SPL REPAIR TO BLDG NO T-92 AT MALL ROAD AND P-35 AT RIMC UNDER AGE B/R-II GE DEHRADUN

Amount

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m radius built in cement motar CM 1:6 complete all as specified and as directed

All as per Item No - 01 here-in-before but except bricks complete all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

M&L for 15 mm thick rendering on of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth with using extra complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering on of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth with using extra complete all as specified and as directed by Engr-in-Charge.

M&L for 10 mm thick ceiling rendering on of brick work or concrete surfaces in cement mortar 1:3 finished surfaces even and smooth with using extra complete all as specified and as directed by Engr-in-Charge.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

M & L 1:4:8 D-2 type cement concrete in foundations,filling and mass concrete complete all as specified and directed.

S&F TMT MS bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or complete all as specified and directed.

M & L nominal mix 1:2:4 foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slabs, underreamed piles and mass concrete complete all as specified and directed .

M & L nominal mix 1:2:4 beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs,folded plates,roof slabs, balconies, canopies, deck slabs etc. or in similar articles upto ist floor level etc complete all as specified and directed .

Material and labour nominal mix 1:2:4 (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like complete all as specified and directed by Engineer-in-Charge.

M&L Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

S & F formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed .

S & F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopingetc complete all as specified and directed .

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed .

Taking up or down 15 mm steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections complete all as specified and directed.

M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed

S&F in repair medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repair tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified.

M&L for glazed coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete complete all as specified and directed.

M&L Glazed ceramic tiles coloured 450 x 350mm, 300mmx 450mm , 7 to 8 mm thick, set and jointed on vertical surface in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plaster in cement mortar 1:4 etc complete all as specified and and as directed

M & L Virified /Double/ultracharged tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

ditto dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in cement mortar 1:4 complete all as specified and directed.

M&L for Durastone heavy duty coloured tile 300mmx300mm x 9-10mm thick exterior grade set and jointed with neat cement slurry and pointed in coloured of white cement to match including 15 mm thick screed bed in cement mortar 1:6 and dismantling of old tile complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of suitable primer complete all as specified

Material and labour for preparation of newly plastered surface of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified

M & L 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid incl board etc complete including taking down of old all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surface of wall/celing and applying three coat of white wash complete all as specified

M&L minimum 20mm x 150mm x 2700mm size WPC lining (fixed to wall /ceiling) inclusive of solvent and wall / ceiling system screw with metal grid complete as per manufacturer's instruction. The above grid is to be suspended at every 1200.. c/c in both direction by suitable supporting system complete including taking down of old all as specified and directed by Engineer-in-Charge

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and removing from site complete all as specified and directed.

Supply and fix in repair aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Titz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat frame : 101.60x44.45x1.60mm, Shuter verticle style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm Make : (i) Anodised aluminum section : Jindal/Hindalko/Indalco (ii) Particle board : Navipan/Puratuff/Kitlam (iii) Glass : Saint gobain/Modi guard/Tata

Supply and fix in repair for powder coated aluminium window alloy coated standared hollow section as mentioned below window frame (bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type with aluminium sections as per series -A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4m thick , fixed with glazing clips, rubber beading / gasket anodised beading, srew and lock type handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete all as specified and directed.shutter Top & bottom size :37.50x15x1.60mm, shuter inner lock size 37.50x15x1.60mm, chowkhat bottom size 50.30x26x1.20mm, chowkhat top & size 50x30x26x1.00mm and making good of wall surface with matching to existing surfaces complete all as specified and directed. Make: Anodised aluminium section: Joindal/Hindalko/Indalco. Glass: Sant gobin/Modi guard/Tata.

Material and labour for gypsum board false ceiling with cornice of approved design including GI Frame work and wiremesh with two coat of OBD complete including dismantling all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete as directed and specified.

M & L 18 to 20mm thick granite (Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

Material and labour for 18 to 20mm thick granite (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types (e) Green Marble

Granding of any type stone to achive mirror polishing on existing terrazzo/ kota / udaipur green/ marble stone flooring/skirting by cutting/ grinding and polishing complete all as directed.

S&F in repair 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to wall complete incl clamps for fixing to wall all as directed.

S&F in repair 110mm bore PVC (SWR) bend of any radius fixed as directed.

S&F in repair 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as directed.

S&F in repair 75mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed incl clamps for fixing to wall complete all as directed.

S&F in repair 75mm bore PVC (SWR) bend of any radius fixed as directed.

S&F in repair 110mm bore PVC (SWR) bend of any radius fixed as directed.

S&F in repair 75mm bore PVC (SWR) couplers for PVC pipe to join two pipe in series complete all as specified and directed

Hacking out old broken galss (any thickness, size quality or desription) from wooden frame or sotne, concrete or brick surrounds, glazed with putyy or bised with beads.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outcomplete all as specified and directed.

Returning, filling in, soil including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin etc complete all as specified and directed .

M&L for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete including dismantling all as specified and directed.

S&F 150 mm Salt glazed stoneware drain pipes, IS mark complete including dismantling all as specified and directed

M & L 150 mm dia cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engineer-in-Charge.

S & F 150 mm dia cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar l:l and pipe in position and blocking up end with cement concrete 1:2:4. type B-l for a depth of at least 30cm from the cut made complete all as specified and directed by Engineer-in-Charge.

M/L PCC 1:3:6 type C0 ( using 12.5 mm thick graded stone aggragate) as in surface channel drain. Complete all as specified and directed

Supply & fixing factory made single extruded WPC(Wood polymer composite) Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as specified and directed.

S&F factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 30 mm size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F 150 mm long steelness steel handle, cast type,complete all as specified and as directed

S&F steelness steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F steelness steel tower bolt 125 mm long of extruded section etc complete all as specified and as directed

Supply and fix ss sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Complete all as specified and directed by Engr-In-charge.

S&F floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to floor all as specified and directed.

S&F in repair door closer gydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg of Aluminuim die cast body complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and as directed.

S & F machine pressed rubber moulded precast concrete interlocking coloured (red & yollow) paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 etc complete all as specified and directed .

M & L for 25 mm thick sand cushioning etc complete all as specified and directed .

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement Complete all as specified and directed.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

Dismantling of framed or unframed timber scantlings 40 Sq cm and over in section, in any postion complete all as specified and directed..

&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section,MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge

S&F for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

S&F10mm thick plate (Fe 410-W(Gde-E- 250) quality-A) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmenother connections complete all as specified and directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Dismantling asbestos cement (corrugated , semi corrugated, etc.) sheets in roof coverings.Complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repair rotational moulded polyethylene1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete including dismantling all as specified and ditected.

S&F in repair 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

S &F in repair as Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed

S&F in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repair PVC nahani trap, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Supply and fix in repairs vitreous chinaware wash down water closet pan fency type including fixing bolt, and flushing cistern, Dual flush single piece wall mounting EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long stainless steel between flanges complete all as specified and as directed Make : Jaguar Cat Pt No: ACN-1111SM

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair soap dispenser with glass bottle in toilet block each one complete all as specified and directed. Make Jaguar Cat Part No: AKP -35735P

S&F in repair toilet roll Holder complete all as specified and as directed Make : Jaguar Cat Part No : 35751P

Supply and fix in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X40 cm complete including waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repair brass chromium plated bottle traps for wash basins, urinals with inlet and outlet screwed for pipe or connections inclding necessary packing union and cap and fixed complete all as specified and directed.

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

Supply and fix in repair health faucet brass chromium plated suitable for 15mm dia pipe with 1 or 1.25mtrmetre long flexible tube and ABS wall hook fixed to wall complete all as specified and directed.

S & F in repair Brass CP wall mixer 15 mm bore (wall mounted type) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F automatic sensor urinal and flusher and touchless valves prioritize hygiene and convenisencethe automatic flush sysem and eco-friendliness seamlessly screwed down for iron pipe and fixed complete all as specified and as directed

M&L 12 mm thick bison board fixed with screw on steel/ wooden frame work incl cutting etc as directed by Engr- in- charge .

M&L for stainless steel hollow letters of height 9-10", width 9-10" of side not less than 1-2" incl fixing arrangement on rigid surface and fixed as directed by Engr- in- charge .

M&L for cast/extrude section stainless steel solid Emblem of India size not less than 8" x 12" x 1/2" and weight not less than 1.50 Kg fixed to rigid surface complete all as specified.

M&L finishing walls with textured exterior/heritage paint of required shade : New /old (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete as directed and specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,

Demolition of concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and as directed.

Dismantling of 75 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Dismantling of water tanks capacity exc 500 ltrs complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.

M & L 18 to 20mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed.

M & L for 18 to 20 mm thick prepolished machine cut kota stone tile as in flooring incl 20 mm th cement screed base in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing. complete all as specified and directed.

All as per item no 28 but on vertical surfaces of walls as in skirting and dados incl 10mm th backing coat in CM 1:4. Complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed.

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush up to mother slab and removing WPT felt exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed Note: Work shall be carried out upto 3 storey. Rates of necessary scaffolding deemed to be include in this item

M&L cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion etc complete all as specified and as directed

M&L for applying cement slurry over existing roof surafce @ 3m Kg/Sqm incl mixing with water proofing liquid @ 0.15 Ltr per 50 Kg cement bag as per manufacturer's instruction. Complete all as specified and directed.

M&L for rendering 10 mm thick , in cement mortar 1:4 over RCC slab, mixed using water proofing compound liquid @ 200 ml per bag of cement. Complete all as specified and directed.

M & L for water proofing treatment to non-accessible roof slab with APP based madified polymeric membrane as per manufacturers instructions with following course of description below:- (a) Applying a priming coat of bituminous primer @ 0.30 kg / sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6 kg / sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms /sqm) centre core, laid on primed surface Fixed with hot molten bitumen of grade 85/25 @ 1.2 Kg / Sqm by forced applications as per manufacturers instructions with side over lap of 100 mm and end overlap of 150 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm over APP membrane. Note:- 1. The work of water proofing treatment shallbe got executed authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contrcator. 2. The work is required to be carried out at non-accessible roof slab upto three storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof. The rates quoted shall be deemed to be included for these items.

S&F IInd clss hard wood 35mm thick factory madeplain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as speicified and directed

S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars, edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed.

S&F IInd class hard wood, 30mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed.

Preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. Complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 18 mm thick comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Materia test certificate and authentication should be compulsory provided by the manufacturing company. Make Kumar Arch Tech Pvt Ltd/ Rajshree/ Fiber Techno Products / Eco Cell/ TVL Engineering Pvt Ltd (Flresta).

Supply & fixing factory made single extruded WPC(Wood polymer composite) Solid door frame/ chowkat of size 45X70mm comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as specified and directed. Make : M/S Kumar tech , M/s Raj shree & M/s syntex

S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed.

S&F factory made steel windows (Box type) with side hung shutters precoated (colourcoated/ powder coated) with double shutters (glazed and gauged shutter bothn ) with frame complete all as specified and directed and shown on drg TD 158 sheet 1/2 & sheet 2/2 . NOTE :- Measurements shall be tken and paid compositly for frame, glazed and gauged. Grill shall be measured and paid seperately under respective item. No extra claim shall be entertained on this ground

S&F for steel ventilator fixed (Box type) with side hung/top hung shutters precoated (colourcoated/ powder coated) with double shutters (glazed and gauged shutter bothn ) with frame complete all as specified and directed and shown on drg TD 158 sheet 1/2 & sheet 2/2 . NOTE :- Measurements shall be tken and paid compositly for frame, glazed and gauged. Grill shall be measured and paid seperately under respective item. No extra claim shall be entertained on this ground

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. Complete all as specified and directed by Engr-In-charge.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F double legged floor door stopper 150 mm long aluminium alloy with rubber etc complete all as specified and as directed

S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

S&F in repair mild steel helical door spring 150 mm longe ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed

S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4

S&F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repairs vitreous chinaware coloured wash hand basin with bracket of size 55X40 cm complete including CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

M&L in repair brass chromimum plated HWB mixture for mixing hot and cold water crewed for irom pipe complete all as specified and directed

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed

S&F brass chromium plated bottle traps for wash basins, urinals with inlet and outlet screwed for pipe or connections inclding necessary packing union and cap and fixed complete all as specified and directed.

S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&F modular socket combination 6/16 A,6 pin,2 module ,230 volts all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed

S&F for 100 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed

S&F 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed

S&F 50 mm cast iron cowls spun pipe (conforming to IS 3989) complete all as specified and as directed

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed

S&F for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100mm or 520x485x100 mm or 144x 468 x50mm ( clear depth 500 mm) -01Nos Make:- Sleek Elnora ( Asian Paint) Code 600, size 530x505x100 mm/ Godrej product code 6134 baan code LKY2PC214/Evershine size 520x485x95mm Complete all incl fixing of necessary telescopic channels, handels etc as required complete all as specified and as directed. (Make:- Hettich or equivalent)

S&F for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for Plain basket of size 510x470x200mm or 520x485x200 mm or 486x500x200 mm , Make:-Sleek Elnora(Asian paint) Code 600, size 530x505x200 mm/Godrej product code 6128, baan code LKY2PB218 /Evershine size 520x485x180 mm .Complete all incl fixing of necessary telescopic channels, handels etc as required complete all as specified and as directed. (Make:- Hettich or equivalent)

S&F framed work as in doors or gates of angle or other section Fe 410 W Gde E 250 with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete including cutting out of existing sheet if required complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M & L PCC 1:3:6 Type C 0 usind 12.5 mm graded stone aggregate for backing of door chawkhats complata all as specified and directed by Engr-in Charge

M&L for Preparation of old steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint etc complete all as specified and as directed

M&L for complete removal of existing treatment from wall upto plaster surface by washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Note: Work shall be carried out upto 3 storey. Rates of necessary scaffolding deemed to be include in this item

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items.

M & L for ATT post construction Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified.

M & L for ATT post construction Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M& L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L for exterior grade, coloured (Red & Yellow) glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick (as approved GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. including 15 ,mm thick cement screed bed in CM 1:6 etc complete all as specified and as directed complete all as specifed and as directed.

Supply, install, test and commisssioning split air conditioning unit 1.5 Ton, 3 star, eco friendly refrigerant complete with drive motor, air cooled copper condenser with all accessories varied speed and dual rotary compressor, including fixing the out door units with mounting bracket , made Up of heavy duty GI steel, wall mounted type, Powder coated incl nuts & bolt etc as per manufacture recomendation and fixing of room unit on wall , providing and making interconnection , including refregerent piping with nitryle rubber insulation and control cable from indoor to out door , first charging of refrigerent gas including cordless remote and directed by Engr - in- Charge

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90V to 300V with output voltage stailized at 230V with accuracy of + 2.5% and of capacity 05 KVA

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge Note: The wiring to be done as per IE rule and maintain colour code accordingly.

(a) One light point/ ceiling fan point/ Exhaust fan point controlled by one-one way switch.

(b) One bell point controlled by one-one way switch.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No 182 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

S&F modular switch 1 way 6A,1 module,230 volts all as specified and directed.

S&F modular socket 6A-2/3 pin, 2 module, 230 volts all as specified and directed.

S&F modular socket combination 6/16 A,6 pin,2 module ,230 volts all as specified and directed.

S&F modular Fan step regulator, 120W,2 module ,230 volts all as specified and directed.

