REPAIR AND MAINT OF INTERNAL ELECTRIC WIRING LIGHT FITTINGS DBS AND CONNECTED ITEMS IN MD OTM ACCN IN INSIDE AND OUTSIDE DEPOT UNDER GE BANAR

Amount

Taking down copper /alunimium point wiring (light,Fan, Socket, power etc) complete including fixture and fittings such as switches, ceiling roses, pendants,regulator, socket, light fitting of any wattage etc removing material credited to contractor respectively. Item shall be issued on proper gate pass. Including making good disturbed surfaces of walls, floor etc complete all as specified.

Taking down old unserviceable/worn out sub main wiring/service wire of any type and size complete all as specified.

Taking down Main switches/DBs/Metal clade socket of any make and type including teakwood board, MCBs/MCCBs etc complete and making good the disturbed surfaces including colour wash complete all as specified.

M&L for point wiring complete with 1.5 sqmm single core multistranded copper conductor PVC(FRLS) insulated and unsheathed cable in and including PVC casing caping fixed on wall,surface,ceiling etc including 3mm thick, laminated Hylen sheet (white colour) for mounting switches, socket, regulator etc on including sunken type pressed steel terminal boxes screw with washer for fixing with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly for the following :- (a) One light point controlled by one switch complete all as specified.

All item as per Ser No 4.00 above but one fan point controlled by one switch complete all as specified.

All item as per Ser No 4.00 above but one 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified.

All item as per Ser No 4.00 above but one 3 pin 5 amps socket outlet point on same board with other switches complete all as specified.

All item as per Ser No 4.00 above but one bell/buzer point controlled by one bell push complete all as specified.

All item as per Ser No 4.00 above but one light point controlled by two 2-way switches complete all as specified.

All item as per Ser No 4.00 above but point wiring with 2.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed calbe 1100 volts grade for 15 Amp socket outlet on independent board complete all as specified.

All item as per Ser No 4.00 above but point wiring with 4.0 sqmm single core multistranded copper conductor PVC(FRLS) insulated and unsheathed cable 1100v grade fixed on and including PVC casing caping fixed on wall,surfaces,ceiling etc for with 4.0sqmm single core multistandared copper conductor FRLS PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduit heavy duty ISI marked including all accessories fixed on wall,surface,ceiling etc including 3mm thick, laminated Hylen sheet for mounting switches, socket, regulator etc on including wooden/PVC terminal boxes screw with washer for fixing with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth and earth dolly for the following :- (a) One light point controlled by one, way swtich complete all as specified.

All item as per Ser No 12.00 above but one fan point controlled by one, One-way switch complete all as specified.

All item as per Ser No 12.00 above but one 5 pin 5 Amp Socket outlet point on same board with other switches including earth wire complete all as specified.

All item as per Ser No 12.00 above but one 5 pin 5Amp Socket outlet point on independent board complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost. (a) One light point controlled by one, One-way switch complete all as specified.

All item as per Ser No 16.00 above but one fan point controlled by one, One-way switch complete all as specified.

All item as per Ser No 16.00 above but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified.

All item as per Ser No 16.00 above but one 5 pin 5Amp Socket outlet point on independent board complete all as specified.

All item as per Ser No 16.00 above but one bell/buzer point controlled by one bell push complete all as specified.

AAll item as per Ser No 16.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board complete all as specified. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

All item as per Ser No 16.00 above but with 4 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 4 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

M&L for point wiring complete with 1.5sqmm single core multistranded copper conductor PVC (FRLS) insulated and unsheathed cable in existing PVC conduit or casing caping fixed on wall surface, ceiling etc including 3mm thick laminated hylen sheet for mounting switches sockets regulator etc on existing sunk cast iron terminal boxes, screw with washer for fixing with 1.5 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable as earth continiuty conductor to common earth and earth dolly for the following. (a) One light point controlled by one, One-way switch complete all as specified. Note: The junction box should be concealed in wall and making good to match the existing surface.

All item as per Ser No 23.00 above but one fan point controlled by one, One-way switch complete all as specified.

All item as per Ser No 23.00 above but one 5 pin 5Amp Socket outlet point on same board with other switches including earth wire complete all as specified.

All item as per Ser No 23.00 above but one 5 pin 5Amp Socket outlet point on independent board complete all as specified.

All item as per Ser No 23.00 above but one bell/buzer point controlled by one bell push complete all as specified.

All item as per Ser No 23.00 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

All item as per Ser No 23.00 above but with 4 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 4 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.

Supply and fixing switch Piano flush type 5 Amp single pole complete all as specified.

Supply and fixing multipurpose socket outlet 2 in 1, 3 pin 5 amps flush type controlled by one switch complete all as specified.

Supply and fixing switch Piano flush type 15 Amp single pole with neon indicator complete all as specified.

S & F Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type controlled by one switch complete all as specified.

S & F for Bell push, flush type, 5 amp complete all as specified.

Supply and fixing ceiling rose surface backelite 65x50mm three terminals complete all as specified.

Supply and fixing fan regulator electronic type for ceiling fan 1200 mm sweep complete all as specified.

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S & F in replacement 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified.

S & F modular switch 6A 1 module one - way 230V white ivory finish complete all as specified.

S & F modular switch 16A 1 module one - way 230V white ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S&F in replacement bell electrical ding dong including hard PVC board ISI marked complete all as specified.

S & F Modular Bell push 6A 1 module complete all as specified.

S & F in replacement Modular type stepped electronic fan regulator 2 module complete all as specified.

Supply and fixing in replacement white cover plate with frame, 2 module complete all as specified.

All item as per Ser No 46.00 above but 3 module complete all as specified.

All item as per Ser No 46.00 above but 4 module complete all as specified.

All item as per Ser No 46.00 above but 6 module complete all as specified.

All item as per Ser No 46.00 above but 8 module complete all as specified.

M & L in replacement for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including PVC conduit and accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L in replacement for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC concealed conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

S&F in replacement MCB TPN DB 4 way double door with 200 amps rated busbar 415 V, all wire connected MCB with help of lugs, all wire connected with meter is covered with flexible conduit and DB will be fixed concealed/surface with wall neatly etc complete all as specified.

S&F in replacement MCB SPN DB 4 way double door with 200 amps rated busbar 240 V,all wire connected MCB with help of lugs, all wire connected with meter is covered with flexible conduit and DB will be fixed concealed/surface with wall neatly etc complete all as specified.

S&F in replacement MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V,all wire connected MCB with help of lugs, all wire connected with meter is covered with flexible conduit and DB will be fixed concealed/surface with wall neatly etc complete all as specified.

Taking down old and Supply and fix in replacement 4 way VTPN DB, 415 V, double door 100 amps rated bus bar, including 100 Amps 4 pole, 16 KA MCCB, making good disturbed surfaces of walls including plaster cutting of wall etc complete all as specified.

S & F in replacement for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F in replacement for MCB double pole of rated capacity 32/40 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement for MCB four pole of rated capacity 40 to 100 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement of decorative LED light fitting (Warm white/Day white) 20 watts 4 feet long made up of linear aluminium extruded channel powder coated with opaque diffuser for glare free light complete all accessories internally pre wired and necessary mounting arrangements complete all as specified.

S & F in replacement of decorative LED light fitting 10 watts (2 Feet long) made up of linear aluminium extruded channel powder coated with opaque diffuser for glare free light complete all accessories internally pre wired and necessary mounting arrangements complete all as specified.

S & F in replacement of round recessed mounted AL die - cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15W LED downlighter of white/neutral white color temperature etc. prewired and all accessories complete all as specified. Note- POP ceiling cutting work is including in quoted rates.

S & F in replacement Recess-mounting back-lit LED 2X2 36Watt tile in CRCA housing with full-opal diffuser suitable for Armstrong/Grid ceilings with revolutionary Flicker controlled technology to reduce harmful invisible flicker present in LED lighting sources complete all as specified. Note- POP ceiling cutting work is including in quoted rates.

S & F in relacement LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 Protection and with aluminium bracket including taking down of old unservicable security light complete all as specified.

M&L in replacement of bracket made of GI pipe 40 mm dia light grade bend to shape not less than 1.5 mtr with 02 Nos of MS clamps fabricated out of MS flat of size 25x4mm including nut, bolts, washers etc complete all as specified.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate Nos 03 in SSR Part I connected to earthing test point all as specified or indicated including testing on completion complete all as specified.

S & F in replacement metal clad pin top/plug ( 2 P + 1 E) complete all as specified.

S & F in replacement PVC Pin top for 5A socket complete all as specified.

S & F in replacement PVC Pin top for 15A socket complete all as specified.

S & F in replacement switch piano flush type 6A (2) Two - way 230V finish complete all as specified.

M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 100mmx100mmx50mm deep complete all as specified.

M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 175mmx100mmx50mm deep complete all as specified.

M&L for replacement PVC rectangular block for mounting switches,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mmx200mmx50mm deep complete all as specified.

M & L for replacement metal sunken box for mounting 5A/15A switch and socket complete all as specified.

M & L for replacement metal sunken box for mounting 5A/15A switch and socket in combination of two complete all as specified.

S&F in repair of Plastic laminated sheet 4" X 4" , 3mm thick fixed with screws complete all as specified.

S&F in repair of Plastic laminated sheet 7" X 4" , 3mm thick fixed with screws complete all as specified.

S&F in repair of Plastic laminated sheet 11" X 7" , 3mm thick fixed with screws complete all as specified.

VARDHMAN SALES CORPORATION (BID ID -3358619)

M/s Vishaka Enterprises (BID ID -3362235)