Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.9 Cr
EMD Value
₹9.9 L
Closing Date
3 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Panchayat R&B Division Devbhumi Dwarka.
Construction of Minor Bridge on Navagam Bhanvad Road Near Navagam Village Tal.Bhanvad (First Attempt)
366025
30/2026-27
Open
Civil Works
Works
Devbhumi Dwarka
14 documents required · 14 mandatory
₹12,000
Executive Engineer, R & B Panchayat Division Devbhumi Dwarka
₹9.9 L
16 Nov 2026
16 Nov 2026
16 Nov 2026
3 Dec 2026
16 Nov 2026
120 days
BILL OF QUANTITIES (BOQ)
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
1 Clearing and grubbing road land including uprooting rank 1.52 Hect. 28455.09
vegetation grass bushes, shrubs, sapling and trees girth up to
300 mm removal of stumps of trees cut earlier and disposal of
unserviceable materials (C) By mechanical means in area of
light jungle (MJB + Diversion Portion).
2 Demarcation of road alingment including marking out road 0.4 Km 2706.50
line by providing and fixing wooden pegs or steel rod of
required size at every 25 M to 50 M. including excavating
trenches ion both sodes of 0.30 m. x 0.30M. including
supplying of labours and all materials for every work etc
3 Fabrication and installation of barricades including painting 144.00 Nos. 3035.05
with fluorescent paint and fixing panelled plain MS sheets
SWG of 1.8 m height and M.S. Posts angle 40 x 40 x 5 mm at
2.5 m c/c and dismantling the same after completion of work,
arrangement for blinker lights on barricades during night as per
requirement and as per the instruction of the engineer as per
site requirements. During the construction, barricading has to
be kept continuously. Nothing extra will be paid for
dismantling and re-erecting the barricades for other location of
flyover and for the purpose of road
widening/diversion/resurfacing, utility identification/diversion
etc. There should not be any opening at the end of barricade
except at locations approved by Engineer.
(i) Barricades on either side shall be measured individually.
(ii) Once barricade has been provided and work started,
removal of barricade will not be permitted till completion of
pile, pile cap, pier and pier caps, portal beams, segment
erection, I girder, erection, till completion of entire
superstructure.
(iii) For 2.0m barricades adequate blinking lights on barricade
during night time must be ensured. The cost of this item should
include provision for power pack / Genset etc. so as to ensure
the blinking of lights in night time as long as barricades are in
position at the work spot.
(iv) After completion of the entire work, the barricades shall be
the property of the contractor.
(v) The rates should be all inclusive for shifting/erecting/re-
erecting the barricade for utility diversion/identification & road
widening/diversions.
(vi) It is specifically highlighted that barricading provided
during construction shall be limited to 1m to 2m from outer
edge of structure to be constructed.
4 Dismantling of Flexible Pavements (Dismantling of flexible 128 Cum 403.75
pavements and disposal of dismantled materials up to a lead of
1000 meters, stacking serviceable and unserviceable materials
separately) ii) By Mechanical means. A) Bituminous course
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
5 Dismantling of Cement Concrete Pavement (Dismantling of 184 Cum 744.37
cement concrete pavement by mechanical means using
pneumatic tools, breaking to pieces not exceeding 0.02 cum in
volume and stock piling at designated locations and disposal of
dismantled materials up to a lead of 1000 metres, stacking
serviceable and unserviceable materials separately)
6 Dismentaling the existing structure including removing and 2061.5 Cum 630.24
stacking the dismentelled materials as and where directed. A)
7 Removing all type of hume pipes and stacking within a all 105 Rmt 216.65
lead and lifts.
8 Providing flood gauge marks on substructure as per design 34 Rmt 167.03
including painting complete.
9 Diversion of water course, providing cofferdam and bund or 10 LS 50000
island as may be necessary for foundation and maintaining the
same for the period as may be necessary.
10 Carryout Geo-technical investigation work including drilling 20 Rmt 2128
150 mm dia bore holes in all sorts of soil, ordinary rock and
hard rock, upto maximum depth as mentioned, collection
undisturbed samples and conduction standard penetration tests
alternate at an interval of 1.5 to 2.0 m depth, conducting
necessary laboratory tests for all type of classification and
determination of soil parameters if required, including
submission of report in three copies covering investigation data
and recommendation for SBC and the pile capacity considering
the design criteria, all per specification.
1) The rate is inclusive of submitting soil investigation report
in three sets in hard copy as well soft copies.
2) The rate is inclusive of all materials with contractor's labour,
tolls and plants, machineries, as required.
3) The rate is inclusive of all taxes including services tax. For
11 Excavation for foundation for Pier/Abut footing, Diversion 3204.00 Cum 511.11
portion, Retaining wall, Head wall, toe wall and etc. in
sand, gravel, clay soft soils and murrum etc. including
shoring, strutting dewatering as necessary and disposing of the
excavated stuff as directed. The rate is inclusive of
contractor's own machinery and equipment, labour, taxes,
temporary works, consumables. leading & lifting, shoring,
strutting, timbering and buttressing with sand / clay bags and
all such measures necessary to retain in position the sides of
foundation pit and including refilling the approved excavated
soil, clearing and carting excess earth as directed within site
limit. The rate is also inclusive of dewatering by manual or
mechanical means, if require. (A) Depth upto 3.0 M. including
all leads and lift (MJB + Approach + Diversion portion).
12 Excavation in large boulders and soft rock for Pier/Abut 1924.00 Cum 716.55
footing, Retaining wall, Head wall etc. by welding including
shoring, strutting and dewatering as necessary and disposing of
the excavated stuff as directed (Approach + MJB Portion).
13 Excavation in hard rock by dry-wet blasting and chiselling 1435 Cum 1675.31
including dewatering preparing foundation base by proper
benching and stepping and disposing of the excavated stuff as
directed. (B) prohibited Blasting work (MJB Portion).
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
14 Providing and fixing mild steel dowel bars of minimum 32 432 Rmt 450.07
mm dia. for anchoring by drilling holes in foundation strata
including necessary bending, hooking of dowel bars and
grouting the holes complete as per detailed drawing and as
directed (MJB Portion).
15 Providing and filling in Abut/Pier foundation, Diversion 920.00 Cum 3692.44
Pipe Foundation, Retaining wall, Head wall & Toe wall
Footing and etc. with ordinary Cement concrete M-15 mix
and providing necessary vertical pin headers including
formwork, vibrating, ramming and curing complete (MJB +
Approach + Diversion Portion).
16 Providing and Casting in situ Controlled Cement Concrete 1425.00 Cum 4935.14
M35 for R.C.C. Raft footing for Pier/Abut, Retaining wall
foundation and cutt-off walls including necessary shuttering
laying, vibrating, ramming and curing complete. (MJB +
Approach Portion).
17 Providing and placing in position FE 550D (With FBEC) bar 547.00 MT 73606.57
reinforcement for following items including cutting bending
hooking and tying complete as per detailed drawing.For RCC
Raft & Open foundation, Piers, Abutment, RCC side
walls, Abutment cap & Dirt wall, Pier Cap, Solid Slab,
Pylon, Approach Slab, Crash Barrier, Wearing Coat,
Retaining wall footing, Retaining wall Stem, Toe wall,
Head wall and Kerb. (MJB + Approach Portion) (For FBEC
rate, Refer seperate Item)
18 Providing and filling trenches of Labour charges - Excavator 365 Cum 3657.68
in rocky strata with ordinary cement concrete M-15 (For Abut
& pier foundation) (MJB Portion).
19 Filling available excavated earth (excluding rock) in trenches. 1861 Cum 136.92
plinth, sides of foundations etc. in layers not exceeding 20 cm.
in depth consolidating each disposited layer by ramming and
watering. (For Abut & pier foundation) (MJB Portion).
20 Providing and casting in situ controlled cement concrete M-35 756.00 Cum 5542.19
for R.C.C. component as per drawings including centering
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete. (1) Piers (2) Abutment (3)
RCC side walls (4) RCC Retaining wall
(A) Height Upto 5.0 M.
(MJB + Approach Portion)
(B) Height 5.0M to 10.0M (MJB Portion) 12 Cum 5866.86
21 Providing and casting in situ controlled cement concrete M35 307 Cum 5622.15
for R.C.C. work in pier cap, abutment cap,inspection
platform slab and dirt wall including controlled cement
concrete M45 bed blocks or pedstals of required size below
bearings as per detailed drawings, centering, shuttering,
scaffolding, wherever necessary, laying vibating, curing and
finishing complete.
22 Providing and laying Tar Paper bearing below solid slab as 230 Sqm 47.08
directed by engineer in charge.
23 Providing and fixing in position Mild steel dowel bars in pier 455 Rmt 341.29
caps or abutment caps for anchorage in fixed end as per
detailed drawings including cutting, bending and welding
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
24 Providing and fixing in position Mild steel dowel bars in pier 455 Rmt 399.70
caps or abutments caps for anchorage in free end as per
detailed drawing including cutting, bending and welding
25 Providing and applying anti-carbonation, anti fading, mold 4640.00 Sqm 121.09
resistant, heat insulating, and 100% acrylic breathable
decorative external waterproof coating of approved shade
having Viscosity @ Room Temperature by Ford cup No. B-4
(dilute 2 parts of product with I part of water) 18 to 30 sec. pH
of 7.00 to 10.00 and Sp. Gravity @ Room Temperature
1.30+0.1, tested for carbon dioxide diffusion resistance
properties for coating materials and coating systems for
applied to open atmosphere surface of substructure as well as
on superstructure as per DIN EN 1062-6 (2002-2010) by a
NBA Grade "A" accredited institution (For Pier/Abut,
Pier/Abut Cap, Dirt wall, Side wall, Retaining wall, Super
structure and crash barrier). (MJB + Approach portion)
26 Providing and laying - Fitter Media 600mm thick directed at 620 Sqm 1239.35
the back of abutments, retaining wall, Head wall and side walls
as per detailed specifications. (MJB + Approach Portion)
27 Providing & laying weep hole in Abutments, retaining wall, 620 Nos. 86.70
head wall and side wall by using A.C. pipe of 100 mm
including laying in proper grede and jointing the completed as
per detailed specification. (MJB + Approach Portion)
28 Providing and filling sand behind abutments, retaining wall 1870 Cum 504.42
and between head wall in layers as directed. (MJB + Approach
29 Supplying and laying of bi-axial extruded high modulus 1486 Sqm 338.00
polypropylene geogrid having minimum layer coefficient ratio
as 1.3, junction efficiency not less than 90% and with 38mm x
38mm mesh opening. The roll size shall be 50.0 x 3.95 m, at
easily accessible location including top and bottom, with all
leads and lifts, manpower and machinery, materials, labour etc.
complete and as directed by Engineer - In - Charge (As per
Govt. GR, Below road crust and Abutment). (MJB + Approach
30 Providing and casting in situ controlled cement concrete M-35 1512 Cum 5669.46
for R.C.C. solid slab including centering, scaffolding, curing
and finishing complete.
31 Carrying out load test of super structure as directed 250 MT 169.92
including all necessary materials plant equipement,
instruments, labour and arrangements for test directed. (MJB
32 Providing and casting in situ controlled cement concrete M40 177 Cum 5615.40
for average 100 mm thick Wearing coat laid as directed
including tamping, vibrating, finishing, curing and filling in
joints with bitumen complete. (MJB + Approach Slab Portion)
33 Providing and casting in situ controlled cement concrete M35 1 Cum 5186.48
for R.C.C Architectural Pylon including formwork curing
and finishing, complete. (MJB Portion)
34 Providing and casting in-situ controlled cement concrete M40 217 Cum 5265.78
for Crash barrier including formwork, curing and finishing
complete (MJB + Approach Portion).
35 Providing G.I. 100mm diameter water spouts including 86 Nos. 536.03
necessary iron gratings as per drawings. (MJB Portion)
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
36 Providing and casting in situ controlled cement concrete 62 Cum 5394.27
concrete M30 for approach slab including formwork curing
and finishing complete. (MJB Portion)
37 Providing and fixing marble slab including engraving and 2 Nos. 1012.65
painting complete. (i) Size 75cm x 60cm x 4cm. (MJB Portion)
38 Providing Pre-moulded asphalt filler joints as per 157.5 Sqm 703.53
drawings.(A) 12mm (MJB Portion)
39 Providing and laying Double Walled corrugated Pipes 757 Rmt 217.15
(DWC) of Polyethylene (conforming to IS:14930-II) of 90mm
O.D. with fittings and necessary connecting accessories of
same material at required depth for laying cable below
footpath slab etc. complete as per specification and as directed
by Engineer. (MJB + Approach Portion)
40 Painting Two Coats on New Concrete Surfaces (Painting 1293.00 Sqm 81.81
two coats after filling the surface with synthetic enamel paint in
all shades on new plastered concrete surfaces) - For inner face
of crash barrier (MJB + Approach Portion)
41 Road marking with hot applied thermoplastic paints with 257.00 Sqm 367.72
reflectorising glass beads on bitumin surface providing and
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds
as per IRC:35-2015. The finished surface to be level, uniform
and free from streaks and holes. zebra patta /bump patta
lane/center line/ edge line/cut patta. The white color marking
should provide liminance coefficinet on cemend road shalll be
min 130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day time. The
marking should meet the performance criteria for night time
reflectivity, wet reflectivity and skid resistance as mentioned in
the section-15 of IRC 35-2015. Warranty for the Retro
reflectivity should be two years. (MJB + Approach +
Diversion Portion)
42 Cat Eye / Road Stud / RPM: Supplying of Molded Twin 110 Nos. 326.23
Shanks Raised Pavement Markers made of polycarbonate and
ABS moulded body and reflective panels with micro prismatic
lens capable of providing total internal reflection of the light
entering the lens face and shall support a load of 13635 kgs.
tested in accordance to ASTM D 4280 Type H and complying
to Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height,
width and length shall not exceed 20 mm, 130 mm and
mm and with minimum reflective area of 13 Sqcm on each side
and the slope to the base shall be 35 +/- 5 degree. The strength
of detachment of the integrated cylindrical shanks, (of diameter
not less than 19 +/- 2 mm and height not less than 30+/- 2 mm)
from the body is to be a minimum value of 500 Kgf. Fixing
will be by drilling holes on the road for the shanks to go inside,
without nails and using epoxy resin based adhesive as per
manufacturers recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed by Engineer-
in-charge. (MJB + Approach Portion)
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
43 Providing and fixing MS Anchor Plates of size 350 x 350 x 16 Nos. 2003.84
16 mm thick along with 4 nos, minimum 500 mm long GIJ
type M20 Grade 8.8 Galvanised Bolts with suitable size of GI
nut (16 No.s of nuts & 8 Nos of visor) / washers with one coat
of red oxide and two coats of bituminous black paint and
fixing on crash barrier including necessary erection, labour,
equipments, welding / drilling, grouting / fixing of plates as per
specifications and as directed by Engineer. (MJB Portion)
44 Providing and casting in situ Ordinary plain cement concrete 418 Cum 4142.22
M-20 for Toe walls including necessary shuttering laying,
vibrating, ramming and curing complete. (Approach + Pitching
45 Box cutting the road surface to proper slope and camber for 186 Cum 109.24
making a base for road work including removing the excavated
stuff and deposit it as directed with all lead & lift.
46 Construction of granular sub-base (Grade - I) by providing 662.00 Cum 1217.36
coarse graded material, spreading in uniform layers with motor
grader on prepared surface, mixing by mix in place method
with rotavator at OMC, and compacting with vibratory roller to
achieve the desired density, complete as per MoRTH clause
401. (Approach + Merging + Diversion Portion)
47 Construction of Subgrade with approved material obtained 399 Cum 357.01
from borrow pits with all lifts and leads, transporting to site
spreading, grading to required slope and compacting to meet
requirement to MoRTH table 300-2 in layers not more than
200 mm thick as directed by engineer in charge. (Effective
CBR Minimum 8%)
(Approach + Merging Portion)
48 Providing, laying, spreading and compacting graded stone 754.00 Cum 1837.98
aggregate to wet mix macadam (in two layers) specification
including premixing the Material with water at OMC in
mechanical mix plant carriage of mixed Material by tipper to
site, laying in uniform layers with paver in sub- base / base
course on well prepared surface and compacting with vibratory
roller to achieve the desired density, complete as per MoRTH
clause 406. (Approach + Merging + Diversion Portion)
49 Providing and applying Prime coat with Slow Setting 3425.00 Sqm 84.87
Bitumen Emulsion binder (SS- 1) @ rate of 7.5 Kg./10
sq.m. of road surface using Emulsion pressure sprayer
etc.,cleaning the road surface complete including cost of
material labour etc complete as directed by engineer in charge.
(Approach + Merging + Diversion Portion)
50 Providing and applying tack coat with Rapid Setting Bitumen 3425.00 Sqm 22.35
Emulsion binder (RS- 1) @ rate of 2.5 Kg./10 sq.m. of
road surface using Emulsion pressure sprayer etc., cleaning the
road surface complete including cost of material labour etc
complete as directed by engineer in charge.
(Approach + Merging + Diversion Portion)
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
51 Providing and laying 25 mm thick (Compacted ) Semi - 79 MT 4965.75
dence Bituminous concrete on exiting bituminous surface
and using specified graded black trapped machine crushed
aggregate with 5% Bitumen Vg-30 - 60/70 grade bitumen by
Wt of total mix as per MORTH specification including
heating and mixing of asphalt with B.T. chips in continuous
batch mix plant and transporting same at site and speading by
sensor paver finisher and consolidation the same with pair of
tonnes to 10 tonnes vibratory roller to achive desire density
and including flusing the stone dust @0.03 cum/10smt
including cost of required tools , plants, all machineries,
equipment fire wood , oil, kerosene, charges etc. complete.
(Approach + Merging Portion)
52 Providing and laying Dense Graded Bituminous Macadam 161 MT 4745.82
in layers (single layer not more than 75 mm) using BT stone
chips as per MoRTH gradation and specification with Bitumen
Grade (VG 30) for mixing @ 45.00 Kg /MT of total Wt. of
mix i.e (4.50% of total weight mix)including tack coat @
kg/10 smt with Bitumen Emulsion (Rapid setting) and mixing
aggregate & asphalt by batch mix plant and spreading the same
by sensor paver finisher including rolling & consolidation with
10-12 tonne vibratory roller & providing all materials
equipment's tools & plants, fire wood, oil , kerossene,labour
charges , using contractor 's own machinery etc Complete as
directed by engineer in charge as per MoRTH Specification
(Approach + Merging Portion)
53 Hazard Marker Sign :-Providing and fixing sign boards made 4.00 Nos. 3666.30
out of 1.5mm aluminium sheet / 3mm ACP (Aluminum
composite Panel); size 90x30 cms. rectangular as per design of
IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-
4956 and latest M.O.S.T. Specifications; 1.8mtr long stand
post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of 35 x 35 x
3mm; painted with bestquality epoxy coatings in black and
white bends. The details of symbol foreach board shall be as
per theinstruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting.
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
54 Regulatory / Mandatory Sign :-Providing and fixing sign 4.00 Nos. 4618.73
boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite Panel); size 60 cms Dia Circle as per
design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr long
stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per theinstruction of engineer in charge. The fixing
at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for
each leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting.
55 Distance Informatory / Destination Sign :-Providing and 4.00 Nos. 20918.11
fixing sign boards made out of 2mm aluminium sheet / 4mm
ACP (Aluminum composite Panel); size 180x120 cms.
rectangular as per design of IRC-67-2012. Pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint ;
reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of
x 75 x 6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white
bends. The details of symbol foreach board shall be as per
theinstruction of engineer in charge. The fixing at site shall be
in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each
leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
56 Diversion Ahead Sign :-Providing and fixing sign boards 4.00 Nos. 10671.66
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 180x60 cms. rectangular as per design
of IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-
4956 and latest M.O.S.T. Specifications; 3.1 mtr long stand
post (2 Nos.) of 50 x 50 x 5mm / 50NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per the instruction of engineer in charge. The fixing
at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for
each leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting.
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
57 Men at work (2' x 2') sign :-Providing and fixing sign boards 4 Nos. 4962.13
made out of 2.0 mm aluminium sheet / 4 mm ACP(Aluminum
composite Panel); size 60cm x 60cm square as per design of
IRC-67-2012. Pre treated with phospheting process & acid
etching; coated with one coat of epoxy primer and two coats of
best quality epoxy paint ;reflectorised with Micro Prismatic
Grade retro refiectivesheeting of Type-11 as per ASTM D-
4956 and latest M.O.S.T. Specifications; 3.3 mtr long stand
post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required
and frame fabricated from suitable size iron angle of 50 x 50 x
5mm; painted with bestquality epoxy coatings in black and
white bends. the details of symbol or inscription / numerals
for each board shall be as per the instruction of engineer in
charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x
45 x 60 Cms. for each leg.including excavation, curing
etc.complete under the supervision of engineer in charge. A
warranty for 10 years for the Retro reflective sheeting from
original manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the product
offered shall be submitted by contractor. (A) Class-C Type-11
58 Providing fusion bonded Epoxy coating not less than 175 547.00 MT 8729.43
micron thickness and up to 300 micron to reinforcement bars
as per IS-13620-1993/ASTM-775 M including testing of
coating at plant.
For RCC Raft & Open foundation, Piers, Abutment, RCC
side walls, Abutment cap & Dirt wall, Pier Cap, Solid Slab,
Pylon, Approach Slab, Crash Barrier, Wearing Coat,
Retaining wall footing, Retaining wall Stem, Toe wall,
Head wall and Kerb. (MJB + Approach Portion)
59 Providing and casting in situ controlled cement concrete M-20 166.50 Cum. 5198.58
for R.C.C. return as per drawings including centering
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete.(A) Height from 0.0 to 5.0 M.
For RCC Head Wall
60 Type - B, "THRIE" : Metal Beam Crash Barrier (Providing 106.72 Rmt. 4099.59
and erecting a "Thrie" metal beam crash barrier comprising of
3 mm thick corrugated sheet metal beam rail, 85 cm above
road/ground level, fixed on ISMC series channel vertical post,
150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with
1.15 m below ground level, all steel parts and fitments to be
galvanised by hot dip process, all fittings to conform to
IS:1367 and IS:1364, metal beam rail to be fixed on the
vertical post with a space of channel section 150 x 75 x 5 mm,
546 mm long complete as per clause 811) (For Head wall
61 Providing and casting in situ controlled cement concrete M-30 16.01 Cum. 5107.19
for Kerb including formwork curing and finishing, complete
(For Head wall Portion)
62 Providing & laying 22.5 cm thick dry rubble stone pitching on 432.64 Sqm 795.88
side slope on existing earthwork on murrum bed 7.50 cm thick
& filling interstic with murrum & providing Flush pointing in
CM 1:3 etc complete including curing & preparing slope in
Earth work as directed. (For Head wall Portion)
63 Construction of embankment with approved material obtained 14818.86 Cum 177.91
from borrow pits with all lifts and leads, transporting to site
spreading, grading to required slope and compacting to meet
requirement to MoRTH table 300-2.in layers not more than
200 mm thick as directed by engineer in charge. (For Head
wall + Diversion Portion)
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
64 Supplying and fixing reinforced concrete heavy duty non- 473.00 Rmt 3469.26
pressure pipes with collars for culverts carrying heavy traffic
as per IS 458-1991 specifications including setting the pipes in
C.M. 1:2 watering and laying (to level or slopes) of class NP-3
of following internal diameter. (v) 900 mm dia. (For Diversion
65 Providing and laying 20 mm thick mix seal surfacing using 95.00 M.T. 5102.60
spcified graded crushed Black Trap stone aggregates as per
MORTH gradetion using VG-30 bulk bitumen for mixing at
the rate of 5.1 % (51.00 Kg./M.T.) by hot mix process and hot
laid process using paver finisher to the required camber and
grade, including rolling with vibratory roller to achive desier
density including cost of fier wood, oil, Kerosene, labour
charges and hier charges of machinaries etc. complete. (For
Diversion Portion)
66 Men at work (Folding) sign :-Providing and fixing sign boards 2.00 Each 3507.73
made out of2.0 mm aluminium sheet / 4 mm ACP (Aluminum
composite Panel); size 60x60 x 60cm equilaternal triangular as
per design of IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiectivesheeting of Type-11 as
per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr
long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. the details of symbol or inscription /
numerals for each board shall be as per the instruction of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
(For Diversion Portion)
67 Cautionary Warning Sign :-Providing and fixing sign boards 2.00 Each 5077.27
made out of 2mm aluminium sheet / 4mm ACP (Aluminum
composite Panel); size 90 x 90 x 90 cms. equilateral triangle as
per design of IRC-67-2012. Pre treated with phospheting
process & acid etching; coated with one coat of epoxy primer
and two coats of best quality epoxy paint ;reflectorised with
Micro Prismatic Grade retro refiectivesheeting of Type-11 as
per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr
long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as
required and frame fabricated from suitable size iron angle of
35 x 35 x 3mm; painted with bestquality epoxy coatings in
black and white bends. The details of symbol foreach board
shall be as per theinstruction of engineer in charge. The fixing
at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for
each leg.including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 10 years for
the Retro reflective sheeting from original manufacturer & a
certified copy of 3 year outdoor exposure test report from third
party test lab for the product offered shall be submitted by
contractor. (A) Class-C Type-11 Retro Reflective sheeting
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
68 Sign board per Squate Meter :-Providing and fixing sign 5.00 Each 12310.89
boards made out of 2mm aluminium sheet / 4mm ACP
(Aluminum composite Panel); size 1meter x1 meter as per
design of IRC-67-2012. Pre treated with phospheting process
& acid etching; coated with one coat of epoxy primer and two
coats of best quality epoxy paint ;reflectorised with Micro
Prismatic Grade retro refiectivesheeting of Type-11 as per
ASTM D-4956 and latest M.O.S.T. Specifications; 4 mtr long
stand post (2 Nos.) of 75 x 75 x 6mm / 65NB Circular MS
Pipe as required and frame fabricated from suitable size iron
angle of 50 x 50 x 5mm; painted with bestquality epoxy
coatings in black and white bends. the details of symbol or
inscription / numerals for each board shall be as per the
instruction of engineer in charge.The fixing at site shall be in
1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including
excavation, curing etc.complete under the supervision of
engineer in charge. A warranty for 10 years for the Retro
reflective sheeting from original manufacturer & a certified
copy of 3 year outdoor exposure test report from third party
test lab for the product offered shall be submitted by
Chevron sign(A):-Providing
Class-C Type-11 Retrosign
and fixing Reflective
boards sheeting.
made out of 4.00 Each 4681.35
1.5mm aluminium sheet / 3mm ACP (Aluminum composite
Panel); size 60x50 cm as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated with
one coat of epoxy primer and two coats of best quality epoxy
paint ;reflectorised with Micro Prismatic Grade retro
refiectivesheeting of Type-11 as per ASTM D-4956 and latest
M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x
6mm / 65NB Circular MS Pipe as required and frame
fabricated from suitable size iron angle of 50 x 50 x 5mm;
painted with bestquality epoxy coatings in black and white
bends. the details of symbol or inscription / numerals for each
board shall be as per the instruction of engineer in charge.The
fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x
Cms. for each leg.including excavation, curing etc.complete
under the supervision of engineer in charge. A warranty for
years for the Retro reflective sheeting from originaa
manufacturer & a certified copy of 3 year outdoor exposure
test report from third party test lab for the product offered shall
by contractor. (A) Class-C Type-11 Retro Reflective sheeting
70 (For Diversion
Providing and Portion)
fixing guard stone as per I.R.C. type design 842.00 Each 344.08
including white washing etc complete. (ii) Fixing in C.C.
1:5:10 (For Diversion Portion)
AMOUNT PUT TO TENDER (Total Rs.) =
Bill of Quantities
Total Estimated
Sr. No. Item Description Unit Total Amount
Sr. No. Item Description Unit Total Amount
I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent ( Should be written in figures
and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.
* Estimated Amount * Estimated Amount
Put to tender Rs…………………… Put to tender Rs……………………
Deduct……..……..% Add……..……..%
In words………………….……………… In words………………….………………
1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3.GST and Income tax TDS will be deducted at a source while making payments of bills
4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in
S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost
of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all
* (Please strike out whicever is not applicable)
Note: Credit Value of Dismantle material & Credit value of Diversion work Rs. 66,31,132.75 shall be recovered from two
RA Bill of Contractor (RA1 & RA2).
Signature of Contractor.
Deputy Executive Engineer Executive Engineer
Panchayat R&B Sub Division Panchayat R&B Division
Bhanvad Devbhumi Dwarka
Bill of Quantities
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
ONLINE JAHER NIVIDA.pdf
NIT.pdf
02_Schedule-B.pdf
Put to Tender and Not Put to Tender (1).pdf
Put to Tender and Not Put to Tender (2).pdf
Put to Tender and Not Put to Tender (3).pdf
Put to Tender and Not Put to Tender (4).pdf
Put to Tender and Not Put to Tender (5).pdf
Put to Tender and Not Put to Tender (6).pdf
Put to Tender and Not Put to Tender (7).pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .