Construction of New Guard room for SRP at New sachivalay, Gandhinagar

MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT

Quantities Estimated rates Total Amount

Quantities Estimated rates Total Amount

Item Estimated According to

Items of works Unit

No but may be Estimated

more or less In Figure In words Quantities

Excavation for foundation Upto 1.50 m depth including sorting out and stacking One hundred twenty

1 373.00 of the useful materials and disposing off the excavated stuff up to 50 metre 123.13 three rupees and Cmt

lead. (A) loose or soft soil. thirteen paise only

Excavation for foundation from depth 1.50 m to 3.00 m including sorting out One hundred seventy

2 212.00 and stacking of the useful materials and disposing off the excavated stuff up to 170.50 rupees and fifty paise Cmt

50 metre lead. (B) Dense or Hard soil. only

Excavation for foundation from depth 3.00 m to 5.00 m including sorting out One hundred eighty

3 15.00 and stacking of the useful materials and disposing off the excavated stuff up to 182.94 two rupees and ninety Cmt

50 metre lead. (B) Dence or hard soil. four paise only

Filling available excavated Earth (Excluding Rock) in trench plinthside of One hundred thirty six

4 456.00 foundation etc. in layer not exceeding 20 cm in depth consolidation each 136.92 rupees and ninety two Cmt

deposited layer by ramming and watering etc. complete. paise only

Filling in plinth with sand under floors including watering, ramming Four hundred eighty

5 67.00 consolidating and dressing etc. complete. 481.70 one rupees and Cmt

seventy paise only

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm Two hundred seventy

6 45.00 Thickness including watering, ramming and consolidating etc. complete. 277.14 seven rupees and Cmt

fourteen paise only

Anti-Termite System:Providing and laying of permanent piping technology anti-

termite treatment before flooring work by installing LLDP (Low linear density

polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having working pressure of

2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP

pipe shall be installed at the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr.

c/c distance (adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level, entering One hundred thirty

7 856.00 into a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into 134.33 four rupees and thirty Sqm

junction box and the loops shall terminate in junction boxes & test every three paise only

junction during injecting chemicals for termite control treatment. The anti

termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be

injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water at

the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line

plan for piping system and junction boxes dully approved by Engineer-in-Charge

with bond of 5 year warranty.(i)Anti Termite chemical injected area (Chemical

injecting incl. labour cost)

PCC M-150 : Providing and laying controlled cement concrete M-150 and curing

Four thousand forty

complete including the cost of form work but excluding the cost of

8 72.00 4049.22 nine rupees and Cmt

reinforcement for reinforced concrete work in P.C.C below foundation footings,

twenty two paise only

base of columns and mass concrete.

Foundation M-250 : Providing and laying controlled cement concrete M-250 and Four thousand four

curing complete including the cost of form work but excluding the cost of hundred nineteen

reinforcement for reinforced concrete work in foundation footings, base of rupees and seventy

columns and mass concrete. paise only

Column M-250 : Providing and laying controlled cement concrete M-250 for Seven thousand five

curing complete including cost of formwork but excluding the cost of hundred forty two

reinforcement for reinforced concrete work in Columns, pillars, posts and rupees and thirty one

struts For All Floor Level. paise only

Grade Slab M-200 : Providing and lying controlled concrete M-200 and curing Four thousand six

complete including cost of form work but excl. reinforcement for reinforced hundred fifty six

concrete work in Grade Slabs rupees and fifty four

Slab M-250 : Providing and lying controlled concrete M-250 and curing Six thousand four

complete including cost of form work but excl. reinforcement for reinforced hundred twelve rupees

concrete work in Slabs For All Floor Level. and ninety eight paise

Beam M-250 : Providing and lying controlled concrete M-250 and curing Five thousand eight

complete including cost of form work but excl. reinforcement for reinforced hundred seventy five

concrete work in Plinth Beam & Beams For All Floor Level. rupees and fifty three

Lintel M-250 : Providing and lying controlled concrete M-250 and curing Seven thousand seven

complete including cost of form work but excl. reinforcement for reinforced hundred sixty two

concrete work in Lintel For All Floor Level. rupees and fifty two

Chajja M-25 : Providing and lying controlled concrete M-250 and curing Six thousand six

complete including cost of form work but excl. reinforcement for reinforced hundred sixty four

concrete work in Chajjas For All Floor Level. rupees and fourteen

Sill/Coping M-250 : Providing and lying controlled concrete M-250 and curing Six thousand four

complete including cost of form work but excl. reinforcement for reinforced hundred two rupees

concrete work in Sill / Coping For All Floor Level. and forty three paise

Staircase M-250 : Providing and lying controlled concrete M-250 and curing Five thousand nine

complete including cost of form work but excl. reinforcement for reinforced hundred twenty one

concrete work in Staircase For All Floor Level. rupees and four paise

Providing and laying TMT Bar Fe 500D reinforcement for RCC work including Seventy seven rupees

18 50910.00 bending, binding and placing in position complete for all floors. 77.29 and twenty nine paise Kg

Brick work using common burnt clay conventional building bricks having Four thousand two

crushing strength not less than 35 Kg/Sqm. in Foundation and Plinth in cement hundred fourteen

mortar 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete. rupees and nine paise

Brick work using common burnt clay conventional building bricks having Four thousand five

crushing strength not less than 35 Kg/sqcm. in Super structure for All floors in hundred two rupees

cement mortar 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete. and eighty one paise

Half brick masonry in common brunt clay building bricks having crushing

Six hundred eighty five

strength not less than 35Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse

21 115.00 685.79 rupees and seventy Sqm

sand ) in foundation and plinth (B) Conventional

nine paise only

Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

Seven hundred seventy

slope and to be tempered to bring mortar creme out upto surface using white

22 222.00 779.70 nine rupees and Smt

cement including rounding off junctions and extending them upto 15 cm along

seventy paise only

the wall,clearing with water and oxalic acid etc. as directed.

Window (Two Track) : Providing and fixing of Domal series Two Track Partly Fix

and Partly Sliding Window with colour anodized Section Frame of size 82.5 x

x 1.7 mm @ 1.947 Kg / Rmt and Three Track Bottom/Top of size 80 x 45 x

Four thousand eight

mm @ 1.762 Kg / Rmt and Slidding Shutter of size 65 x 27 x 1.5 mm @ 0.951 Kg

hundred sixteen

23 11.00 / Rmt with 5mm thick Coated Glass with Rubber gasket with help of Glazing Clip 4816.59 Sqm

rupees and fifty nine

of size 26.7 x 15 x 1.2 mm and Inter clip using with of size 38.7 x 28.5 x 1.4 mm

and using hardware material, clot, bearing, lock and Labour etc. complete as

approved by Engineer In Charge.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60 mm thick with grade of concrete M300 pnumatic compressed / vibrated

Seven hundred six

mechanically and as per approved design Confirming to IS 15658 :

24 217.00 706.90 rupees and ninety Sqm

including 35 mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing 20 mm thick double coat Mala cement plaster with 1x1 cm grooves on

interior brick/concrete work for plastering comprising of base coat of 12 mm

thick cement plaster in Cement mortar 1 : 4 ( 1 cement : 4 coarse sand ) in Two hundred eighty six

25 1126.00 rough finishing and 8 mm thick top coat of cement mortar 1 : 2 ( 1 cement : 2 286.10 rupees and ten paise Sqm

coarse sand ) finished with trovel including scaffolding curing and 1 cm x 1 cm only

grooves at junction of structural members etc. complete for all floors.

Providing 10 mm thick Mala cement plaster with 1x1 cm grooves in single coat

on brick/concrete wall/ceiling for interior plastering upto floor two level One hundred sixty one

26 450.00 finished even and smooth including scaffolding, curing etc. complete. In Cement 161.36 rupees and thirty six Sqm

mortar 1:3(1 cement : 3 fine sand) for all floors. paise only

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly Forty rupees and fifty

brushing the surface free from mortar dropping and other foreign matter and nine paise only

sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including Eighty three rupees

28 1576.00 throughly brushing the surface free from mortar droppings and other foreign 83.18 and eighteen paise Sqm

matter and sand papered smooth. only

Finishing wall with weather proof exterior emulsion paint on wall surface (two

One hundred twenty

coats) to give an required shape even shade after thoroughly brushing the

29 933.00 120.26 rupees and twenty Sqm

surface to remove all dirt, and remains of loose powdered materials.etc

eight paise only

20mm thick sand faced cement plaster on walls upto height 10 metres above

Three hundred fifteen

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

30 933.00 315.69 rupees and sixty nine Sqm

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade concret Three hundred seventy

31 168.00 as per approved design and including excavation for fixing in proper line and 374.92 four rupees and ninety Rmt

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. two paise only

Providing and fixing granite slab of 18mm thickness for stone jamb on wall,

framing etc. on the base of cement mortar 1:3 (1-cement : 3-sand) on new Two thousand nine

surface or fixing on existing location by adhesive material including dismentaling hundred fifty six

of existing location and jointed with color cement slurry including finised with rupees and eleven

flush pointing & cleaning the surface etc. To be laid or fixed as per the direction paise only

of the Engineer-in-Charge

Providing and Fixing fully adjustable, alluminium colour anodized glazed

louvered ventilator using main frame of section No 21458 size 95 mm x 42.50 Two thousand five

mm x 0.95 mm having weight of 0.738 kg/m, using 5 mm thick 100 mm wide hundred twenty seven

transparent glass blade louver having dual controls i.e. two right and two left rupees and ninety six

handles including powder coating to metal work etc. complete. paise only

Vitrified Flooring : Providing and laying Lapato / Glossy/Matt/Rustic finish

Double charged antiskid Vitrified tiles flooring using minimum 10 mm thick

tiles as per approved make list or selected by Architect , tile size (1200 mm X

600 mm, 800 x 800,900 x900, 600x600mm) including preparing base for Two thousand one

leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and hundred twenty one

34 261.00 jointed with 3mm to 5mm thick laticrete grouting of approved shade and 2121.85 Sqm

rupees and eighty five

colour in proper line and level as per detailed drawing / instruction and paise only

approval by architect.The rate shall be inclusive of protecting the flooring by

plaster of Paris and plastic and/or bubble top sheets. (At all floor area). (Make :

Kajaria, Bell, Johnson as approved by Engineer In Charge).

Dado Work : Providing and laying Lapato/ Matt /Glossy/ Non skid,/Rustic finish

Double Charged Vitrified tiles in dado using minimum 10 mm thick tiles

approved by architect /client (size 1200 mm X600mm) fixed in dado on 10 mm

th. Cement plaster 1:3 (1 cement: 3 coarse sand) All surfaces must be

dimensionally stable according to IS 1443-1972, level, cured, undamaged, One thousand seven

compact,rigid,resistant, dry and free from any debonding agents tiles fixed by hundred sixty eight

35 152.00 approved tile adhesive and all application shall be done under instruction of 1768.22 Sqm

rupees and twenty two

manufacturer guideline and specification , and jointed with 3mm to 5mm thick paise only

epoxy grouting of approved shade and colour in proper line and level as per

detailed drawing / instruction all complete as per approved sample by Architect,

drawings and instruction of EIC. at all floors / all levels / all heights and all

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections

using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 Six hundred six rupees

36 222.00 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm 606.95 and ninety five paise Sqm

x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, only

anchor fastener, scoch bolt connecting cleat, joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

False ceiling of Aerolight light weight Calcium Silicate tiles : Providing and fixing

False ceiling of Aerolight light weight Calcium Silicate tiles Tegular Edge of size

595 x 595 x 15mm densified edge, having 100% humidity resistance and

incombustible as per BS 476 part - 4 with thermal conductivity of 0.043 W/m0

kC, with NRC of .50 and approved surface design to be placed in the Grid

suspended Ceiling with border of Gypsum sheet . Grid system made of

Galvanised steel Section with main ''T'' runner 3.6 mt long with size 38 x 24 x

0.30 mm spaced at 1200mm c/c and cross "T" of 1.2 mt long with size 24 x 24x Seven hundred eighty

