BID DOCUMENTS FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS (GVP) AT VARIOUS AREA OF DEVGADH BARIA NAGARPALIKA.THIRD ATTEMPT

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Devgadh baria Nagarpalika

SECTION-7 BILL OF QUANTITIES-140

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT BANK OF BARODA NI SAME , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 4.10 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 2.10 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 27.00 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 21.00 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-141

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 5.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-142

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-143

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-144

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-145

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT SBI NI SAME , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 2.60 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 1.30 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 17.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 17.50 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 3.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-146

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 7.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-147

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-148

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-149

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-150

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT BANK OF PADAR CHOKDI , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 2.70 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 1.40 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 18.00 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 20.00 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 3.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-151

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 7.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-152

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-153

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-154

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-155

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT CIVIL HOSPITAL NI BAHAR , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 1.70 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 0.90 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 11.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 14.50 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-156

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 5.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-157

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-158

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-159

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Providing Artistic 3D wall Painting on Serveral location up

to 10 Feet Height at Devgadhbaria nagarpalika

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-160

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT MOTA BAGICHA PACHAD, AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 2.60 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 1.30 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 17.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 17.50 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-161

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 4.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-162

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-163

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-164

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

[4-5-2]Add.1% Labour Cess.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

29 1.00 CCTV Camera. Trueview 4G Dual Lens Mini PT

Nos. Camera With 128GB Memory Card CCTV Surveilliance

System with all accessories and fixtures at 1 Surveillance

Points as directed by EIC.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-165

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT PAATRESHWAR MANDIR ROAD , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 3.80 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 1.90 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 25.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 23.00 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-166

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 5.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-167

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-168

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-169

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-170

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) AT NANA TALAV NI SAME , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 4.00 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 2.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 26.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 21.00 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-171

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 5.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-172

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-173

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-174

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-175

DEVGADHBARIA MUNICIPALITY, DEVGADHBARIA

NAME OF WORK :- ESTIMATE FOR DEVLOPMENT WORK OF GARBAGE VULNERABLE POINTS

(GVP) ATPANI NI TANKI SAME , AT DEVGADH BARIA.

Sr. Quantity Discription Total Unit Amount

1 1.70 Box Cutting the Road Surface to proper slope and

Cmt. camber for making a base for road work including

removing the excavated stuff and dipositing to road slope

as directed all lead and lift etc. complete upto 50 mt.

2 0.90 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt 4 Coarse sand, 8 Crushed stone agreegate 40 mm

nominal) and curing complete excluding cost of

formwork in foundation and plinth. (more than 10 ton)

3 11.50 Providing and fixing pre-cast Rubber Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / Vibrated mechanically as per

approved design confirming to IS 15658 : 2006 including

35mm sand layer for levelling and filling the joint with

sand in proper line and level etc complete as per

guidelines of IRC : SP 63 -

4 14.50 Providing and fixing pre-cast concrete kerb stone of gray

Rmt cement based concrete block 30cm length,30cm height

and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line

and level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

5 2.00 Pre-cast Concrete Reinforced Bench . As Per Directed

Nos. Engi. In Charge Icluding Labour, Transpotation & All

Taxes. Etc complete.

SBD SECTION-7 BILL OF QAUNTITIES-176

6 1.00 Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

Nos. Pole capacity 100 ltr

7 5.00 Planting shrubs in cement pots involves selecting a

Nos. suitable pot, preparing the soil, and planting the shrub

with proper care.

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size.

8.00 (E) 3 Core 2.5 sq. mm 136.35 Mtr.

9 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and bolts if

5.00 For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 10.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI

Mtr. armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(e) 4 core

25 Sq. mm 188.87 Mtr.

12 1.00 Providing and erecting Miniature circuit breaker single

Ea. pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark.

Cat III 112.11 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-177

13 3.00 Providing and erecting Annealed bare Copper wire 8 to

14 1.00 Providing and erecting Pipe type earthing having

Ea. cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

15 1.00 For using salt and charcoal/coke as required for pipe type 171.70 Ea.

16 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand /Solid Aluminium conductor

for 1.1 KV. To be laid on wall with necessary clamps or in

existing trench/pipe of following size of cables

10.00 (C) 4 core 10 Sq. mm 138.37 Mtr.

17 Providing and erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables

2.50 (C) 4 core 16 Sq. mm 151.50 Mtr.

18 10.00 Providing & laying approved make Double walled

Mtr. corrugated pipes (DWC) of polyethylene (conforming to

IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for

laying of cable. below ground / road surface for enclosing

cable. (C) 50 mm Dia

19 Supplying following size of Light duty “A” Class G.I. Pipe

& erecting as directed by Engineer-in-charge.

2.50 (B) 50 mm dia 300.98 Mtr.

20 Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 10 Sq. mm 38.38 Ea.

SBD SECTION-7 BILL OF QAUNTITIES-178

21 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

2.00 (d) 2 to 4 core 25 Sq. mm 51.51 Ea.

22 1.00 Supplying and erecting approved make Octagonal pole

Ea. made from HR sheet steel. The pole should be made as

per IS. and shall be coated with hot dip galvanizing as per

IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With

Suitable foundation (Included) as per details given by

manufacturer considering site requirement. (D) 6 Mtr.

Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx

Pole weight 59 kgs.

23 Providing and erecting Street Light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm

/80mm / required size of pole top having sufficient

fasteners for fixing the brackets and having spread of

1.5.mtr. length with 110 deg.with vertical plane & suitable

welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following

1.00 (A) Single Arm Bracket 1.5 Mtr. 626.20 Ea.

0.00 (B) Double arm Bracket 1.5 Mtr. 916.07 Ea.

24 1.00 Supplying and erecting LED street light / Flood light

Ea. fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt. LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts. Cat III

SBD SECTION-7 BILL OF QAUNTITIES-179

25 1.00 Supplying & erecting power contactor, AC3 duty for time

Ea. switch complete erected as per direction Cat III. (B)

pole 250V 32 Amp. 1883.65 Ea

26 1.00 Supplying & erecting approved make SMC press

Ea. moulded composite FRP. loop-in, loop- out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E), DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements

with mounting clamp with nuts, bolts & washers suitable

for erection on pole with cable clamps& earth bolt of

following size of box. (c) 150mm x 125mm x 100mm

[deep]. 476.72 Ea.

27 10.00 Making trench in Hard Murrum / Tar Road of suitable

Mtr. width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

28 10.00 If additional machinery like hammer driller or JCB use

Mtr. [Add] 297.95 Mtr.

Providing Artistic 3D wall Painting on Serveral location up

29 11.15 to 10 Feet Height at Devgadhbaria nagarpalika 1484.70 sqm

Add :- 18% of GST, Rs.

Add :- 2% of Contingency Charges, Rs.

Add :- 1% of Qaulity Controll, Rs.

SBD SECTION-7 BILL OF QAUNTITIES-180