REPAIR TO CERTAIN BR WORK IN WATER SUPPLY AND SEWAGE INSTALLATION UNDER GE UTILITY AMBALA

Amount

Dismantling post or strut embeded in concrete (wood/steel/RCC) any section embeded in concrete including taking out embeded portion and making good complete all as specified & directed.

Dismantling barbed wire of any description complete all as specified & directed

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft and loose soil complete all as specified and directed

Material & Labour for cement concrete 1:3:6 type C 2 using 40 mm graded stone aggregate as in foundation filling, post hole filling and mass concrete etc complete all as specified and directed.

Mild steel work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified & directed

Supply & Fixing 11 to 15 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with length of bolt exc 5cm but not exc. 10 cm long complete all as specified and directed

Supply & fix chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc., including provision of binding wire including dismantling of existing complete all as specified and directed.

Material & Labour for mild steel bars 10 mm dia and over cut to length bent to shape required of grade Fe-410-W(Gde.E-250) fixed to chain link fencing complete all as specified & directed.

Supply & Fixing galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified & directed

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

Supply & Fixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (U) Ambala/HQ CWE AMBALA. (ii) Glazing, wire gauge, and guard bars shall be included in quoted rate and not paid separately (iii) For payment purpose of double shutter area of opening shall be measured.

Surface Excavation n.Exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified & directed

Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified & directed

Material & Labour for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in Fire breaker/Plinth protection/ path with & including 10mm wide, 30mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length. (ii) 30 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

Material & Labour for 100 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in Hard standing/ path and top of the concrete will be chequred finish complete all as specified and directed.

Material & Labour for 60mm thick (M-35 grade concrete) machine pressed precast concrete interlocking paver block of approved design and shape confirming to IS 15658-2006 with a crushing strength not less than 250 kg/sqmm with grey cement and pigment laid over 25mm thick sand cushning complete all as specified & directed.

Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour for Providing cement concrete in edges Type B1 1:2:4 using 20 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

Material and labour for repair to chajja/ roof Projection using PCC 1:2:4 type B-0 or dubbing out average average 20 mm thick incl taking down/demolation of loose particles, all necessary form work and finishing the exposed surfaces of concrete even & smooth with 5mm thick rendering in CM 1:4 complete all as specified & directed.

Material and labour for glazed ceramic coloured tiles of size 300x450x7-8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over 10mm thick rendering in CM 1:4 on brick wall including dismantling of existing tiles complete all as specified and directed.

Material & Labour Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and fair without using extra cement including taking down existing plaster complete all as specified & directed.

Material & Labour for 15mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement including taking down existing plaster complete all as specified & directed.

Material & Labour for two coat of white wash on the walls , pillars, cornicess of old decorated brick/concrete, plastered or unplastered surfaces of walls, etc including taking down existing plaster complete all as specified and directed.

Material & Labour for three coat of white wash on the walls , pillars, cornicess of New decorated brick/concrete, plastered or unplastered surfaces of walls, etc complete all as specified and directed.

Material & Labour preparation for old treated / untreated surfaces of wall,complete removal of existing treatment and applying two coat of weather proof exterior acrylic emulsion paint(shade/tint as approved) on Over head tank any height and bldgs complete all as specified and directed.

Material & Labour preparation of newly plastered surfaces of wall and applying two coat of weather proof exterior acrylic emulsion paint (shade/tint as approved) over OHT/Bldgs & including one coat of alkali resistant primer complete all as specified and directed

Material & Labour for rough cast plaster with and including 15 mm thick rendering in cement mortor 1:3 on brick wall or concrete surfaces as specified in clause 14.22 of SSR Part -I complete all as specified and as directed. Note: (i) After applying the under coat of cement and sand mortor 1:3 not less than 10 mm thick and while it is still in plastic state , the rough cast mixture consisting of crushed stone or fine gravel aggregate(which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.

Material & Labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a primer complete all as specified and directed.

Supply & Fixing mild steel plain black sheet 1.00mm thick as in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified & directed.

Dismantling wrought iron or mild steel work such as rolling shutter of any description not otherwise specially provided for complete all as specified & directed.

