Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical, Instrumentation and Civil works for Water Distribution Station At Bodakdev ADB and Bodakdev Trilok of North West Zone of AMC.

estimated cost, as mentioned above. Amount of my / our tender works out for Rs. ________________ (in figures)

Estimated amount put to tender Rs. Estimated amount put to tender Rs.

2) Lump Sump Amount Quoted for Buy Back Items (as per Annexure-I) in Scope of Work (Section A-4, A.4.2), Rs. _____________

Signature of Contractor

Company’s seal :

1. Bidder has to quote % Above (Premium) or % Below (Discount) or As part of total Job, Rs. 4,79,22,232/- (i.e.

Total Estimated Project Cost w/o buyback value) and has to carry out work at Ordered Value with any Excess -

Less Qty. mentioned in above items as per site requirement and instruction of Engineer-in-charge.

2. Bidder shall quote for buyback items as per Annexure-1 in Scope of Work, Section A-4(A.4.2) separately

online at Sr. 2 as indicated above. Bidder to note that net amount quoted by the bidder shall be determined by

deducting the total amount of buyback quoted by bidder from the amount quoted for works as above at Sr. No.

deducting the total amount of buyback quoted by bidder from the amount quoted for works as above at Sr. No.

1 and the net amount so derived shall be considered for Price Evaluation purpose to determine lowest bid.

TOTAL SUMMARY OF COST

Name Augmentation work with SITC of Pumping Machinery with related Mechanical,

Of Electrical, Instrumentation and Civil works for Water Distribution Station At

Work Bodakdev ADB and Bodakdev Trilok of North West Zone of AMC.

ITEM DESCRIPTION AMOUNT

A BODAKDEV ADB WDS CAPITAL COST

B BODAKDEV TRILOK WDS CAPITAL COST

C TOTAL OF CAPITAL COST (A + B) (EXCLUDING GST)

BUY BACK AMOUNT IN RS. (BODAKDEV ADB WDS)

(AS PER ANNEXURE-I)

BUY BACK AMOUNT IN RS. (BODAKDEV TRILOK WDS)

(AS PER ANNEXURE-I)

F TOTAL BUY BACK AMOUNT IN RS. (D+E)

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK

TOTAL AMOUNT AFTER DEDUCTION OF BUY BACK

VALUE IN RS. (C-F)

SUMMARY OF COST

Name of Augmentation work with SITC of Pumping Machinery with related Mechanical,

Work Electrical, Instrumentation and Civil works for Water Distribution Station At Bodakdev

ADB of North West Zone of AMC.

SR. NO. ITEM AMOUNT

A. MECHANICAL WORK

B. INSTRUMENTATION WORK

C. ELECTRICAL WORK

E. TOOLS & TEST EQUIPMENTS

TOTAL AMOUNT OF CAPITAL COST (A + B + C + D + E)

TOTAL AMOUNT OF CAPITAL COST (A + B + C + D + E)

F. (EXCLUDING GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev ADB of North

Work West Zone of AMC.

MECHANICAL WORK

ITEM QTY UNIT RATE (in

1.1.1 HORIZONTAL SPLIT CASING 4 Nos. 6,27,950.00

CENTRIFUGAL PUMP WITH MOTOR

Supply, installation, testing and commissioning of

horizontal mounted, side suction & side delivery

type Horizontal Split Casing Centrifugal Pump

having CI Casing, CF 8 M impeller & wear rings,

SS410 Shaft & shaft sleeves, Mechanical seal and

suitable to couple with TEFC squirrel cage IE3

efficiency class Induction Motor, 3 Phase, 415 V,

50 Hz., AC supply, max. 1500 RPM synchronous

speed. The scope shall also include all required

accessories viz. CI drain rim type base plate, Flex.

coupling, coupling guard, foundation bolts, min

mm dia. G.I. Class-B drain pipe upto drain channel,

etc. as per specification.

Capacity : 500 m³/hr

Motor Rating : 75 KW or as per Manfactuer

The scope also includes chipping, grouting, altering

the civil foundation to suit the new pumpset as

required and removal of debries and cleaning the

INDUCTION MOTOR FOR ABOVE HSCF

Supply Installation Testing and Commissioning

(SITC) of approved make, energy efficient,

Efficiency Class-IE3, horizontal foot mounting,

solid shaft, squirrel case, Induction Motor rating

mini 75 kW or higher as per IS, 3-Phase, 415V,

50Hz., AC supply, maxi.1500 RPM synchronous

speed and having TEFC enclosure with Class F

insulation (temp. rise limited to Class B) with

2.1.1 VALVES 1 Nos. 3,057.00

Supply, Installation, testing and commissioning

of Manually gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve conforming to

IS 14846 PN 1.0 with SS 304 seat rings and SS

spindle with hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data

Size : 50 mm NB (Manually Operated - On delivery

pipe of Dewatering Pump )

2.1.2 VALVES 1 Nos. 38,465.00

Supply, Installation, testing and commissioning

of Manually gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve conforming to

IS 14846 PN 1.0 with SS 304 seat rings and SS

spindle with hot dipped galvanised hardware's,

bolts, nuts & washers, gaskets, etc. as per data

Size : 350 mm NB (Manually Operated - On

Suction pipe of HSCF Pump )

2.2.1 Supply, installation, testing and commissioning of 4 Nos. 1,51,212.00

Electrically gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve with actuator,

integral starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all hot

dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.Size:

300mm NB (Electrically Operated - On Delivery

2.2.2 Supply, installation, testing and commissioning of 5 Nos. 1,63,465.00

Electrically gear operated CI/DI Double Flanged,

Rising Spindle type, Sluice Valve with actuator,

integral starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all hot

dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size: 350mm NB (Electrically Operated -

Installation location as directed by Enng. in charge

2.2.3 Size: 400 mm NB (Electrically Operated - 5 Nos. 1,79,819.00

Installation location as directed by Enng. in charge

2.2.4 Size: 450 mm NB (Electrically Operated - 5 Nos. 1,92,251.00

Installation location as directed by Enng. in charge

2.3.1 Supply, installation, testing and commissioning of 4 Nos. 37,587.00

double flanged CI/DI Dual Plate Check Valve

conforming to API 594 Class 300 / PN 1.6 with CS

dual door, hinge pin & stop pin of SS 410 , springs

of AISI 304 and seat rings of SS 304 ( renewable ),

along with all required accessories, gaskets and

hardwares,etc. and as per specification.

Size : 300 mm NB (On Delivery Pipe)

3.1.1 Supply,Installation,Testin and Commissioning of 4 Nos. 12,840.00

double flanged Expansion Bellows confirming to

EJMA/IS standard with PN 1.0 rating & all

necessary St.St. hardware's.Size : 350 mm NBx

mm ( L )(On Suction Pipe)

3.1.2 Size : 300 mm NBx 300 mm ( L )(On Delivery Pipe 4 Nos. 10,200.00

4.1.1 SITC of CI flanged reducer/expander 4 Nos. 5,568.00

conforming to IS 1538 with gaskets, hardware and

required accessories as per specifications.

Size: 350 mm X 250 mm X 600 mm (L)

Note:-(Suction Reducer- 250 mm or size as per

Actual HSCF Pump Suction Flange) (Reducer

Length Size shall be as per Actual Site Requred)

Note:- (Delivery Expander- 200 mm or size as

per Actual HSCF Pump Delivery Flange)

(Reducer Length Size shall be as per Actual Site

5.1.1 Flanged Joints of Pipes, Fittings and Specials: 10 Nos. 434.00

Supply, Installation, Making of Flanged CI & GI

Pipes, Fittings and Specials Joints with all jointing

materials, rubber packing, nut bolts, labour etc.for

complete connection.

