Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹25.8 L+₹1.5 L (6.10%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹26.3 L+₹2.0 L (8.27%)Rejected-Finance 97 ABROL NAGAR PATHANKOT 145001 PB | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹28.0 L+₹3.7 L (15.0%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
4 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt Palampur
CERTAIN REPAIRS TO OTM AND MD ACCN OF ZONE C AND D AT PALAMPUR MIL STN
2022_MES_550252_1
GEP-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹60,000
Yes
15 Oct 2022
6 Sept 2022
6 Oct 2022
6 Sept 2022
4 Oct 2022
20 Sept 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed.
Taking down door shutters of any desc exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete etc all as specified and directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving’s not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat and removing unserviceable materials,debris and rubbish to distance not exceeding 100m complete all as specified and directed.
M&L 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.
M&L 25mm thick, plain cement concrete, 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of floor / path surfaces finished even & rough to receive floor finishes, complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm ,cut to size as required in skirting/dado over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm cut to size as required in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm (including size 600mm x 600mm), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified.
M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm (including size 600mm x 600mm),cut to size as required in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:4 complete all as specified.
M&L Glazed ceramic coloured tiles in vertical surfaace 350mm x 250mm x 7mm/450mm x 350mm x 7mm/ 450 x 300 x 7mm/ 600 x 300 x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.
M&L 2nd class hard wood, plain solid,straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints as specified and directed.
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed.
S&F pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F 100 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and directed.
S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F well seasoned 2nd class hard wood small fitting such as cleats, brackets of any type,latch and hinge blocks,shaped door and windew stops and the like including all necessary labours articles n.exc 200 Cu.cm each including 50 mm size cold rolled mild steel medium weight butt hinges, complete all as specified and as directed
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square exc. 0.5 sq.m in each pane complete all as specified and as directed.
S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,metal frames including punching or drilling out old glazing pins/spring clips , or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:6) on stone/brick masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.
M&L rendering 15mm thick plaster in cement mortar(1:4) on stone/brick masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.
M&L prepartion of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L prepartion of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L preparation of new plastered surfaces of walls and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 1mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.
M&L preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats distempering with first quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,of approved manufacturer,of required shade and colour complete as per manufacturer's specification over and including 1mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified and directed.
M&L preparing newly plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat primer complete all as specified & directed.
M&L preparing old plastered or un-plastered surfaces of walls and applying one coat of cement base paint complete all as specified & directed.
S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified.
M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed
M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed.
M&L preparation of old steel surfaces of any description not otherwie described, over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.
M&L preparation of new zink (or galvanised) surfaces to receive painting,by coating with mordant solution including washing and cleaning of any description not otherwie described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink crome primer, complete all as specified and directed.
Dismantling boarding,any description,fixed in position with screwss, complete all as specified and directed.
S&F 18/19mm thick prelaminated particle board/ MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed by Engineer-in-charge.
S&F 75 mm size, hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as directed.
S&F 40 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engineer-in-charge.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing unserviceable water tank complete all as specified and directed.
S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing unserviceable water tank complete all as specified and directed.
S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed.
S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed.
S&F in repairs viterous china, wash hand basin with pedestal (white) of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed.
S&F in repairs 32 mm size waste fittings, brass chromium plated for glazed ware sinks,basins,etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other complete all as specified and directed.
S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod complete all as specified & directed.
S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F in repairs stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.
S&F in repairs PVC connection 15 mm size, 600 mm long with PTMT nuts complete all as specified and directed.
S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified & directed.
M&L in repairs 75 mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed.
M&L in repairs 100 mm size cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete including taking down old unserviceable floor trap complete all as specified & directed.
Taking up or down 15 mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
S&F steel water tubing, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.
S&F steel water tubing, 20 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.
Fixing only steel water tubing, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. Note: The GI tubing obtained from taking down used in this item.
Fixing only steel water tubing, 20 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed. Note: The GI tubing obtained from taking down used in this item.
Dismantling of old rested plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed. Note: The
S&F 0.80 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)
M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)
M&L second class soft wood clean sawn timber scantling for ceiling, roof truss etc including taking down old unserviceable timber scantling complete all as specified and directed.
M&L second class soft-wood plain fillets square or rectangular in sections bull-nosed ,splayed, rounded on one edge or face area exc 13 sq.cm but not exc. 25 sq.cm secured with nails or brads complete all as specified & directed.
M&L second class soft-wood plain fillets square or rectangular in sections bull-nosed ,splayed, rounded on one edge or face area exc 6 sq.cm but not exc. 13 sq.cm secured with nails or brads complete all as specified & directed.
M&L 4mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling flat or sloping complete as specified and directed.
S&F 6mm thick E-board (classic) false ceiling of size 600x600 mm fixed in and including anodised aluminium snap grid frame work 605mm x 605mm for false ceiling including hangers 6mm dia GI(upto1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. flat iron of size 40mm X 3 mm, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards,any thickness, including cover fillets, complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. including taking down old unserviceable chowkhat complete all as specified and directed.
S&F 5.5 mm thick sheet glass ordinary quality, plain or frosted fixed to aluminium frame of partition etc fixed with rubber gasket and aluminium power coated snap beading etc complete all as specified and directed.
S&F powder coated anodised aluminium door shutters (any colour as aapproved by GE, thickness of power coating not less than 50micron) aluminium section weighting 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door,hinges, anodised aluminium power coated snap beading screws etc. including taking down old unserviceable shutter complete all as specified and directed.
S&F powder coated anodised aluminium window and ventilator,shutters, (any colour as aapproved by GE, thickness of power coating not less than 50micron) fixed type without sash bar, aluminium section weighting 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,power coated snap beading screws etc including taking down old unserviceable window/ventilator complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality, plain or frosted not exceeding 0.50 square metre in each pane complete all as specified and directed.
S&F brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.
S&F in repair brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed.
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F aluminium (extruded section body) door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
S&F in repair aluminium (extruded section body) door coser hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
S&F, in repairs,Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified & directed.
M&L second class soft woodclean sawn timber scantling to replace old and decayed timber(including piecing,scarfing,etc,old and new timbers if required) and removing defective portion remove from site and credited to contractor complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.
M&L complete removal of roof treatment including APP membrane,PCC padding, plastering, brick bat etc, and preparing the surface of roof slab by brushing with wire brashes for removal of loose materials etc and sweeping with brooms, gunny bags and finally remove dust by compressed air by compressor, complete all as specified and directed.
M&L applying neat cement slurry with 3Kg of cement slurry per sq.m mixed with liquid water proofing compound on surfaces of roof and platering 15 mm thick in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer's instructions and finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.
M&L one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 and laid a layer of APP polymeric membrane 3mm thick (minimum) weighing 3.0 kg per sqm reinforced with polyster non woven fabric (weight not lass than 150gm/sqm) by toarch application method complete all as per manufacturer instructions and sealing all the over lap shall be minimum 75mm in length side and 100mm on with side. complete all as specified and as directed.
Supply only liquid water proofing compound complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
S&F framed brackets of angles or tees with web and flange cut to shape,drilled and countersunk for screw,includinf bending and welding angles,as necessary,gusset plates,riviting,etc n exc 10kg each brackets,conforming to Fe.290 Gde-E-165(brackets over 10Kg each to be measured under structural steel) complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, (RCC jalli ) complete all as specified and directed.
Providing 35mm precast cement concrete louvers and jallied,(mesured solid),1:2:4 type B-0 using 12.50mm crushed stone aggregate including all mouldings but excluding frame (precast frame shall be measured separately) complete all as specified and directed.
M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .
Demolition of stone slabs and tiles of any description (paver block) or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.
Dismantling of 100/110mm bore CI/PVC/AC pipe waste, vent,rain or drain pipe including fitting (like bends, T, junction,reducer etc) complete all as specified and directed.
Dismantling of 75mm bore CI/PVC/AC pipe waste, vent,rain or drain pipe including fitting (like bends, T, junction,reducer etc) complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps or laid in trenches or floor,complete all as specified and directed. Note:-The cost of stack clamp also included in this item.
S&F 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls with stack clamps or laid in trenches or floor,complete all as specified and directed.Note:-The cost of stack clamp also included in this item.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm bore, PVC (SWR) branch piece, single (singleY) equal or unequal complete all as specified.
S&F 75 mm bore, PVC (SWR) branch piece,single (singleY) equal or unequal complete all as specified.
S&F 110 mm bore, PVC (SWR) branch piece,double (doubleY) equal or unequal complete all as specified.
S&F 75 mm bore, PVC (SWR) branch piece,double (doubleY) equal or unequal complete all as specified.
S&F 110 mm bore PVC (SWR) junction, (single T) equal or unequal ,complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction, (single T) equal or unequal ,complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction double, (double T) equal or unequal ,complete all as specified and directed.
S&F 75 mm bore PVC (SWR) junction double, (double T) equal or unequal ,complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .