Kakrapar Project

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are

given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far

as it is otherwise provided under the Contract, include all constructional plant,

layout, supervision, materials, erection, maintenance, insurance, profit, taxes and

duties, together with all general risks, liabilities and obligations set out or implied

in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items are

provided the cost shall be deemed to be distributed among the rates and prices

entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates or

prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Road and Bridge works. For building works specifications for

building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of compressed

air drilling for its removal, and which cannot be extracted by ripping with a tractor

of at least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

Name of Work : Protection Work for Bank Of Nizar Minor Canal In the Juridiction Of Mahuva

Percentage Rate Tender (Up to INR 50 Cr. )

QTY. ITEM In In Words UNIT AMOUNT

Excavation for foundation in all sorts of soil

including yellow, sandy and gravelly soil, soft

1 63.00 murrum etc. dry condition including depositing the 81.50 CM

excavated stuff in uniform layers in banks or as

directed etc. complete for lead up to 1.0 km and all

lifts (By machinery) (a) Above water table

Item No.-6 Rupees

Providing & Placing in position reinforcement bars Seven

including cutting, bending, welding joints where Thousand

2 106.79 necessary, hooking etc. complete as per drawing for 7194.00 One Qtl

all lead and lifts. (B) TMT Hundred

Providing and laying Plain/Reinforced cement

concrete of cement, sand and metal (above 12 mm &

up to 20 mm size) in following proportion laid in situ

including centering, shuttering, temping, smooth

4891.30 Hundred CM

finishing, curing etc. complete as directed for all

leads and lifts(Manually with Conventional Mixer)

Earth work in embankment using soil, soft & hard

murrum excavated from approved borrow area /

village tanks etc. including breaking clods, dressing

124.50 Twenty Four CM

to the design section with lead up to 3 km and all

lifts. (By JCB-4CX machinary)

Compaction of selecte soil/hard murrum /soft Rupees Ten

murrum in even thickness of 15 to 20 cms including

5 630.00 10.40 and Forty CM

watering rolling of suitable capacity etc. complete as Paisa Only

Rupees Seventeen Lac Eighty Two Thousand Eight Hundred Twenty Four and Forty Six Paisa Only

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Note:-GST as per prevailing rate shall be paid Extra.

(A) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with brief details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour Cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R.

therefore, in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate i.e. Rs 5234/MT mentioned in all the tender.

Signature of Contractor

Executive Engineer

Surat Canal Division

Checked By Division P.B.