Annual maintenance of Sri Venkateswara Swamy Temple Venkatapalem (V) Guntur (Dist) Amaravathi area for the year 2026-27

Supply of Best Teak wood scantlings up to 2 mts

Best Teak wood Planks any thickness

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum)

1. The owner should transport the JCB to the work spot at his own costs

2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour.

3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor.

4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges.

5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above.

6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.Ordinary soil-Manual means up to 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete..

Cement Concrete (1:2.5:5) -Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Construction of Brick Masonry in C.M (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

- do - in C.M (1:5) 20mm thick

- do - in C.M (1:5) 12mm thick

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 28.60mm ODPipe - SDR 13.5

Manufacture, Supply & delivery of HDPE pipes conforming to IS: 4984-1995 including transportation to anywhere in A.P, excluding all taxes and specials etc.complete.(supply up to 90 mm dia in coil & above 90 mm dia straight length) - 4.0 kg/sqcm(PE-80 Grade) - OD 40mm

Supply & fixing of 110 mm dia 3 M Single socket pipe PVC /SWR pipes & fittings ( as per ISI standards) 6kg/cm2 (Type-B)

supply and fixing 12.7mm NP bib tap (Long Body) Indian make heavy duty

Hire charges for Core drilling machine/Drilling Equipment including fuel charge, crew charge etc. complete as directed during execution complete.

Hire charges for Welding set including fuel charge, crew charge etc. complete as directed during execution complete.

Hire charges for Dozer (D-50) as directed during execution

Supply of labour for miscellaneous works as directed during execution

Mason 2nd Class

Carpenter 2nd Class

Painting with Ready mixed Synthetic Enamel paint in all shades -Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting with Matt finish ready mixed paint of approved make and colour including brushes to have an even shade including cost and conveyance of all materials as directed during execution.Two coats for old work

Painting Two coats with acrylic emulsion Gold paint exterior grade with ingredients of high durable gold pigment with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter. - for Old External walls

Construction of granular sub base (By Mix in Place Method) by providing well graded/Close graded material (Table 400-1) including conveyance, spreading in uniform layers with motor grader 110 HP, on prepared surface, mixing by mix in place method materials with rotavator at OMC including cost of watering and compacting with vibratory roller 8-10 tonnes capacity to achieve desired density etc., complete as per Technical specification vide clause No.401 of MORD/MORTH (4th Revision) and as directed by the Engineer-in-charge.

Filling of foundations and basement with quarry rubbish in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. - Double charged (with double layer pigment) / multi charged stain free full body (with homogeneous full body pigment for entire body thickness) porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Rewinding of 2.00 HP single-phase motor of 1400 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire 'E' class insulation material and testing etc. as required.

Installation, testing and Commissioning of the submersible pump set with all accessories as per the standard specifications for above 60mts and up to 120 mts including laying of G.I. Pipe duly providing the G.I. Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - 34.90mm ODPipe - SDR 13.5

Supply & fixing of 160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm

Polishing for old wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Supply of Brass name plate of different sizes of 20 guage brass sheet in different languages as directed during execution including wealher proof of Brass plates on both sides including Ar1 work as required for the letterir)g/Figuring etc., complete.

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Flooring with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black and regular colours in single piece and set over a base coat of CM (1:8) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of slabs including cost and conveyance of all materials like cement sand, water flooring stones etc., cost of base coat and all operational and labour charges such as mixing mortar, dressing, cutting, fixing in position, lift charges etc. complete for finished item of work for Treads (APSS No.701 & 707)

Supply and fixing of Glow Sign Radium stickers name plate / sign (or) instruction boards using 3mm thick Acrylic white sheet as back ground and glow sign radium sticker one layer for letters of different sizes as directed during execution including cost of 3mm thick Acrylic sheet, radium sticker and all labour charges for computer design and cutting, pasting and fixing the boards to walls.

Painting letters with Synthetic enamel paint of First quality including scaffolding wherever necessary etc., complete as directed during execution. -do- 2.5 cm size to 10.0 cm size

Manufacture, supply, & delivery of GI Pipe50mm GI ‘B’ Class Pipe size and transportation anywhere in Andhra Pradesh, excluding GST.

Supply and Fixing of Mild Steel Tubes & pipes of all diameters as per 1S-1161, including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills.Iron Doors, Windows including cost of welding rods, power charges, finishing smooth including painting the grils with Two coats with Synthetic enamel paint over a Primary Coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including fixing in position, cost and conveyance of all materials incidental charges etc., complete.