REPAIR/REPLACEMENT OF PLYWOOD IN CHARPOY AND BED HARD STEEL REPLACEMENT OF CUSHION FOR SOFA SET CHAIR DINING CUSHIONED CHAIR WRITING ETC AT FURNITURE YARD BADDOWAL UNDER GE LUDHIANA

Amount

TABLE OFFICE CLERK STEEL S&F for the following parts of Table office clerk including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-84M, FD-1004

Lock 6 lever of brass with two keys

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Paint with two coats on table all as specified & directed by Engineer-in- charge.

TABLE OFFICE OFFICER STEEL S&F for the following parts of Table office officer including taking out the old parts, cutting/welding turning, drilling bending to required shape etc complete all as specified & directed by Engineer-in- charge. FD-84M, FD-1003

Mild steel lock 65mm size with key in duplicate

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

Paint with two coats on table all as specified & directed by Engineer-in- charge.

TABLE 900MMx600MMX760MM STEEL WITH OR WITHOUT DRAWER: S&F in replacement Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge. FD-1007 & 1008

Paint with two coats on table all as specified & directed by Engineer-in- charge.

TABLE 900MMx900MMx760MM STEEL S&F in replacement Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge. FD-1009

Paint with two coats on table all as specified & directed by Engineer-in- charge.

TABLE 900MM x 600MM x 760MM WITH & WITHOUT DRAWERS M&L for providing following parts of table 900mm x 600mm x 760mm dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. Drg No: FD-224, 283 & 284.

Table top 900x600mm made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick shall be provided etc complete.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Drawer made out of 12mm thick commercial Ply Wood with teak shade with 25mm dia knob complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC Shoe on the leg of chiar all as specified & directed by Engineer-in- charge.

TABLE DINNING FOR 4 PERSONS M&L for providing following parts of table dinning for four persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. FD/MAP-II/03

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

PVC Shoe on the leg of Table

REPLACEMENT OF PLYWOOD FOR CHARPOY GI PIPE PLYTOP: M&L for removal of unsv Plywood from charpoy GI pipe and fixing new 12mm thick Plywood BWR grade with 75mm long 6mm dia fully threaded nuts and bolts with washers on both side 3 No in each long rail and 2 No in each short rail including 3 No iron strips (900x25x3mm) between two rails below Plywood top and including tightening of frame of charpoy and rounding off the corners of plywood complete all as specified & directed by Engr-in-Charge. Make:- Orchid / century / Greenply. Drg No FD-220

S&F in replacement long rail made out of 32mm dia medium grade galvanised pipe including (welding / threading ) as per existing pattern complete all as specified & directed by Engr-in-Charge.

M&L for removal of unsv short rail from frame of Charpoy GI pipe, Fixing of short rail made out of unserviceable long rail 7.01 above after cutting & threading both ends to required size to make two short rails complete all as specified and directed by Engr-in-Charge

M&L for removal of unsv leg from frame of Charpoy GI Pipe . Fixing leg made out of unserviceable short rail 7.02 above after cutting & threading both ends to required size to make two leg complete all as specified and directed by Engr-in-Charge

S & F for three way GI elbow 32mm diasuitable for charpoy GI pipe all as specified and directed by Engr-in-Charge

S & F for check nut GI 32mm diasuitable for charpoy GI pipe all as specified and directed by Engr-in-Charge

Replacement of ply Charpoy IP Hard Top and fixing new 12mm thick plywood BWR grade with 50mm long 4mm dia fully threaded nuts and bolts with washers on both side 2 No in each short rail including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. make:- Orchid / century / Greenply. Drg No FD/MAP-II/01

M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from charpoy IP Hard Top complete all as spfd and as directed by Engr-in-Charge .

S&F of PVC seat and back of chair verandah all shown on the drawing etc complete all as specified and as directed by Engr-in-Charge. Drg No FD/MAP-II/06

S&F in replacement PVC seat of chair dining with 20mm steel screw all shown on the drawing including French polishing with one or more coats as required etc complete all as specified and directed by Engineer-in-Charge. Drg No FD/MAP-II/05

LOCKER BED SIDE STEEL: S&F in replacement of the following components including cutting / welding turning drilling bending to required shape as specified and shown on drg. FD-1029

Leg made out of PBI sheet 1.00mm thick

Metal steel pressed handle oval type of size 100mm.

Mild steel butt hinges 75mm long.

Hanging rod of aluminium pipe 20mm dia as per existing length.

Hasp and staple 100mm safty type aluminium anodized.

Paint with two coats on Locker all as specified & directed by Engr-in- Charge. Make of Enamel: Apcolite of Asian.

REPAIR TO SOFA SETS 4/5 SEATED Drg No FD-373

Supply and fixing for front leg made of Ist class hard teak wood duly smoothed size and shape shown on drawing incuding removing /taking off old unsv front leg complete all as spfd and as directed by Engr-in-Charge

Supply and fixing for Rear leg made of Ist class hard teak wood duly smoothed size and shape shown on drawing incuding removing /taking off old unsv Rear leg complete all as spfd and as directed by Engr-in-Charge

Supply and fixing for Arms made of Ist class hard teak wood duly smoothed size and shape shown on drawing incuding removing /taking off old unsv Arms complete all as spfd and as directed by Engr-in-Charge

Supply for Foam cushion of 32 density of size 21" x22" x4" Foam Cushion covered with superior quality tapestry cloth as approved by the GE including removal of old unsv cushion and tapestry cloth of Sofa Sets Make of Cushion : Sleep Well/ Curl-On.

PK ENTERPRISES

JAY ANN CONSTRUCTION COMPANY

M/s Rajesh Kumar Jain