37 45.00 0.30 mm spaced between main ''T" at 600mm c/c to form a grod of 600 x 1200 786.84 six rupees and eighty Sqm

mm and secondary cross "T" of length 600 mm to be inter locked at middle of four paise only

the 600 x 1200 mm panel to form a grid of 600 x 600 mm. The wall angle of size

24x 24x 0.55 mm to be fixed all around the perimeter of the wall. The main "T"

runner to be suspended from the ceiling using GI sloted cleats and 50mm long

dash fasteners,4mm GI adjustable rods with galvanised level clips with all labour

and material and as directed by Engineer incharge.

Providing and fixing M.S. grills of required pattern to wooden frames of

One hundred six

windows etc. with M.S. flats at required spacings and frame alround, square or

38 1120.00 106.23 rupees and twenty Kg

round bars with round headed bolts and nuts or by screws (A) Plain Grill.

three paise only

Flush Door With Both Side Laminate - Providing and fixing 35 mm thick shutters

Five thousand nine

for Doors with Both side Laminate including Indian teak Wood Frame including

hundred ten rupees

39 40.00 black enamelled iron oxidized fixtures and fastenings and necessary hardware 5910.14 Sqm

and fourteen paise

such as hinges, door stopper, door closer, handle, mortice lock etc, complete.

Providing and fixing MS Ladder of required pattern with MS flats(30x3mm) or

round or square bars (12mm) at required spacing & with round headed bolts One hundred ten

40 150.00 and nuts or screws or welding including primer coat of approved quality and 110.43 rupees and forty three KG

two coats of oil paintas as directed by engineer in charge paise only

S.S Railing : Providing and Fixing S.S. Railing for staircase made from S.S

Grade, 50mm Top hand rail, 32mm Vertical Balustrade fixing at 1.2 mt C/C with

Three thousand seven

anchor fastner 75 mm dia 8 mm thick flange and shoe cap, with 3 nos of 16 mm

hundred sixty seven

41 16.00 Horizontal pipe fitting with L and Key ,modular knob system. Balustrade top 3767.43 Rmt

rupees and forty three

modular "T" fixing support to 50 mm hand rail and turning fixed with modular

bend. including accessories as per detailed drawing as directed etc. complete.

Wash basin table top counter - Toilet / Wash Area (Counter width- 600mm ) :

Providing & fixing two layers of wash basin counter,first layer using 25mm thick

Kotastone of approved shade and second layer using approved shade and

sample of Mirror finish Granite (Of Texture, shed, Colour and pattern as

approved by EIC ), joined together with 1:4 Cement mortar beding / approved Three thousand three

tile adhesive , to true plane & level or to slopes,or close jointed with cement hundred thirty one

42 8.00 slurry with pigment of matching shade and colour and finishing with the same, 3331.67 Sqm

rupees and sixty seven

including dedo 2'6" ht , cutting kotah & tile as per required shape & size to fit paise only

Wash basin,& 3" to 9" facia with moulding, nosing, chamfered front edges,

fixing, disposal of debris etc. finished as per design in detail drawing and

instruction of Architec/EIC.The sample mock shall be approved from

Painting three coats (one coat of priming coat + two coats of enamel paint) on

new steel and other metal surface with enamel paint including preparing the One hundred twenty

43 25.00 surface by throughly cleaning, oil, grease, dirt and other foreign matter and 128.62 eight rupees and sixty Smt

scoured with brushes fine steel wood, scrapers and sand paper etc. comp. two paise only

I.P.S Flooring: Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

Three hundred sixty

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer

44 34.00 369.13 nine rupees and Smt

and finished with a floating coat of neat cement. (B)50mm thick.

thirteen paise only

Providing and laying polished Kota stone slab flooring over 20mm (Average) One thousand one

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid hundred thirty one

over and jointed with grey cement slurry including rubbing and polishing etc. rupees and twenty four

complete. (B) 30 mm thick paise only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe

Seventy two rupees

shall be fixed on the wall with the help of clamp at every two metre C/C or shall

46 200.00 72.65 and sixty five paise Rmt

be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every two metre C/C or shall Ninety one rupees and

be concealed as directed including necessary fittings etc. including testing of eighty four paise only

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe

One hundred forty

shall be fixed on the wall with the help of clamp at every two metre C/C or shall

48 488.00 148.12 eight rupees and Rmt

be concealed as directed including necessary fittings etc. including testing of

twelve paise only

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe

One hundred ninety

shall be fixed on the wall with the help of clamp at every two metre C/C or shall

49 440.00 195.67 five rupees and sixty Rmt

be concealed as directed including necessary fittings etc. including testing of

seven paise only

pipe and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in PVC SWR pipes IS 13592 for Drain - 75 mm dia

including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be concelled as One hundred forty four

50 240.00 directed including necessary fittings etc. including testing of pipe and joints and 144.40 rupees and forty paise Rmt

fixing the same with adhesive solvent, including cost of al`l materials.[D] 75mm. only

To be fitted as per the directions of Engineer-in-Charge.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

Three hundred thirty

poluthene pipes of the following outside Dia. Low densidy, complete with

51 320.00 339.05 nine rupees and five Rmt

special falnge compression type fittings, wall clipsetc. including making good the

wall ceiling and floor.(G)110 mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

Five hundred ninety

with jali of the following nominal diameter of self cleansing design with C.I

52 24.00 599.64 nine rupees and sixty Each

scread down or hinged grating including the cost of cutting and making good

four paise only

Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or One thousand one

equivelent and as per directed by engineer incharge. (A) 25mm dia. hundred thirty rupees

and fourteen paise

Providing and fixing Brass ball Handle Valve of standard compny like Zoloto or Four thousand two

equivelent and as per directed by engineer incharge. (A) 50mm dia. hundred thirty five

rupees and ninety nine

Wall Mounting/Floor Mounting European WC : Providing and fixing wash down

wall mounting/ floor mounting EWC of approved shade, conforming to Pattern

2 of IS: 2556 (Part -II), with SWR Self it Soil PVC pipe and plug, rimeless having

siphonic flush bend as per specifications; glazed vitreous / Colored European Twenty thousand nine

Water Closet with Cistern Dual Flush System (IS-2326) , with grouting the CI hundred sixty five

55 4.00 chair inside the floor/wall, rubber gaskets, connecting PVC 110mm dia soil pipe 20965.08 rupees and eight paise Each

with PVC coupling, nuts, traps, mounting cistern on WC., and solid Varity heavy only

duty plastic seat cover as per IS-2548, of approved make; cutting and making

jari work etc. complete.[Make :Jaquar SLS-WHT-6953BIPPSM, [Including Seat

cover / Outlet Gasket / Inlet Gasket].

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size

Nine hundred eighty

580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid

56 4.00 982.13 two rupees and Each

for separately) (A) Vitreous China.(I) Long pattern = White colour

thirteen paise only

Providing & fixing white vitreous china flat back urinal of size below mentioned

size as per IS- 2556 (Part-2 ) with C.I. hangers and Push Cock, Waste Pipe and

pipe to wall with C.P. flange complete including cutting and making good the Fourteen thousand

57 8.00 walls and floors wherever required.[Jaquar URS-WHT-13253N] [385x325x635 14051.83 fifty one rupees and Each

mm] [Waste Coupling :Jaquar :ALD 709L130][Spreader ALD-1043]and Auto eighty three paise only

closing Concealed Urinal Flush Valve With Wall Flange[PRS-CHR-073].

Providing and fixing glazed vitreous Wash Basin Round/Ovel/Rectangular Over-

Counter, of 450 mm dia./Size, with supporting in stone flooring, 1 no, Waste Seven thousand eight

58 8.00 Pipe,1.2m Flexible Pipe [1No] and waste coupling. Colour/pattern should be 7840.13 hundred forty rupees Each

approved by Architect or Engineer Incharge Etc complete. [Jaquar CNS-WHT- and thirteen paise only

Providing and fixing Disabled toilet Hand Rail Set Grab bar of approved quality

Twenty six thousand

as per IS and shall be approved by Engineer In Charge

seven hundred seventy

two rupees and fifty

eight paise only

Health Faucet: Providing and Fixing Health Faucet ABS body with wall hook and

1 meter crome plated PVC hose pipe of approved quality and conforming to One thousand seven

60 4.00 Manufacturers Standards, to the wall surface with necessary fixture / 1701.60 hundred one rupees Each

accessories ,necessary holes and grooves work and making it well finished etc. and sixty paise only

complete as per drawing and details.

Two Way Bib Cock: Providing ,fixing ,testing commissioning and keeping in good Three thousand four

condition until project completion of 15mm dia two way bib cock with all hundred fifty five

fittings complete as per specification/drawings and details. rupees and forty six

Angular cock W/O flange: Providing, fixing and testing and commissioning of Two thousand one

15mm CP brass angle valve with CP copper connecting pipe 375 mm long along hundred forty eight

with nuts, washer and brass flange complete as per drawing and details(for rupees and seventy

wash basin control valves) eight paise only

Pillar cock: Providing and fixing brass pillar tap, capstan head, screw down high Three thousand seven

pressure with screws, shanks and back nuts. (i) 15mm dia. To be fixed as per the hundred sixteen

instructions of the Engineer-in-Charge. rupees and eighty

Providing and fixing screw down bib taps of following size.(A) Brass screw down Two hundred fourteen

64 12.00 bib tap polished bright. (ii) 20mm dia 214.81 rupees and eighty one Each

Providing and fixing toilet paper holder.(A) C.P. Brass

Four hundred twenty

65 4.00 427.99 seven rupees and Each

ninety nine paise only

Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and Five hundred eighty six

66 8.00 guard rail complete mixed to wooden plug with C.P. brass screws. 586.09 rupees and nine paise Each

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed Six hundred sixteen

67 16.00 to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 616.42 rupees and forty two Each

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass Three thousand one

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge hundred eighty two

with C.P. brass screws and washers. rupees and ninety nine

Providing and Fixing Soap Dispenser in Polished chrome of approved make and One thousand nine

conforming to Manufacturers Standards. As per approved and selection by hundred forty five

architect/consultant make UFC JAQUEL-soap dish -113 or equivalent as rupees and fifty one

approved and selection by architect. paise only

Providing & Fixing Waterless and Odourless Urinal kit in Urinal Poat including all

material, labour etc. complete. The material grade of the same should be SS 304 Ten thousand two

with height of 90 mm and diameter of 39 mm along with membrane flap hundred four rupees

technology made with respect to IS-2963:1979. It should be assembled and and ninety four paise

fixed as per the direction of the Engineer-in-Charge. only

S.S Kitchen Sink: Providing and fixing Kitchen sink with C.I. or M.S. brackets, Two thousand three

painted white including cutting holes in walls and making good the same but hundred twenty six

excluding fittings. (C)Vitreous China Sink. (i) 600mm x 450mm x 150mm size rupees and sixty six

Kitchen Sink Cock with Extended Swinging Spout: Providing and Fixing Single Six thousand seven

lever Deck Mount Kitchen Sink Cock with Extended Swinging Spout (Wall hundred thirty nine

Mounted Model) With Wall Flange, in Polished Chrome of approved make and rupees and twenty

conforming to Manufacturers Standards. three paise only

URINAL PRIVACY divider - Providing & fixing Basin/Urinal Partition design

privacy divider or minimal touch privacy divider of following 8mm thick Glass

Eight thousand four

size 450mm(D) x 900mm(H), designed with slot for minimal wall touch for

hundred seventy eight

73 8.00 better hygiene. Fixed on wall with the help of SS grade 316 brackets. A quality 8478.95 Each

rupees and ninety five

standards with Antivirus, Antibacterial and Antifungal properties of Jaquar

Types and shape of urinal privacy divider as per Architect's selection and as per

direction of Engineer-in-charge.

Providing and fixing PVC SWR Vent Cowl 110 mm dia with mesh at the exterior

surface to Avoid Birds Entering For Bathroom/Office/Kitchen

Twenty six rupees and

74 12.00 Ventilation/Exhaust Fan of approved company at the output for the toilets. It 26.04 Each

four paise only

should be assembled and fixed as per the direction of the Engineer-in-Charge.

Providing and fixing in position storage unit of any height and depth (450/600

mm), fabricated from 18/19 mm BWR grade calibrated plywood of approved

make, with shutters made from 12 mm plywood or 6 mm thick glass shutters (as

specified), complete with openable arrangement. All external and internal Sixteen thousand

75 29.00 surfaces shall be finished with 1 mm laminate, with batten patti on exposed 16019.28 nineteen rupees and Smt

edges finished in PU polish and 2 mm PVC edge banding. The unit shall include twenty eight paise only

soft-close concealed hinges, soft-close drawer channels (35 kg capacity), locks,

and all necessary hardware, complete as per approved drawings and

instructions of Engineer-in-Charge/Architect.

Providing and fixing Drawer unit, size 450 x 450 x 600mm as per design

provided by the architect with drawer with lock of size 450x450x200mm and

shutter made from 18 mm calibrated plywood of standard make having 0.8mm Five thousand fifty

thick laminate finish with drawer channel including all assecaries like lock, rupees only

handles, etc. complet as per instruction given by engineer in charge/Architect

Signage :Manufacturing, supply, arrangement and keeping in good condition

until project completion SS/Wooden/MDF signage using SS

grade/Plywood/MDF material brush finish 1.5mm thick sheet with letter,

numbers, graphic, symbol etc made by acid etching process with duco paint/

Sixteen thousand two

powder coating as per drawings and instruction of the architect. All required

77 3.00 16261.00 hundred sixty one Smt

CNC cutting/ laser cutting shall be carried out as per drawing. The plate shall be

fixed on brick/ RCC wall/ ply/ cement board/ furniture/ door with the necessary

fixing hardware like SS stud, fastner, self adhesive double side tape etc.

complete for all floors and all height. The rate shall be inclusive of all material,

laour, hardware scaffolding etc.

Providing and fixing of Main Enterance Board Veneer Finish madeup of 18mm

thick BWR plywwod of standard make like Century, Greenlam, Marine,

Eleven thousand nine

Greenply, Saint-Gobain, Sainik etc with at back, 3 to 5 mm thick veneer sheet

hundred eighty one

78 11.00 including PU Polish, batten border and name plate madeup of S.S. Grage 304 11981.86 Smt

rupees and eighty six

having thickness upto 2.5mm having size as per requirement including

computerized printing in SS plate to board complete and shall be approved by

Engineer In charge/Architect.

Zebra Roller blind : Providing and fixing Zebra blind roller curtain with superior Four thousand one

quality Acmeda Mechanism including all necessaries fitting like breaket chain hundred eighty one

etc. complete as per instruciton of Engineer in charge. rupees and forty paise

Pillow With Cover : Manufacturing, supply, arrangement and keeping in good

condition until project completion of pillow of Microfiber / Hollow Conjugated

Siliconized Fiber minmium 430 x 680 mm with 150 mm thickness as per One thousand one

approved drawing. pillow cover finish and colour as per architect hundred sixty one

selection.pillow cover material shall be 100% Cotton or Cotton-Polyester Blend rupees and fifty paise

with spun. All pillow and covers . Measurement should be consider in plan only

area. all item shall be done as per approved sample.at all floors / all levels / all

Singal Bed Size Of (2100x900 mm) : Manufacturing, supply, arrangement and keeping in good

condition until project completion of single or double bed upto 550 mm height of as per design

drawings and instruction of EIC. Framing, bracing, horizontal and vertical supports and facia

shall be made of seasoned Indian teak wood, MS pipes and Urea formaldyhyde free MR/BWP

grade ply wood as per drawings and top shall be made of 18 / 25 mm thick ply wood confirming

to Urea formaldyhyde free MR/BWP grade Decorative type (BWP/MR-DEC) as per relevant IS

codes using low VOC adhesive. CFC HFCF free suitable adhesive. External facia of plywood to be

covered with 10 mm solid indian teakwood as per selection. Top face of ply wood support of

mattress to be covered with 1 mm thick laminate. For all edges 9 mm solid indian team wood

lipping to be used. All joinery to be based on good practices such as tounge and groove joint,

dovetail joint etc and using hardware such as "L" brace, Tee, corner brace, screws, nails and

Twelve thousand

pocket-screw joinery etc. as per drawings, specification and instruction by EIC. Price to be

inclusive of all other hardware such as adhesive, nails, screws, fasteners, clips, abro tap, ABS seventy three rupees

parts etc and all labour. All external wood to be seasoned indian teak wood. All externally visible and seventy nine paise

surfaces of solid wooden surfaces shall be polished with water based low VOC PU polish in only

shade, finish, texture and specification as per architect including fine sanding before and after

insulator (sealer) coats and first coat of PU, clear non-toxic low VOC termite control additive,

coat of clear epoxy insulator in 1:1 proportion of hardner and epoxy, dent filling with matching

putty, wooden stainer and 2 coats of water based PU etc.and all internal surfaces of plywood/

wood to be polished using laquer polish. All externally visible MS pipes to be finished using

polyster powder coating and non visible pipes to be finished with epoxy primer and satin oil

paint. Rates to be for complete product as per drawings and as directed by EIC. Area to be

measured in plan. All plywood/ solid wood to be treated for termite using Terminator Wood

Preservative or equivalent. at all floors / all levels / all heights

Single Bed MATTERESS Size Of (2100x900 mm) : Supply and placing in position

Ten thousand nine

keeping in good condition until project completion of meteress height upto

hundred seventy six

82 20.00 mm depth having 3” Ortho bonded + 1” H.R foam + 2” Memory + full foam 10976.18 NO

rupees and eighteen

quilted jaquared cover with 5 year replacement warranty.at all floors / all levels

Single Bed BEDSHEET PLAIN Size Of (2500x1300 mm) : Manufacturing, supply,

arrangement and keeping in good condition until project completion of Bed

sheet having size as per approved drawing.Bedsheet finish and colour as per

architect selection.Bedsheet material shall be 100% Cotton or Cotton-Polyester Eight hundred thirty

83 20.00 Blend with spun. Bedsheet having 200-300 Thread Count with 120-140 GSM and 830.47 rupees and forty seven NO

feel like Soft, breathable, durable. bedsheet shall be fully washable with paise only

percentage 3% to 5% of Shrinkage after washing.Mesurement should be

consider in plan area. all item shall be done as per approved sample at all floors

/ all levels / all heights

Dismentaling Item

Demolition including stacking of serviceable materilas and disposal of One thousand one

unserviceable materials with all lead and lift. (i) R.C.C. work hundred ten rupees

and seventy five paise

Dismentling steel work including distempering and stacking the materials with Three rupees and

all lead and lift. eighty five paise only

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

Fifty rupees and eleven

86 127.00 stacking of serviceable materilas and disposal of unserviceable materials with all 50.11 Smt

lead and lift.(i) G.I.sheet roofing.

One crore thirty four lakh sixty one thousand six hundred forty four rupees and ninety nine paise only

I / We am / willing to carry out the work at __________ above / below __________ percentage (should be written in figures and words) above / below the

estimated amount mentioned above. Amount of my/our tender works out as under.

Estimated Amount put to Estimated Amount put to

Deduct _________ % Below. Add _________ % Above.

Notes For Civil Work :-

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:

4 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of dismentled materials amount Rs.49902.00 Deducted form 1st. R.A bill.

Deputy Executive Engineer Executive Engineer

Dated signature of

Capital Project sub Division .4 Capital Project Division .2

Gandhinagar Gandhinagar

Credit of Dismantled Material

Quantities Estimated rates Total

Estimated Amount

but may be Items of works Unit According to

more or In Figure In words Estimated

less Quantities

Twenty three rupees

A 1874.00 Steel 23.00 KG

One thousand seven

B 4.00 Cabin (Pre fabricated insulated panel/sheet-metal panel) 1700.00 NO

hundred rupees only

Forty nine thousand nine hundred two rupees only