Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance HOSHANGABAD M P | HOSHANGABAD | MADHYA PRADESH | Admitted-Finance |
| 4 | Admitted-Finance OPP ANAND TALKIES SITABULDI NAGPUR 440012 | NAGPUR | MAHARASHTRA | 440012 | Admitted-Finance |
| 5 | Rejected-Technical | Rejected-Technical Reg. Certificate not submitted and no valid Exp. certificate |
Tender Value
Refer Docs
EMD Value
₹14,290
Closing Date
27 Jan 2021, 2:30 pmClosed
AGM(EM), FCI, RO, Hyderabad
AGM(EM), FCI, RO, Hyderabad
Supply, Installation, Testing and commissioning of 16Mtr High Mast alongwith with LED Flood light fittings at FSD Sanathnagar for the year 2020-21.
2021_FCI_610562_1
ENGG/EM/NIT/03/2021 dated 18.01.2021
Open Tender
Electrical Works
Works
60 days
FSD SANATHNAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
FCI RO HYDERABAD
₹14,290
11 Feb 2021
18 Jan 2021
28 Jan 2021
18 Jan 2021
27 Jan 2021
18 Jan 2021
Amount
Item Description
Supply of 16 meter High Mast shaft in two section,with base dia.410 mm and top dia 150 mm with plate thickness bottom 4 mm and top 3 mm, PCD 490 mm with the base plate of 570 mm , hot dip galvanised and suitable for wind velocity as 55 m / sec.as per IS:875(Part-III) with raising and lowering system comprising head frame,2 steel wire rope 6 mm dia.(AISI 304, 7/19 construction) trailing cable,( Copper 5 CORE 2.5 sq mm EPR Insulated PCP Sheathed ) double drum SWL (750 Kg) of winch ( integral Motor 1 HP 6 Pole single speed, ) galvanised lantern carriage arrangement suitable for 8 luminaries symmetrically and its control gear boxes and lighting. The high mast shall have an integral power tool install inside the base compartment for its operation. (Market Rate) (Surya / Valmont / Bajaj / Crompton)
Supply and fixing of foundation bolt manufactured from special steel along with nuts, washers, anchor plate and common templates. (Market Rate)(Surya / Valmont / Bajaj / Crompton)
Supply installation, testing and commissioning of outdoor stand mounted feeder pillar with 63 Amp. TPN MCB incomer, single dial timer, 45 ATP contactor for the automatic switching of luminaries, power tool control with 2 nos. 9 Amp. contactors and raise lower push button, incoming 35 Sq.mm and outgoing 16 & 2.50 Sq.mm terminals etc. as reqd. Panel should be erected in min. 14 gauge CRCA sheet Box with supporting angels, self-lock, gasket and slanting top erected in CC foundation in an approved manner. (Market Rate)
Supply of Single dome aviation obstruction lights with LED lamps. Bajaj cat no BJAV 302 LED/Havells /PHILIPS (Market Rate)
Supply of 200 watt LED Flood light luminaries of Area lighting with energy saving Main Housing, Powder coated pressure dia cast aluminium housing, Front Clear toughened glass, Suitable secondary lens for better light distribution Gear : Electronic constant current driver of min. 85 % effeciency Internal wiring : Teflon insulated Cu Conductor. LUMOS - 200, Operating Voltage : 140 V - 270 V, Rated Voltage & Frequency : 240 V, 50 Hz, AC with IP 66 protection as reqd. CAT NO 200 watt AMAZE LED flood light fitting Bajaj cat no BJFL 200W LED I /(Havells / Bajaj / Philips Make.)
Construction of suitable shallow foundation with 1:2:4 concrete for the 16 Mtr. high mast considering the safe soil bearing capacity at size as 10 T / sq. meter at 2 meter depth with all materials and labours. (Market Rate)
Erection of 16 Mtr. high mast with the help of suitable tools and tackles, wiring of luminaries with all wiring material and labour as reqd. (Market Rate)
Supplying of XLPE insulated & PVC tape inner sheathed aluminium conductor armoured cable of 1.1 KV grade of size 4 x 16 Sq. mm. confirming to IS:7098 (Part- I) 1988 with up to date amendment as required. (Market Rate)
Providing, laying and fixing following dia C.I. pipe (medium class) in ground complete with C.I. fittings including trenching (75 cm deep) and re-filling etc as required. (Market Rate)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sqmm. (DSR 2018 It. No. 7.1.1)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sqmm. (Clamped with 1mm thick saddle). (DSR 2018 It. No. 7.7.1)
Supplying and making end termination with brass compression gland and aluminium lugs for 4 x 16 sq. mm. size of PVC sheathed XLPE aluminium conductor cable of 1.1 KV grade as reqd. (DSR 2018 It. No. 9.1.33)
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (DSR 2018 It. No. 5.6)
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. (DSR 2018 It. No. 5.14)
M/s.VENKATESWARA ELECTRICALS
GENERAL ENGINEERS
NEERAJ KUMAR JAIN
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .