REPAIR OF VARIOUS TYPES OF STEEL FURNITURES AND ITS PAINTING AT GE RAMGARH CANTT FOR SRC PRC AND VARIOUS UNITS UNDER GE RAMGARH

Amount

Almirah large 1/2Hx1/2Sh With one side mirror (Drg No:1033) M & L for replacement of legs of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet shape and size as per drawing duly painted with two coats of synthetic enamel paint Olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 3 way locking device of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one made out of 10mm dia steel round rod and 3mm thick MS plate holding cover and washer shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of Shelf of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet and providing 04 Nos. of cleat for fixing to almirah shape and size as per drawing duly painted with two coats of synthetic enamel paint, Olive Green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of Door shutter of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one made out of 1mm thick MS sheet and providing 75mm butt hinges for fixing door to almirah shape and size as per drawing duly painted with two coats of synthetic enamel paint, Olive Green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass lock of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one with triplicate keys, shall be provided and fixed complete all as directed by Engineer in charge. Make: LINK/RINA or its equivalent approved.

M & L for replacement of 125mm chromium plated steel handle of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one shall be provided and fixed as shown in drawing, complete all as directed by Engineer in charge.

M & L for replacement of 5mm thick looking mirror of approved Make of Almirah Steel Large ½ H x ½ Sh with one side mirror, with new one shall be provided and all as shown in drawing, complete all as directed by Engineer in charge.

M & L for replacement of two socket of hanging rod/pipe of Almirah Steel Large ½ H x ½ Sh with one side mirror, shall be provided and as per existing, complete all as directed by Engineer in charge.

M & L for replacement of 19mm dia steel hanging rod/pipe of Almirah Steel Large ½ H x ½ Sh with one side mirror, shall be provided and as per existing, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated door/shutter of Almimah steel large ½ H x ½ Sh with one side mirror and making its shape and size as per drawing and refixing in the same position including welding and providing 75mm butt hinges (03 Nos) as per existing, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated shelf of almirah large ½ H x ½ Sh with one side mirror and refixing the same in position in including providing cleats etc., complete all as directed by Engineer in charge.

M & L for taking out existing leg from Almirah Steel Large ½ H x ½ Sh with one side mirror, made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding and complete all as directed by Engineer in charge.

Almirah large Steel With shelf (Drg No:1031/167(M) M & L for replacement of legs of Almirah Steel Large with shelf with new one made out of 1mm thick MS sheet shape and size as per drawing duly painted with two coats of synthetic enamel paint Olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 3 way locking device system of Almirah Steel Large with shelf with new one made out of 10mm dia steel round rod and 3mm thick MS plate holding cover and washer shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of shelf of Almirah Steel Large with shelf with new one made out of 1mm thick MS sheet and providing 04 Nos of cleats for fixing to almirah shape and size as per Drawing duly painted with 02 coat of synthetic enamel paint Olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of Door/Shutter of Almirah Large Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 75 mm butt hinges for fixing door to almirah shape and size as per drawing duly painted with two coats of syntetic enamel paint Olive Green over a coat of red oxide primer, complete all as directed by Engr-in-charge.

M & L for replacement of 50mm brass lock of Almirah large steel with shelf with triplicate keys shall be provided and fixed or as directed by Engr-in-Charge. Make: LINK/RINA or its equivalent.

M & L for replacement of 125mm chromium plated steel handle of Almirah large steel with shelf with new one shall be provided and fixed or as directed by Engr-in-Charge.

M & L for taking out existing dislocated door/shutter of Almimah steel large with shelf and making its shape and size as per drawing and refixing in the same position including welding and providing 75mm butt hinges (03 Nos) as per existing, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated shelf of Almirah large steel with shelf and refixing the same in position in including providing cleats etc., complete all as directed by Engineer in charge.

M & L for taking out existing leg from Almirah Large Steel with shelf, made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding and complete all as directed by Engineer in charge.

Almirah Steel Medium 1/2 Hx 1/2 Sh (FD-1032): M & L for replacement of legs of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one shall be made out of 1mm thick MS sheet shape and size as per drawing duly painted with two coat of synthetic enamel paint Olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 03 way locking device system of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one made out of 10mm diameter steel round rod and 3mm thick MS plate holding cover and washer shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of Shelf of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one made out of 1mm thick MS sheet and providing 4 nos of cleats for fixing to almirah shape and size as per existing drawing, duly painted with two coats of synthetic enamel paint olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of Door shutter of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one made out of 1mm thick MS sheet and providing 75mm butt hinges (03 Nos) for fixing door to almirah shape and size as per existing drawing, duly painted with two coats of syntetic enamel paint olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass lock of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with triplicate keys shall be provided and fixed, complete all as directed by Engineer in charge. Make: Link/RINA or its equivalent as approved.

M & L for replacement of 125mm chromium plated steel handle of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one shall be provided and fixed, complete all as directed by Engineer in charge.

M & L for replacement of 5mm looking mirror of approved make of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one shall be provided and fixed, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated shelf of Almirah Steel Medium 1/2 H x 1/2 Sh with one side mirror and refixing the same in position in including providing cleats etc. complete all as directed by Engineer in charge.

M & L for taking out existing dislocated door/shutter of Almimah steel med 1/2 H x 1/2 Sh with one side mirror and making its shape and size as per drawing and refixing in the same position including welding and providing 75mm butt hinges (03 Nos) as per existing, complete all as directed by Engineer in charge.

M & L for taking out existing leg from Almirah Steel med 1/2 H x 1/2 Sh with one side mirror, made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding and complete all as directed by Engineer in charge.

M & L for replacement of two socket of hanging rod/pipe of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one shall be provided and fixed, complete all as directed by Engineer in charge.

M & L for replacement of 19mm dia steel hanging rod /pipe of Almirah steel med 1/2 H x 1/2 Sh with one side mirror with new one shall be provided and fixed, complete all as directed by Engineer in charge.

Almirah Medium Steel with shelf (FD-1032):M & L for replacement of legs of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet shape and size as per drawing duly painted with two coats of synthetic enamel paint olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 3 way locking device of Almirah Med Steel with shelf with new one shall be made out of 10mm diameter steel round rod and 3 mm thick MS plate holding cover and washer shape and size, complete all as directed by Engineer in charge.

M & L for replacement of Shelf of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 4 Nos of cleats for fixing to almirah shapes and size as per drawing duly painted with two coats of synthetic enamel paint olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of Door shutter of Almirah Med Steel with shelf with new one shall be made out of 1mm thick MS sheet and providing 75 mm butt hinges (03 Nos) for fixing door to almirah shape and size as per drawing duly painted with two coats of synthetic enamel paint olive green over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass locks of Almirah Med Steel with shelves, with triplicate keys shall be provided and fixed, complete all as directed by Engineer in charge. Make: LINK/RINA or its equivalent.

M & L for replacement of 125mm chromium plated steel handle of Almirah Med Steel with shelves, with new one, shall be provided and fixed, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated door/shutter of Almirah Med Steel with shelf, and making it's shape and size as per drawing and refixing the same in position including welding and providing 75 mm butt hinges (03 Nos) as per existing, complete all as directed by Engineer in charge.

M & L for taking out existing dislocated shelf of almirah Medium steel and refixing the same in position in including providing cleats etc., complete all as directed by Engineer in charge.

M & L for taking out existing LEG from Almirah Med Steel with shelf, made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, complete all as directed by Engineer in charge.

Chair Tubular steel With Arms (FD-75(M):M & L for replacement of unserviceable wooden seat of Chair tubular steel with arms duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel with arms with screws, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable wooden back of Chair tubular steel with arms duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel with arms with screws, complete all as directed by Engineer in charge.

M & L for replacement of existing/broken stiffener of Chair tubular steel with arms 490mm (02 Nos) & (04 Nos). cleat of size 50 mm long made out of MS flat iron 20x3mm welded under the seat frame and back frame respectively including providing one coat of synthetic enamel paint Olive Green, complete all as directed by Engineer in charge.

M & L for replacement of Hard rubber shoes of Chair tubular steel with arms of any type to set of 4 Nos in one chair, complete all as directed by Engineer in charge.

M & L for replacement of wooden handles of Chair tubular steel with arms, with new one made out of well seasoned first class teak wood of chair tubular steel with arm to set of 02 Nos in one chair, complete all as directed by Engineer in charge.

Chair Tubular steel Without Arms (FD-75(M):M & L for replacement of unserviceable wooden seat of Chair tubular steel without arms with new one duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel without arms with screws, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable wooden back of Chair tubular steel without arms with new one duly caned with approved quality cane and exposed wooded portion to be painted with two coat of synthetic enamel paint, fixed in frame of chair tubular steel without arms with screws, complete all as directed by Engineer in charge.

M & L for replacement of existing/broken stiffener of Chair tubular steel without arms 490mm long (02 Nos) & (04 Nos) cleat size 50mm long made out of MS flat iron 20x3mm welded under the seat frame and back frame respectively including providing one coat of synthetic enamel paint Olive Green, complete all as directed by Engineer in charge.

M & L for replacement of Hard rubber shoes of Chair tubular steel without arms of any type to set of 4 Nos in one chair, complete all as directed by Engineer in charge.

Chair CBA Special (FD-120R):M & L for replacement of existing broken/damaged leg of Chair CBA special of size 1.6mm thick 10mm square tube, 440 mm long, with new one as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged seat of Chair CBA special duly caned with approved quality cane and exposed wooded portion painted with two coats of synthetic enamel paint, fixed in frame of chair CBA special with screws, complete all as directed by Engineer in charge.

M & L for replacement of unserviceable wooden back of Chair CBA special duly caned with approved quality cane and exposed wooded portion painted with two coats of synthetic enamel paint, fixed in frame of chair CBA special with screws, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged hand rest and including fixing arrangement to the frame of Chair CBA special with new 12 mm thick well seasoned first class teak wood plank hand rest, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged flat iron of Chair CBA special with new flat iron of 25x3 mm, 225 mm long (02 Nos) and detatched frame made to shape by welding duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of square hard rubber shoe of Chair CBA special of any type to set to 04 Noes in one chair, complete all as directed by Engineer in charge.

CHAIR EASY STEEL WITH CUSHION (FD-21M) M & L replacement of unserviceable existing unserviceable foam and rexene from Chair Easy steel with cushion with new 50mm thick foam 32 density with superiority quality rexene for SEAT and necessary welding to detatched cleat to fixing seat, complete all as directed by Engineer in charge.

M & L replacement of unserviceable existing unserviceable foam and rexene from Chair Easy steel with cushion with new 50mm thick foam 32 density with superiority quality rexene for BACK and necessary welding to detatched cleat to fixing seat, complete all as directed by Engineer in charge.

M & L replacement of wooden handle made out of well seasoned first class teak wood of Chair Easy steel with cushion to set of 02 Nos in one chair, complete all as directed by Engineer in charge.

M & L replacement of square hard rubber shoe of Chair Easy steel with cushion to set of 04 Nos in one chair, complete all as directed by Engineer in charge.

FORM WITHOUT BACK (FD-77M): M & L for replacement of existing unserviceable/damaged SEAT of Form without back with new well seasoned first class teak wood duly apply with two coat of French Polish, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable/damaged STIFFENER of Form without back with new one made out of 25mm MS tube 1.6 mm thick, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged LEGS of Form without back with new one made out 1.6mm thick, 25mm Square tube, shape and size as per existing, complete all as directed by Engineer in charge.

DESK STEEL (FD-107): M & L for replacement of existing unserviceable/damaged TOP of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x1220x18 mm thick, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable BOTTOM of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x1220x18 mm thick, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable BOTH SIDE of DESK STEEL with new one made out of 18mm thick prelaminated particle board exterior grade of size 530x200x18 mm thick, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable BACK of DESK STEEL with new one made out of 6mm thick commercial plywood teak veneer face one side and commercial on the other side of size 530x1220x6 mm thick, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged legs of DESK STEEL made out of 1.6mm thick 20mm dia MS conduit pipe, 640mm long shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable STIFFENER of DESK STEEL made out from 20mm dia MS conduit pipe, 1.6mm thick 480mm long shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing unserviceable long rail of DESK STEEL made out from 20mm dia MS conduit pipe, 1.6mm thick 1220mm long shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of round hard rubber shoe 20mm dia of DESK STEEL of any type to set of 04 Nos, complete all as directed by Engineer in charge.

Stool revolving adjustable steel 3' height with padded (FD-354): M & L for replacement of existing unserviceable foam and rexene from Stool Revolving adjustable Steel 3' height with padded, with new 50mm thick foam 32 density with superior quality of rexene and seat, complete all as directed by Engineer in charge.

M & L for replacement of round 20mm hard rubber shoe Stool revolving adjustable steel 3' height with padded of any type to set of 04 Nos. complete all as directed by Engineer in Charge.

TABLE DINING ORS' (FD-165M):M & L replacement of existing unserviceable STIFFENER of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of existing broken/damaged LEGS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of existing broken/damaged SHORT RAILS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, 610 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of existing broken/damaged LONG RAILS of TABLE DINING ORS with new one made out of 25 mm Square tube 1.6 mm thick, 1520 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable TOP of TABLE DINING ORS with new one made out of 18mm thick pre-laminated particle board exterior grade with desired finished in one side and balancing white and including providing 04mm teak wood beading all around table top, complete all as directed by Engineer in charge. Make: As mentioned in List of approved Makes Appx 'C'

M & L for replacement of square hard rubber shoe of TABLE DINING ORS' of any type to set to 04 Nos in one chair, complete all as directed by Engineer in charge.

TEAPOY VERANDAH (FD-255): M & L replacement of existing unserviceable LEGS of TEAPOY VERANDAH with new one made out of 1.6mm thick, 20mm dia MS conduit pipe made to shape 'U' of 964 mm shape and size as per existing, complete all as directed by Engineer in charge.

M & L replacement of existing broken/damaged TOP LONG RAIL of TEAPOY VERANDAH with new one top rail medium of size 350x25x4 mm thick Flat iron welded to top conduit pipe frame, complete all as directed by Engineer in charge.

M & L replacement of existing broken/damaged TOP SHORT RAIL of TEAPOY VERANDAH with new one top rail medium of size 200x25x4 mm thick Flat iron welded to top conduit pipe frame, complete all as directed by Engineer in charge.

M & L replacement of existing unserviceable TOP of TEAPOY VERANDAH with new one made out of 18mm thick prelaminated particle board exterior grade with desired finished in one side and balancing white and including providing 04 mm thick teak wood beading all round table top, complete all as directed by Engineer in charge.

M & L for replacement of round 20mm hard rubber shoe of TEAPOY VERANDAH, of any type to set of 04 No in one Teapoy Verandah, complete all as directed by Engineer in charge.

TABLE OFFICE CLERK STEEL (FD-1004) M & L for replacement of existing broken/damaged leg of Table office clerk steel made out from 1.6mm thick, 25mm square tube 760 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for 50mm brass lock of Table office clerk steel, with new one, with triplicate keys shall be provided and fixed or as directed, by Engineer in charge. Make: LINK/RINA or its equivalent as approved.

M & L for replacement of old existing/damaged drawer of Table office clerk steel with new drawer made out from 1mm thick MS plain sheet to required shape and size as per drawing, complete all as directed by Engineer in charge.

M & L for replacement of old existing/damaged stiffener of Table Office clerk steel with new stiffener 1100 long made out from 1mm thick MS plain sheet to required shape and size ,complete all as directed by Engineer in charge.

M & L for replacement of existing/damaged TOP of Table Office clerk steel with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, complete all as directed by Engineer in charge.

Supply and fixing of PVC handle of drawer of Table Office Clerk Steel shape and size as per drawing, complete all as specified and as directed.

M & L for taking out of existing drawer of Table Office Clerk steel and refixing in the same position after repair and denting making shape and size as per drawing and repairing the same in position including fixing arrangement and complete all as directed by Engr-in-Charge.

M & L for replacement of square hard rubber shoe of Table Office Clerk Steel of any type to set of 4 nos, complete all as directed by Engineer in charge.

TABLE OFFICE OFFICERS STEEL (FD-1003) M & L for replacement of existing broken/damaged leg of Table office officer steel made out from 1.6mm thick, 25mm square tube 760 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass lock of Table office officer steel, with new one, with triplicate keys shall be provided and fixed all as directed by Engineer in charge. Make: LINK/RINA or its equivalent as approved.

M & L for replacement of old existing/damaged drawer of Table office officer steel with new drawer made out from 1mm thick MS plain sheet to required shape and size ,complete all as directed by Engineer in charge.

M & L for taking out of existing drawer of Table office officer steel and refixing the same in position after repair and denting making shape and size as per drawing and repairing the same in position including fixing arrangement, complete all as directed by Engineer in charge.

M & L for replacement of existing/damaged TOP of Table Office officer steel with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, complete all as directed by Engineer in charge.

M & L for replacement of square hard rubber shoe of Table Office officer Steel of any type to set of 4 nos, complete all as directed by Engineer in charge.

TABLE 3'x2' STEEL WITH DRAWER (FD-1006) M & L for replacement of existing broken/damaged leg of Table 3'X2' steel with drawer with new one, made out from 1.6mm thick, 25mm square tube 760 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged long rail of Table 3'X2' steel with drawer with new one, made out from 1.6mm thick, 25mm square tube 800 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged SHORT RAIL of Table 3'X2' steel with drawer with new one, made out from 1.6mm thick, 25mm square tube 500 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing stiffener of Table 3'X2' steel with drawer, with new one, made out from 1.6mm thick, 25mm square tube, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass lock of Table 3'x2' Steel with drawer, with new one with triplicate keys shall be provided and fixed or as directed by Engr-in-Charge. Make: LINK/RINA or its equivalent as approved.

M & L for replacement of drawer of Table 3'X2' steel with drawer, with new one, made out of 1mm thick PBI sheet, complete with approved quality knob, all as shown on drawing and as directed by Engineer in charge.

M & L for taking out of existing drawer of Table 3'X2' steel with drawer and refixing the same in position after repair and denting making shape and size as per drawing and repairing the same in position including fixing arrangement and complete all as directed by Engineer in charge.

M & L for replacement of existing/damaged TOP of Table 3'X2' steel with/without drawer with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, complete all as directed by Engineer in charge.

M & L for replacement of square hard rubber shoe of Table 3'X2' steel with drawer of any type of set of 4 nos, complete all as directed by Engineer in charge.

TABLE 3'x2' STEEL WITHOUT DRAWER (FD-1007) M & L for replacement of existing broken/damaged leg of Table 3'X2' steel without drawer, with new one made out from 1.6mm thick, 25mm square tube 760 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged long rail of Table 3'X2' steel without drawer, with new one, made out from 1.6mm thick, 25mm square tube 800 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged SHORT RAIL of Table 3'X2' steel without drawer, with new one, made out from 1.6mm thick, 25mm square tube 500 mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing stiffener of Table 3'X2' steel without drawer, with new one made out from 1.6mm thick, 25mm square tube, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing/damaged TOP of Table 3'X2' steel without drawer with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, complete all as directed by Engineer in charge.

M & L for replacement of square hard rubber shoe of Table 3'X2' steel without drawer of any type of set of 4 nos, complete all as directed by Engineer in charge.

TABLE 3'x3' STEEL (FD-1009) M & L for replacement of existing unserviceable stiffener of Table 3'X3' steel with new one 800mm long made out of 25m square MS tube 1.6mm thick, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing broken/damaged legs of Table 3'X3' steel, with new one, made out of 25m square MS tube 1.6mm thick, 760mm long, shape and size as per existing, complete all as directed by Engineer in charge.

M & L for replacement of existing/damaged TOP of Table 3'X3' steel with new one made out of 18mm thick laminated particle board exterior grade with desired finished in one side and balancing white and including providing 4mm thick teak wood beading all around the table top, complete all as directed by Engineer in charge.

M & L for replacement of square hard rubber shoe of Table 3'X3' of any type to set of 4 Nos., complete all as directed by Engineer in charge.

Locker 04 Unit Steel (FD-127(M):M & L for taking out of existing leg from Locker 04 Unit Steel made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, complete all as directed by Engineer in charge.

M & L for replacement of Leg of Locker 04 Unit Steel with new one made out of 1 mm thick MS sheet shape and size all as shown on drawing and as specified including spot welding as required duly painted with two coats of synthetic white enamel paint over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of Door Shutter of Locker 04 Unit Steel with new one made out of 1 mm thick MS sheet and providing 02 Nos 75mm butt hinges for fixing door to locker shape and size all as shown on drawing duly painted with two coats of synthetic white enamel paint over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for replacement of existing Door Shutter of Locker 04 Unit Steel made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged butt hinges 75mm of Locker 04 Unit Steel with new one of 75mm butt hinges (02Nos) each door/shutter including fixing arrangement and spot welding, complete all as directed by Engineer in charge.

M & L for replacement of old broken/damaged existing 'D' shape handle of Locker 04 Unit Steel with new one, complete all as directed by Engineer in charge.

M & L for replacement of 50mm brass lock of Locker 04 Unit Steel with one, complete all as directed by Engineer in charge. Make: Link/RINA or its equivalent as approved.

M & L for removing of existing shelf from Locker 04 Unit Steel made to shape as per drawing by denting and repair the same including fixing arrangement and spot welding, complete all as directed by Engineer in charge.

M & L for removing of shelf of Locker 04 Unit Steel, with new one made out of 1mm thick MS sheet and providing 04 Nos. of cleat for fixing to Locker 04 Unit steel, shape and sizes as per drawing duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as directed by Engineer in charge.

M & L for removing of old painted steel surfaces of Locker 04 Unit Steel, filling, depressed, portion by oil putty, sanding with emery paper/cloth to have smooth surfaces and applying two coats of synthetic white enamel paint over a coat of red oxide primer (wherever necessary) to all exposed surface (internally & externally) by spray machine, complete all as directed by Engineer in charge.

Removing of broken/damaged plastic cane from Chair Verandah (Drg No. FD-359/256) welded joints, painting frame with one coat synthetic white enamel paint and recanning the chair NE MAT pattern with new white plastic cane of 0.50 mm thick & 4mm wide best quality and joints/knots of cane stripe shall be under the seat frame/back frame complete all as directed by Engr-in-Charge.

M & L for replacement of Hard rubber shoes of Chair Verandah (Drg No. FD-259) of any type to set of 4 Nos in one chair, complete all as directed by Engineer in charge.

M & L for replacement of old painted steel surface of ALMIRAH STEEL LARGE 1/2 H x 1/2Sh with one side mirror (FD-1033), filling depressed portion by oil putty, sanding with emery paper/cloth to have smooth surface and applying two coats of synthetic enamel paint over a coat of red oxide primer (wherever necessary) to all exposed surface (internally & externally) by spray machine, complete all as directed by Engr-in-Charge.

All as per item No. 131 here-in-before but for Almirah large steel with shelf (FD-1031/167M)

All as per item No. 131 here-in-before but for Almirah steel Medium 1/2Hx1/2Sh (FD-1034)

All as per item No. 131 here-in-before but for Almirah Med steel with shelf (FD-1032)

All as per item No. 131 here-in-before but for Chair Tubular steel with arms (FD-75(M))

All as per item No. 131 here-in-before but for Chair Tubular steel with out arms (FD-75(M)

All as per item No. 131 here-in-before but for Chair CBA special (FD-120(R)

All as per item No. 131 here-in-before but for Chair easy steel with cushion (FD-21(M).

All as per item No. 131 here-in-before but for FORM without back (FD-78(M).

All as per item No. 131 here-in-before but for DESK STEEL (FD-107).

All as per item No. 131 here-in-before but for STOOL REVOLVING ADJUSTABLE STEEL 3' Height with padded. (FD-354).

All as per item No. 131 here-in-before but for TABLE DINING ORS . (FD-165(M).

All as per item No. 131 here-in-before but for TEAPOY VERANDAH . (FD-255(M).

All as per item No. 131 here-in-before but for TABLE OFFICE CLERK STEEL . (FD-1004).

All as per item No. 131 here-in-before but for TABLE OFFICE OFFICERS STEEL . (FD-1003).

All as per item No. 131 here-in-before but for TABLE 3'X2' STEEL WITH DRAWER . (FD-1006).

All as per item No. 131 here-in-before but for TABLE 3'X2' STEEL WITHOUT DRAWER . (FD-1007).

All as per item No. 131 here-in-before but for TABLE 3'X3' STEEL . (FD-1009).

All as per item No. 131 here-in-before but for SIDE RACK 03/04 SPACES STEEL. (FD-1023).

KOLAY CONSTRUCTION

M/S ROHIT CONSTUCTION

M/S NEHAL ENTERPRISES

M/s Ray construction