Drinking Water & Sanitation

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290X200X140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, excluding seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

RCC M25 Grade (Cement:fine aggregate:coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc, to site, including all operational, incidential and labour charges such as machine mixing, laying concrete, curing etc., including hire chages and labour charges for centering and scaffolding with steel centering plates,foot plates complete but excluding cost of steel and its fabrication charges complete for finished item of work for Lintels

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work

Plastering with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site,excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Plastering to even surfaces of wall with CM (1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)

Supply and fixing of Door size 1.50X2.10Mts Double Leaf with Door Frame of Medium Teak Wood Section 100mm x 75mm of 1No. horizontal, 2Nos., verticles and flush door and shutters solid bond wood block board type with commercial ply on both faces 35mm thick , Hardware fixtures ie., MSPC Butt Hinges 150mm Long 6Nos, MSPC Handles 150mm Long 2Nos, MSPC Tower Bolts 300mm long 1No., MSPC Aldrop 300mm long 2Nos, MS Hold Fast 6Nos,including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of Door size 1.20X2.10Mts Double Leaf with Door Frame of Medium Teak wood Section 100MMX75MM and shutter of 35mm thick of solid bond wood block board type with commercial play on both faces, Hardware fixtures ie.,MSPC Butt Hinges 150mm Long 6Nos, MSPC Handles 150 mm Long 2Nos MSPC Tower Bolt 300mm long 1Nos,MSPC Aldrop 300MM long 2Nos, MS Hold Fast 6Nos Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of Door size 1.06X2.10Mts Double Leaf with Door Frame of Medium Teak wood Section 100MMX75MM and shutter of 35mm thick of solid bond wood block board type with commercial play on both faces, Hardware fixtures ie.,MSPC Butt Hinges 150mm Long 6Nos, MSPC Handles 150 mm Long 2Nos MSPC Tower Bolt 300mm long 1Nos,MSPC Aldrop 300MM long 2Nos, MS Hold Fast 6Nos Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work.

Supply and fixing of G.I Pipe Three leaf Window size of 1.83x1.37 Mts using outer frame Horizontal, Vertical and Center Supports of 50x50x2.6mm Square pipe and fixing G.I sheet 0.75mm thick and providing Stainless steel Mesh including fabrication and fixing cost and conveyance of all materials and labour chargers etc., complete of size 1.83x1.37 Mts

Supply and fixing of G.I Pipe Two leaf Window size of 1.20x1.37 Mts using outer frame Horizontal, Vertical and Center Supports of 50x50x2.6mm Square pipe and fixing G.I sheet 0.75mm thick and providing Stainless steel Mesh including fabrication and fixing cost and conveyance of all materials and labour chargers etc., complete of size 1.20x1.37 Mts

Flooring with CC(1:2:4) using 20MM HBG Chips to 40mm thick and top finished with CM (1:3) 8MM thick including cost and conveyance of all materials and labour charges etc., complete.

White washing two coats with White Cement or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to New Wood work with two coats of ready mixed synthetic enamel paint first quality all shades over wood primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer Grade-1 making three (3) coats in all to given adneven shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes,incidental, operational and all labour charges etc., complete for finished item of work.

Supplying, fitting and placing HYSD (Fe 415/tmt grade as per IS 1786-1985) bar reinforcement VRCC works complete including wastage, as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100,1600 MORTH for Bars 36mm dia and above, where welding required to be done compulsorily including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, opeational, labour cahrges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work.(APSS.No.126)

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 28.60mm OD Pipe - SDR 13.5 (BMW-I.222)

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 22.20mm OD Pipe - SDR 13.5 (BMW-I.221)

Supply and fixing 12.70mm N.P.bib tap Indian make 300 grams Sl.No. 182 - BMW-E-09

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Value as per IS -778 1-class heavy duty - 20mm NB size (Item No 256 ,Page No 114)

Supply and laying jointing and testing of 110mm dia 3Mts Socket PVC/SWR Pipe 4Kgs/sq.cm Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand including cost and conveyance of all labour charges etc., complete for finished item of work.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks