CA NO GE(N)AMB-04/2025-26 PROVN OF CERTAIN SANCTION WORK OF UNDER AGE B/R-II GE (NORTH) AMBALA CANTT

Amount

Schedule 'A' Part-I (B/R itmes) Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles ,complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete, all as specified and as directed by the Engineer-in-Charge.

All as per serial item No. 02 here in before but except bricks (old serviceable bricks obtained from serial item No. 01 above including removing motar, cleaning the bricks with water, shall be used) complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for brickwork with subclass `B` bricks, in straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and as directed by the engineer - in-charge

Material and labour galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair , complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair concealed stop cock chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair ,complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair , complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC as in repair ,complete, all as specified and as directed by the Engineer-in-Charge.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc., complete, all as specified and as directed by the Engineer–in–Charge.

Material and labour for rendering 15mm thick in cement plaster (1:4) on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement, including necessary scaffolding etc., complete all as specified and as directed by the Engineer–in–Charge.

Material and labour for rendering 15mm thick in cement plaster (1:6) on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement, including necessary scaffolding etc., complete all as specified and as directed by the Engineer–in charge.

Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of old decorated brick/concrete, plastered / unplastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper with painting roller over prepared surfaces of ceiling etc. complete all as specified and as directed by the Engineer-in-Charge.

Complete removal of existing treatment on walls by with mechanical / electrical driven grinders suitable for removal work and scrapping washing rubbing down etc and applying two coats of oil bound emulsion over and including two coats of acrylic based wall care putty, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for preparation old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description area exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing the same from site complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm pre-laminated PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with pre-laminated sheet and fixed in opening complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick pre-laminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of 150 mm long aluminium handle cast type anodised complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of butt hinges 100mm long of stainless steel, medium weight, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 18mm thick lead free PVC celuka ply ( minimum density 600 Kg/ Cum) of both side plain of approved colour other than white colour fixed with stainless steel screws and solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer's specifications/ instructions complete all as specified and as directed by the Engr-in-charge.

Supply and fixing as in repair of Continuous (piano) hinges, width of flaps 30mm mild steel, bright finish or electro galvanised complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

M&L non skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in cement mortar (1:6) , complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar (1:6), complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Non Skid coloured ceramic tiles joint free premium/1st quality of same description as of floor tiles in serial item No. 33 here in before but 100mm to 200mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/skirtings/dados of size 300x450 x7mm or 300x 600x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 10mm thick vitrified coloured paver tiles of size 300 x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. Note- This item shall not be executed in the location, where seperate dismantling of tiles only have been done.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and directed by the Engineer-in-Charge..

Demolition of mud in roof any thickness whether full thickness removed or part thereof including plaster & leaping including removal the rubbish/ demolished material outside defence land, complete all as specified and directed by the Engineer-in-Charge..

Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :– (i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only , complete, all as specified and as directed. (iv) The work shall be carriout at a height upto 12 metre.

Material and labour cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar (1:6) , complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) kitchen plateform / flooring/ wash basin counters laid over and including 20 mm thick screed bed in cement mortar 1 :6 and jointed and pointed with cement mixed with pigment to match the shade of stone including cutting opening ( of any shape and size ) , cutting,rubbing and polishing surface and rounding of edges and as any colour as approved by GE complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in vertical surface as in skirting, steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick rendering in cement mortar (1:4) incl rounding of front edge complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair 110mm dia UPVC soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed by the Engineer-in-Charge..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing 110mm dia UPVC soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches, complete all as specified and directed by the Engineer-in-Charge..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete, all as specified and as directed by the Engineer-in-Charge..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete, all as specified and as directed by the Engineer-in-Charge.(Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534)

Supply and fixing 110 mm bore PVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for providing precast RCC (1:2:4) type B1, using 20mm graded crushed stone aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weathering, throating, etc. and setting in cement mortar (1:4), complete with joints to match, complete all as specified and as directed by the Engineer-in-Charge.

Material and labour formwork to soffits of suspended slabs such roof slab, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) flat for rough finished surfaces of concrete , complete all as specified and as directed by the Engineer-in-Charge.

Material and labour formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, for roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge

Material and labour TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of fixing GI OREO Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sq, both side inclusive) consisting of main "I" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T"of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised bullerily level clips of size 85 x 30 x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Gl Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of Gl sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum). including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece complete all as specified and as directed by the Engineer-in-Charge. DEXUNE or Equivalent.

Material and labour 75 mm thick PCC (1:4:8), Type D–2, using 40mm graded crushed stone aggregate as in sub base of floor etc and finished even and fair without using extra cement complete, all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, manholes or for laying cable etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed by the Engineer-in-Charge.

M&L preparation of new plastered/ unplastered surfaces of brick/ concrete wall and applying two coats of white lime wash, complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for Brushing neat cement slurry with 3.0 kg of cement per sq. metre etc.complete, all as specified and as directed by the Engineer-in-Charge.

M&L for cement concrete Type B–1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in PCC padding, paving, coping, roof kerbs or mud stops, rounded, door cill, hold fast and other like works complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 30 mm thick fiber glass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge

Supply and fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed as in repairs,complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Magnetic door catches of standard size 50 x 25 mm for cupboard doors approved by GE complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminium sheet, 0.5 mm thick, fixed with aluminium alloy screws/nails complete all as specified and directed by Engr-in-Charge.

Supply and fixing of stainless steel fancy type peg set ( each peg set having 5 Nos hook) and fixed with stainless steel screws and PVC rawal plug as in repair, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair brass chromium plated single lever basin hot and cold water mixer with long neck 15 to 20 mm out popup and 450 mm long braided hoses, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair brass chromium plated wall mixer with hand shower arrangement with connected leg with wall flange & wall bracket for hand shower, complete all as specified and directed by Engr-in-Charge.

Supply and fixing as in repair chromium plated soap dispenser with glass bottle, complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel towel ring round between flanges including fixing with brass screws, complete all as specified and directed by Engr-in-Charge.( Make- Jaguar Cat No- SQN -7721or equivalent in make given in Appx 'B'.)

Supply and fixing soap dish, brass chromium plated, approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws as in repair, complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing as in repair chromium plated overhead shower 200mmx200mm square shape single flow ABS body chrome plated with grey face plate with rubit clean system complete all as specified and directed by Engr-in-Charge.( Make- Jaguar Cat No- OHS - 35497 or equivalent in make given in Appx 'B'.)

Supply and fixing as in repair chromium plated corner glass self set of three with bracket complete all as specified and directed by Engr-in-Charge.( Make- KICH Cat No- GSC 1155 or equivalent in make given in Appx 'B'.)

Supply and fixing as in repair chromium plated hand shower ( health faucet) with 8 mm dia 1 mtr long flexible tube and wall hook complete fixed to wall, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing counter top wash hand basin size 440x525x195 including 32 mm dia brass chromium plated waste coupling with pvc pipe as approved by Engr-in-charge/GE complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) including water closet pvc seat cover white closed pattern with flat bottom and cover including making connections and fixed in position as in repair, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repair brass toilet paper holder with flap chromium plated complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing stainless steel, towel rack 600 mm long, complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas upto any height, complete, all as specified and as directed by the Engineer-in-Charge. (Reinforcement shall be be measured separately).

Supply and fixing 5-8mm thick solid/ Hollow profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for aluminium alloy anodized (powder-coated) door frame and shutters with hollow aluminium anodized sections as specified including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Door Frame single groove 101.6mmx44.45mmx2.15mm thick (b) Shutter top 47.62mmx44.45mmx1.95mm thick. (c) Shutter bottom 114.30mmx44.45mmx2.15mm thick (d) Shutter vertical 85mmx44.45mmx1.80mm thick (e) Shutter middle 83.5mmx44.45mmx2.40mm thick (f) Gauging clip weighing not less than 0.097kg/metre (Note : 1. The rates shall be inclusive of provision of Glass pane shall be measured and paid separately.) .Manufacturersof section : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or any other equivalent approved by GE.

Supply and fixing for aluminium alloy anodized (powder-coated) window frame with double shutters openable/sliding type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately.

Supply and fixing 12 mm thick prelaminated particle board interior grade prelaminated both side with decorative choice laminations and fixed with aluminium frame work or screws to timber frame work, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 4mm thick glass sheet ordinary quality, frosted on one side, in square n exc 0.5 Sqm in each pane, fixed with aluminium beading in aluminium window/ventilation etc. complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing aluminium powder coated Grill (DECO grill, DG 103 of7.5 mm thick of M/s ELESAR, M/S Royal Grill, M/S National Grill Associated Profiles & Aluminium Ltd.) fixed with suitable 'F' section(No. 8584)15.30 x 23.40 x 1.40mm(minimum), fabricated and riveted to aluminium windows/ventilator complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed ,complete, all as specified and as directed by the Engineer-in-Charge.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil,complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour Plain cement concrete 1:2:4 Type B2 as in surface channels, drains, including weathering, slightly rounded or chamfered angles and throating incl use of formwork (straight or curved) complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, includingforms, moulds, mitred/stopped ends etc.complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete, all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Schedule 'A' Part-II (E/M items) Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc. complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately .

Description all as per serial item No.95 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge.

Description all as per serial item No.95 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed by Engineer-in-Charge.

Description all as per serial item No.95 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of modular socket outlet pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing as in repair electronic Fan regulator modular 100 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair LED batten fitting 18-20 watt, 4 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LUMILINEPLUSNEOBS20WLED830SPCSSIND of make Havells or equivalent in make given in Appx 'B'.

Taking down LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V before execution of work and and refixing the same after completion of work including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by the Engineer-in-Charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811955 of make Indo Asian or equivalent in make given in Appx 'B'.

Supply and fixing LED flat panel 2' x 2' size fully difused surface/ recess mounted fitting (grid/ gypsum type) 36-40 watt , 5700K, warm/cool white with powder coating and CRCA front cover including frame with provision of PVC flexible copper conductor cable from ceiling rose to light fitting as in repair complete all as specified and as directed by the Engr-in-charge. Cat part No.VENUSNEO2X2PLR36WLED857G2 of make Havells or equivalent in make given in Appx 'B'.

Supply and fixing in repair, LED Bldg Security Light Fittings of capacity 20 -25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, complete all as specified and as directed by the Engineer-in-Charge. Cat part No.ENDURASUNDOWNSL25WLED765PASYBOTGIHD of make Havells or equivalent in make given in Appx 'B'.

S & laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

S & laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length.

Supply and fix MCB SPN 32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811826 of make Indo Asian or equivalent in make given in Appx 'B'.

Supply and fix sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral with double door fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811828 of make Indo Asian or equivalent in make given in Appx 'B'.

Supply and fix sheet metal enclosure triple pole & neutral(TPN) IP-54 with MCB 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. Cat part No.811856 of make Indo Asian or equivalent in make given in Appx 'B'.

Supply and laying XLPE insulated, armoured heavy duty electric cable 25 sqmm cross sectional area, 4 core with aluminium conductor, 1100 volts grade as in repair complete all as specified and as directed by Engineer-in-Charge. Note: Excavation & earth with shall be measured under respective item of BOQ

Supply and laying XLPE insulated, armoured heavy duty electric cable 16 sqmm cross sectional area, 2 core with aluminium conductor, 1100 volts grade as in repair complete all as specified and as directed by Engineer-in-Charge. Note: Excavation & earth with shall be measured under respective item of BOQ

Supply and laying well burnt brick class-B laid flat to cover the cable width equal to the length of cable and abutting each other for protection of cable complete all as specified and as directed by Engineer-in-Charge.

M&L dry sand cushoning to cable i.e 8 cm before laying cable in trenches and 15 cm after laying the cable and compacting complete all as specified and as directed by Engineer-in-Charge. Note: punned thickness shall be measured for payment.

S&F as in repair light grade GI Tubing of size 40mm dia for cable protection and fixed with clamp to pole and wall with nut, bolts, washers complete all as specified and as directed by Engineer-in-Charge

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth strip 25 x 3mm thick by means of bolts, nuts, check nuts and washers of galvanised iron.Earth strip protected by GI pipe 32mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion .

Taking down electric water heater, before starting of work and refixing the same after completion of work alongwith new fastner complete, all as specified and as directed by the Engineer-in-Charge.

Taking exhaust fan, before starting of work and refixing the same after completion of work alongwith new fastner complete, all as specified and as directed by the Engineer-in-Charge.

Note:- Amount of credit of Rs.49,401.00 for retrieved materials is mentioned in Schedule of Credit Page No.126. of tender documents in pdf form which will be deducted offline while acceptance of tender.

Ashwani Kumar (BID ID -3304186)

Swami Enterprises (BID ID -3299703)

M/S Gurpreet Singh (BID ID -3300938)

R.D Builders (BID ID -3301203)