RENOVATION OF GUEST HOUSE (D-2-1)

Providing and laying putty on walls /ceiling of two or more coats until the undutations and irregularities in the surfaces disappear and a smooth surface is obtained. The putty shall be applied in one or more coats and do scrubbing, sanding and finish the surfaces after the application of each coat including preperation of the existing wall, cleaning, etc. (The putty shall be of JK wall putty, Asian paints, Birla white make etc.).

Painting with premium quality plastic emulsion paint two coats to walls over a priming coat with cement primer after cleaning the surfaces including scrubbing and removing the existing deteriorated paint, smoothening the surface with sand paper, cleaning the surfaces, cost of all labour,materials and scaffolding etc.at all heights.

Painting with syntheticc enamel paint two coats of approved quality and colour to new/old surfaces of structural steel works doors, windows of steel/wood etc.after rubbing with sand paper and cleaning well the surfaces including cost of all labour, materials and scaffolding etc.at all heights.

Painting with Zinc chromate yellow primer one coat to structrural steel work steel windows, MS grills, MS guard bars, MS ladder etc.including rubbing with sand paper and cleaning the surfaces well including all labour,materials and scaffolding etc.at all heights

Painting to ceiling with plastic emulsion(Ace, nippon) one coat over a coat of cement primer including washing and cleaning the surface etc complete at all heights

Providing and laying 9 mm thick or nearest size first class tiles double charge vitrified tiles of size 120x60 cm for floor (approved make) over special adhesive, filling the tile joints with matching colour epoxy (laticrete, mapei , weber or equivalent) using suitable spacers ,finishing neat to lines and level. The tile colour, design & pattern of laying shall be as directed by the engineer in charge.

Providing and laying 9 mm thick or nearest size first class light colured antiskid vetrified tiles of size 120x60 cm for floor (approved make) over cement mortar 1:3, 20mm thick and necessary cement grout, filling the tile joints with matching colour epoxy (laticrete, mapei , weber or equivalent) using suitable spacers ,finishing neat to lines and level, including removing the existing mosiac/ tile lining from floors and disposing the debrices pointed out anywhere within the company premises etc. complete.

Dismatling and removing the existing mosaic tiles / vitrified tiles, tile lining and plastering the walls with Cement mortar 1:3, in lines and levels for daoding, including disposing the debrices pointed out any where within the company premises etc. complete.

Providing and laying 8 mm thick or nearest size first class white/ light colured vitrified glazed tiles for walls of size 120x60 cm (approved make) over special adhesive (cerabond, Ramco, khajaria or equivalent make) including pointing the joints with matching colour cement, curing including disposing the debrices at places any where in the company premises as per the direction of Engineer-in-charge etc. complete.

Providing and laying counter top with tiles (240 x 80 x 1.5 cm or nearest size) full body vitrified, of approved colour or shade including cutting and finishing the exposed edges by chamfering and polishing, fixing above the existing counter top after dismantling, removing the existing slab, finishing in neat lines and levels, pointing etc. complete over special adhesive.

Providing and fixing openable shutters with framework for covering existing RCC cupboards with glass shutters. The shutters may be single or multi paneled. The cupboard shall be constructed in the form of aluminium frame work of stiles and rails with panel insert of glass (4mm or nearest, frosted/ plain), including fixing of necessary EDPM washers, soft close Hinges, aluminium handles/ profile handles. fixing in positions with necessary screws, complete as per the direction of engineer in charge.

Providing and fixing openable shutters with powder coated aluminum framework (approved make & shade) for covering existing RCC cupboards with PVC Laminated sheet for shutters. The shutters may be single or multi paneled. The cupboard shall be constructed in the form of aluminium frame work of stiles and rails with panel insert of PVC Laminated sheets, including fixing of necessary EDPM washers, soft close Hinges, aluminium handles/ profile handles. fixing in positions with necessary screws, complete as per the direction of engineer in charge.

Providing outer framework and shutters to cupboard with 16mm or nearest size plywood laminated with 1 mm laminate on the front , 0 .7mm laminate on the back, 2mm edge band including providing necessary frame work around the RCC loft, with autoclose hinges, ss/aluminum handle, multipurpose lock etc. after removing the existing wooden shutter, making the required alteration to the existing wooden framework cupboard for fixing the new shutters etc. complete. (the area of measurement shall be only for the shutter face only.)