S&F Modular Bell push 6A 1 module

S&F Bell Multi Music type

S&F modular white cover plate with frame,3 module ,230 volts all as specified and directed.

S&F modular white cover plate with frame,4 module ,230 volts all as specified and directed.

S&F modular white cover plate with frame,6 module ,230 volts all as specified and directed.

S&F modular white cover plate with frame, 8 module ,230 volts all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC.

S&F in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F LED luminaries 600X600mm 35/36 watt ,220 volts AC Recessed type with high efficiency pmma diffuse soft glare free light complete with driver ,holder & LED lamp suitable for roof ceiling including connection ,all as directed by engr-in-charge

Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

S& F in replacement LED bollard type fitting 10 watt capacity inverted Pyramid tripod type with soft 360 degree distribution with IP 65 protection,complete with PCC foundation including taking down old fitting

Supply and fixing flood light fittings. Energy saving environmental friendly, long life, exclusive innovative epoxy powder coated die-cast aluminium housing IP65 flood light with high power LED's as light sources, suitable for high lighting architectural features or retail spaces as 100 watt LED with lumen output 12500, system efficiency110/120 LPW,10KV SPD, CCT>5700K, PF>0.95, Glass cover complete including taking down old flood light fittings all as specified and directed.

S&F in relacement LED decorative post top lantern for Garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version including taking down old unserviceable post of lantern.

M & L in replacement of laying, jointing and testing of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size all as specified and directed.

M&L for Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in any type soil complete all as specified and directed.

M&L for Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M&L for Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed.

M&L for laying well burnt brick sub class 'B' old size in trenches, as protection of under ground cable complete all as specified and directed.

M & L laying galvanised steel tubing 50 mm bore light grade laid in trenches or fixed to poles/walls etc for cable protection complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc complete all as specified and directed.

M & L, transporting, errecting and fixing in replacement Steel tubular swaged poles type 410 SP-31, 9.00 metre long , complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified including painting with two coats of synthetic enamalled paint over one coat of red oxide primer and 06 Nos bands/ straps with yellow and black colour ( 30 cm wide each)epoxy heat resistant paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5 cm height including tarring/Bituminous paint one coat on steel surface embedded in concrete foundation complete all as specified and shown on drawings and directed.

S&F DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement including DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge,

S&F sheet metal enclosures 240 volt 8 way with suitable rated bus bar for Single door IP-43DB's complete all as specified and directed .

S&F MCB SP 240 volt 10 KA 5 to 40 Amp, conforming to relevant IS complete all as specified & directed.

S&F MCB SPN 240 Volt 10 KA 6 to 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand cat no 4086 18 or eqvt in L&T/ Schneider.

S&F complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (ubsheathed) cable size 4x6 Sqmm and 2x 6 Sqmm as in continuous earth wire drawn into & including non metallic PVC conduit medium grade suitable size , ISI marked complete with fitting and fixings accessories laid concealed complete.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including old conduits, switches, ceiling rose lamp holder, light fitting any type and fan regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

S&F switch modular 6 Amps 230 Volts one way switch.

S&F Socket 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed.

S&F Socket 6A/16 Amps-2/3 pin AC 230 Volts modular type complete all as specified and as directed.

S&F Modular Bell Push AC 230 volts 5/6 Amps complete all as specified and as directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete .

S&F TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including fixing of DPX3 MCCB 125 Amps 3 pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge,

S&F sheet metal enclosures 240 volt 8 way with suitable rated bus bar for Single door IP-43DB's complete all as specified and directed .

S&F MCB SPN 240 Volt 10 KA 40 Amp conforming to IS complete all as specified & directed.

All as per item No 214 but with copper conductor cable FRLS size 2 x 4 Sqmm and 1 x 4 Sqmm . Note:-6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth strip 4 Sqmm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

Jain Engineering Works (BID ID -3243847)

M/s Ruchi Rabh associates (BID ID -3237662)

Shree Durgai Construction Co. (BID ID -3233775)

M/s Anil Kumar (BID ID -3234522)