Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC JUBARAJNAGAR BABURBAZAR IRANI KAILASHAHAR UNAKOTI TRIPURA PIN 799281 | UNAKOTI | TRIPURA | 799281 | ₹1.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.8 L+₹3,072.88 (1.69%)Rejected-AOC | ₹1.8 L+₹3,072.88 (1.69%) | L2 | Rejected-AOC L2 |
Tender Value
₹1.9 L
EMD Value
₹3,725
Closing Date
13 May 2026, 3:00 pmClosed
O/o the EE(Agri), North, Dharmanagar, North
O/o the EE(Agri) North, Dharmanagar North
Repairing GCI Sheet roofing Dolugoan SubSeed Store at Dologoan under Gournagar Agri SubDivision Unakoti District
2026_AGRI_72552_1
01/EE/AGRI/N/2026-27
Open Tender
Civil Works
Percentage
15 days
Dologoan under Gournagar Agri Sub Division Unakoti
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹3,725
O/o the EE(Agri), North, Dharmanagar, North
5 Aug 2026
6 May 2026
13 May 2026
6 May 2026
13 May 2026
6 May 2026
6 May 2026 - 12 May 2026
12 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repairing | |||||
| 1.01 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | - | Sqm | 9.4 | - |
| 1.02 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and up to a lead of 50 m etc complete as per direction of the Engineer- in-charge. | - | Sqm | 92.8 | - |
| 1.03 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sqm and below. | - | Nos | 211.6 | - |
| 1.04 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area beyond 40 sq cm. | - | Cum | 2,563.3 | - |
| 1.05 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement :3 fine sand : 6 graded stone aggregate 20mmnominal size). | - | Nos | 190.1 | - |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position (Karai wood). | - | Cum | 1,06,388.3 | - |
| 3 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass (weight not less than 10ks/Sqm) panes including black enamelled ISI marked MS butt hinges with necessary screws. Local Teak wood (30 mm thick) | - | Sqm | 2,914.3 | - |
| 4 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever requiredand as per direction of Engineer-in-charge. 11.22.3 0.50mm thickness. | 1 | Sqm | 939.2 | ₹938.26 |
| 5 | Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20
micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have
protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum
to avoid scratches while transportation. The sheet shall be fixed using self-drilling /self-tapping screws with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610mm: 11.23.3 0.50mm thickness | - | Mtr | 517.9 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_73835.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.35 MB
BOQ_73835.xls
BOQ • 0.25 MB
DNITDologoan.pdf
Tender Documents • 3.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .