Development of Park

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Plain Cement concrete (1:5:10) using 40 mm metal with hand mixing including cost and conveyance of all materials like cement, sand , coarse aggregate water etc., to site, seigniorage charges on all materials, Turn over Tax and labour charges, for mixing, laying , concrete ramming in 15 cm layers, finishing top surface to the required level curing etc., Complete for finished item of work as per .

Supply and placing of mild steel flats, angles, channels I-sections including its all necessary fittings & fixtures etc., complete

Random Rubble Stones in Cement Mortor 1:6 Prop using hard granite stone including Cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, Etc., including cost of Seigniorage Charges on all Materials, all taxes including Labour for cutting Stones to required size and shape mixing of Cement Mortor Construction, Scaffolding charges Curing , Etc., complete for finished item of work. (As per BLD-CSTN-48)

Plain Cement Concrete (1:2:4) prop (cement : fine aggregate: Coarse aggregate) using 20mm size hard granite m/c metal including cost and conveyance of all materials like cement, sand,coarse aggregate water etc., to site seigniorage charges on all materials. and labours charges, for mixing laying concrete ramming in 15 CM layers, finishing top surface to the required level curing etc., Complete for finished item of work as per (SS .402).(with hand mixing)

Raised Pointing to RR Masonary in Cement Mortor 1:3 prop , Including cost & Conveyance of all materials to site, cost of seignaiorage charges on all materials , all taxes, labour charges on all materials, curing etc., complete for finished item of work (As per S.S. 906) per 10 Sqm.

Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. (S.S. No. 504)

.Plastering 20mm thick in two coats with base coat of 16mm thick in C.M. (1:6) and topcoat of 4mm thick in C.M (1:4) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand,. Water, etc., to site, all operational, incidental charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work for uneven surface of walls {50% natural river sand + 50% rock sand}

Painting over a Priming Coat on New Plastered Surface

Painting with Synthetic Enamel paints - One Coat - for New Wood Work, Old Wood Work & New Iron Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Artistic Painting to Compound Wall incl all charges etc complete

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Plain Cement concrete (1:5:10) using 40 mm metal with handmixture including cost and conveyance of all materials like cement, sand , coarse aggregate water etc., to site, seigniorage charges on all materials, Turn over Tax and labour charges, for mixing, laying , concrete ramming in 15 cm layers, finishing top surface to the required level curing etc., Complete for finished item of work as per .

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering- For Column Raft footings

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering- For Columns up to Plinth beam Bottem & Columns up to roof beam bottem Ground Floor

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded .

CLEARING OF JUNGLE INCLUDING COST AND CONVEYANCE of all materials and labour charges etc complete

SUPPLY, Delivery and Installation of Air Swing with Carrying Capacity of 2 Persons of overall sizes 1000 x 890 x 1300 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25mmNB & 40MM NB, 50mm NB and 80 X 40 mm Rectangular Tube with Standing BASE SIZE OF 250MM Round size fixed with Deep Grooveé Self Aligning Ball Bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 44443.00 ( Item Price)+ Rs. 907.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Air Walker/ Sky Walker with Carrying Capacity of 1 Person of overall sizes 1100 x 550 x 1300 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25mmNB& 40MM NB, 50mm NB and 60 X 40 mm Rectangular Tube with Standing BASE SIZE OF 320 x 135 MM fixed with Deep Grooveé Self Aligning Ball Bearings & thrust bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 45227.00 ( Item Price)+ Rs. 923.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Big Arm Wheel with using Capacity of 2 Person of overall sizes 850 x 750 x 1920 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25mmNB & 50mm NB , Handle Bars madeup of High Quality Grip Rubber fixed with Deep Grooveé Self Aligning Ball Bearings & thrust using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 58359.00 ( Item Price)+ Rs. 1191.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Elliptical Machine with Carrying Capacity of 1 Person of overall sizes 1050 x 650 x 1400 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 40MM NB, 60 X 40 mm.Handle Bars madeup of High Quality Grip Rubber fixed with Deep Grooveé Self Aligning Ball Bearings & thrust bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 46697.00 ( Item Price)+ Rs. 953.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Supply & Installation of Rowing Machine/Rower.Technical Specification: double equipment 1. Dimensions (LxWxH): 1250 x 800 x 1150 mm 2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. 3. Main frame of NB 65mm (G.I.) ‘C’ Class Pipe. 4. Handle support frame of NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 9. Foothold made of NB 50mm (G.I.) ‘C’ Class Pipe. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless steel label fixed on equipment for ease of use. ( The Total Unit Cost is = Rs. 41639.00 ( Item Price)+ Rs. 851.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of 3-Person Waist Trainer( Standing Twister) with Carrying Capacity of 3 Persons of overall sizes 1450 x 1450 x 1350 mm with standing base of 300 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB & 40MM NB. Fixed wheel of 550 mm dia having standing positions equally spaced at 120 degrees each fixed with Deep Grooveé Self Aligning Ball Bearings & thrust bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 55615.00 ( Item Price)+ Rs. 1135.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Leg Press with Carrying Capacity of 2 Persons of overall sizes 2000 x 380 x 1650 mm with Seat Size of 300 x 300 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB & 40MM NB. fixed with Deep Grooveé Self Aligning Ball Bearings with Handle bars madeup of High Quality Grip Rubber and using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 59976.00 ( Item Price)+ Rs. 1224.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Supply & Installation of 3-Person Waist Trainer (Sitting Twister). with Carrying Capacity of 3 Persons of overall sizes 1500 x 1500 x 1350 mm with standing base of 350 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB & 40MM NB. Fixed wheel of 550 mm dia having standing positions equally spaced at each fixed with Deep Grooveé Self Aligning Ball Bearings & thrust bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 60564.00 ( Item Price)+ Rs. 1236.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Double Cross Walker/ Arm Strengthener with Carrying Capacity of 2 Persons of overall sizes 1100 x 915 x 1430 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 80mm NB & 60 X 40 mm Rectangular Tube fixed with Deep Grooveé Self Aligning Ball Bearings and Handle bars madeup of High Quality Grip Rubber using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 71393.00 ( Item Price)+ Rs. 1457.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Taichi Spinner (4) Wheel with using Capacity of 2 Person of overall sizes 1050 x 1000 x 1350 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 50mm NB , Handle Bars madeup of High Quality Grip Rubber fixed with Deep Grooveé Self Aligning Ball Bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 43855.00 ( Item Price)+ Rs. 895.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Shoulder Press with Carrying Capacity of 2 Persons of overall sizes 1800 x 700 x 1900 mm with Seat Size of 300 x 300 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB &32 mm NB ,60 X 40MM NB Rectangular Tube fixed with Deep Grooveé Self Aligning Ball Bearings and using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 67081.00 ( Item Price)+ Rs. 1369.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Chest Press with Carrying Capacity of 2 Persons of overall sizes 1800 x 700 x 1900 mm with Seat Size of 300 x 300 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB &32 mm NB ,60 X 40MM NB Rectangular Tube fixed with Deep Grooveé Self Aligning Ball Bearings and using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 68257.00 ( Item Price)+ Rs. 1393.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

