Special Repairs to Office Of The Assistant Director, Anti-Corruption Bureau Border Unit at Bhuj , Dist :- Kutch. (Including Electrification work) (Revised) (8th Attempt) (SBD)

Name of Work:- Special Repairs to Office Of The Assistant Director, Anti Corruption Bureau Border Unit at Bhuj , Dist :-

Kutch.(Including Electrification work)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, Rupees Four Hundred Ten and

flushing tank etc. including stacking the materials with all lead and lift. Paisa Thirteen Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable Rupees Forty Eight and Paisa

materilas and disposal of unserviceable materials with all lead and lift. Sixty Three Only

Providing and Laying integrated cement based proprietary water proofing

treatment of required thick- ness over the roof including Providing and Applying

water proofing layer of acrylic modified cementa tion composite coating system in

two coats. 1st coat shall be acrylic polymer and cement and second coat shall be

of acrylic polymer, cement and silica sand. The application of both the coats shall

be as per manufacture’s manual at terrace. and 10 mm thick water proofing

cement plaster in C.M. 1:3 and china mosaic fitting and finally finishing the surface

with white cement slurry including treating the vertical surface of the parapet wall

up to 20cms height above finished level of terracing including finishing the top with

joint less water proofing plaster, curing, testing etc. complete. Rate including ten

years performance of guarantee bond to be given on Rs.50/- stamp paper. (No Rupees Five Hundred Sixty

extra shall be paid for variation in thickness.) (a) Applying two coats of Acrylic Five and Paisa Nine Only

based polymer of approved brand & manufacture as per recomodation of

manufacturer over the R.C.C. Slab incl. clearing the surface before treatment.(b)

Finishing the surface with China Mosaic pieces laid on 10mm thick joint less

cement mortar of mix 1:3 (1 cement : 3 coarse sand) admixed with proprietary

water proofing compound conforming to IS :2645 and finally finishing the surface

with trowel with neat cement slurry. (c)The whole terrace so finished shall be

flooded with water for a minimum period of two weeks for curing for final test.All

above operations to be done in order and as directed and specified by the

engineer - in - charge.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated

from M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings.

Rate is inclusive of welding with grinding smooth surface, two coats of Oil paint

and one coat of yellow Zinc primer coat of approved brand only. Oil paint shall be Rupees Seventy Five and

Luxol Enamel paint of Berger Paint india limited. or asian paint apcolite premium Paisa Ten Only

gloss Enamel of asian paint or Dulux premium gloss enamel of dulux paint only

structural steel shall be isi mark only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Rupees Four Hundred Forty

5 following dia. nominal bore tube fittings and clamps including making good the 10.00 Rmt 443.29 Three and Paisa Twenty Nine

wall, ceiling and floor etc. complete.[A] 40 mm. Only

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with

'O' Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or

double 'Y' with door, reducer, coupler single 'T' with door bend, G.I. Slotted Z patti Rupees Two Hundred Forty

6 of 16 Gauge (minimum1.60mm thick) and minimum 6mm dia. U Clamp with 17.50 Rmt 245.74 Five and Paisa Seventy Four

Washer Nut at every 1.50mt. vertical distance including All Labour Charges etc. Only

complete and making good the Wall, Ceiling and Floor.(B Type Pipe)

Providing and fixing in position PVC Cowelvent to pipe 75 mm dia as directed. Rupees Sixteen and Paisa

7 Joints shall be sealed by pipe sealant. 5.00 No. 16.47

Forty Seven Only

Provinding and fixing gun metal check or non return full way WHEEL / HANDLE

Rupees Six Hundred Fifty Six

8 VALVE 40 mm dia. 1.00 No. 656.86

and Paisa Eighty Six Only

Providing and fixing in positon ISI marked Rotational moulded Polyethylene

double layer cylindrical vertical storage tank (IS : 12701 ) water tank size including

making inlet and outlet. Overflow and wash out arrangement with GI connection Rupees Three and Paisa

including using necessary M H for connection etc. Complete with closed cover Ninety One Only

including applying two coats of oil pianting outside the tank etc complete.

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling

with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Rupees Two Thousand Two

10 Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and 2.00 No. 2292.50 Hundred Ninety Two and Paisa

as per the Instruction of Engineer In charge. The Model & Make of Urinal Shall be as per Fifty Only

the Approved Make List of GSPHCL.

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union,

P.V.C water pipe with Connection from Stop Cock to Pillar Tap,PVC Bottle Trap with

connection 32mm dia. C.P. brassa waste coupling with Connection 32mm dia waste Pipe Rupees Three Thousand

11 up to N.T etc. Complete. Rate are inclusive of all matreials, Labour & Necessary Fittings 5.00 No. 3770.44 Seven Hundred Seventy and

etc. Complet as per Detailed Drawings, Specifications and as per the Instruction of Paisa Fourty Four Only

Engineer In charge. Materials used for the above items Must be list approved by

Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary

Rupees Nine Hundred Fifty

Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Instruction

12 5.00 No. 958.79 Eight and Paisa Seventy Nine

of Engineer In charge. Materials used for the above items Must be list approved by

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange .

Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Rupees One Thousand Five

13 Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The 1.00 No. 1521.63 Hundred Twenty One and

Model & Make of Sink Cock Shall be as per the Approved Make List of GSPHCL. Paisa Sixty Three Only

Provinding and fixing CPVC SWR Nahni Trap of the following nominal dia. Self cleaning

design with top jali and stainer including cost of cutting and making good the walls and Rupees Three Hundred Fifty

14 floors 100mm inlet and 50mm outlet. Including 150mm x 150mm stainless steel jali. 7.00 No. 350.00

Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Rupees One Thousand Eight

per the Instruction of Engineer In charge. The Model & Make of Shower with Arm and Paisa Sixty Five Only

Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Rupees Seven Hundred Fifty

16 Specifications and as per the Instruction of Engineer In charge. The Model & Make 4.00 No. 750.62

and Paisa Sixty Two Only

of Angle Cock Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications Rupees Six Hundred Thirty

and as per the Instruction of Engineer In charge. Materials used for the above Five and Paisa Fifty One Only

items Must be list approved by G.S.P.H.C.L.

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of

all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Rupees One Thosand One

18 Specifications and as per the Instruction of Engineer In charge. Materials used for 4.00 No. 1130.52 Hundred Thirty and Paisa Fifty

the above items Must be list approved by G.S.P.H.C.L. Two Only

Providing & Fixing 15mm Two way Bib Tap with Wall Flange. Rate are inclusive of

all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Rupees One Thosand Four

19 Specifications and as per the Instruction of Engineer In charge. Materials used for 5.00 No. 1496.39 Hundred Ninty Six and Paisa

the above items Must be list approved by G.S.P.H.C.L. Thirty Nine Only

Providing and fixing chromium plated brass half trun flush cock of approved quality Rupees Two Hundred Sixty

20 including fixing in pipe line etc. complete.(iii) 25 mm dia. 5.00 No. 261.16

One and Paisa Sixteen Only

Providing and fixing fire extiguishing grade FRP Fiber Glass reinforced sheet

thickness of 3mm avg. On roof with gel coat of required colour and desing and Rupees One Thousand Twelve

21 sheet to be water proof weather proof and mild acid / alkali resistance including 89.00 Smt. 1012.30

and Paisa Thirty Only

fixing with clamps bolts nuts etc.complete

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Constructing brick masnory chamber for under ground C.I.Inspection chamber and

bends with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement

mortar 1:5,RCC top slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia.

steel @ 15 c/c and R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4-

stone aggregates 20mm nominal size) foundation cocrete 1:5:10 inside laster

Rupees Three Thousand

mm th. c:m 1:3 finished smooth with a floating coat of neat cement on walls & bed

22 5.00 No. 3793.18 Seven Hundred Ninty Three

concrete etc. complete. Rate are also inclusive of outside plaster 15mm thick in

and Paisa Eighteen Only

C.M 1:3 from top of chamber and all side upto 45cm deep below ground level (I)

inside dimensions 455mm x 610mm and 450mm deep for Single or multi purpose

pipe line. Rate Also Inclusive RCC Frame with cover MD 10 ton (Rubber mould

Finish) Inner Size 600 x 450mm with all necessary fittings

Providing and Fixing S.W. Gully trap without C.I.grating brick masonry chamber &

Rupees One Thousand One

water tight C.I.cover frame of 300mm x 300mm size (inside) with standard weight

23 3.00 No. 1176.94 Hundred Seventy Six and

(I) square mouth trap 150mm x 100mm size of 'P' or 'S' type. Paisa Ninty Four Only

Total Amount ….A

Total Amount ….A

Elecatical Work:-

Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm

copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated

FRLS wire for earth continuity in exisiting FIA approved ISI mark medium class

white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected on/in Brick Wall / slab along with continuous G.I. fish

Rupees Three Hundred

24A wire to draw wires and laid in approved manner complete with approved make 5/6 10.00 Point 345.00

Fourty Five Only

Amp. ISI make modular type switch and accessories mounted in 20 G. G.I.

company fabricated metallic box covered with appropriate front plate modules

erected flushed with wall / ceiling with necessary modular lamp holder / modular

ceiling rose / HD Connector as directed for concealed wiring. Light point. Cat.-II.

Length of point wiring must not increase than 10 mtr. For that necessary switch

boards and their locations must be finalised before execution by agency otherwise

payment will not be done for extra long point. (For future extention, if required,

agency has to erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item) [This item include

cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box,

MCBDB & box cutting plaster finishing for modular plate without any gap]

[conductor resistance should be as per IS:8130/1984]

For Fan Point (with 6 A. Modular type switch and two module hum free EME Five

Rupees Four Hundred

24B step type Electronic fan regulator both having ISI mark) Cat.-II [conductor 2.00 Point 499.00

resistance should be as per IS:8130/1984] Ninety Nine Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Caping) having double-

locking arrangement with grooves, trunking of size not below 12.5 mm in height as

25 per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly 100.00 Mtr. 30.00 Rupees Thirty Only

sealed in joint & erected on wall / ceiling of following size. For 25 mm

Providing and erecting Medium Class FIA approved and ISI mark white colour

(embossed) RIGID PVC PIPES of following size complete erected with necessary

26 PVC fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / 30.00 Mtr. 23.00 Rupees Twenty Three Only

ceiling along with continuous fish wire to draw mains with necessary fittings and

junction boxes for following dia. (a) 20 mm. dia.

Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV

grade in exisitng FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to be

erected on/in brick wall / slab along with continuous G. I. fish wire to draw mains

27A laid in approved manner complete with FRLS PVC insulated wire for earth 80.00 Mtr. 44.00 Rupees Fourty Four Only

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (Conductor resistance should

be as per IS:8130/1984)

2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm.

FRLS copper multi stranded conductor for earthing as per standard colour

27B code.(In Existing Pipe) (Conductor resistance should be as per IS:8130/1984) 40.00 Mtr. 59.00 Rupees Fifty Nine Only

Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following Rupees Thirty and Paisa

sizes. Ninety Five Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of

225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of

Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed

Brand Terminal Size: 70mm X 100mm length, Terminal Should be made from

inner pipe for that pipe must be pressed and gave rectangular shape so its work

as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut

bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal. Rupees Seven Thousand

total minimum Weight(approx.) of earth electrodewith inside conductive material Twenty Five Only

minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

(C) Back fill Compound:- Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

400 mm depth and Cover should be heavy duty cast iron with required size of

mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM

has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

For above earthing additional charges for boring in hard rock soil (by breaker) &

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along with Rupees Two Hundred

photographs) Seventy Six Only

Providing & erecting Switch board for Computer or electric apparatus consisting

of following items in single board erected on Metal board with 3 mm thick PC

(Polycarbonet) / Acrylic sheet erected as directed. 2 no. 6/16 Amp. universal Rupees Nine Hundred

Socket, 2 nos. 16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 Seventy Seven Only

pin Plug. For Computer power Supply board. Cat.-II.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and erecting following type of Modular Type Accessories mounted with

20 G company fabricated metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with necessary connection. As Rupees Three Hundred

desired by Engineer in charge. Electronic hum Free steps EME Fan regulator Twenty Two Only

Providing & erecting following type of Modular Type Accessories with necessary

33A connection. As desired by Engineer In charge. 20.00 Each 26.00 Rupees Twenty Six Only

(1) 6 Amp. SP one way switch, Cat.-II

33B 16 Amp. SP one way switch, Cat.-II 2.00 Each 49.00 Rupees Fourty Nine Only

6/16Amp. Universal socket, Cat.-II

33C 2.00 Each 78.00 Rupees Seventy Eight Only

33D 6 A socket, Cat.-II 10.00 Each 40.00 Rupees Fourty Only

Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat

sink shall be made from Aluminum exttusion having enough strength (Sample

must be approved by EIC) With Polycarbonate diffuser With Following

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 240 VAC, 50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

Rupees Three Hundred

34 (9) CRI : Min/ 80 Ra 5.00 Each 370.00

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit

yrs free replacement Guarantee for complete Fixture) Approval will be given strictly

subject to item specification.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to

6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep:

1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating,

(12) Canopy: Two Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance Rupees One Thousand Nine

35 )as per is 1709-1984, Aluminium body premium quality, Branded make,(14) Down 2.00 Each 1929.00

Hundred Twenty Nine Only

road: up to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16)

core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to

mechanical parts. (Agency has to erect safey wire with ceiling fan and checked

with EIC) (OEM has to approved model as per tender specification and tested at

ERDA) (Necessary test reports should be submitted strictly at the time of approval.

Sample approved by EIC subject to above specification only)

Supplying and erecting KITKAT pattern porcelain cutout with base of following Rupees Two Hundred

36 current capacity erected on existing block board. (v) 100 A. 500 V. 3.00 Each 276.00

Seventy Six Only

Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to

Amp. suitable to operate on 240 V A.C. system and having breaking capacity 10 Rupees One Hundred

37 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark 12.00 Each 111.00

Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load

Rupees Three Hundred

38 (C curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. 4.00 Each 327.00

Twenty Seven Only

box having following capacity. For 40 Amp. DP

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Seven Hundred

39 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 1.00 Each 730.00

having following capacity [c] 63 Amp. FP

Providing and Erecting Approved make ISI mark ELCB confirming to

IS:12640/1988 having serial number printed on it and having sensitivity of 30 mA

and breaking capacity of 10 KA and suitable for 240 V, 50 Hz having characteristic Rupees Two Thousand Two

of quick acting & Tripping with all advance feature & do not incorporate any Hundred Thirteen Only

electronic component (mounted in MCBDB) Suitable for operation on single phase

240 Volt max rating of (i) For 40 Amp. DP.

Providing and Erecting Approved make ISI mark ELCB confirming to

IS:12640/1988 having serial number printed on it and having sensitivity of 30 mA

and breaking capacity of 10 KA and suitable for 240 V, 50 Hz having characteristic Rupees One Thousand Nine

41 of quick acting & Tripping with all advance feature & do not incorporate any 1.00 Each 1950.00

Hundred Fifty Only

electronic component (mounted in MCBDB) Suitable for operation on single phase

240 Volt max rating of (i) 25 Amps.DP ELCB

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG

sheet steel duly powder coated with gasket, dust & vermin proof bakelite shield

two earthing terminals for following type of RCCB, RCCB + MCB [a] For 2 pole Rupees Two Hundred

42A [Same company metal box used as MCB / ELCB used with earthing terminal 5.00 Each 272.00

Seventy Two Only

with necessary Numbering / marking with oil Paint by painter]

For 4 Pole [Same company metal box used as MCB / ELCB used with earthing Rupees Four Hundred Fourty

42B terminal with necessary Numbering / marking with oil Paint by painter] 1.00 Each 442.00

Providing, erecting, Fabricating the M.S. structure as per requirement of site as

per structure design Including proper size approved by EIC of M.S. angles, flats,

bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete

with cutting, welding, grinding and finishing duly painted with Asian/Nerolac make

43 premium quality oil paint and true care red oxide metal primer,asian paint make 10.00 Kg. 77.00 Rupees Seventy Seven Only

with erection on site as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of square pipe end

must be closed with M.S plate welding. Payment will be done on KG as per Actual

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm

outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and

required size and length suitable for 76.5 / 80 mm. required size of pole top or pipe

in pipe surface for terrace as per instruction of EIC or wall bracket as per

instruction of EIC having nuts and bolts for fixing the brackets and having spread

of Upto 0.50 mtr. length with suitable rise as per site condition and suitable welded Rupees Four Hundred Eighty

stiffner reducer and nipple with check nut complete painted with one coat of yellow Seven Only

zinc and two coats of alluminium paint for Single arm bracket suitable for pole or

terrace as per design given by EIC (a) For single arm bracket. (Jindal / Asian /

Tata / Surya Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica

Only) (Test certificate to be submitted)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light

Luminaire with total consumption of Max. 45 W with single piece die cast

aluminium housing, high power LED shall be mounted on high quality metal core

PCB with extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture should be suitable

for pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines

with LED module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light distribution. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided Rupees Three Thousand

with high quality driver for protection against high and low Voltage cut Off, Five Hundred Twelve Only

opertional for high amibient and high humid envirnoments, THD of driver should be

less than 10% and P.F > 0.95. Also the Fixture should meet the following technical

criterias Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg,

surge immunity level at least 4 KV integral and 10 KV non integral

The Separate Potted driver should have over current, over voltage protection,

short circuit protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 4yrs free replcement

Guarantee for complete Fixture)

Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI

46 marked copper wires of following size to be erected as directed. 3 core x 1.5 80.00 Mtr. 44.00 Rupees Forty Four Only

sq.mm. PVC insulated round copper wire ISI mark.

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable

for 1100 volt to be laid 90 cms. Under ground or to be laid 90 cms. Under ground

Rupees Two Hundred Sixty

47 or to be laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp or in 50.00 Mtr. 267.00

existing DWC pipe underground or road crossing or floor of following size of

cables.For 4 core x 2.5 sq.mm.

Providing & fixing double compressed heavy duty flange type brass cable gland

with rubber ring for P V C insulated armoured cable complete with outgoing tails,

48 5.00 Each 43.00 Rupees Forty Three Only

insulating tape etc. For following size cables. For 2 to 4 core x 2.5/4.0 Sq. mm

(Sigma, MCI, Comet Make Only)

Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & connected to

49 80.00 Each 8.00 Rupees Eight Only

switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for Rupees One Hundred Thirty

control panel, relays, power switchgears, motor starters & control wiring) with Four Only

required size of copper lugs, nuts and bolts if required. One wire 16.00 sq. mm

Supplying and fixing radium sticker or Painting the number and words for

inventory Identification on erected fittings / equipment’s or Such accessories

(MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as may required with

good quality of enamelled paint or fade proof, weather proof, waterproof high

51 50.00 Each 2.00 Rupees Two Only

quality vinyl radium sticker for indoor / outdoor application as directed by engineer

in charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by EIC as per site

Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with grooving as

52 200.00 Sq. Inch 3.00 Rupees Three Only

Dismantling the existing light, fan, bell, independent plug point, wiring with mains of

all types along with accessories etc. complete and handed over to dept.

53 50.00 Point 1.00 Rupees One Only

Dismantling the existing switchgears, DB and Busbar of any size complete with /

54 10.00 Each 8.00 Rupees Eight Only

without board or angle iron frame.

S.I.T.C. of single phase submersible pump set suitable for 100 mm size or

more dia bore well having motor capacity and discharge as under with necessary Rupees Seventeen

55 panel box. Lifting and Lowering taken extra (b) Motor rating 1.5 HP (16 stage) 1.00 Each 17433.00 Thousand Four Hundred

pump having capacity of 50 LPM at 60 mtr head suitable for 32 mm dia. Thirty Three Only

Lifting of submersible motor pump set complete with required No .& size of

casing pipes by means of proper chain pulley block and pipe. wrenches. Job Rupees One Thousand Six

includes stacking of pipes chronologically after due checking of threads (A) Up to Hundred Ninety Five Only

Supplying & erecting approved make motor control cubical panel (Direct - on -

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and outside

with hinged doors and locking, arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for

R-Y-B phases, overload relay, Automatic water level controller, Ammeter, Rupees Seven Thousand Six

Voltmeter each with two way selector switch incoming, wires duly socket crimped, Hundred Forty Six Only

main contactor & overload relay, start - stop push buttons, to be erected on angle

iron frame grouted on wall as directed. The isolator, overload relay & contactors

will be of L & T, Siemens or BCH make only. (A) DOL Up to 5 HP.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

58 Submersible copper cable approved make of following Size. [c] 3 Core x 1.5 80.00 Mtr. 65.00 Rupees Sixty Five Only

Providing & fixing Water proof straight Joint in PVC insulated flat flexible copper

Rupees Two Hundred

59 cable by using insulating material, water proofing material, & making the joint 1.00 Each 220.00

complete. (A) Up to 10 Sq.mm

Supplying and erecting Heavy duty clamp made from 4" x 1.5" iron strip suitable Rupees One Hundred Forty

60 for column pipe 1.5" to 2" length.(A) 40 mm (1.5") dia pipe 2.00 Each 143.00

Providing & Erecting Bore well cap [a] Up to 200 mm dia. Rupees Four Hundred

Twenty Four Only

Supplying of following size of STANDARD UPVC column pipe with coupler and

wire lock [B] 32 mm dia (Ashirvad, Astral or equivalent make and model Rupees One Hundred

approved by EIC only with ISI mark) Seventy Eight Only

Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long,

pump guard set, starter pipe Rubber ring for submersible pump & UPVC column Rupees Four Hundred Fifty

63 pipe as directed by Engineer-in-charge with necessary plumbing as desired. [B] 32 1.00 Per Set 458.00

Supplying and erecting Water tight M.S.Box of size 20 x 15 x 15 cms. to erect

suitable kitkat fuse / MCB to be . erected on polished wooden board inside the box

with hinged/sliding door with rubber rings and erected on pole with suitable pole Rupees Two Hundred Thirty

clamp, all duly painted with one coat of red oxide and two coats of paints. (Cost of Two Only

Fuse / MCB shall be taken extra)

SITC of 4 Zone Fire Alarm Control Panel, with 16X2 Character LCD Display,

complies with UL - 864 and NFPA-72,Standards. Approval: UL-Listed Optional:

1) Provision to connect zone wise sounder (RE-25ZS) provided in a seperate

2) Provision to connect zone wise relay (RE- 25ZC) provided in a seperate Cabinet Rupees Nineteen

65 3) provision to connect repeater Panel through RS-485 with RE- RP Series. 1.00 Each 19321.00 Thousand Three Hundred

(Including Five year free maintenance with guarantee) [make and model Twenty One Only

approved by EIC as per specification) [Test certificate must be submitted]

SITC of ABS Manual Call Point with key – break / Re settable type. (Morley /

GST/ Raval make and model approved by EIC as per specification) [Test Rupees Eight Hundred

certificate must be submitted] Twenty Seven Only

SITC of ABS Sounder - 24V, 95-105 db APPROVAL: CE Mark (Morley / GST/

Raval make and model approved by EIC as per specification) [Test certificate must Rupees Eight Hundred

be submitted] Twenty Seven Only

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for

68 control panel, relays, power switchgears, motor starters & control wiring) with 150.00 Mtr. 16.00 Rupees Sixteen Only

required size of copper lugs, nuts and bolts if required. For One wire 1.50 sq. mm

Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having

capacity 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to

IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can Height 530 mm,

Diameter 150 ± 10mm, Discharge Time 24 Sec, Controllable discharge

mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class

A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction :

Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy

Powder coating, External Coating - Pure Polyester Powder coating (UV

Resistant),Brass forged CE Marked valves with NRV & Auto Safety Release

with safety Pin is of SS material, Made up from 1.6mm thick sheet, Rupees One Thousand Nine

69 Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:- 3.00 Nos. 1991.00

Hundred Ninety One Only

Gross Weight 8.9 Kg, Empty Weight 2.9 Kg, 1. Necessary certificate & and

guarantee must be attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling

period must be of 3 Years. Following Printed marking on equipment must be

required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX, CEASEFIRE)

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire

Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism

fitted with 1 Meter Wire Braided Hose & Electrical non-conductor Polyethylene

Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time

12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically

started Fire, Fire Rating 55B, Internal coating is not applicable & External coating

is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and Explosives Safety

Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm,

Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance Weight:- Rupees Six Thousand Five

Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate & and Hundred Twenty Six Only

guarantee must be attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed marking

Manufacturing Date and Expiry Date must be mention on Extinguisher 4. Refilling

period must be of 5 Years. Following Printed marking on equipment must be

required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No,

Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX, CEASEFIRE)

Total Amount ….B

Total Amount ….B

Total Amount ….A+B

Total Amount ….A+B

I/c Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.