Landscaping of Manpur Head

Amount

Boring with casing pipefor tubewell in all soilsexcept ordinary hard rocks requiring blasting including removing the casing pipe after the tubewell is lowered &tested equipment as required such as hand boring machine and its accessory transportation to site and vice versa etc. Complete in all respect boring with 200 mm id housing pipe upto 150 m depth BGL.

Supplying, assembling lowering and fixing in vertical position in borewell, unplasticised, PVC medium well casing (cm) pipeof required dia, conforming to IS :1281-2010, Including required hire and labour charges ,fitting & accessories etc. all complete for all depths, as per direction of Engineer-in-charge (150mm nominal size dia)

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized, PVC medium well screen (RMS) pipes with ribs. conforming to IS 12818, including hire and labour charges fitting & accessories etc. all complete, for all depths ,as per direction of Engineer-incharge (150mm nominal size dia)

Supplying at site wooden box of suitable size with lid & locking arrangement for preserving strata sample collected form the bore

Supplying & fixing of well cap having thread to fix on housing pipe complete in all respect. (150 mm dia)

Supplying & fixing of M.S. clamp of size 150 mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost MS Flat & Bolts Of Suitable size complete in all respect.

Supplying at site gravel of 1/16" to 1/8" sizes including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from dust, dirt or the vegetable manner as per IS 4097/1967 with latest amendments.

Three Phase Submersible Pump Set 22 kiloWatt 45000 LPS (Discharge head 102m) complete in all respect as per specifications and quality required by engineer in charge.

Schedule 40 Type Cpvc Industrial Pipe Nominal size 2 inch complete in all respect as per specifications and quality required by engineer in charge.

Submersible 3 core cable 1.50 mm 2 complete in all respect as per specifications and quality required by engineer in charge.

3 HP Starters Control Panel for Submersible Pump complete in all respect as per specifications and quality required by engineer in charge.

Provision of line charge & Electric connection (Lump sump).

Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. ( Total land 20590 *60%)

Excavation in dumped stone or malba including stacking of unserviceable material separately and disposal of unserviceable material. Lead up to 50 m and lift up to 1.5 m, disposed material to be neatly dressed in all kinds of soils.( building -360 sqm +65 sqm = ) and height of malba 0.5m

Providing and planting of trees Supplying and planting permanent trees having minimum height of 1.8 m and minimum caliper of 2.5 cm in prepared pits and watering. Supplying & planting of healthy permanent tree plant with khurpa, fixing the earth ball position and making raised edge around the pit after planting and watering the plant before and after planting complete in all respect by the contractor as per the satisfaction and direction of Engineer-in-charge. (C.S.R NO.32.14)

Providing and Planting Specimen plants Providing and Planting specimen plants in prepared pits and watering. Supplying & planting of healthy specimen plants with khurpa, fixing the earth ball position and making raised edge around the pit after planting and watering the plant before and after planting complete in all respect by the contractor as per the satisfaction and direction of Engineer-in-charge.

Digging of pits for tree plantation Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control.The pit shall be filled with mixture of 30% Farm Yard Manure and 70% soil and Chlorpyriphos @ 10 ml per pit shall be added to the mixture. The mixture shall be filled into the hole and then profusely watered to enable the soil to subside. The refilled soil shall then be dressed evenly with its surface at level with the adjoining ground level or as directed by the Engineer-in-charge.(C.S.R NO.32.13)

Providing and planting of ordinary doob grass Rough grassing including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, levelling and dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting doob grass in rows 15 cm apart in both directions, watering and maintenance till first mowing. Single Super phosphate @ 30 gm/sqm shall be mixed in the top layer of soil. Before commencing the operation of planting, the soil shall be suitably moistened with 5cm layer of water.Urea @ 5 gm/sqm shall be applied after the grass has established and started growing.The grass shall be maintained by regular watering and weeding till first mowing.(C.S.R NO.32.5)

Providing and Planting ground covers (Ordinary) Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row. (C.S.R NO.32.26)

Planting seasonal flower in beds Planting seedlings including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of seedlings at 20cm distance from plant to plant and row to row. (length of walkway 6000*30%)(C.S.R NO.32.22(A))

Providing and fixing pair of Plastic dustbins Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. (C.S.R NO.32.75)

Supply and installation of garden bench © Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg)(C.S.R NO 32.57c)

Hiring of Front End loader 1 cum bucket capacity for removal of malba,soil and other etc for total land area

Hiring of Tractor Trolley for miscellaneous works at site ( for total land area) Item will be paid on the basis of actual work done.(2.59)

Supplying plant in 30 cm cement pots for outdoor display at site of work.

