complete all as specified and directed.

M&L for 20-22mm thick machine cut & polished kota stone as infloor, shelves, platform or similar works including cutting grove in the walls or laids on any support and fixing of stone in cm 1:3 all including rubbing and polishing complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick on conc surface of ceiling CM 1:3 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment by scraping down thoroughly, rubbing down and washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of exterior ACRYLIC Emulshion paint (Colour or shade as approved by GE) over and including a coat of primer on walls as per manufacturers instruction including necessary steel scafolding upto 4th storey complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed

M&L for preparation of old decorated surfaces of walls including cornices , pilasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil bound emulsion distemper on wall surfaces and to be applied only by the authorised applicater of manufacturers (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

M&L preparation of old surfaces and applying putty on wall/ceiling surface finished complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including cornices , pilasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed

All as per item no. 59.00 above but one coat of white wash on ceilieng complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of steel and iron surfaces over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L filling surface cracks not exc 5 mm to 7 mm wide with "Dr fixit" cracks X power or equivalent polymer molified cracks filler all as per manufacturer instructions complete all as specified and directed.

Preaparation of new plaster wall surface and applying 3 coats of white wash on wall surface complete all as specified and directed

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound emulsion distemper on walls (as approved by GE) including necessary priming coat and to be applied only by the authorised applicator of manufacturer(as approved by GE) complete all as specified and directed.

M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats complete all as specified and directed.

M&L Factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter complete all as specified and directed.

M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete all as specified and directed.

S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed.

S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed complete all as specified and directed.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

All as per item No 73.00 above but 150mm long complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed.

S&F Hasp and staple,safety type aluminium anodized including bolt to hinge plate and fixed with screws 150 mm size complete all as specified and directed.

S&F door stopper of 150 mm size (ISI Marked) aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate fixed in floor complete all as specified and directed.

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair 25 mm dia curtain drapery rod decorative type cut to length and fixed complete all as specified and directed.

S&F in repair bracket suitable for 25mm dia curtain rod with steel screw/ wooden screw complete all as specified and directed.

Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Dismantling water tanks exc 250 but n.exc 500 Litres capacity complete all as specified and directed.

S&F rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F, in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.

S&F 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S & F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. complete all as specified and directed.

S&F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipecomplete all as specified and directed.

S&Fin repairs 32mm PVC waste pipe for wash hand basin., 600mm long complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S & F in repairs Soap dish PTMT, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantaling of unreinforcement lime concrete/cement concrete in padding to roof slab and removing the rubbish off premisescomplete all as specified and directed.

M&L for providing cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate laid to stop 1:30 in padding for WPT over roof slab complete all as specified and directed.

M&L for providing cement concrete type B 0, 1:2:4 using 12.5mm graded aggregate in cover fillet of 75 mm radious at junction of roof slab and parapet wall etc complete all as specified and directed.

Removing of existing unserviceable water proofing treatment taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and directed.

M&L for applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3.5 Kg/Sqm in weight with non-woven polyster reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacture instruction and all as per specified particular specification complete all as specified and directed.

Note:- Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receve the primer and all as directed by the Engr-in-Charge.

Necessary guirantee certificate shall be given by the ma enfficacy of theufactures for the material for 10 years from the date of completion of work.

APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on verticle position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only.Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions.

APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum.

Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment.

If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider.

Codntractor shall produce the certificate from the manufacture for the authorised applicator before commencement of work.

M&L10mm thick screed bed in CM 1:4 mixed with WPT 3% by weight of cement complete all as specified and directed.

Supply only intergral water proofing compound complete all as specified and directed.

M&L removing the tank over roof and re-fixing in the same position (or lowering if requried) including cleaning all as specified and as directed Note:- rate quoted shall deemed to be inclusive of making good the existing disturbed surface as directed by Engr-in-Chatrge.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc complete all as specified and directed.

M&L Brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for sunken treatment to sunken portion (inc necessary dismantling of tiles and PCC along with req PCC at site of mix 1:2:4 of req thickness) with 10mm thck plaster in CM 1:4 with WPC Liq complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 tck plast in CM 1:4 mixed with complas 421 in sunken portion of WC and CI pipe joint shall be filled inc filling of lean conc 1:5:10 complete all as specified and directed.

S&F in repair cast iron floor trap 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B1, (1:2:4) complete all as specified and directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed (FRLS) multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface of walls/ceiling by means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes suitable for mounting modular fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable as earth continuity conductor to common earth dolly complete all as specified and directed for the following :-

One light/fan point controlled by one one/way switch.

One 3 pin 5 Amps socket outlet on independent board

One light point controlled by two, two way switches

All as per item No 115.00 above but wiring with 2.5 sqmm (FRLS) multistranded copper conductor unsheathed and 1.5 sqmm (FRLS) copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed.

S&f switch piano flush type single pole one way 5 Amp 240 Volts. complete all as specified and directed.

S&f switch piano flush type single pole two way 5 Amp 240 Volts. complete all as specified and directed.

S/F socket out let 2 in 1, 3 pin, 5 Amps flush type 240 Volt. complete all as specified and directed.

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. complete all as specified and directed.

S/F switch socket combination 3 pin 5 and 15 Amp 2 in one flush type complete all as specified and directed.

S&F vertical DB TPN 4 way with and including MCCB TPN 63Amp 415volts 25KA complete all as specified and directed.

S&F MCB DB SPN 8 Way complete all as specified and directed.

S & F MCB SP 6 to 40 Amp, 240 volts complete all as specified and directed.

S & F MCB SPN 32 to 63 Amp, 240 volts complete all as specified and directed.

Supply and fix in replacment bracket for security light made up of 25 mm dia, 1.6 mtr long GI pipe, light grade, bent to shape required length, fixed to wall with 2 clamps made off 20x3 mm mild steel flat minimum 15 cm long, 4 nos 8 mm dia bolts with nut ccomplete all as specified and directed.

Supply and fixing LED security light luminaire 25 Watt freedom , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. Make. Havells/ Halonix/Orient /Syska/Bajaj

Supply and fixing repair in Stepped/socket type electronic fan regulator heavy duty typeA/C 240 complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised earth lead wire 4 mm dia by means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

M & L for sub main wiring using two runs of single core 6 Sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawn through and including PVC Casing Caping/PVC Conduit with accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed copper conductor cable including taking down old unservicable sub main wiring any type complete all as specified and directed. Note : Two runs of single core 6sqmm cable, one run of 4sqmm cable and PVC casing caping/counduit shall be measured as a one length.

S&F Ceiling fan 1200 mm sweep, BEE 5 star rating energy efficient with complete accessories and connecting to the point wiring with necessary felxible copper conductor cable of multistranded three core of suitable length from fan to the ceiling rose complete all as specified and directed.

Supply and fixing copper LED Tubelight fitting with battery/Inverter, ENERGY Efficient 22 Watt 2000 lumen bright light with 25000 burning hours complete all as specified and directed.

Supply and fixing LED Tubelight fitting ENERGY Efficient 10 Watt 1000 lumen bright light with 25000 burning hours complete all as specified and directed.

SHREE KHODIYAR TRADERS