Removing excavated material (soils) exc. 50 m and depositing where directed at a level not exc. 1.5 m above starting point complete all as specified and directed

Demolition of brick work built in cement mortar of any description etc complete all as specified and directed.

Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original (except filling of hold fast concrete),complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 sqm but not exceeding 4sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original( except filling of hold fast concrete), complete all as specified and directed.

Supply and Fixing 2nd class hardwood factory made 35 mm thick second class hard wood plain, framed, panelled shutters (any numbers of panels), with panels of timber flat on both sides (feather edged),or vaneered particle board medium density, wood particle board with commercial face vaneers supplied and fitted to chowkatscomplete all as specified & directed

Supply & Fixing 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified & directed

Hacking out old broken glass (any thicknesss, size,quality or description) and supply & fixed 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq.m in each pane, complete all as specified & directed

Material and labour for 20mm thick black granite stone slab of any type, machine cut and machine polished, and moulded in vertical surface as in steps, jambs, pillar and simillar location over and including 10mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry including taking down of old unsv tiles or granite complete all as specified and directed.

Material & Labour for 18-20 mm thick Machinie cut Kota stone slab in flooring on treads, landing laid over including 20mm thick screed bed 1:4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing and demolition of existing complete all as specified & directed

Material & Labour for Mirror polishing on existing Kota stone/ marble stone work where ever required to give high gloss finish including repair/ replacement of broken kota stone/marble stone complete all as specified and diected.

Supply & Fixing Chequred tiles non skid ( coloured) good grip series of size 300x 300 mm x 20-25 mm thick, set ,jointed and pointed in neat cement slurry laid over and including 20 mm thick average thickness cement mortar 1:4 bed, including dismantling complete all as specified and directed.

Supply & Fixing MS as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and for shed rolled angle section use as a truss and for cattel trap including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting,welding or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed

Material & Labour for routine maintenance of rolling shutter area of shutter n exc 10.00 sqm each(Max ht. 3.50 M) :- (a) Taking down hood covers for carrying out routine maintenance and refixing the same (b) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels, lath etc and taking down helical springs, rollers and other accessories etc. (c) Refixing the serviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels etc. (d) Cleaning, oiling, greasing etc complete of all movable parts all as required at site. (e) Gear box and helical spring shall be measured and paid separately.

All as per item No 44 above but area of rolling shutter exc 10 sqm but n exc 20.00 sqm each (Max ht. 5.15 M) complete all as specified & directed

Supply and fixing of mild steel framed work as in ornamental gates or other section with gusset lates,rails, braces, grills, pintal etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. including taking down of existing complete all as specified and directed. conforming to Fe-290 (Gde E-165), and incl dismantling of old unsv gates /door complete all as specified and directed and directed.

Material & Labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course complete all as specified and as directed.

Supply & Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and averae width of aperture 1.40mm and fixed with with stainless steel wire staples including taking down existing complete all as specified and directed .

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed.

Supply and fixing Butt hinge medium wt. cold rolled MS, size 100 mm complete all as specified and directed.

Supply and fixing Aluminium handle, any type, size 100 mm complete all as specified & directed

Supply and fixing 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and directed.

Supply and fixing 200 mm long, Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed dia of bolt not less than 12mm complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws complete all as specified and directed.

Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws complete all as specified and directed.

Dismantling Plain or corrugated steel / asbestos sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Material & Labour for Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:6) base, complete all as specified & directed

Supply and fixing Steel rolling shutters 1.25mm, with ball bearing, as specified including top cover, anchoring rod, pipe shaft, Hood cover 1.25 mm thick, curtain, hold fast stopper, square bar guide channel, bracket plate, lock plate, handle, sliding lock, pulling hook, hasp and staple and one shop coat of primer; erected in position as directed by Engr-in-Charge, push pull or manual type complete all as specified & directed.

Note:- Amount of credit of Rs. 129586.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in PDFf form which will be deducted offline while acceptance of tender.

RONKI RAM AND COMPANY

R. P. Suppliers and Construction Co.

Puneet Sharma

M/s Guddu Builders

AR CONSTRUCTIONS

Anil jindal and sons