GE/J/A 2021-22 (9047/E8)

Amount

GI Charpoy (Long rail) Drawing No : FD-220 Removing existing old and unserviceable long rail from charpoy GI pipe and supply and fix new long rail of GI Pipe 32 mm bore medium grade (ISI marked) threaded at both end fixed in position complete all as directed and shown on drawing.

GI Charpoy (Short rail) Drawing No : FD-220 Removing existing old and unserviceable short rail of charpoy GI and fabrication and fixing of short rail by cutting and converting from long rail obtained here in before threading both end complete all as shoiwn on drawing and as directed Engr-in-Charge.

Removing existing old and unserviceable legs from charpoy GI pipe and Fabrication and fixing of legs by cutting and converting from short rails as obtained here in before cutting and threading at one end and supply and fixing MS plate 3 mm thick, 40 mm dia by welding at other end of legs including provision of two parellel MS clamps made of 25x3 mm flat iron duly welded from MNF set fixed in position and painted with two coats of synthetic enaml paint black over coat of red oxide primer complete. Drawing No : FD-220

Removing existing old unserviceable GI check nut from the frame of charpoy GI 32mm bore and supply and fix of new check nut, fixed in position all as shown in drg and as directed. Drawing No : FD-220

Removing existing unserviceabel GI elbow 32mm dia from the frame of GI charpoy and supply & fixing of new Elbow GI 32mm (ISI Marked) and fixed in position all as shown in drg as directed. Drawing No : FD-220

Removing of unserviceable nylon newar from Charpoy GI Pipe tightening of loose components of Complete charpoy and S&F plywood 12mm thick BWR Grade (ISI marked) confirming to IS-303 of required size (out of 7'x3') 12mm x5mm thick 2nd class hard wood half round beading all round the plywood edged duly polished and round at corner fixed with fevicol and headless nails with mild steel galvanized iron nuts and bolts of required size and suitable length. S&F three stiffener made out of flat iron 900x50x5mm duly painted with two coat of black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over the long rails of drilling holes in flat iron and long rail by 01 No semicircular top bolts of 6mm diax75mm long for every stiffener and every side total 02 Nos for every stiffener, 01 No semi circular to bolts of 6mm diax50mm long shall be fixed on middle of the every stiffener to fix the plytop S&F two stiffener made out of flat iron 75x25x5mm duly painted with two coats of black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over and paraller to the short rail of drilling holes in flat iron and short rail by 2 nos semi circular top bolts of 6mm diax75mm long on every short rail total 10 Nos nut and bolts with semi circular top of 6mm diax75mm long and 03 Nos nut and bolts with semi circular top of 6mmdiax50mm long with steel washers to be used for fixing of plywood top all as specified and as directed by Engr-in- Charge. Drawing No FD-220.

Removing exising old/wornout/unserviceable nylon newar any type from charpoy GI pipe/IP folding and tightening the frame of charpoy including supply and reweaving on top and bottom portion of charpoy with new nylon tape newar 50 to 55 mm wide virgin qulity as approved by GE white of 1st quality weight of newar shall between 1.45 Kg to 1.50 Kg each charpoy and shall be closely woven as per pattern shown on drawing and as directed by Engr-in-Charge. Drawing No. FD-220. Make : Kamal brand/ Magaldeep/ Star brand.

Note:- The contract amount shall be arrived at after deducting amount of "Schedule of Credit" from the Total quoted amount.

BHARAT BUILDERS

Surendra Singh

Shri Maruti Trading Co.