Providing and fixing cantilever (wall mounted) wash basin counter cabin with shutter made of 16mm thick wpc board with 1mm thick laminate finish of approved shade/colour, including fixing of 0.1mm thick laminate on back side, providing necessary soft close Hinges, 2mm edge banding, 100mm s.s handles. fixing in positions with necessary screws, factory made by hydraullic pressing machine, edge banding etc. complete as per the dircetion of engineer in charge. ( measurment will be given for elavation area)

Providing counter top with 15- 20mm thick nano white granite of approved colour or shade including cutting and finishing the edges by chamfering and polishing, fixing above counter top with special adhesives etc. complete.

Supplying and fixing 24 x 18 x 10 inches or nearest size stainless steel kitchen sink (handmade, square cut) with waste coupling of standard pattern including dismantling the existing sink, making the required provisions in RCC slab for fixing the new sink in the place, making waste connection etc.including cost of waste pipe and all other materials and labour etc . pointing the edges, complete as per the direction of Engineer-in-Charge.

Supplying and fixing 600x450x200 mm or nearest size stainless steel kitchen sink (Indian make best quality) with 40mm waste coupling of standard pattern including dismantling the existing fire clay sink, fixing the new sink in the place, making waste connection etc.including cost of waste pipe and all other materials and labour etc .complete as per the direction of Engineer-in-Charge.

Supplying and fixing 24 inch or nearest size holding towel rack with towel rod, CP brass, with brackets and fixing to wall with C screws and pvc grips etc.

Supplying and fixing approved quality C.P Towel Ring (Square or open rod) of premium quality with brackets and fixing to the walls including all accessories.

Providing and fixing C.P brass Toilet paper roll holder with all accessories as required and making good the walls where ever required.

Providing and fixing wall mounted half pedestal wash basin of size 460x350x180 or nearest available size with half pedestal height of 465mm or nearest available size with all fittings such as SS waste coupling of suitable size, 15mm brass, angle valve with wall flange, flexible hose connector, making connection to the existing waste line using suitable diameter PVC pipe etc. (Premium quality).

Supplying conveying and fitting 550x400 or nearest size wash hand basin approved quality /brand/ make with a pair of CI brackets painted white, two coats 1no:heavy type 15mm CP Brass pillar tap of approved make , 1no: 15mm PVC connection heavy type with CP learning nuts, 1no: 15mm CP regulating valve of superior make, 1no:CP Brass waste of standard pattern,32mm PVC Waste pipe with CP learning brass nut 1no: etc. including cutting and making good the walls, etc. complete.

Supplying and fixing quarter turn long body cp brass pillar taps/piller cock of approved make including all accessories.

Supplying and fixing quarter turn long body cp brass pillar taps/piller cock of premium quality of Jaguar or approved make matching to the design of counter top wash basin including making required provision on counter top/ fixing to wash basin, including all the accessories etc. complete.

Supplying and fixing wash basins with 500 x 350 x 110 mm or nearest size premium thin rim table top wash basin of approved quality /brand/ make with 1 no. 32 mm CP Brass waste coupling of standard pattern, 32mm PVC Waste pipe including cutting and making good the counter top slab etc. complete.

Supplying and fixing 15mm or nearest size quarter turn CP BRASS LONG BODY taps of premium quality and brand of Jaguar or approved quality and make.

Supplying and fixing 15mm or nearest size CP BRASS BIB taps/CP LONG BODY taps of approved quality and make.

Supplying and fixing 560mm X 860 mm or nearest size wall mounted backlit LED mirror with touch sensor of premium quality superior make glass micro, square/oval/circular/irregular shape with double coat silver plating, including all accessories for lightining, fixing etc. complete.

Supplying 560mm X 860 mm or nearest size beveled edge coppered back mirror of premium quality superior make 5mm thick glass micro, square/oval/circular shape with double coat silver plating, including all accessories.

Supplying and fixing premium quality Overhead rain shower 150X150mm Square Shape Single Flow (Chrome Plated) 15/20mm inlet including cost of all fittings.

Providing and fixing approved quality /brand CP brass shower rose (adjustable type) 100mm dia heavy type with 15mm or 20mm inlet.

Supplying and fixing single lever high flow bath and shower mixer with concealed flow diverter (Exposed part kit + consealed body) of approved make and design including cost of all in and out fitting for hot and cold water, making connections to tap & shower etc. complete.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 25mm OD (3/4 ") (10 Kg /cm2) conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 for internal waterlines including cutting and finishing the walls, as per the direction of engineer in charge.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 32mm OD (1") (10 Kg /cm2) conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 for internal waterlines including cutting and finishing the walls, as per the direction of engineer in charge.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 63mm OD (2") (10 Kg /cm2) conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 for internal waterlines including cutting and finishing the walls, as per the direction of engineer in charge.

