Loading
Loading…
Loading…
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
3 Sept 2026, 6:00 pm6d left
GE (I) CG PORBANDAR
COAST GUARD, DHQ NO.1, OPP. BIRLA FACTORY, PORBANDAR
COMPREHENSIVE REPAIR TO B/R WORK AT ICGS VADINAR UNDER GE I CG PORBANDAR
2026_MES_783815_1
8223A/E8
Open Tender
Civil Works
Item Rate
300 days
VADINAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (I) CG PORBANDAR
₹30,000
Yes
12 Aug 2026
12 Aug 2026
5 Sept 2026
12 Aug 2026
3 Sept 2026
27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | Schedule 'A' | - | - | - | - |
| 1 | Supply & Fixing in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples including old or new beading, complete all as specified and directed by Engineer-in-Charge. | 30 | Sqm | - | - |
| 2 | Hacking out old broken glass (any thickness size quality or description) from wooden, steel or aluminium frames glazed with putty or fixed with wooden beads, complete all as specified and directed by Engineer-in-Charge. | 2 | Sqm | - | - |
| 3 | Supply & Fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge. | 2 | Sqm | - | - |
| 4 | Supply & Fixing in repair 20mm dia aluminium curtain rod with brackets etc., complete all as specified and directed by Engineer-in-Charge. | 80 | RM | - | - |
| 5 | Supply & Fixing in repair 150mm aluminium handles, cast type anodised fixed, complete all as specified and directed by Engineer-in-Charge. | 5 | Each | - | - |
| 6 | Supply & Fixing in repair 200mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-Charge. | 5 | Each | - | - |
| 7 | Supply & Fixing in repair 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy but fixed, complete all as specified and directed by Engineer-in-Charge. | 10 | Each | - | - |
| 8 | Supply & Fixing in repair rubber beading 50mm wide and 5mm thick as approved, complete all as specified and directed by Engineer-in-Charge. | 30 | RM | - | - |
| 9 | Taking down shutters of any description exceeding 1.0 Sqm each, complete all as specified and directed by Engineer-in-Charge. | 12 | Per leaf | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_878228.xls
BOQ • 1.96 MB
8223AT.pdf
Tender Documents • 4.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].