SUPPLY, Delivery and Installation of Leg Curl : Technical Specification: 1. Dimensions (LxWxH): 1500 x 450 x 650mm. 2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. 3. Leg Support frame of NB 65mm and all other pipes of NB 32mm (G.I.) ‘C’ Class Pipe. 4. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 5. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6. Zinc primer paint is applied at all the welding points prior to finishing. 7. Base plate cover and all open end pipes covered by SS / LLDPE Caps. 8. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 11. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless steel label fixed on equipment for ease of use. ( The Total Unit Cost is = Rs. 40719.00 ( Item Price)+ Rs. 831.00 for inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Engaging of manmazdoor(uunskilled) etc complete

Providing , Fabricating and fixing One Instructional Sign Iinformation Sign Board) as specified in Cement Concrete Block Foundation at each location including cost of materials and labour , taxes for complete item of work as directed by the Engineer-in-Charge.

Providing of Detailed Operations and Maintenance manual for each Appropriate unit of Supplied goods.

EW Excavation for foundation for columns incl Laying of PCC (1:5:10) grade incl cost of vibration with Pin Vibrators & Laying of RCC 1:2:4 for columns incl HYSD Steel bars, centering, shuttering incl labour charges etc complete

Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work,

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Filling with Fine aggregate /Sand (Screened) for Mortarin trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of sand, water to work site and all operational, incidental, labour charges, seigniorage charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Filling with useful Sand

SUPPLY, Delivery and Installation of Merry-Go-Round 6 Seater with Fiber Seats The main centre pipe made with M.S pipe 70mm Dia 5’ feet long, at top of the pipe 30mm O.D. 14G pipe shaft with 2no’s taper bearing fitted, one 5’ Dia ring made with 30mm Dia pipe, and 6no’s “S” type pipe made with 25mm Dia 14G, top end welded to bearing set bottom end welded to 6’ Dia and 6no’s sitting seats made with Fiber sheet fixing on the bottom of the “S ” Type pipe top seat welding. One coat of red-oxide and three colour enamel paint only.

Sea-Saw 4 Seater Fiber Seats 2no’s Seats made with Fiber Seats and fitted both ends of 50mm O.D, pipe 2mm length of 7’ with bolts & nuts and both fitted on horizontal pipe 7’ length and 60mm O.D, 3mm “U” shape (rivers) with clamps. One coat red- oxide and enamel paint only. One coat red-oxide, Two Coats of 3 colors enamel paint.

Manufacturing supply and fixing of Swing Two Seater with M.S pipe horizontal 60 O.D, 14G pipe 10’ feet width M.S.pipe 4no’s legs 50 O.D.14G, 6mm chains with clamps, 2no’s wooden seats. One coat red-oxide and three colours painting including cost and conveyance of all materials labour charges etc., complete for finished item of work.

Spiral Slider Spiral Slider size : Height :8’ X 21/2’ –Width , Slide 5mm thickness Main pipe 3” X 3mm 10’ height with Ladder . 11/4” pipe and 1” pipe welding with Railing vovision. Children satisfy purpose. Smooth slide Two colour painting only.

Supply and fixingof precast CC blocks for kerbing made with rubberized moulds of M-30 Grade Design mix, with 350 kgs of cement per cum of concrete, 20mm-6mm nominal size hard granite machine crushed metal at 0.8 cum/cum of concrete and sand at 0.4 cum/cum of concrete including cost and conveyance of all material like sand,water,course aggregate,cement etc (Size: 600x325x150/115 mm)