Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance | ₹2.8 L | L1 | Admitted-Finance |
| 2 | L2₹2.9 LAdmitted-Finance | ₹2.9 L | L2 | Admitted-Finance |
| 3 | L3₹3.0 LAdmitted-Finance VILLAGE KHURAHAL PO DHAWAL TEHSIL SUNDER NAGAR DISTT MANDI HP | ₹3.0 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Roop chand L1 | Mahender Singh L3 | Bishan Dass L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing of 4 HP submersible water pumping set (For hand pump)of reputed make such as Kirloskar ,BS , KSB, Sabar , etc confirming to latest relevent BIS code.The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for clear cold water with turbidity up to 50 PPM having greased packer bearings & shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft confirming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make confirming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear & tear.It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps,cable clips & depth gauge etc. The pump should be suitable for operation on data given below:- Total Head : 25 Mtr. Discharge :- 5 LPS | 1 | Each | 45,000 ₹45,000 | 46,000 ₹46,000 | 45,500 ₹45,500 |
| 3.00 | Providing and fixing of starter (direct on line) of 4 HP of standard make such as L&T/MEI/Havels/AVON/Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 500 ampere of standard make as per the satisfaction of Engineer-in-charge. | 3 | Each | 9,000 ₹27,000 | 10,000 ₹30,000 | 9,500 ₹28,500 |
| 4.00 | Providing suitable oil immersed starter 80 HP delta/direct on line/auto transformer/. starter rotor starter of MEI/.Kilburn/Jyoti /L&T/Siemens make as per IS:8544:1979 with upto date ammendments for squirrel cage/slip ring motor mounted on panel board with magnetic type over-load release and dashpot, time lag, under voltage release with or without initial oil filling as the case may be with single phae preventor as per IS:1248( P-V) 1983 with upto date ammendments
" | 1 | Each | 38,000 ₹38,000 | 39,000 ₹39,000 | 38,500 ₹38,500 |
| 5.00 | Providing and fixing of water proof PVC Cable 3 core, 4 sqmm as per IS-674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge. | 260 | Rmt | 270 ₹70,200 | 310 ₹80,600 | 300 ₹78,000 |
| 6.00 | Providing and fixing MS sheet box size (0.60x0.30x0.90mm fabrocated with angle irong of four legs mounted in cement concrete 1:3:6 for electric metred starter switch and other accessories with locking arrangement complete. | 2 | Each | 7,100 ₹14,200 | 7,200 ₹14,400 | 7,200 ₹14,400 |
| 7.00 | Providing and fixing steel wire rope 6mm Thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pum set in bore well including comlete arrangement of fastening etc.complete in all respect as per the direction of Engineer-In.Charge. | 50 | Rmt | 90 ₹4,500 | 110 ₹5,500 | 100 ₹5,000 |
| 8.00 | Providing and fixing of 50 mm colomn pipe complete in all respect as per the direction of Engineer-In.Charge. | 21 | Rmt. | 2,000 ₹42,000 | 2,200 ₹46,200 | 2,100 ₹44,100 |
| 9.00 | Providing and fixing of C.I. Nipple 63 mm complete in all respect as per the direction of Engineer-In.Charge. | 1 | each | 1,800 ₹1,800 | 1,900 ₹1,900 | 1,850 ₹1,850 |
| 10.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. | 6.08 | cum | 500 ₹3,040 | 600 ₹3,648 | 550 ₹3,344 |
| 11.00Jointing ( by way of circumfrential butt welded joints by electrical arc welding) and testing of galvanised mild steel tubes(G.I) pipe of following dia meters confirming to BIS 1239-2001 (GI Pipes) (latest with upto date amendments) having wall thickness as per code with bevelled/ plain ends in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The damaged portion of the pipes and specials made form the parent tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately). | ||||||
Tender Value
₹2.8 L
EMD Value
₹5,595
Closing Date
15 Dec 2025, 5:00 pmClosed
Executive Engineer Jal Shakti Division Larji
Executive Engineer Jal Shakti Division Larji
LWSS Reri Mashgan and Dogadhar in tehsil bhunter distt. Kullu H.P.
2025_HPIPH_122842_10
NIT No. 10733-10832 Dated - 06/12/2025
Open Tender
Civil Works
60 days
Bhunter
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Executive Engineer Jal Shakti Division Larji
₹5,595
22 Dec 2025
6 Dec 2025
16 Dec 2025
6 Dec 2025
15 Dec 2025
6 Dec 2025
Amount
Providing and fixing of 4 HP submersible water pumping set (For hand pump)of reputed make such as Kirloskar ,BS , KSB, Sabar , etc confirming to latest relevent BIS code.The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for clear cold water with turbidity up to 50 PPM having greased packer bearings & shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft confirming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make confirming to relevent BIS code latest with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear & tear.It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps,cable clips & depth gauge etc. The pump should be suitable for operation on data given below:- Total Head : 25 Mtr. Discharge :- 5 LPS
Providing and fixing of starter (direct on line) of 4 HP of standard make such as L&T/MEI/Havels/AVON/Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 500 ampere of standard make as per the satisfaction of Engineer-in-charge.
Providing suitable oil immersed starter 80 HP delta/direct on line/auto transformer/. starter rotor starter of MEI/.Kilburn/Jyoti /L&T/Siemens make as per IS:8544:1979 with upto date ammendments for squirrel cage/slip ring motor mounted on panel board with magnetic type over-load release and dashpot, time lag, under voltage release with or without initial oil filling as the case may be with single phae preventor as per IS:1248( P-V) 1983 with upto date ammendments "
Providing and fixing of water proof PVC Cable 3 core, 4 sqmm as per IS-674-Part-II-1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority as per the satisfaction of Engineer-in-charge.
Providing and fixing MS sheet box size (0.60x0.30x0.90mm fabrocated with angle irong of four legs mounted in cement concrete 1:3:6 for electric metred starter switch and other accessories with locking arrangement complete.
Providing and fixing steel wire rope 6mm Thick for holding the column assembly and pump set in bore well to avoid falling of assembly and pum set in bore well including comlete arrangement of fastening etc.complete in all respect as per the direction of Engineer-In.Charge.
Providing and fixing of 50 mm colomn pipe complete in all respect as per the direction of Engineer-In.Charge.
Providing and fixing of C.I. Nipple 63 mm complete in all respect as per the direction of Engineer-In.Charge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
Jointing ( by way of circumfrential butt welded joints by electrical arc welding) and testing of galvanised mild steel tubes(G.I) pipe of following dia meters confirming to BIS 1239-2001 (GI Pipes) (latest with upto date amendments) having wall thickness as per code with bevelled/ plain ends in random length of 4 to 7 meters, including specials, short pieces, bends, reducers, tees etc. made from parent tube, The laying of pipe will include all operation such as cutting, welding, jointing, providing & fixing of MS flanges, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The damaged portion of the pipes and specials made form the parent tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately).
Providing and fixing heavy duty Kit kat 300 emp. Complete in all respect with in all leads and lifts.
Providing and fixing bore clamps 200 mm dia Complete in all respect with in all leads and lifts.
Providing and fixing bore caps 200 mm dia Complete in all respect with in all leads and lifts.
Transformer oil Complete in all respect with in all leads and lifts.
Bishan Dass (BID ID -597249)
Mahender Singh (BID ID -597272)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Terms.pdf
Tender Documents • 0.28 MB
BOQ_180265.xls
BOQ • 0.35 MB
Form8.pdf
Tender Documents • 1.43 MB
Download all tender documents and submit your bid
