Maintenance Repairs to Steel Furniture at Naval Station, Bheemunipatnam

Amount

Material & labour for Removing existing paint of any description both inside & outside by paint removing agent / scrapper or by caustic soda or by any other means without damaging surfaces, filling holes, welded joints with putty and finally rubbing with sand paper / abrasive cloth thoroughly for smooth and clean surface free from dust and applying two coats of synthetic enamel paint of smoke grey colour by Spray Machine complete all as shown on drawings and as directed.

Almirah Large Steel with Shelves [FD – 67 / FD – 339 / FD – 1031]

Almirah Small Steel with Shelves [FD – 67 / FD – 340 / FD – 1032]

Almirah Steel Large [FD / E6 / MAP / 18]

Almirah Steel Medium [Wire Gauge Front] [FD – 115]

Almirah Steel Medium [Cabinet] [FD – 115]

Almirah Steel Large with Selves 1855X910X480mm [TP]

Almirah Steel Medium with Selves 1155X760X430mm [TP]

Almirah Map Steel [FD – 83 / FD – 1030]

Book Case Steel [FD – 1028]

Cabinet Filling Steel [4 Drawers] [FD – 397]

Chair CB Office with Arms [FD – 75]

Chair CB Office without Arms [FD 75]

Chair Verandah [FD / E6 / MAP / 11]

Chair Writing [FD / E6 / MAP / 12]

Locker Steel Built-in [FD – 1029]

Locker Steel [CWE [P] / V / SK / 18 & CWE [P] / V / SK / 35]

Locker Steel [4 Nos] [FD / SK / 944]

Form with Back [FD – 78]

Form without Back [FD – 77]

Rack Steel for Closed Records 915X760X1905mm [TP]

Stool Steel [FD – 81 / FD – 409]

Rack Steel Adjustable Six Tiers [FD – 106]

Rack Pigeon Hole Steel [FD – 106]

Side Rack with Trays [Steel] [FD – 97]

Rack Steel Adjustable Three Tiers [FD – 106]

Rack Shoe Steel [ FD / E6 / MAP / 02 [R]]

Steel Shelving Cabinet large [Adjustable Type] [TP]

Steel Shelving Cabinet Small [Adjustable Type] [TP]

Table Office Officers Steel [FD – 84 / FD – 306]

Table Office Clerk / General Steel [FD – 84 / FD – 307]

Table Typist Steel [FD – 84]

Table with Drawer Steel [FD – 1008]

Table Steel [FD – 1009]

Table Officers Steel [FD – 1003]

Table Clerk Steel [FD – 1004]

Chair Verandah [FD / MAP-II / 06]

Chair Revolving / Tilting with Arms [FD – 75]

Locker [6 Units] Steel [FD – 127]

Book Shelf Open Large Steel [FD – 69]

Chair Visitors [Model No. PCH – 7112R of Godrej] [TP]

Table Steel with Marble Top [FD – 136]

Chair Visitor 2-Seater with Arms [TP]

Vertical Storage Unit 1290 X 470 X 620mm 4 Drawer [TP]

Slotted Angle Rack 4 Tier [TP]

Storage Cabinet [Model No. Nova Pedestal of Godrej] [TP]

Storwell Big [Make: Godrej] [TP]

Work Station 1500 X 1500 X 1241mm [Make: Godrej Spacio] [TP]

Screen Moveable [Steel] [FD – 83]

Storage Cabinet [Model No. VSDU – 12 of Make Godrej] [TP]

ALMIRAH LARGE STEEL [FD – 67 / FD – 339 / FD – 1031]

Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality

Handles

Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

ALMIRAH MEDIUM / SMALL STEEL [FD – 67 / FD – 340 / FD – 1032]

Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality

Handles

Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

LOCKER STEEL BUILT-IN [FD – 1029]

Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

CABINET FILLING STEEL [4 DRAWERS] [FD – 397]

Removing the unserviceable / broken Drawers and supplying and fixing New Drawers made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the unserviceable / broken Channels and supplying and fixing New Channels including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

CHAIR CB OFFICE WITH OR WITHOUT ARMS [FD –75]

M & L for Removing Dents / Bends by Cutting and Welding of broken Chair CB Office with Arms and bringing to its original shape, painting to Chair Tubular Steel with Arms including fixing 4 Nos of new PVC Bushes to the bottom of the chair frame and 2 Nos of PVC Caps on the top of the frame complete all as specified and as shown on drawing.

All as per Serial Item No. 6.01 above but for Chair CB Office without Arms

Removing unserviceable Seat Frame of Chair CB Office with Arms and S & F new Seat Frame made out of teak wood, black polished and duly plastic canned in "Godrej" pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane fixed with 4 Nos screws and nuts to the chair frame complete all as specified and as shown on drawing.

All as per Serial Item No. 6.03 above but Back Frame of Chair CB Office with Arms

Removing broken Hand Rest and S & F new Hand Rest made of teak wood, black polished and fixed to the Chair CB Office with Arms with screws of suitable size to the chair frame complete all as specified and as shown on drawing.

All as per Serial Item No. 6.03 above but Seat Frame of Chair CB Office without Arms

All as per Serial Item No. 6.03 above but Back Frame for Chair CB Office without Arms

Removing of existing torn out / unserviceable plastic cane from Back of Chair CB Office with Arms and recanning with plastic cane in "Godrej" pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane complete all as specified and as shown on drawing.

All as per Serial Item No. 6.08 above but Seat Frame of Chair CB Office with Arms

CHAIR VERANDAH [FD – 256 / FD – 359]

Removing of existing torn out / unserviceable plastic cane from Chair Verandah, preparation of steel tubular frame surfaces with emery paper for painting and applying two coats of synthetic enamel paint over one coat of red oxide primer and recanning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour Complete all as specified and shown on drawing.

CHAIR VERANDAH [FD / MAP-II / 06]

Removing the existing worn-out Plastic Seat and Back from Chair Verandah and S & F new Plastic Seat & Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

CAFETERIA CHAIR [TP]

Removing the existing worn-out Plastic Seat and Back from Cafeteria Chair and S & F new Plastic Seat & Back of approved quality and size including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

TEAPOY VERANDAH [FD / E6 / MAP / 17]

M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing unserviceable Top from Teapoy Verandah and S & F New Top complete all as shown on drawing and as directed.

TABLE OFFICE CLERK / GENERAL STEEL [FD – 84]

Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the unserviceable / broken Drawer S & F New Drawer made of 1mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

TABLE OFFICE OFFICER STEEL [FD – 84]

Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

TABLE TYPIST STEEL [FD – 84]

Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

OFFICE TABLE [Godrej WT 712 with ERV] [TP]

M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

EXECUTIVE TABLE DESK [1800 X 900 X 750mm] [Godrej Maestro] [TP]

M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Table Computer [FD / E6 / MAP / 03]: M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Table Steel Laminated Top of Size 1400 X 760 X 800mm with Three Side Drawers on Either Side [TP]: M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

TABLE BED SIDE [FD / E6 / MAP / 15 [R]]

Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

Right Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

Left Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board.

Front Door and fixing the knobs from Table Bed side and replacing the same items confirming to same quality and size complete.

Back Made of 6mm thick Plywood, BWR Grade, Type "AA", conforming to IS – 303 and ISI marked provided in one piece in top with 6mm thick Teak Wood Beading / Edging duly French polished.

STEEL SHELVING CABINET ADJUSTABLE TYPE [TP]

Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Large Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Small Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

RACK STEEL ADJUSTABLE SIX / THREE TIER [FD – 106 / FD – 1038 / FD – 1039]

Removing the existing unserviceable / rusted Shelves of Rack Steel Adjustable Six Tier and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

All as per Serial Item No. 20.01 but Rack Steel Adjustable Three Tier complete all as specified and as directed.

All as per Serial Item No. 20.01 but Rack Steel Adjustable Closed Type of Size 1875 X 900 X 500 mm [TP] complete all as specified and as directed.

CHARPOY IP HARD TOP [FD / MAP-II / 01]

Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm with suitable teak wood beading all around the plywood and duly French polished including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.

CHARPOY GI PIPE WITH PLYWOOD TOP [FD – 220]

Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm with suitable teak wood beading all around the plywood and duly French polished including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed.

Removing the old unserviceable Nylon newar from GI Charpoy, cleaning the surfaces thoroughly, Supplying and closely weaving both sides with new Nylon Newar First Quality of Light Shade of size 50/55 mm wide of approved quality consisting minimum 33 Bands and 13 Rows, not less than 1.50 KGs per Charpoy including minor repairs complete all as shown on drawings and as directed. Make: Konark / Mayur / Kohinoor [Recycled Nylon Newar shall not be used]

CHAIR EXECUTIVE TYPE REVOLVING [HFD – 2047]

M & L for carrying out repairs including replacement of Wheels and Cushion with Cover including replacement of necessary steel sections and spares of Main Frame to bring it to original shape and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

CHAIR VERANDAH [FD / E6 / MAP / 11]

Removing the existing worn-out Steel Plates of Seat and Back from Chair Verandah and S & F new Steel Plates of Seat and Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

RACK SHOE STEEL [FD / E6 / MAP / 02 [R]]: M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed.

Rack Steel Parachute [U2, HSN / SAC: 998719] of Size 97 ¼" X 48" X 24": M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and as directed.

Rack Steel Parachute [HSN / SAC: 998719] of Size 94" X 36" X 24": M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and as directed.

M/s.DSRK CONSTRUCTIONS

M/s.Kissenlal Daga

SOHAN ENGINEERING ASSOCIATES