Supplying, laying, jointing & hydrostatically testing ISI marked PVC pipes 110 mm OD(10 Kg /cm2) 4" conforming to IS 4985 and all required PVC specials such as tees, bends, elbows, unions, reducers, adapters, coupling etc., as per IS 7834 or IS 10124 for internal waterlines including cutting and finishing the walls, as per the direction of engineer in charge.

Supplying and fixing SS 304 grade floor grating of size 24"x4" or nearest size size of approved quality and design.

Supply &fix PVC floor trap 110mm or nearest dia. of approved quality.including making connection to the drain line using 2" dia pvc pipe etc.

Supplying and fixing stailness steel door stopper, heavy duty, 5 inch with rubber grip including all accessories.

Providing and fixing one piece, floor mounted, European type water closet (western commode) white vitreous china/ ceramic, sleek stright line, fully covered square/ D shaped design, 715x335x715mm or nearest available size, double trap, rimless, syphonic flushing, approved colour, brand/make(approved make), shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, soft close seat cover, all fittings and fixtures, nuts, bolts and gasket etc including making connection with the existing S/P trap, after removing the existing closet, cutting and removing the floors as required levels and line, making the existing soil line good for installing the new water closet, complete in all respect as per directions of Engineer-in-Charge

Supplying and fixing Regular colour European type water closet with P/S trap, Duro Plastic seat of matching colour/pattern and lid with CP brass hinges & rubber buffers 1no: 15mm CP regulating valve,1no: 15mm PVC inlet connection heavy type CP learning nut, 32mm CP Brass flush bend,10 litre capacity low level PVC flushing cistern colour to match with the closet with all fittings, etc. complete including connecting the outlet to the existing sewer pipe with required specials and making good the walls, floors, etc.

Supplying and fixing mortice door lock of superior quality, including removing the existing lock aldrop/mortice lock), making the door capable for receiving the new lock, finishing for the smooth functioning including cost of all labour, screws etc. complete.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door with Frames of cross-section 85 mm x 45 mm or nearest available size of having single rebate to receive shutter of 28 mm thickness. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish design made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings monolithically,inlcuding all accesories like mortice handle, hinges, towerbolts, removing the existing door & frame and finishing the walls, complete as per direction of Engineer-in-charge.

Plastering with cement mortar 1:4, for an average thickness of 12 mm, one coat, floated hard and trowelled smooth at all levels

Supplying and fixing cp brass health faucet of approved shade/ Brand with angle cock of premium quality with cp braided flexible pipe 1m long, wall hooked ,making conncetion to water line,etc. complete.

Supply &fixing quarter turn CP brass angle cock 15mm of superior quality.

Supply and fixing 1 inch PVC ball valve of approved make, including making connection to the PVC line etc. complete at all heights.

Supply and fix different sizes and types of hard wood (Anjili or equivalent approved quality) panelled door without outer frames, shutter frame 100×35 for verticals and horizontals, 16mm thick panels with necessary intermediate frames including a coat of wood primer, neccesary hinges, tower bolt, and labour charges for fixing all fittings etc. complete.

Providing and fixing in position approved quality anjili/jack wood frame work of required size for doors ,windows,ventilators,air conditioners etc.panneled, framed, moulded etc. including dismatling the existing frame carefully without damaging the, other frame/ wood work, making the new wood to matching with the existing frameworksize shape and profile etc. cost of all labour, machineries, hard wares, etc.complete as per the direction of engineer in charge.

Providing and fixing stainless steel aldrops of 16 mm diameter bars, 250 mm long including cost of necsessary screws ,fittings,labour complete.

Replacing the damaged window shutter glasses with 4mm thick plain glasses including removing the damaged glasses without disturbing the window shutter and frame including cost of teak wood reapers for replacement if required, nails, putty, labour for replacing scaffolding etc complete.

Servicing of wooden windows by oiling the hinges and tower bolts including planing the edges of shutters and neccesary carpentry works for the hooks, stays etc, if required so as to close the shutters properly. (Unit rate shall be for servicing per number of shutters as per the direction of engineer in charge.)

Removing the existing wooden door shutter,including cutting the bottom member to get the required height and refixing door shutters to existing door frames, replacement of hinges with new SS hinges, screws, etc. complete as per the direction of Engineer-in-charge.

Supplying and fixing 4" S S hinges for doors, windows etc. including removing the existing, screws, labour etc. complete.

Supplying and fixing door closer godrej/dyna or equivalent make, including all screws, labour etc complete.

Dismantling and removing carefully the existing brick masonry in cement mortar at all levels.

Dismantling and removing RCC works including cutting the reinfocements and disposing the debrices

Dismantling and removing PCC works including disposal of debrices.

Plastering with cement mortar 1:4, for an average thickness of 15 mm , one coat, floated hard and trowelled smooth at all levels to rough faces of brick masonry, rubble masonry etc.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing frame/ bolts with in the position in template, plastering the inside outside area, in neat lines and levels etc. complete as per direction of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) (3/4") SDR 11 - 20 mm (nominal size) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded/ plain fittings and specials such as elbow, coupling, union etc., including consealing the pipe for internal water lines. This includes cutting of walls in lines, finishing the walls using CM, jointing of pipes & fittings with one step CPVC solvent cement and hydrostatically testing of joints complete at all heights, as per direction of Engineer in Charge.

Supplying and laying 20 mm dia. PVC pipes (10kg/cm2 pressure pipes.) of approved quality including cost of all fittings for internal water lines including cutting the walls etc. complete.

Providing water proofing to floors and walls up to required height shall be cleaned and grinding to make it free from all dirt ,dust,debris ,and other components by mechanical grinding and wire brushing .Applying priming coat of acrylic polymer modified water proofing membrane Poly bond &Magno fix with cement and water will be applied as primer coating on the prepared surface and the surface will be allowed to dry. Applying main coating and final coating using Flexcoat 2k is an Acrylic cementitious polmer modified elastomeric , Waterproofing& protective coating in the prepared surface by brush. complete as per the direction of engineer in charge.

Providing and fixing 100x10 mm stainless steel tower bolts with necessary SS screws etc. complete.

Providing, fabrication and fixing in position of false ceiling at a required height (the height will be decided on the spot as per site conditions) by fixing 12 mm Thk. Gypsum Board sheets on frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 2’0”x2’0” c/c. The Gypsum Board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a leveled smooth ceiling. Recessing of the Gypsum Board for light fixtures including cutting for LED profile lightning/ light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with the design as required and directed by the engineer in charge.

Providing and fixing false ceiling at all heights with 6mm integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 600 x 600 mm or nearest size of approved texture, design and patterns over inter locking aluminium ceiling grids with 25x25x1.5mm anodized aluminium angles or equivalent sections fixed alround walls at the required height for false ceiling using rawal plugs, screws etc. 36x25x1.5mm anodized aluminium main tees or equivalent sections 600 mm intervals suspended from the roof truss work at required length and adjustable 6mm suspension rod, holding nuts, washers etc. 25x25x1.5mm Tees interlocked to this main Tees at bottom part including providing necessary frame work for tube light fittings etc. complete as per the direction including painting with two coats of plastic emulsion paint including 1 coat of cement primer to all faces of the tiles. No deductions shall be made for light points.

Dismantling and removing hand rail in the front sitout of D type quarter includingremoving the concrete post hand rail and MS grill inserted to walls.

Fabricating errection of modular cabinets/ wardobe for bedrooms, living rooms, kitchen etc. made of 16mm or nearest thick 710 grade Marine plywood panels and back panel with 8 mm thick PVC board of approved make as per the drawing. The shutters are made of 16mm thick 710 grade Marine plywood. The exposed portions are finished with machine pressed 1mm thick laminate and inside portions with 0.7mm thick laminate of approved make & shade. The cabinets shall be wall/ floor mount having the depth and partition as per the design. The edges are finished with machine pressed edge banding of required thickness (2 mm thick for shutters & .8 mm thick for cabinet). The rates shall be inclusive of all accessories like Auto closing hinges, Multipurpose lock and Aluminum/SS handles /knob of approved make. Area of measurement shall be for the elevation area only. (Accesories shall be of Ebco/Hettich).

Providing wall cladding tiles of wooden plank/ stone textures with projection over sphecial adhesive, filling the pointing the joints, finishing neat to lines and level. The tile colour, design & pattern of laying shall be as directed by the engineer in charge.

Providing water proofing work on toilet floors,walls etc. after increasing the gap in joints by cutting tile joints using mechanical means, filling the groves with three component of epoxy material (weber/equal) in the floor and wall up to height of 30 cm .Without damaging the adjecent tiles and other fittings, including cleaning the floor, wall etc ,after completion of the work etc. Complete as per the direction of engineer in charge , scope of work.

Jose varghese (BID ID -3156337)

SANUSH TH (BID ID -3160426)