Prefabricated Restaurant (30foot X 40foot) Supply, Erection And Fabrication Of Steel Structure With Foundation Main Structure Made By 75mm X 75mm For Strength Building 75 X 40. Overall Structure Should Be Of MS Rectangular Tubes Of TATA/JSW M.S Pipes. All Structure Should Be Fully Welded With MIG Welding/ARC. Structure Should Be Painted With 2 Coats ENAMEL Of ASIAN/BERGER. Including Mezzanine Floor and 2x2feet Tiles. Civil Work: 1. 2FT Grounded DIG For Column Beam Sets For Anchor Bolting And Plates Fixing.2. PCC In Foundation With Cement Concrete Of Min. M10 Grade Including Machine Mixing, Consolidation, Finishing, Ramming, Curing. Finishing: 1. Vitrified Tiles for Flooring Including Finishing With Skating and Side Boundaries. WALLS: - External & Internal Walls Should Be Of Min. 12mm Cemented Fiber Boards With Waterproof Texture Paints Coatings Plus Wallpaper. Both Finished With Texture And Standard Paints. ROOF: - External Roofing Will Be Of Corrugated Sheets Panels Min. 0.5mm PREPAINTED GALVALUME STEEL SHEETS. Internal Roofing Will Be Of PVC Panelling (Hut Type) Standard Or Gypsum GRID CEILING 2FTX2FT.INSULATION: - 75mm Insulation Of ROCKWOOL Density 144 DP Will Be Insulated Through Walls And Roof. DOOR AND WINDOWS: -UPVC Door And Windows As Per Design, Window Will Be Sliding Min. 5mm Glass,Min. 8mm Glass Of SAINTGOBAIN/MODIGUARD/Equivalent Powder Coated Section As Per Preferred Look. ELECTRIC WORK: - All Electric Fitting With HAVELLS / ANCHOR/NORISYS/Equivalent Switch, 20AMP Point For A.C & Main Switch Board, Wiring-4mm For A/C Points, Geyser, And Heater. 2.5mm For SOCKETS And 1.5mm For Lights. MCB for Main Connection and Other Accessories and LED LIGHTS (20watt) - As Suitable Lighting For Interior Designing. Invertor Point WIFI Point. TOILET/BATHROOM: - 7X4 Toilet Included. It Can Be Inside Or Outside As Per Requirement. Sanitary Includes One English Western Closet (EWC), One WASHBASIN, URINAL With Taps And Accessories Of PARRYWARE OR CERA Or Equivalent.

Portable Verka Booth (15FT X 15FT) Supply, Erection and Fabrication of Steel Structure with Foundation STRUCTURE: - Main structure made by 75mm x 75mm for strength building 75 x 40. Overall Structure should be of MS rectangular tubes of TATA/JSW/Equivalent M.S Pipes. All structure should be fully welded with MIG Welding/ARC. Structure should be painted with 2 coats ENAMEL of ASIAN/BERGER/Equivalent. Including mezzanine floor and 2x2feet tiles. FLOOR: - Civil Work: 2FT grounded DIG for column beam sets for anchor bolting and plates fixing. PCC in foundation with cement concrete of Min. M10 Grade Including machine mixing, consolidation, finishing, ramming, curing. Finishing: Vitrified Tiles for flooring including finishing with skating and side boundaries. WALLS: - External & Internal walls should be of Min. 12mm Cemented fiber boards with waterproof Texture paints coatings plus Wallpaper. Both finished with texture and Standard Paints. ROOF: - External Roofing will be of Corrugated Sheets Panels min. 0.5mm PREPAINTED GALVALUME STEEL SHEETS. Internal roofing will be of PVC paneling (Hut Type) standard or Gypsum GRID CEILING 2FTX2FT.INSULATION: 75mm Insulation of ROCKWOOL density 144 DP Will be insulated through walls and roof. DOOR AND WINDOWS UPVC Door and One Window with Rolling Shutter as per design, Window will be sliding 5mm glass, 8mm glass of SAINTGOBAIN/MODIGUARD Powder Coated section as per preferred look. ELECTRIC WORK: - All electric fitting with HAVELLS / ANCHOR/NORISYS switch, 20AMP Point for A.C & Main switch board, Wiring-4mm for A/C Points, Geyser, and Heater. 2.5mm for SOCKETS and 1.5mm for lights. MCB for main connection and other accessories and LED LIGHTS (20watt) - As Suitable Lighting for interior Designing. Invertor Point WIFI Point.

Earth work excavation in ordinary soil, exclusive of compensation of earth:-Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods.

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete a

Precast Cement Concrete Kerb Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per

Fountain Product Specification Material FRP Color Any Colour Product Type Water Fountain Design Modern Usage/Application Garden, Park, Out Door, Entrance of the Building Dimension 15-18. Feet Nozzle Diameter 2.5 mm Brand AFG Brand Light Type LED Brightnes

Fixing of fencing with MS angles 25 x 25 x 3 mm, 1.5 m above ground fixed 30 cm in ground at 3m with cement concrete 1:2:4. Net to be fixed with nut bolts with washer at three places and one 4 mm GI wire running through the net at top and bottom for stability and strength.

cement concerete 1:2:4 mechanical mean

Unbranded Air Walker/ Stroller Single

DIVYA FIBRE PRODUCTS & OUT DOOR GYM EAUIPMENT--DIVYA FIBRE PRODUCTS & OUT DOOR GYM EAUIPMENT Garden Swing with seat without roof 2 - seater

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of exc

Cement concrete 1:8:16 with stone ballast 20 mm gauge in foundation and plinth

Reinforced cement cocrete M-20 mechanically batch mixed using batch type concrete mixer as per IS: 1791 and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in superstructure.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

12.5 mm thick cement plaster 1:4 ( same as 16.65)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Scraping cement plaster

12.5 mm thick cement plaster 1:4 ( same as above)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

MCB Double Pole 6-32amp. (10kA, Curve- C)

MCB Four Pole 6-32amp. (10kA, Curve-C)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.5 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4.0 sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core

Supply & erection of PVC Casing 'n' Capping (Double Lock) ISI marked for wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:- PVC Casing 'n' Capping Size 20mm x 12mm

Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Double Pole 32amp., Sensitivity 30mA

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N Double Door Distribution Board 12 way each

Supply and erection of sheet metal busbar chamber (factory fabricated) duly powder coated on existing surface with required 4Nos. of tin plated copper busbar strips of suitable length and crosssectional area mounted on DMC/ SMC moulds at sufficient distance, enclosure made of M.S. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/rag bolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge at site:- Bus Bar Chamber 63amp., 415volts Overall Dimensions (300mm x 345mm x 120mm) nominal

GI PIPE POLES: Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- G.I. Pipe Pole 4 metre Long, Dia. 65mm, Planting Depth 80cm with Pit Depth 95cm.

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-ii) Double Walled Corrugated HDPE Pipe 63/51mm (Outer/ Inner dia.)

Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitablr size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20kg) including fixing the copper wire run through 20mm dia. G.I pipe (A-Class) recessed in wall and in floor etc.up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class), suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm (Heavy) around the hole of excavation: (a)Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long .

Size 10 Sq. mm. 4 Core PVC Aluminium conductor armoured Cable

Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. (a) Water Cooler Full Steel Body 40/80 ltr Capacity without Stablizer

Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect.

12 Watt White LED type Solar complete in all respect as per specifications and quality required by engineer in charge

Providing LED Flood Light Power 100W complete in all respect as per specifications and quality required by engineer in charge

Providing LED Batten 36W complete in all respect as per specifications and quality required by engineer in charge

Unbranded Decorative Lighting Pole of Cast Aluminium with Single Arm complete in all respect as per specifications and quality required by engineer in charge

Unbranded Aluminium & Glass with Sandblasting LGP Track Light, 9 Watt Watt complete in all respect as per specifications and quality required by engineer in charge

Boring/drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer – in-charge, upto 90 metre depth below ground level. (A) All types of soil ( c) 400 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe ofrequired dia, conforming to IS: 12818-2010,including required hire and labour charges,fittings & accessories etc. all complete, for all depths, as per direction of Engineer – incharge. (c) 200 mm nominal size dia.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- n- charge. 200 mm nominal size dia.

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect.

Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 200mm internal diameter

"Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in- charge (a) Capacity of Air compressor 300 cfm at 250 PSI"

Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in charge.

Cement concrete 1:2:4 (a)With stone ballast or shingle (i) mixing by manual means

Supply & Installation of mechanical flow meter (100mm Dia) complete in all respects

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects. Earth work upto 1.5 m. Depth (i) All classes of soil except rocky

Cement concrete 1:4:8 (a) with stone ballast 20mm gauge (i) mixing by manual means

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

12.5 mm thick cement plaster 1:4

Coarse sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry)

Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry).

Bajri (Coarse) screened, cleaned and washed and graded from 20mm to 25mm (from Pathankot or approved equivalent quarry).

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting,jointing and testing complete as per specifications. (xxviii) 160mm o/d pipe of 2.5 Kgf. /sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications. xxix 200mm o/d pipe of 2.5 Kgf. / sqcm

Foot Rest for Manhole. Providing orange colour safety foot rest of minimum 6mm thick plasticencapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786having minimun cross section as 23mmx 25mm and over all minimum length263mm and width as 165mm with minimum 112mm space betweenm protruted legs having 2mm tread on topsurface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemicalresistance test as per specification andhaving manufacturer's permanentidentification mark to be visible even after fixing, including fixing in manholeswith 230x150x75cm cement concrete block

Reinforced cement concrete M-20 mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steelreinforcement centring and shuttering in foundation and plinth.

Informatory Sign Board 800X600mm rectangular as per IRC 67-2012 with high intensity microprismatic grade retro reflective sheeting as per ASTM D 4956 -09 and as per IRC 67-2012 fixed over 4mm thick aluminium composite material(ACM)sheeting having aluminium skin thickness of 0.4-0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @200mm c/c to back support frame of 25X25X3mm angle iron supported on a square hollow steel section post 60X60X302mm conforming ti IS 4923without cost of defination plate firmly fixed to ground in foundation concrete M-25 of size 0.45X0.45X0.60m for vertical post complete as per clause no. 801 of MORT&H specification. Supplier shall provide a warrenty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting &a certified copy of a test reports from an independent test lab conforming to clause no. 6.7 of IRC 67-2012.a) using high intensity microprismatic grade retro reflective sheeting type XIas per ASTM D 4956 09 and as per irc 672012

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

90mm o/d H.D.P.E pipe of 6 Kg. PE-80

63mm o/d H.D.P.E pipe of 6 Kg. PE-80

EXCAVATION WORK Earth work upto 1.5 m. Depth for all classes of soil except rocky. Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, atching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

pop up rotor complete in all respect as per specifications and quality required by engineer in charge

service saddle complete in all respect as per specifications and quality required by engineer in charge

swing joints complete in all respect as per specifications and quality required by engineer in charge

control valve 90mm complete in all respect as per specifications and quality required by engineer in charge

control valve 63mm complete in all respect as per specifications and quality required by engineer in charge

screen filter 30mm 3 /hr or disc filter complete in all respect as per specifications and quality required by engineer in charge

ventury and mainfold 2" complete in all respect as per specifications and quality required by engineer in charge

by pass assemble 2" x1.5" complete in all respect as per specifications and quality required by engineer in charge

6" C.I. Butterfly Valve

4" C.I. Butterfly Valve

Any Other Items

AMANDEEP SINGH CONTRACTOR