Loading
Loading…
Loading…
Tender Value
₹2.4 L
EMD Value
₹5,000
Closing Date
3 Sept 2026, 3:45 pm
Executive Engineer, BARANAGAR DIVISION, WS , KMDA
OFFICE OF THE EXECUTIVE ENGINEER, BARANAGAR DIVISION, W and S SECTOR, KMDA., 1, R.N. TAGORE ROAD, KOLKATA- 700076
Replacement of Shutter Gate with allied works for a store room beside chlorine toner room including renovation of alum dosing pipe line inside the premises of 30 MGD Baranagar- Kamarhati WTP (Ph-I)
2026_KMDA_1037853_1
95/EE/BD/W and S/KMDA/NIT(Part-II/3)/2026-27 Date-11.08.2026
Open Tender
CIVIL WORKS
Percentage
60 days
Baranagar- Kamarhati
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹5,000
3 Sept 2026
15 Aug 2026
7 Sept 2026
15 Aug 2026
3 Sept 2026
15 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts). | 1 | Sqm | - | - |
| 2Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10cm. dia bamboo as main post sat therate of 1 metre centre to centre and7.5cm.dia bamboo ties@ 0.75metre apart fitting and fixing with necessary coir,nails etc. as per direction of the Engineer-in charge. a) 3.90 metre height . | |||||
| 2.01 | b) Labour rate for shifting 19th nos. | - | Each | 1 | - |
| 3 | (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete. | 1 | Sqm | - | - |
| 4Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster | |||||
| 5Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (MF = 1.0) | |||||
| 5.01 | b) Two coats | 1 | sqm | - | - |
| 6Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (Inall floors for internal wall & upto 6 m height for external wall) i) 3 mm thick (weighing 7.4 kg/Sq.m) | |||||
| 7Taking out P.V.C. Pipes with specials and valves including stacking the same within a lead of 30M as per instruction of the Engineer-in-Charge (Excavation, dewatering, earth filling etc. will be paid separately). | |||||
| 7.01 | a) Pipe upto 110 mm diameter and depth of trench upto 2 Metre. | - | mtr | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_2549543.xls
BOQ • 0.35 MB
Docs8_BDN.pdf
Tender Documents • 0.75 MB
Corri18_BDN.pdf
PDF • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].