Rajasthan

Active

Works

Civil Works

Annual Rate Contract for the work of construction and commissioning of 200/150 MM dia. Tube wells with Providing installation and commissioning of Three Phase/ Single Phase Power pump set and other related civil and electrical works

PHED-Chief Engineer(HQ),Jaipur

Ajmer, Rajasthan

Amount: ₹1 CrCloses: 8 Oct 2026

Timeline

Published30 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹1 Cr

EMD Value

₹2 L

Closing Date

8 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

Executive Engineer

Address

Executive Engineer PHED District Rural Division Ajmer

Work Description

Annual Rate Contract for the work of construction and commissioning of 200/150 MM dia. Tube wells with Providing installation and commissioning of Three Phase/ Single Phase Power pump set and other related civil and electrical works

Tender Information

Tender ID

2026_PHCJA_602060_1

Reference Number

EE PHED District Rural Division Ajmer NIT NO 25

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

365 days

Location

Ajmer

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender document

Documents Required

10 documents required · 10 mandatory

Fee

RequiredScanned copy of proof of payment of Bid Document Cost, Bid security and Bid processing fees. (.pdf)

RequiredCertified copy of the valid enlistment order issued by the competent authority of department. (.pdf)

RequiredDigitally signed GST Registration certificate and Pan Card. (.pdf)

PreQual/Technical

RequiredAll Annexure as per tender document (.pdf)

RequiredThe drilling rig must to registered with District Collector, Ajmer (.pdf)

RequiredCertificate regarding work experience of the work in prescribed formats as per Technical Criteria (.pdf)

RequiredHistorical Contract Non Performance on Rs. 500/- Non judicial stamp paper duly notarized. (.pdf)

RequiredFormat C on 100/- Non judicial stamp paper duly notarized (.pdf)

RequiredBid document with each page digitally signed (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

Tender Fee Payable To

8745 EE PHED District Rural Dn Ajmer

EMD Fee Amount

₹2 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Sept 2026

Published

30 Sept 2026

Bid Opening

9 Oct 2026

Download Starts

30 Sept 2026

Download Ends

8 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (107 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.	-	-	-	-
2	HDPE PE-80 PN-6	-	-	-	-
3	63 mm dia	1	RMT	171	₹171
4	75 mm dia	1	RMT	217	₹217
5	90 mm dia	1	RMT	306	₹306
6	110 mm dia	1	RMT	463	₹463
7	Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.	-	-	-	-
8	MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)	1	Kg	126	₹126
9	Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.	-	-	-	-
10	Nominal bore 150 mm dia.	1	Mtr	726	₹726

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.72 MB

Work Item Documents

BOQ_1067218.xls

BOQ • 0.45 MB

TD.pdf

Tender Documents • 2.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.

HDPE PE-80 PN-6

63 mm dia

RMT

171

₹171

75 mm dia

RMT

217

₹217

90 mm dia

RMT

306

₹306

110 mm dia

RMT

463

₹463

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.

MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)

126

₹126

Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.

Nominal bore 150 mm dia.

Mtr

726

₹726