SUDA Funds

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, but excluding GST and Seigniorage charges etc., complete.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Plinth Beam.

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of Plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, but excluding GST and Seigniorage charges etc., complete.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Pedestals.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Plinth Beam.

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Flooring with Anti - skid Granite (Black) 18 to 22 mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and granite etc., complete, including labour charges for dressing of granite etc., complete for finished item of work,

Sand filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for finished item of work

Plain Cement Concrete M20 Nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402) For Pedestals

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of Red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Supply of 3 core 2.5 sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I

Supply and transportation of 200W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=100 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II.

Providing and laying high quality synthetic artificial sports turf suitable for Box Cricket play area, manufactured from UV-stabilized polyethylene monofilament yarn (as approved), tufted on cement concrete primary backing with secondary latex coating for strong binding and durability. including all necessary material & labour to complete finished item of work as per the directions of Engineer In charge but excluding GST.

Manufacturing,Transporting and installation of MULTIPLAY SYSTEM of size 20 X 12 X 14 ft.Specification : Pipe : Structure pipe made of GI . B class conforming to IS 1239 latest pipe 4” 42 OD and 32 OD of 2 to 3 mm thickness Material of stair , railing ,bridge : structure made of 32 OD AND 25 mm GI pipe of 2 to 3 mm thickness. (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 70 to 80 microns plastic part : LLDPE (roto platic) of 6 mm thickness with UV 6 resistance. pole Cap – made of HDPE Paint – powder coated ( 80 to 90 micron) finish including cost and conveyance of all accessories but excluding GST

Manufacturing,Transporting and installation of CIRCULER Swing of Size : 8 X 2.5 X 4 ft having Structure pipe made of GI . B class conforming to IS 1239 latest pipe 2” 42 OD and 32 OD of 2 to 3 mm thickness.Material of the Swing - MS Structure. Painting with powder coated ( 80 to 90 micron) Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of 4 seater Merry go round of dia 1.20 mtrs having Structure pipe made of Appollo Brand Gi pipe 2 inches 42 OD and 32 OD of 2 to 3 mm thickness.Arm structure made of 25 OD pipe of 2 to 3 mm thickness.Paint – powder coated ( 80 to 90 micron) finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Four seater SEE Saw Structure pipe made of Appollo Brand GI pipe 2/3 inch & 42 OD and 32 OD of 2 to 3 mm thickness,Arm structure made of 25 OD pipe of 2 to 3 mm thickness,Seat made up of LLDPE 4 to 5 mm thickness, powder coated 80 to 90 micron finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Monkey Bar Climber of Size 7 X 2.5 X 8 ft Structure pipe made of GI . B class conforming to IS 1239 latest pipe 2”, Handrill 48 OD / 32 OD of 2 to 3 mm thickness,Pole cap made up of FRP /HDPE,powder coated 80 to 90 micron finish iMake : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Arc Swing of Size 10 X 5 X 8 ft,Structure pipe made of Appollo Brand B class conforming to IS 1239 latest pipe 2 inches 42 OD and 32 OD of 2 to 3 mm thickness,Swing of GI chain with rubber coating and Rubber/FRP/LLDPE swing seat,powder coated 80 to 90 micron finishMake : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Horse Spring Rider of 3 to 4 mm base plate,Coir spring having 10 mm thickness,Seat made of LLDEP Horse/elephant,powder coated 80 to 90 micron finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Providing, fabricating, supplying and fixing complete Polycarbonate net barricading system for Box Cricket including structural support framework, sports safety net, as per approved design and site requirements. The work shall include all materials, labour, fixtures, fittings, and accessories required for complete installation excluding GST.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Pedestal

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Flooring with Anti - skid Granite (Black) 18 to 22 mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and granite etc., complete, including labour charges for dressing of granite etc., complete for finished item of work,

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Providing and fixing 18 mm thick Bison Panel / Cement Bonded Particle Board conforming to IS: 14276, of approved make and quality, fixed on MS framework, including cutting, drilling, edge finishing, screws, washers, necessary supports, and all incidental charges complete, as directed by the Engineer-in-Charge, but excluding GST.

Providing & fixing of Architectural mangalore tiles of sizes 135 X 210 mm of 20 mm thickness as per approved pattern laid over cement concrete bead of M20 grade of 50mm thick using chicken mesh fixed on already laid cement bonded particle board etc. including cost and conveyance of all materials , all labour charges etc, complete but excluding cost of cement concrete and GST for finished item of work as directed by the engineer in-charge of the work.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering. for Plinth Beam

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Foundation and erection charges with special T&P, for 3.6Mtrs/7.5 Mtrs long Octagonal/ Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.35Mtr x 0.35Mtrs x 0.9 Mtr size M20 cc work vibrated concreting mixing with necessary steel (7.9kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete as directed by the engineer incharge.

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II Makes : As per list of recommended brands. Makes:DURA LINE (Dura Guard) / Precision /CPE or its equivalent make including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.3.1 of SSR 2025-26

Supply , transportation and fixing of 10 Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Art with No.10 SWG G.I wire for earth connections for the cables including cost and conveyance of all materials and labour charges etc., complete. as directed by Engineer incharge

Supply , transportation and fixing of 16 Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Art with No.10 SWG G.I wire for earth connections for the cables including cost and conveyance of all materials and labour charges etc., complete. as directed by Engineer incharge

Manufacture & Supply of DECORATIVE POLE CASISTA Technical Specifications 1. Structural & Pole Details Height: 4 Meters Material: High-quality Galvanized Iron (GI) for superior corrosion resistance. Design Feature: Custom Middle Laser Cutting Design for a modern, decorative aesthetic. Pipe Diameters: Lower Section (L1): 114mm Outer Diameter(OD) GI Pipe Upper Section (L2): 48 mm Outer Diameter (OD) GI Pipe.Surface Finish: Premium PP Powder Coated for long-lasting weather protection and a sleek finish.Manufacturer: Leniox Make/Jindal/Apollo/Utkarsh 2.Foundation & Installation Base Plate: 200X200X8 mm thickness for rigid structural stability. Foundation Kit: Includes a 450×12 mm J Type foundation bolt kit for secure anchoring. 3. Lighting & Electrical Specifications Luminaire Type: street Light Lens Model Power Consumption: 50W Commercial & Logistics Scope .Custom Fabrication Manufactured under strict quality control guidelines using high-grade, certified Galvanized Iron (GI) raw materials.Precision welding, structural reinforcement,and professional PP powder coating are completed entirely in-house to ensure seamless finish and structural conformity before dispatch. Warranty: 2-Year comprehensive warranty on the LED lighting system.This rate includes cost and conveyance of materials etc. complete as directed by engineer in charge excluding GST

The sign boards of (ENTRANCE) dimensions (3.6 X 0.35 M) made of 2 mm acrylic letters, 10 mm WPC sheets and the body made with 1 mm aluminium strip embossed with white color powder coated with Admax LEDs and Rain proof SMPS of Onix make installed as per design approved by the engineer in charge. The work shall include all materials, labour, fixtures, fittings, and accessories required for complete installation.excluding GST.

Supply of 3 core 2.5 sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I

Supply and fixing of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 12KW of Three phase load with necessary clamping arrangements. Make: Swadeep Nature Switch / Light Mate /GL/Bajaj and all labour and transportation charges etc complete as directed by engineer incharge

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp.

Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply and transportation of 400W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size with makes Makes:Dowels/Jainson/Comet including all as directed by Engineer incharge.

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 9 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands

Cutting open C.C Road surface with concrete saw cutter and removal with Breaker.

Plain Cement Concrete M20 Nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402)

Supply of Nominal-Bore G.I. Pipe 40mm Medium grade including all labour and other charges etc complete as directed by Engineer Incharge

Supply and Transportation of 1.00 HP 10 Stage, 5star rated süs motor pumpset, confirming to 15 8034 and motor confirming to 15 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10%, Single Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar/Crompton/Texmo/CRI/KSB/Lubi/ PSG/AryenVarsha.including cost and conveyance of all materials to work spot and all labour charges etc. complete as directed by the site engineer.

Supply and delivery of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes: Finolex/RR kabel / Havells/KEI/Polycab/Gloster/ Goldmedal /GM/Finecab/Fortune Arrt/Anchor/Million including cost of material and conveyacne to work spot etc complete as directed by the departmental authoirities.

Supply and fixing of MS Clamps of approved Standard make including cost and conveyance of all materials to work spot and all labour charges etc, complete as directed by the site engineer.

Fabrication, transportation and supply of suitable size panel board for three phase submersible motor up to 1.5HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB,on/off switch including supply and fixing of DOL starter of make C&S / LTLK/Seimens/BCH / KSP (Karunya) / Crompton.including cost and conveyance all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Manufacture, Supply, & Delivery of 40 mm HDPE Pipes are conforming to IS 14333 - 2000 for Discharge pipe of Motor.

Manufacture, Supply, & Delivery of OD 50 mm HDPE Pipes 10 Kg/Sqcm are conforming to IS 14333 - 2000 for using drinking water including all charges of specials Bends,Tees and End Caps excluding all taxes

Labour charges for laying, fixing and commissioning the HDPE pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Supply & Fixing of GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete(MM)

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type For 50 MM

Supplying & fixing Gunmetal (GM) Horizontal Check (Nonreturn) Valve as per IS-778 I-class heavy duty - 40 mm NBSize

Manufacture, Supply, & Delivery of 50 mm MS FLANGES HDPE (PE –100Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P.MAT-07489

Cost and Supply & Fixing of GI UNION of size 40mm MAT-01832

Cost and Supply & Fixing of Tap Connection including all connections such as saddle,GI Nipple,NRV Valve & long neck Bib cock including conveyance of all materials.

Eatery and Parking Zone

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, but excluding GST and Seigniorage charges etc., complete.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Plinth Beam.

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of Plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Children Play Zone

(i) Civil Works

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80-100 KN to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 MORD including contractors profit & Over head charges, but excluding GST and Seigniorage charges etc., complete.

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Pedestals.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Plinth Beam.

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Flooring with Anti - skid Granite (Black) 18 to 22 mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and granite etc., complete, including labour charges for dressing of granite etc., complete for finished item of work,

Sand filling in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) for finished item of work

Plain Cement Concrete M20 Nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402) For Pedestals

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of Red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

(ii)Electrical Works

Supply of 3 core 2.5 sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I

Supply and transportation of 200W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=100 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II.

(iii)Sports & Playing Items

Providing and laying high quality synthetic artificial sports turf suitable for Box Cricket play area, manufactured from UV-stabilized polyethylene monofilament yarn (as approved), tufted on cement concrete primary backing with secondary latex coating for strong binding and durability. including all necessary material & labour to complete finished item of work as per the directions of Engineer In charge but excluding GST.

Manufacturing,Transporting and installation of MULTIPLAY SYSTEM of size 20 X 12 X 14 ft.Specification : Pipe : Structure pipe made of GI . B class conforming to IS 1239 latest pipe 4” 42 OD and 32 OD of 2 to 3 mm thickness Material of stair , railing ,bridge : structure made of 32 OD AND 25 mm GI pipe of 2 to 3 mm thickness. (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 70 to 80 microns plastic part : LLDPE (roto platic) of 6 mm thickness with UV 6 resistance. pole Cap – made of HDPE Paint – powder coated ( 80 to 90 micron) finish including cost and conveyance of all accessories but excluding GST

Manufacturing,Transporting and installation of CIRCULER Swing of Size : 8 X 2.5 X 4 ft having Structure pipe made of GI . B class conforming to IS 1239 latest pipe 2” 42 OD and 32 OD of 2 to 3 mm thickness.Material of the Swing - MS Structure. Painting with powder coated ( 80 to 90 micron) Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of 4 seater Merry go round of dia 1.20 mtrs having Structure pipe made of Appollo Brand Gi pipe 2 inches 42 OD and 32 OD of 2 to 3 mm thickness.Arm structure made of 25 OD pipe of 2 to 3 mm thickness.Paint – powder coated ( 80 to 90 micron) finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Four seater SEE Saw Structure pipe made of Appollo Brand GI pipe 2/3 inch & 42 OD and 32 OD of 2 to 3 mm thickness,Arm structure made of 25 OD pipe of 2 to 3 mm thickness,Seat made up of LLDPE 4 to 5 mm thickness, powder coated 80 to 90 micron finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Monkey Bar Climber of Size 7 X 2.5 X 8 ft Structure pipe made of GI . B class conforming to IS 1239 latest pipe 2”, Handrill 48 OD / 32 OD of 2 to 3 mm thickness,Pole cap made up of FRP /HDPE,powder coated 80 to 90 micron finish iMake : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Arc Swing of Size 10 X 5 X 8 ft,Structure pipe made of Appollo Brand B class conforming to IS 1239 latest pipe 2 inches 42 OD and 32 OD of 2 to 3 mm thickness,Swing of GI chain with rubber coating and Rubber/FRP/LLDPE swing seat,powder coated 80 to 90 micron finishMake : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Manufacturing,Transporting and installation of Horse Spring Rider of 3 to 4 mm base plate,Coir spring having 10 mm thickness,Seat made of LLDEP Horse/elephant,powder coated 80 to 90 micron finish Make : Sundek Sports/Koochie Global/Trado Play/ Arihant/Vinex Enterprises which follow Indan standards of safety IS 6869 & IS 1239.This rate including all labour cahrges and cost and conveyance of all accessories & fixing charges etc,complete as directed by the Engineer in charge but excluding GST

Providing, fabricating, supplying and fixing complete Polycarbonate net barricading system for Box Cricket including structural support framework, sports safety net, as per approved design and site requirements. The work shall include all materials, labour, fixtures, fittings, and accessories required for complete installation excluding GST.

Senior Citizen Sitting Zone

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering for Pedestal

Masonry work in CM (1:8) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290 mm x 225 mm x 140 mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504) for Basement

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Supply and laying of interlocking bricks of approved shape, thickness and size, supply of precast concrete blocks for paving of M-30 grade and thickness not less than 50mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Flooring with Anti - skid Granite (Black) 18 to 22 mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and granite etc., complete, including labour charges for dressing of granite etc., complete for finished item of work,

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Providing and fixing 18 mm thick Bison Panel / Cement Bonded Particle Board conforming to IS: 14276, of approved make and quality, fixed on MS framework, including cutting, drilling, edge finishing, screws, washers, necessary supports, and all incidental charges complete, as directed by the Engineer-in-Charge, but excluding GST.

Providing & fixing of Architectural mangalore tiles of sizes 135 X 210 mm of 20 mm thickness as per approved pattern laid over cement concrete bead of M20 grade of 50mm thick using chicken mesh fixed on already laid cement bonded particle board etc. including cost and conveyance of all materials , all labour charges etc, complete but excluding cost of cement concrete and GST for finished item of work as directed by the engineer in-charge of the work.

All Round Protection Fencing for Pond

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles unit 1.00 Rmt

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH /by manual means

Filling Stone dust in foundation / basement from approved Quarry / available sources including all operational, incidenal, labour charges, Hire Charges of T&P etc., complete in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work . (APSS NO. 309 & 310)

Plain Cement concrete (1:4:8) using 40 mm HBG Metal from approved quarry including cost and conveyance of allmaterials like Cement, Sand, coarse aggregate, water etc., to site , complete for finished item of work for Foundations and flooring bed (APSS No.402)(CSSR)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for Piles

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering. for Plinth Beam

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials, all labour charges, curing charges and scaffolding charges etc complete for finished item of work.

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912)

Supplying and fixing of MS Iron grills using MS angles of different sizes for outer frame, including cost and conveyance of all materials ,fabrication charges and all other labour charges etc., complete.

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of red oxide primer making three coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powderedd materials, including c/c of all materials, site and other taxes, all operational, incidental and labour charges etc., complete for finished item of work. (APSS No.1201, 1207 & 1212)(CSSR)

Electrification & Water Supply Works

(i) Electrical Works

Foundation and erection charges with special T&P, for 3.6Mtrs/7.5 Mtrs long Octagonal/ Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.35Mtr x 0.35Mtrs x 0.9 Mtr size M20 cc work vibrated concreting mixing with necessary steel (7.9kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc., complete as directed by the engineer incharge.

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II Makes : As per list of recommended brands. Makes:DURA LINE (Dura Guard) / Precision /CPE or its equivalent make including cost of material and conveyance to work spot etc complete as directed by the departmental authorities. ELEC-4.3.1 of SSR 2025-26

Supply , transportation and fixing of 10 Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Art with No.10 SWG G.I wire for earth connections for the cables including cost and conveyance of all materials and labour charges etc., complete. as directed by Engineer incharge

Supply , transportation and fixing of 16 Sq mm X 4 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Makes: Torent / Universal / Unicab / Havells / Finecab / KEI / Gloster/ Polycab /RR Kabel/ Fortune Art with No.10 SWG G.I wire for earth connections for the cables including cost and conveyance of all materials and labour charges etc., complete. as directed by Engineer incharge

