Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC BUILDING NO XIV 231 AMPARANIRAPPEL P O BHARANANGANAM KOTTAYAM 686578 | KOTTAYAM | KERALA | 686578 | ₹7.7 L | L1 | Accepted-AOC L1 Lowest Bidder |
| 2 | L2₹7.8 LRejected-AOC KOONAMPALAYIL THULAPPALLI PO PATHANAMTHITTA 686510 | PATHANAMTHITTA | PATHANAMTHITTA | KERALA | 686510 | ₹7.8 L | L2 | Rejected-AOC L2 |
| 3 | L3₹8.0 LRejected-Finance | ₹8.0 L | L3 | Rejected-Finance L3 |
| 4 | L4₹8.4 LRejected-Finance | ₹8.4 L | L4 | Rejected-Finance L4 |
| 5 | L5₹8.7 LRejected-Finance PUNATHIL HOUSE PERUMBALLUR P O MUVATTUPUZHA | KOTTAYAM | KERALA | 686001 | ₹8.7 L | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | CATT CONSTRUCTIONS L1 | jibin joseph L2 | P M GOPAKUMAR L4 | RENJITH K.S. L6 | BIJUMON P V L5 | SINU K. SIMON L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00SHEET ROOFING | |||||||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,887.38 | kg | 166 ₹3.1 L | 167 ₹3.2 L | 196 ₹3.7 L | 195 ₹3.7 L | 190 ₹3.6 L | 160 ₹3.0 L |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,266.62 | kg | 166 ₹2.1 L | 167 ₹2.1 L | 158.8 ₹2.0 L | 175 ₹2.2 L | 175 ₹2.2 L | 170 ₹2.2 L |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 240.6 | sqm | 800 ₹1.9 L | 750 ₹1.8 L | 714.95 ₹1.7 L | 840 ₹2.0 L | 807 ₹1.9 L | 750 ₹1.8 L |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 50.05 | metre | 510 ₹25,525.50 | 400 ₹20,020 | 479.7 ₹24,008.99 | 450 ₹22,522.50 | 401 ₹20,070.05 | 500 ₹25,025 |
| 1.00 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 240.6 | sqm | 20 ₹4,811.94 | 125 ₹30,074.63 | 214.75 ₹51,668.21 | 200 ₹48,119.40 | 201 ₹48,360 | 225 ₹54,134.33 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.92 | cum | 8,500 ₹24,786 | 8,000 ₹23,328 | 7,841.3 ₹22,865.23 | 8,500 ₹24,786 | 8,500 ₹24,786 | 7,000 ₹20,412 |
Tender Value
₹9.9 L
EMD Value
₹24,787
Closing Date
28 Feb 2026, 6:00 pmClosed
Asst.Executive Engineer
O/o PWD Buildings Subdivision Kanjirappally
General Civil work
2026_PWD_837701_1
PWD/BLDG/TR/111813/2023
Open Tender
Civil Works - Buildings
180 days
Kappad - Kanjirappally - Kottayam
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,190
₹24,787
25 May 2026
18 Feb 2026
3 Mar 2026
18 Feb 2026
28 Feb 2026
18 Feb 2026
SHEET ROOFING
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1410876.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
PreliminaryAgreementForm.pdf
Tender Documents • 0.08 MB
epaymentform.pdf
Tender Documents • 0.05 MB
IntegrityPact.pdf
Tender Documents • 0.01 MB
Affidavit.pdf
Tender Documents • 0.01 MB
formoftender.pdf
Tender Documents • 0.01 MB
EBID.pdf
Tender Documents • 1.63 MB
BOQ_1410876.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid