Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC Award | |
| 2 | L2₹12.8 L+₹1.9 L (17.4%)Rejected-Finance HIMACHAL PRADESH HP | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹13.3 L+₹2.4 L (21.8%)Rejected-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹14.3 L
EMD Value
₹28,600
Closing Date
23 Jan 2025, 5:00 pmClosed
Executive Engineer
Executive Engineer Jal Shakti Division Mandi
C/o RCC Source Intake Chamber C/o Sedimentation Tank 10000 Ltr capacity C/o Slow Sand filter Bed 25.18 Sqm and Laying Jonting and testing of GI pipe in Gravity main 32mm dia 25mm dia Deposit Work
2025_HPIPH_98007_1
MAN12901-30
Open Tender
Civil Works
Item Rate
90 days
Bari Gumanoo
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹28,600
18 Feb 2025
14 Jan 2025
24 Jan 2025
14 Jan 2025
23 Jan 2025
14 Jan 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respect.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:3:6 (1 Cement: 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in all leads and lifts in:-
Foundation, footings base of columns and the like mass concrete.in all leads and lifts
Walls any thickness but not less than 0.1 mtr. thickness attached pillasters, buttresses plinth and string courses etc. from top of foundation level upto floor two level in all leads and lifts
Providing and laying cement concrete 1:2:4 (1Cement :2 sand:4 graded crushed stone aggregate 20mm nominal size and curing completre excluding the cost of form work and reinforcement for reinforced concrete work in all leads and lifts in :-
Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level .
Cement concrete flooring 1:2:4 (1cement:2sand: 4 graded crushed stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement in all leads and lifts. 40mm thick
Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including certring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete & plain concrete work in all leads and lifts in:-
Flat surface such as soffits of suspended floors, roofs, landing and the like floor etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge.
Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like
Providing mild steel/tor steel reinforcement for RCC work including bending, binding including cost of binding wire and placing in position complete upto floor two level in all leads and lifts.
Fixing GI pipe light grade for inlet, outlet and over flow pipe (Labour rate) of following dia in all leads and lifts complete in all respect.
32 mm dia
50 mm dia
Laying, jointing and testing of GMS tube in trenches (light grade) of following dia meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of GI pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately) in all leads and lifts.
32 mm dia
25 mm dia
Providing and fixing of Gun metal (with hand wheel) for inlet and outlet, includiing all leads lifts and carriage of material at site and to the entire satisfaction of Engineer Incharge.
32 mm dia
Providing & fixing precast concrete manhole cover & frame conforming to IS-12593-1988,part-I and IS 12592-1991, part-II, 560mm diameter , medium duty. in all leads and lifts complete in all respect.
Providing and Fixing of Cast Iron Sluice Valve 50 mm dia BIR make BIS No. 14846 with flange Table 17 including welding of flanges, Nuts & Bolts and Gasket etc. The sluice valve conforming to IS-780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.
Providing and placing in horizontal layers filtering media duly graded screened washed and cleaned as specified by the Engineer-in-charge including all leads and lifts.
Top layer : - Fine sand screened, clean, washed and graded 3mm to 6mm from approved quarry.
2nd layer : - Coursed sand screened, clean, washed and graded from 3mm to 6mm from approved source.
3rd layer : -Bajari screened, clean, washed and graded from 6mm to 20mm from approved source.
4th layer : - Bajari screened, clean, washed and graded from 20mm to 25mm from approved source.
Bottom layer : - Broken stone screened, clean, washed and graded from 50mm to 75mm from approved source.
Providing and Placing of 1st class standard bricks in filter bed two layer so as to take cross drains as per direction of the Engineer-in-charge.
Manufacturing, supplying fabrication and fixing of MS fabricated protection panel 750x750mm made of MS angle 40x40x4mm frame, MS angle 30x30x3mm for cover, MS flat 25x5mm for fixing of sliding door bolts,& MS sheet (12 gauge)2.5 mm thick for protection of manhole cover of storage tank including the cost of cutting and welding of MS angle flat and MS sheet, embending in RCC slab by drilling holes in MS angle and in RCC slab. Provision for providing and fixing sliding door bolts,3x16mm,MS handles 100mm, lock andd applying a priming coat red oxide paint and painting two coats with steel paint (Firoza blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
GULZARI LAL (BID ID -473102)
Rajesh Kumar (BID ID -473106)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .