Loading
Loading…
Loading…
Tender Value
₹9.9 Cr
EMD Value
₹10.9 L
Closing Date
2 Jul 2026, 1:00 pm
Similar tender results from the same govt authority in the past 3 years.
CME
AOB, 2nd Floor, CME Chambers
Design, Supply, Installation, Testing and Commissioning of entire pipeline System from MPH to S-4 and from S-4 Pump House to connected branches sprinkling System and automation using of Self dynamic Hydro Control Val
2026_VPT_280670_1
64/2026-27/IMEE/MOF/FOF/ET/F42 Dt.12.06.2026
Open Tender
Machineries/ Mechanical Engg Items
210 days
VPA
please refer to the tender documents
2 documents required · 2 mandatory
₹1,770
Yes
₹10.9 L
Yes
AOB, 2nd Floor, CME Chambers
12 Jun 2026
12 Jun 2026
3 Jul 2026
12 Jun 2026
2 Jul 2026
12 Jun 2026
19 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | PART A- Manufacture,Supply of MS pipe line of 300mm dia 10 mm thickness of required lengths conforming IS3589 and IS1239 to site of work, including transportation loading, unloading, stacking at a place shown by (painting with two coating red oxide (Anti corrosive) paint etc as required as on directed the Engineer-in-charge complete. All labour and materials. 300mm dia pipe for Delivery pipe line from MPH to Orrissa Weigh Bridge for Incoming water to S4 PH. | 91,160.73 | Kgs | - | - |
| 1.02 | 300mm Dia For Delivery Pipe line From S4 Pump House to Left & Right Branches. | 45,580.37 | Kgs | - | - |
| 1.03 | 200mm Dia For Delivery Pipe line to Branches. | 73,875.71 | Kgs | - | - |
| 2 | Cost of MS Flanges including cost of Bolts, Nuts, Rubber Packing etc., complete and flange thickness confirming to IS:7322 - 1985 and flange dimensions confirming to IS:1538-1993 excluding Cost of MS barrel including cost and conveyance to site, excluding Taxes etc., complete. (Rate per each Flange). 300mm dia.M.S.Flange with Bolt, Nut, Washers and Rubber insertion | 8 | Nos. | - | - |
| 2.02 | 200mm dia.M.S.Flange with Bolt, Nut, Washers and Rubber insertion, | 16 | Nos. | - | - |
| 2.03 | 80mm dia.M.S.Flange with Bolt, Nut, Washers and Rubber insertion | 116 | Nos. | - | - |
| 3 | Providing Apoxy resin based enamel zinc chromate primary coat (Two coats) over a MS Pipes both inside and outside which includes self-priming coat (diluted with chemical upto 30%), first coat of Zinc chromate primary coat and second coat of Apoxy resin based with a time interval of 6 to 8 hrs for two coats at 60° c of having density upto 1.26±0.02 gm/cm³ , ph value 8 - 9.5 ,specific gravity 1.1 and recomended DFT of 60 to 80 microns with contract ratio of 96% and including cost and conveyance of all materials and labour charges as per SS and as directed by the department officers. 300 mm dia for delivery pipe line from MPH to Orrissa Weigh Bridge for incoming water to S4 Pump house. | 1,410 | M2 | - | - |
| 3.02 | 300 mm dia for delivery pipe line from S4 pump house to left & right | 705 | M2 | - | - |
| 3.03 | 200 mm delivery pipe to Branches | 1,116 | M2 | - | - |
| 3.04 | 80 mm for 29 Branches(1X6 Mtrs Long) | 43.67 | M2 | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.74 MB
BOQ_327515.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid