Laying Speed B.T. Speed Breaker at ward no. 46 Nawabpura

Scarifying the existing granular road surface to a depth of 50mm and disposal of scarified material within all lifts and leads upto 1000 meters. SSR Sr. No. 3.09

BITUMINOUSMACADAM : Providing and laying bitumnious macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100mm compacted thickness with 3.3% using specified grade of Bitumen -- USING Batchmix type hot mix plant with SCADA, Sensor paver, vibratory roller. (VG- 30 bulk bitumen rates are considered to arrive at rates) SSR Sr. No. 3.40 (NS)

BITUMINOUSCONCRETE :- Providing and laying bituminious concrete using crushed aggregates of grading 1, premixed with bituminious binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over aprevious lyp repared surface, finished, to there quired grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime/tackcoat, for Bitumen of specified grade-- USING Batch mix type hot mix plant with SCADA, Sensor paver, Vibratory roller with stone dust filer. (VG-30 Bulk bitumen rate sare considered to arrive atrates) SSR Sr. no. 3.48 (NS)

Providing bituminous Type a Liquied seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. By mechanical means. Spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. Sr. No. 4.01

Road marking with Hot Applied thermoplastic compound with Reflectorizing Glass Beads on Bituminous surface - providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflecorizing glass beads @250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level, uniform and free from streaks and holes. complete. SSR Sr. No. 6.12a