Thrissur corporation KKY Zonal Dn.43 Proj.No471/25 Chilldren39 Park at Naalu cent colony.

Amount

DAR CIVIL

51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

OD158941/2024-2025:Providing and laying 60mm thick factory made cement concrete inter locking paver block of M30 grade made by block making machine with strong vibratory compaction of approved sizedesign and shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse aggregate filling the joints with fine sand etc.all complete as per the direction of engineer-in-charge.

4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

4.4.1:Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

OD160637/2024-2025: Providing&fixing precoated galvanized iron profile sheets[size,shape and pitch of corrugation as approved by Engineer in charge]0.35mm[+0.05%]total coated thickness with zinc coating 120gms per sqm as per IS;277,IN 240mpa steel grade ,5-7microns epoxy primer on both side.of the sheet and polystertop coat 15-18microns.Sheet should have protective guard filmof 25 microns minimum to avoid scratches during transportatioon & should be supplied in single length up to 12m or as desired by Engineer -in-charge.The sheet shall be fixed using self drilling /self tapping screws of size[5.5x55mm] WITH epdm sealcomplete upto any pitch in horizontal/verticalor curved surfaces,excluding the cost of purlins ,rafters and trusses &including cutting to size and shape whereever required.

OD160643/2024-2025:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mm*5mm flat supporters at 1m interval etc.complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

JOHNSON A V (BID ID -1974138)

Bidder Name

JEESON K P

JOHNSON A V