SPECIAL REPAIRS TO OFFICERS BUILDING NO VIII (04 TYPE IV QTRS) AND BUILDING NO IX (01 TYPE V QTR) AT MIL ROAD, KANNUR UNDER AGE (I) CANNANORE

Amount

Dismantling MP roofing tiles or similar tiles in roofing complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size incl tilting fillets complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L Second class HW scantlings, clean sawn as in rafters, purlins etc as directed by Eng-in-charge without finish complete all as specified and as directed.

All as per item No. 5 here-in-before but except timber complete all as specified and as directed

M&L Steel work rectangular/ tubular trusses as in purlins etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated flashing sheets 0.5mm thickness, colour coated with self tapping screws, hexagonal head with neoprene and EPDM washers all as per manufacturers instructions complete all as specified and as directed.

S&F PVC SWR pipe 200 mm bore as in half round gutters including drop ends/stop end suitable for 200 mm half round valley gutter and fixing with MS/PVC clamps suitable for steel sheet roof complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials new of any description and girth and treating with two coats of creosote oil complete all as specified and as directed.

All as per item No. 12 here-in-before but one coat of creosote oil over old wooden surfaces complete all as specified and as directed.

M&L Preparing surfaces of new steel of any description over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length ) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre suspended with hangers 6 mm dia (up to 1200 mm length) GI wire of suitable length adjusting level fixed to roof by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long complete all as specified and directed.

S&F Non asbestos fibre cement building boards, 12 mm thick, fixed to GI frame work with screws in jointless finish with joining compound and joining tape as per manufacturers instructions for ceilings flat or sloping complete all as specified and as directed.

M&L Preparation of new unplastered surface on ceiling , applying two coats of putty for smoothness, chalk whiting on surface and two coats of distempering oil emulsion complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or concrete/stone walls/ceilings including raking out joints, hacking for key, scubbing down with water etc. complete all as specified and as directed

M&L Rendering 5 mm thick in CM 1:3 on ceilings of concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:4 on concrete/ stone masonry surfaces finished even and smooth (without using extra cement). complete all as specified and as directed

M&L Rendering 15mm thick in CM 1:6 on stone masonry surfaces complete all as specified and as directed

Disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed.

Taking up or down steel tubing and connections, up to 25mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F Unplasticized PVC pipe 15mm bore of pressure rating 10Kg f/cm² fixed complete on walls ceilings or on floor complete all as specified and as directed.

S&F Unplasticized PVC pipe 20mm bore of pressure rating 10Kg f/cm² fixed complete on walls ceilings or on floor complete all as specified and as directed.

S&F Unplasticised PVC pipes 25mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S&F Stop valves, 25mm bore cast copper alloy, screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F Stop valves, 20mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L Providing precast cement concrete Type B1 1:2:4 using 20mm graded aggregate in slabs, shelves and similar articles set in CM 1:6 complete all as specified and as directed.

M&L Mild steel TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of brick work or concrete/ stone masonry wall built in cement mortar complete all as specified and as directed.

M&L Walling of laterite stone walls uncoursed, well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.

Demolition of Unreinforced concrete in ground floor and pavings not exc 15 cm thickness (below or above GL) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of Unreinforced cement concrete exc 15cm thickness above ground floors complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 with water proofing compound on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L 75 mm thick cement concrete type B1, 1:2:4 using 40mm graded aggregate with water proofing compound as in floors complete all as specified and as directed.

M&L Cement concrete 1:5:10 , type E2 using 40mm graded aggregate in foundations, filling etc. complete all as specified and as directed.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded aggregate in flooring complete all as specified and as directed.

M&L 20mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L Coloured non skid ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L 10mm thick cement mortar 1:4 on stone surface as backing coat finished rough to receive tiles complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300x450x9mm on vertical surfaces of wall such as skirting/dado etc complete all as specified and as directed.

M&L Vitrified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors/skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L 20mm thick granite (of any type) work table rubbed and polished in cooking platform in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L 12mm thick granite in CM 1:3 (of any type) work table rubbed and polished for wall lining and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F in repairs Vitreous china EWC wash down water closet pan (pedestal pattern), including white seat cover fixed complete all as specified and as directed.

S&F in repairs low level PVC flushing tank 10 litres capacity white with inlet ball valve float and handle including brackets, flush pipe of polyethylene low or high density PVC 32mm dia for low level cistern fixed complete all as specified and as directed.

S&F in repairs Health faucet, brass chromium plated jet spray including LDPE flexible cable with jet of 100mm long fixing to 15mm dia pipe complete all as specified and as directed.

S&F in repairs Vitreous china wash basin white flat back size 630x450mm but incl brackets complete all as specified and as directed.

S&F in repair Pillar taps chromium plated fancy type 15 mm dia bore type screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts ,screwed for iron pipe as fixed in repairs complete all as specified and as directed.

S&F in repair Sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F 32mm dia Waste fittings brass chromium plated for sinks ,WHB etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs Stop valve chromium plated fancy type cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends iron pipe or for union 15mm bore or pipe complete all as specified and as directed.

S&F in repair 75mm PVC SWR floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs PVC SWR Gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

S&F grating square 150mm size of PTMT complete all as specified and as directed.

Taking down LDPE pipes of any description size 32mm/50mm bore complete all as specified and as directed.

S&F Low density Polyethylene pipe (LDPE) 32mm bore of pressure rating 6kgf/cm2 fixed complete to walls, floors or in ceilings etc complete all as specified and as directed.

S&F Low density Polyethylene pipe (LDPE) 50mm boreof pressure rating 6kgf/cm2 fixed complete to walls, floors or in ceilings etc complete all as specified and as directed.

S&F in repairs Bib tap chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed and down screwed for iron pipe or for brass ferrule 15mm complete all as specified and as directed.

S&F Tubular towel rail 20mm dia D type 600mm long between flanges brass chromium plated complete all as specified and as directed.

S&F in repairs Shower rose chromium plated 125mm complete all as specified and as directed.

S&F Shower arm 15 mm size and 195 mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and as directed.

Dismantling cast iron drain pipe 75/ 00mm dia complete all as specified and as directed.

S&F PVC SWR pipe 110mm bore single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC SWR pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or on floors complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on walls complete all as specified and as directed.

S&F PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on floors complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm dia complete all as specified and as directed.

S&F PVC SWR bends any radius 75mm complete all as specified and as directed.

S&F PVC SWR bends any radius 75mm with acess door complete all as specified and as directed.

S&F PVC SWR bends any radius 110mm complete all as specified and as directed.

S&F PVC SWR junction Single T equal or unequal 110mm complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, smooth finished, and reforming benching as required, internal dia of pipe in 100 mm complete all as specified and as directed.

Taking down chowkats or frames and not exc.1.5 Sqm each with shutters(without taking of shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames but exc. 1.5 Sqm & not exc 4 Sqm each with shutters(without taking of shutters from the frame) complete all as specified and as directed.

Taking down wooden shutters of any description not exc. 1 Sqm each complete all as specified and as directed.

Taking down wooden shutters of any description but exc 1 Sqm & not exc 2 Sqm each complete all as specified and as directed.

Taking down and refixing shutters after carrying out necessary repair in the same opening and not exc 1 Sqm each complete all as specified and as directed.

Taking down and refixing door shutters after carrying out necessary repair in the same opening and exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

S&F Powder coated anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters ( fixed type) without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

Cutting holes in brick work built in cement mortar , exc one brick but not exc two bricks for inserting hold fast and making good dismantled portion in CM 1:3 complete all as specified and as directed.

S&F Flat iron hold fast with FI 20 x3mm and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in hold fast block including necessary form work etc complete all as specified and as directed.

S&F Second class hard wood,plain solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board /plywood core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Glazed and skeleton shutters,30 mm thick open rebated and prepared to receive glass,gauze, etc. edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc ; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

All as per item No. 93 here-in-before, but with 35 mm thick shutters complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in Square not exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 18/19 mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Second class hardwood plain fillets/beading not exc 3 Sq cm, square and rectangular or rounded on one edge or face, fixed with screws and wrought complete all as specified and as directed.

S&F 150mm Aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply only 150mm aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

All as per item No. 101 here-in-before but 100mm size complete all as specified and as directed.

Supply only 100mm aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section or cast aluminum alloy; 300mm complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight; 100mm size complete all as specified and as directed.

Supply only stainless steel butt hinges medium weight; 100mm size complete all as specified and as directed.

All as per item No. 106 here-in-before but 75mm size complete all as specified and as directed.

Supply only stainless steel butt hinges medium weight; 75mm size complete all as specified and as directed.

S&F Extruded aluminum alloy handle fabricated type anodized 150mm size complete all as specified and as directed.

Supply only extruded aluminum alloy handle fabricated type anodized 150mm size complete all as specified and as directed.

All as per item No. 110 here-in-before but 100mm size complete all as specified and as directed.

Supply only extruded aluminum alloy handle fabricated type anodized 100mm complete all as specified and as directed.