Manufacture & Supply of DECORATIVE POLE CASISTA Technical Specifications 1. Structural & Pole Details Height: 4 Meters Material: High-quality Galvanized Iron (GI) for superior corrosion resistance. Design Feature: Custom Middle Laser Cutting Design for a modern, decorative aesthetic. Pipe Diameters: Lower Section (L1): 114mm Outer Diameter(OD) GI Pipe Upper Section (L2): 48 mm Outer Diameter (OD) GI Pipe.Surface Finish: Premium PP Powder Coated for long-lasting weather protection and a sleek finish.Manufacturer: Leniox Make/Jindal/Apollo/Utkarsh 2.Foundation & Installation Base Plate: 200X200X8 mm thickness for rigid structural stability. Foundation Kit: Includes a 450×12 mm J Type foundation bolt kit for secure anchoring. 3. Lighting & Electrical Specifications Luminaire Type: street Light Lens Model Power Consumption: 50W Commercial & Logistics Scope .Custom Fabrication Manufactured under strict quality control guidelines using high-grade, certified Galvanized Iron (GI) raw materials.Precision welding, structural reinforcement,and professional PP powder coating are completed entirely in-house to ensure seamless finish and structural conformity before dispatch. Warranty: 2-Year comprehensive warranty on the LED lighting system.This rate includes cost and conveyance of materials etc. complete as directed by engineer in charge excluding GST

The sign boards of (ENTRANCE) dimensions (3.6 X 0.35 M) made of 2 mm acrylic letters, 10 mm WPC sheets and the body made with 1 mm aluminium strip embossed with white color powder coated with Admax LEDs and Rain proof SMPS of Onix make installed as per design approved by the engineer in charge. The work shall include all materials, labour, fixtures, fittings, and accessories required for complete installation.excluding GST.

Supply of 3 core 2.5 sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990. Makes: As per list of recommended brands as category I

Supply and fixing of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 12KW of Three phase load with necessary clamping arrangements. Make: Swadeep Nature Switch / Light Mate /GL/Bajaj and all labour and transportation charges etc complete as directed by engineer incharge

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp.

Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply and transportation of 400W LED Flood light Luminaire made of pressure diecast aluminum housing with powder coated, having protective toughened glass, supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LEDs, with a System Efficacy >=120 lumens/watt and junction temperature < 70°C, with ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-5), IK05, driver surge protection 4KV, In-house additional surge protection ≥ 10KV with wide/ narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size with makes Makes:Dowels/Jainson/Comet including all as directed by Engineer incharge.

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 9 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands

Cutting open C.C Road surface with concrete saw cutter and removal with Breaker.

Plain Cement Concrete M20 Nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402)

Supply of Nominal-Bore G.I. Pipe 40mm Medium grade including all labour and other charges etc complete as directed by Engineer Incharge

(ii) Water Supply Works

Supply and Transportation of 1.00 HP 10 Stage, 5star rated süs motor pumpset, confirming to 15 8034 and motor confirming to 15 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10%, Single Phase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar/Crompton/Texmo/CRI/KSB/Lubi/ PSG/AryenVarsha.including cost and conveyance of all materials to work spot and all labour charges etc. complete as directed by the site engineer.

Supply and delivery of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes: Finolex/RR kabel / Havells/KEI/Polycab/Gloster/ Goldmedal /GM/Finecab/Fortune Arrt/Anchor/Million including cost of material and conveyacne to work spot etc complete as directed by the departmental authoirities.

Supply and fixing of MS Clamps of approved Standard make including cost and conveyance of all materials to work spot and all labour charges etc, complete as directed by the site engineer.

Fabrication, transportation and supply of suitable size panel board for three phase submersible motor up to 1.5HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB,on/off switch including supply and fixing of DOL starter of make C&S / LTLK/Seimens/BCH / KSP (Karunya) / Crompton.including cost and conveyance all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Manufacture, Supply, & Delivery of 40 mm HDPE Pipes are conforming to IS 14333 - 2000 for Discharge pipe of Motor.

Manufacture, Supply, & Delivery of OD 50 mm HDPE Pipes 10 Kg/Sqcm are conforming to IS 14333 - 2000 for using drinking water including all charges of specials Bends,Tees and End Caps excluding all taxes

Labour charges for laying, fixing and commissioning the HDPE pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice

Supply & Fixing of GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete(MM)

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type For 50 MM

Supplying & fixing Gunmetal (GM) Horizontal Check (Nonreturn) Valve as per IS-778 I-class heavy duty - 40 mm NBSize

Manufacture, Supply, & Delivery of 50 mm MS FLANGES HDPE (PE –100Grade) fittings conforming to IS 4984 - 2016 including transportation to anywhere in A.P.MAT-07489

Cost and Supply & Fixing of GI UNION of size 40mm MAT-01832

Cost and Supply & Fixing of Tap Connection including all connections such as saddle,GI Nipple,NRV Valve & long neck Bib cock including conveyance of all materials.

(No.of items 97 ) only