M&L Preparing new wooden surfaces over 10 cm width or girth and applying 2 coats of synthetic enamel painting over a coat of primer complete all as specified and as directed.

M&L Preparing old wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed.

M&L Preparing back of chowkats area tarred exc 0.1 sqm but not exc 0.50 Sqm and treated with tar or coal tar black paint complete all as specified and as directed.

M&L Preparing and treating small articles such as hold fasts area not exc 0.1 Sqm each complete all as specified and as directed.

M&L Preparing surfaces of new steel of any description over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L Preparing surfaces of old steel of any description over 10 cm in width or girth and applying 1 coats of synthetic enamel paint complete all as specified and as directed.

Hacking out old broken window/ventilator glass (any thickness, size, quality or description) for wooden metal frames or stone concrete surrounds glazed with putty or fixed with beads complete all as specified and as directed.

S&F Solid PVC door frame of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification and drawings complete all as specified and as directed.

S&F Factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain coloured PVC “C” channel having a PVC sheet strip of 20mm width stock inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour of PVC sheet fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement etc details as per specification and drawings complete all as specified and as directed.

M&L Cement concrete 1:3:6 type C1 using 20mm graded aggregate 75mm thick for plinth protection finished even and fair complete all as specified and as directed.

M&L Cement concrete1:3:6 type C1 using 20mm graded aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall/ceiling by scrapping down old treatment, preparing surface even and smooth using wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as directed.

M&L Preparation of new plastered surfaces of walls/celings, preparing surface even and smooth using wall care putty and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and as approved complete all as specified and as directed.

M&L Complete removal of existing treatment on external walls/ceilings by scrapping down old treatment and applying two coats of exterior grade anti-algael acrylic emulsion paint over one coat of wall primer paint including preparation of surfaces using wall care putty etc all as directed as per manufacturers instructions complete all as specified and as directed.

M&L Preparing newly plastered surfaces of external wals/ceilings and applying two coats of exterior grade anti-algael acrylic emulsion paint over one coat of wall primer paint over wall care putty etc all as directed as per manufacturers instructions complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fitting such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc. complete all as specified and as directed.

M&L for point wiring complete with two runs of 1.5 Sq mm single core (Phase and neutral), PVC insulated, unsheathed copper conductor FRLS cable multi-stranded 1100 V grade drawn through and including non-metallic rigid PVC conduct, concealed in wall complete, fied in roof etc with necessary fixing accessories such as bend, elbow, socket saddles etc including provision of facory made galvanized prestressed steel terminal boxes modular cover plate frame or required module complete for One light/Fan/exhaust fan/bell point controlled by one modular switch with and including 1.5 Sq mm single core PVC insulated unsheathed copper conductor FRLS cable multi stranded 1100 volt grade green incolour as earth continuity conductor connected to common earth dolly complete all as specified and as directed for following:- (i) Wiring shall be done in proper colour coding i.e Red, Yellow, Blue for phases , Black for neutral and green for earth. (ii) Cost for modular metal flush boxes modular frame of suitable module/size concealed to wall for mounting modular switch/sockets etc are included in the unit rate inserted. (iii) Modular fittings such as switches, sockets, fan regulator etc will be measured and paid separately.

One light point or one fan point controlled by one switch complete all as specified and as directed.

One 3 Pin, 5 Amps switch socket combination on independent board complete all as specified and as directed.

One 3 Pin, 5 Amps switch socket one same board with other switches complete all as specified and as directed.

One light point controlled by two way switch complete all as specified and as directed.

All as per Sl item No 131 here-in-before but one 3 pin, 5 Amps switch socket on Independent board with FRLS cable of size 2.5 Sq mm with and including 2.5 Sq mm copper conductor cable as earth continuity conductor green in colour and connected to common earth dolly complete all as specified and as directed.

All as per Sl item No 131 here-in-before, but for one 3 Pin 15/16 Amps, switch socket combination on independent board with FRLS cable of size 4 Sq mm with and including 4 Sq mm copper conductor cable as earth continuity conducotr green in colour and connected to common earth dolly complete all as specified and as directed.

S&F Modular switch, 240 V one way, single pole 6 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Modular switch, 240 V one way, single pole 16 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Bell push modular type 240 V , 6 Amps including connecting up electriclally complete all as specified and as directed.

S&F Celling rose of polycarbonate, 3 terminal including connecting up electrically complete all as specified and as directed.

S&F Socket outlet, 2/3 pin, 6 Amps, multipurpose, modular type, including connecting up electrically complete all as specified and directed.

S&F Socket modular type 2 in 1, 2/3 pin 6 & 16 Amps including connecting up electrically complete all as specified and as directed.

S&F Calling bell, AC 230V single pole including connecting tup electrically complete all as specified and as directed.

S&F Decorative ultra slim linear LED 20 W light fittings with extruded Aluminium heat sink, environmental friendly, energy efficient ready to use pack of ELITE LED of 20 W LED 6000K incl taking down unserviceable fluorescent tube light fitting complete all as specified and as directed. Make: Model LHEXBYPNIN1W020 of Havells or techno commercially equivalent.

S&F Decorative ultra slim linear LED 10 W light fittings with extruded Aluminium, heat sink, environmental friendly, energy efficient ready to use pack of E-LITE LED OF 10W LED 6000K,incl taking down unserviceable tube light fitting and complete all as specified and as directed. Make: Model LHEXBYPNIN1W020 of Havells or techno commercially equivalent.

S&F Building LED security light fitting. 35 watts Energy saving and environmental friendly long life, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection with suitable GI Bracket and flat iron bracings nut, bolt, washers etc incl Taking down old unserviceable bulk heading fitting complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement LED Ball Lamp 10 watt complete all as specified and as directed.

S&F Modular type fan regulator, stepped type 120 w, 2 module suitable for ceiling fan 230 v, 1200 sweep complete all as specified and as directed.

S&F sheet metal enclosure with socket single pole and neutral two pin with earth complete with SP MCB of 20 Amps with plug top complete all as specified and as directed. Note : (4 sq mm wiring will be measured and paid separately with item No 131.60)

S&F in replacement sheet metal enclosures distribution boards double door 4 way three phase 415 volts MCCB, ISOLATOR & MCBs comprising three phase four wire copper strip bus bar of appropriate capacity and comprising of the following :- (a) MCCB 4 Pole 160 AMPS AC 415 V 10 KA=01 No as incoming. (b) MCB SP 32/40 Amps-12 Nos 32/40 amps as outgoing Note:- (i) The DB shall be VTPN series of Make: V guard CAT No DBVTPS 12 W 160 A V DD MCCBIC INVIDIA or INDOASIAN/HAVELLS/HPL commercially equivalent. (ii) the DB shall flush fixed and making good the distrurbed surface matching with existing specifications shall be part of job at no extra cost. (iii) connection of the MCCBs/MCBs with cabel shall be made through appropriate size pin/bottle type thimble properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) Rate inserted for VTPN inclusive of all fittings such as MCCB, MCB Bus bar and labour and Misc cement and paint etc.

S&F Sheet metal enclosure factory made for MCB DB, SPN 4 way with 200 Amps bus bar 415 Volt, double door type, fixed/flushed on wall including electrically connecting up complete all as specified and directed.

S&F sheet metal enclosure factory made for MCB DB, SPN 12 way with 200 Amps bus bar 415 Volt, double door type, fixed/flushed on wall including electrically connecting up complete all as specified and directed.

S&F MCB SP 240 Volt, 6 to 32 Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB SPN 240 Volt, 40 Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F for RCBO (Residual Current Breaker with Over current Protection) Capacity 40 Amps, 30 A, 2 module (Ph&N) short circuit current fault current protection 240 Volts complete all as specified and as directed. Make :L&T Cat No AUF3C204003. Conforms to IEC 61009-1, IS 12640-2, EN 61009-1 Shortcircuit Breaking Capacity - 10 kA.

M&L Earthing with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron connected to earthing test point, main DB panel board continuous earthlead protected by 15 mm bore GI pipe light grade, 20mm bore GI light grade pipe for watering, necessary exvavation and earth work in any type of soil, PCC pit, RCC chamber cover with suitable reinforcement complete all as shown on electrical plat No 3 of SSR Part-I of 2009 complete all as specified and as directed. (VTPN-2, Single DB-1) Note:- Rate quoted shall deem to include for GI earth and GI pipe lead upto 7.5m length.

M&L Sub main wiring with two runs of single core 6 Sq mm copper conductor FRLS cable PVC insulated, unsheathed multistanded, 1100 V grade drawn through and including non metallic rigid PVC with all accessories such as bend elbow, socket,tee saddles etc, fixed concealed to wall/fixed to ceiling etc, including 4 Sq mm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100 V grade as earth continuity conductor connected to common earth dolly complete all as specified and as directed. Note :- 3 runs of 6 Sq mm copper cable and one run of PVC conduit will be measured as RM length.

S&F in repair Exhaust fan, plastic body suitable for 250 mm dia sweep with fixing accessories including making hole as per site requirement for suitable size complete all as specified and as directed.

RS ENTERPRISES

LAKSHMI BUILDERS

GMS Builders

ZOOM ENTERPRISES