Size: 50 mm dia

5.1.2 Size: 200 mm dia 4 Nos. 837.00

5.1.3 Size: 250 mm dia 4 Nos. 1,007.00

5.1.4 Size: 300 mm dia 24 Nos. 1,223.00

5.1.5 Size: 350 mm dia 16 Nos. 1,442.00

6.1.1 M.S. PIPES & SPECIALS 15 RMT 5,752.05

Supply, Gas cutting of pipe, Fabrication, welding,

Installation, testing and commissioning of MS pipe

& Specials conforming to IS 3589 & flanges

confirming to IS 6392-PN-1.0, fabricated from MS.

plate with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply of

Size: 300 mm NB X 10 mm Thk

6.1.2 Size: 350 mm NB X 10 mm Thk 10 RMT 6,332.76

6.2.1 MS FITTINGS & SPECIALS: 1000 KG 70.67

Supply, Fabrication, Gas cutting of pipe, welding,

Installation, testing and commissioning of MS

flanged / plain ended specials and fittings like MS

reducer, expander, Metering bends, Tees, etc.

conforming to IS 3589, flanges confirming to IS

6392-PN- 1.0, fabricated from MS. plate with

necessary supports & anchoring. Pipe fabricated

from MS plate. (Excluding supply of flange)

Size: 350 mm NB mm x 10 mm Thk and Above

The scope also includes civil work, casting PCC

thrust block, chipping, grouting, supporting,etc.

require for laying & connecting the MS pipes &

fittings as require outside the pump house

6.2.2 Size: 350 mm NB mm x 10 mm Thk and Above 1000 KG 70.67

6.3.1 Providing epoxy coating to inside and outside pipe 14 Sq.m 332.00

line with two parts of Solvent free high build liquid

epoxy lining as per AWWA C210-07 Suitable for

potable water application & shall be approved by

CFTRI- India/BS 6920-UK/international standard

/NSF/ANSI/-61 2004 to be fit for contact with

potable water for human consumption with

micron thickness. inclusive of necessary materials

, labour ,Equipment ,Contractor's overhead charges

and profit and including all taxes.Size: 300 mm NB

6.3.2 Size 350 mm NB 11 Sq.m 332.00

6.4.1 Supply, welding , Installation, testing & 16 Nos. 3,930.78

commissioning of MS flat machined faced

flanges confirming to IS 6392 & drilled as per IS-

1538 with drilling off centre bolt holes and flange

thickness as per PN 1.0 including cutting &

Size : 300 mm NB Drilled

6.4.2 Size : 350 mm NB Drilled 8 Nos. 5,060.72

7.1.1 G.I. PIPES & FITTINGS: 15 RMT 387.00

Supply, installation, connection with equipments as

required, testing and commissioning of GI pipe

conforming to IS-1239 , Medium Duty with

coupling, tee, bend, union, elbow, flanges , etc as

all required fittings for connection complete with

gaskets, hardware, and required accessories as

per IS & Specifications

Size: 50 mm NB(For dwatering Pump)

8.1.1 DEWATERING PUMPS 1 Nos. 1,46,348.00

Supply, erection, testing and commissioning of

Non Clog Submersible Pump with C.I. casing &

CF8M impeller, including necessary accessories

and hadrwares, etc., 25m cable as required suitable

for 3 phase, 415 V, 50 Hz AC supply with min.

HP motor and necessary safety futures along with

pump monitoring unit for auto stop facilities, cable

termination / juction box of required terminal size,

supporting arrangement for pump and other

required accessories to be installed in dry well

Capacity: 30 m3/hr

Head: 15 m. Motor Rating: Mini. 2.2 kw (or higher

rating as reco. by pump manufacturer)

9.1.1 E.O.T. CRANE WITH HOIST 1 Nos 5,06,250.00

Providing & erecting Single girder type fully

electrically operated E.O.T. crane with electrically

operated hoist, class II duty, geared travelling

trolley with seven meter lift complete with long

travel rail track (40 mm sq. bar), moving or cross

girder, all three motions electrically operated by

suitable rating motor IP 54, control panel & down

pendant control block, brake, safety device, cables

form motor to starter panel & other required

accessories & tested as per IS Specifications.EOT

Crane with single/Box type girder having

motorised motion in all three directions,

manufactured as per IS - 807, IS 3938 & IS -

, class-II, complete with electrically operated hoist,

geared trolley, cross girder, rail track, brake, wire

rope drum, motors, safety device, pendant push

button, starter panel, cables from motor to starter

panel and all other required accessories like limit

switches, panel, power supply system (Fastoon

cable type), fasteners, epoxy painting, etc. and

tested to 25 % over load complete as per

specifications.Note: Minimum as specified

capacity or higher as per requirement such that

EOT crane capacity is min.1.25 times of the pump,

motor OR single heaviest component to be lifted

within pump house.Capacity : 2 Ton. (for Pump

Room)Lift : 10.00 m (max) (or as per actual site

condition)Span: 9 m-12 m(or as per actual site

condition)Bay length: 30.0 m (max.) (or as per

actual site condition)

10.1.1 Supplying & Fixing SMC Chequered plate having 5 Sq. 4,493.00

10 mm thickness, made out of SMC Confirming to Mtr.

IS 13410 & by Hot press Compression Moulding

technique Suitable cut & fixed with MS Angle

Frame to Fit Trench Widths as per site requirement

approved by engineer incharge.

Provide as per Actual Site Requirements.

11.1.1 CHLORINATION SYSTEM 4 Plant 2,10,642.00

SITC of wall mounted, FRP cabinet type, Vacuum

operated Chlorination plants with required piping,

fitting, valves, safety and testing kit, etc. Complete

arrangement shall be as per attached standard

drawing for one complete system combaining the

Two plants complete in all respect as per IS and as

per specsification(Without Chlorine

Cylinder).Capacity: 5 kg/hr. for each plant making

one complete plant as per attached standard

drawing and shall include the followings:(1) 1 No.

Submersible Pump motor set with continuous

Cable from pump to starter panel without any Joint

with proper conduit piping and clamping. (2) 1 No.

Diffusers, (3) 1 No. Ejector, (4) 1 No Chlorinator

(5) 1 No. Vacuum Regulators, (6) 1 No. Strainer

(7) 5 Nos. Isolation Ball Valves , (8) 1 Non Return

Valve, (9) 2 Nos. Yoke clamp (for cylinder), (10)

No. Pressure Gauge with require piping and

isolation valve, (11) 1 No. Chlorine Gauge at Cl2

manifold (12) 1 Lot of piping, fittings, valves &

instruments, (13) Vaccum Gauge , 14) MS support

of 50 mm x 50 mm x 4 mm thk, (15) 3C copper

armour power cable from PMCC panel to Chlorine

room of required size with proper piping &

Clamping as required. (16) 1- lot inter connecting

piping of identical pipe size of Cl2 booster pumps

delivery line with isolation valve. (17) 1 No.

common Starter panel with TPNB MCB with

necessary cabling & electrical connections etc. and

other necessary items as per IS & Tender

Specification and Data sheet for Cl2 booster

pumps,(18) 1 no common 3/4" Cl2 gas manifold of

Carbon steel suitable for two cylinder.(Note:-2

Nos. For Ghatlodia Vidhata WDS or As per

instruction of E-I-C.)

11.1.2 Supply of safety kit & testing as specified in the 2 Set 83,241.00

specifications.

(1) 1 Set Chloroscope

(2) 1 set. Air breathing apparatus for 45 min as per

IS with O2 bottle,

(3) 1 set. Emergency tool kit

(4) 1 No. Amonia Torch

(Note:-One Set. For Ghatlodia Vidhata WDS or

As per instruction of E-I-C)

11.1.3 AUTO SHUT OFF CHLORINE CYLINDER 2 Set 9,34,500.00

SITC of Automatic Chlorine cylinder shut off valve

for single chlorine cylinder (100 kg) for

chlorination system comprising of :

(1) 1 No. Pneumatic Auto shut off chlorine cylinder

route valve with actuator system with Air line filter,

Solenoid Valve, Air motor, Yoke clamp, etc. of

required capacity , size, rating

(2) 1 Lot, Control panel cum PLC with

interconnecting cables/wiring for Auto Shutt Off

chlorine Valve of Cylinder,

(3) 1 No, Air Compressor

(4) 1 Lot, uPVC-SCH 40, Air piping for Auto Shut

off valve as required,

(5)1 No Chlorine leak detector of 0-10 ppm

(6) 1 Lot, Interconnecting instrument & Power

(7) 1 No. Industrial Hooter,

(Note:-One Set. For Ghatlodia Vidhata WDS or

As per instruction of E-I-C.)

11.1.4 AUTOMATIC LEAK CHLORINE 2 Set 8,29,500.00

DISSOLVING SYSTEM

SITC of automatic leak chlorine dissolving system

in caustic neutralisation tank for (100 kg) cylinder

for chlorination system comprising of :01) 2 Nos.

FRP Hood for 100 kg Cl2 Cylinder02) 1 no CF Air

Blower03) 1 Lot Flex. PVC ducting Pipe,04) 1 No.

uPVC SCH 40- Diffuser,05) 1 No. Relay based

Control Panel06) 1 Lot Cable and Cable Tray for

Blower07) 1 No. PP + FRP Tank for Caustic

storage08) 1 Lot PP Isolation Ball Valve for Tank

Overflow/Drain09) 1 Lot Hadware, jointing &

misc. items as required to complete the work in all

respects & Civil Foundation.(Note:-One Set For

Ghatlodia Vidhata WDS or As per instruction of

11.1.5 TRAY FOR CHLORINE SOLUTION uPVC 300 RMT 420.00

Providing & Fixing approved make Perforated C

type tray made from CR sheet along with required

accessories to sustain the weight of uPVC pipe with

bends, tees and clamps for fixing of uPVC pipe and

all the fittings as required as per site condition. The

Perorated type tray shall be single or double needed

as per required and as per IS 2062/1079 and shall

be coated with hot deep galvanised as per IS

2629/4759 with coupler plate/Fish plate and GI

hardware like nut-bolt and washers, etc. erected

providing support as per specification and as per

instruction of E-I-C.

Size: 100 x 50 x 1.6 mm thk

(Note:- 150 Mtr or As per Actual Site

Requred.For Ghatlodia Vidhata WDS or As per

instruction of E-I-C.)

12.1.1 DISMANTLING OF EXISTING HSCF PUMP- 1 Job 50,000.00

Dismantling of All Existing Pump-Motor Set of

Existing Pump House covering with Plastic and

packing in Wooden Box with all required

accessories and transportation & stacking at AMC

store / site or As per instruction Given by The

Engineer In-Charge.

12.1.2 DISMANTLING, CARTING AND STACKING 1 Job 30,000.00

(Mechanical Items)

Dismantling of all existing Sluice Valve,

Expansion Bellow, Reduser Pipe on Suction Line

and Sluice Valves, NRV, Expansion Bellow,

Piping On Delivery Line and Drain Pumps, etc. of

Existing HSCF Pump House covering with Plastic

and packing in wooden box with all required

accessories and transportation & stacking at AMC

store / site or as per instruction given by the

engineer In-Charge.

12.1.3 DISMANTLING, CARTING AND STACKING 1 Job 80,000.00

(Electrical Items)

Dismantling of all existing PMCC, APFC Panel,

Cables, Cable Trays, lighting fixtures, existing

lighting wiring, Existing Street Light Poles

including loading, shifting & unloading at location

in plant compound as directed by Enng. in charge

TOTAL ESTIMATE OF MECHANICAL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev ADB of North West

Work Zone of AMC.

INSTRUMENTATION WORK

ITEM QTY UNIT RATE (in

1.1.1 PRESSURE MEASURING SYSTEM 4 Nos. 1,412.00

Supply, installation, testing & commissioning of

Bourden type Pressure Gauge glycerene filled having

150 mm dial with necessary fittings/accessories

(Manifold valve, nipples, etc. shall be in SS 316 only)

as per specifications & complete in all respects.

Range:0-6kg/sq.cm.

(On Delivery Pipe -Each HSCF Pump Set.)

1.1.2 Supply, installation, testing and commissioning of 4 Nos. 29,147.00

Digital Pressure Transmitter along with, manifold

valve, required fittings, tubing (all valves, fittings,

tubings, etc. shall be in SS 316 only) all accessories,

hardware, etc. complete in all respects as per

specifications and having following measurement

Range:0-6Kg/cm²

(On delivery Pipe- Each HSCF Pump Set. )

2.1.1 LEVEL MEASURING SYSTEM 1 Nos. 59,436.00

Supply, installation, testing and commissioning of

Ultrasonic type Level Transmitter along with all

required accessories, hardware, hardware, etc. complete

in all respects with local and remote display

(Microprocessor based indicator with LED / LCD

digital display), as per specification. The scope also

includes providing 4" flanged , puddle pipe approximate

300 mm long including fixing of the same in civil

structure slabe of pump house for mounting of level

Transmitter.The work also include all necessary work

like make hole,repair / modificationin existing slab,

etc.Level Transmitter having following measurement

ranges for liquid (Water) application:

Meas. Range: upto 10 m (at any one compartment of

The Scope also make hole in existiing civil structure and

installl the Level Sensor.

2.1.2 LEVEL MEASURING SYSTEM 1 Nos. 59,436.00

Supply, installation, testing and commissioning of

Ultrasonic type Level Transmitter along with all

required accessories with LED display 8" digit size &

Frame / Panel size min. (320 mm H X 650 mm W X

mm D) or higher with 4-20 mA Input at Pump house to

monitor the level of ESR in Pump house with all

required accessories complete in all respects as per

Meas. Range: upto 10 m For ESR

Note: For ESR Large Display shall be mounted in

2.1.3 Supply, installation, testing and commissioning of 1 Nos. 12,802.00

Float type Level Switch along with 10 mtr. Cable and

WP Junction Box (at wet well for dry run protection of

pumps) complete in all respects and as per

specification.The scope also includes providing 4"

flanged , puddle pipe approximate 300 mm long

including fixing of the same in civil structure slabe of

pump house for mounting of level switch.The work also

include all necessary work like make hole,repair /

modificationin existing slab, etc.Meas. Range: upto 6 m

(at any one compartment of sump for dry run protection

2.1.4 Supply, installation, testing & commissioning of Float 1 Nos. 17,718.00

& Board type level indicator along with all

accessories, hardware, etc.

complete in all respects as per specifications and having

following measurement ranges:

Meas. Range: upto 6 m (at any one compartment of

3.1.1 ELECTRO MAGNETIC FLOW METER 7 Nos. 1,27,851.00

Supply (AMC Store) of remote type Full Bore

Electromagnetic flow meter comprising of IP-68

Sensor, IP-65/66 remote transmitter with 10m cable

between sensor and transmitter,Panel mounted flow

indicator cum Totalizer along with all mounting

accessories, hardware, etc. complete in all respect and

as per specs and shall have following size and

measurement range. The scope also includes necessary

connection with header pipe.

Meter Size : 300 mm

Pipe size: 300 mm

Pipe Material : C.I. / M.S.

3.1.2 As per Item No. 3.1.1 8 Nos. 1,77,670.00

Meter Size : 350 mm

Pipe size: 350 mm

Pipe Material : C.I. / M.S.

3.1.3 As per Item No. 3.1.1 3 Nos. 2,15,321.00

Meter Size : 450 mm

Pipe size: 450 mm

Pipe Material : C.I. / M.S.

4.1.1 HOOKUP WITH EXISTING PLC PANEL 1 Job 70,000.00

Hookup of New Proposed Pump, MFM, PT, LT, Large

Display, MOV,etc. with existing PLC Panel shall be

carried out by success full bidder and AMC shall be

arrange to provide the access in Existing PLC Panel to

succesfull bidder for data hook of Proposed items and

programming in PLC for auto operation of pump as per

instruction of Client/ AMC.

5.1.1 INSTRUMENT CABLE & ACCESSORIES 200 MTR 141.00

'Supply, Laying, Installation, Connection, Termination,

Testing & Commissioning of Instrument Cables, along

with cable glands, lugs, cable trays, required junction

boxes, fittings and accessores as per specs.The unit rate

shall includea. Supply, loading & unloading of the cable

at site from store.B. Shifitng of cable from site store to

place of installation.c. Fixing of cable clamps, brackets,

supports, route markers etc. where ever required to fix

the cables safely.d. Excavation, back filling and

levelling of ground alongwith laying of fine sand,

protection bricks and other necessary civil material for

laying cables outside the building.e Testing and

submission of sketches & reports of all the cables

laid.POWER CABLE3C x 1.5sq.mm.Cable Length is

Approx. Provide as per Actual Site Requirements.

5.1.2 CONTROL CABLE 100 MTR 128.00

Cable Length is Approx. Provide as per Actual Site

5.1.3 CONTROL CABLE 50 MTR 410.00

5.1.4 SIGNAL CABLE 500 MTR 150.00

Cable Length is Approx. Provide as per Actual Site

5.2.1 INSTRUMENT CABLE TRAY 50 MTR 302.00

GI Perorated type cable tray shall be made out of

galvanized MS sheets of 2.0 mm thickness with

required asccessories . All material shall be Hot dip

galvanised (816 g/m2) as per IS 2629 as mentioned in

specification and tray hardware shall be in GI.

50 x 50 mm - Perforated type

Cable Length is Approx. Provide as per Actual Site

5.3.1 CABLE END TERMINATION AND 10 Nos. 57.00

CONNECTION 'Supply, fixing, connection, testing

and commissioning of double compression brass cable

glands and crimping type Bimetalic lugs / sockets with

necessary tools and equipments as specified in

specifications and IS complete in all respects. The

glands and lugs / sockets shall be suitable for cable size

and type mentioned above. The job also includes

earthing the glands and armour of the cable with

common earth bar or flexible copper mesh as

5.3.2 CONTROL CABLE 10 Nos. 49.00

5.3.3 CONTROL CABLE 12 Nos. 180.00

5.3.4 SIGNAL CABLE 15 Nos. 41.00

TOTAL ESTIMATE OF INSTRUMENTATION WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev ADB of North

work West Zone of AMC.

ELECTRICAL WORK

SR. QTY UNIT RATE AMOUNT

1.1.1 H.T. INDOOR SWITCH GEAR PANEL: 1 Set 3,71,541.00

'Supply, Installation, Testing and

Commissioning of 11 kV, 500 MVA, 630A,

Indoor, Extensible type, Horizontal draw out,

Motorised spring charging mechanism,1

breaker Vacuum Circuit Breaker Panel (1

No. Incomer cum outgoing), with EC grade

copper busbars along with required Resin cast

CT Dual primary & secondary, Cl: 0.5/5P10,

15VA, Digital MFM with RS 485 with 3 Line

Display, Class-0.5s and PT (dual secondary)

Cl:0.5/3P, min 200VA or higher for metering

and protection, 110V DC power pack for

individual incoming and outgoing feeder,

Annunciator, Space heater with Indication

lamp, Hooter, Indicating lamps, Numerical

Protection relay (Current & Voltage Based)

with RS 485 with combined protection for

3O/C+1E/F, S/C, Under & Over Voltage, Tfr.

Protection Aux. relay etc. High speed tripping

relay, Trip ckt supervision relay, Fuse failure

relay, Digital Power factor meter, Ammeter,

Voltmeter (Only I/C), A/M switch suitable for

PLC/SCADA etc. complete in all respects as

per IS, Specification.

1.2.1 H.V. CABLES 50 Mtr 1,261.00

Supply, laying, testing & commissioning of

kV, 3C x 240 sq.mm.XLPE (UE) armoured

H.V Cable stranded Aluminium conductor,

galvanised steel flat strip/ round wire

armoured, extruded PVC type ST2 sheathed,

heavy duty cable conforming to IS:7098 (Part-

2) & IEC:60502(Part-2).

1.3.1 Supply, Installation, Testing and 3 Nos. 6,985.00

Commissioning of the Heat shrinkable type

Indoor H.T.cable end terminations suitable

for 11 kV, 3C x 240 sq.mm. XLPE (UE)

armoured cable including necessary earth

connectivity connection, material &

consummables making the termination/ joint

complete ensuring the joint resistance is within

the permissble limit as per IS.

1.3.2 Supply, Installation, Testing and 1 Nos. 11,487.00

Commissioning of the Heat shrinkable type

outdoor H.T.cable end terminations suitable

for 11 kV, 3C x 240 sq.mm. XLPE (UE)

armoured cable including necessary earth

connectivity connection, material &

consummables making the termination/ joint

complete ensuring the joint resistance is within

the permissble limit as per IS.

2.1.1 DISTRIBUTION TRANSFORMER 1 No 16,06,500.00

SITC of Outdoor type, Three phase, oil

immerged, 11 / 0.433 KV, Energy Efficiency

Level -2, Distribution transformer of

KVA & voltage ratio, copper double wound,

vector group - Dyn11, HV delta connected &

LV star connected with neutral brought out

connected to provide separate earthing

terminals, bushing / cable box on HV side and

cable box on LV side suitable for cables or bus

duct as per requirement with standard fittings,

conforming to IS: 1180 (Part-1) / 2021 with

its latest amendment including first fill of

transformer oil & following accessories.(a) Oil

conservator with filling holes with cap and

prismatic oil level gauge, (b) Silica Gel

dehydrating breather charged with silica gel,

(c) Oil drain cum sampling valve with plug, (d)

Oil filter valve, (e) Lifting Eyes / Hooks / Lugs,

(f) Two earthing terminal, (g) Diagram and

rating plate, (h) Air release plug, (i) Explosion

vent with diaphragm, (j) Thermometer pocket,

(k) Four bi-directional plain roller with base

channel with hauling holes, (l) Fixed / Separate

type radiator banks , (m) Off circuit externally

operated tapping switch (For rating <

kVA), (n) 100 mm stem type oil temperature

indicator (For rating < 500 kVA), (o) Bucholtz

relay with shut off valve , (p) 150 mm dial type

oil temperature indicator with Alarm / Trip

contact (For rating ≥ 500 kVA), (q) 150 mm

dial type winding temperature indicator with

Alarm / Tip contact (For rating ≥ 1000 kVA),

(r) Marshalling box (For rating ≥ 500 kVA), (s)

150 mm dia. magnetic type oil gauge (For

rating ≥ 1600 kVA), (t) Inspection cover &

Jacking lugs. With off circuit tap changer as

per standard IS.Maximum Total Losses (kW)

3.1.1 LOW VOLTAGE (LT) PANEL BOARD 1 Nos. 23,32,070.00

SITC of PMCC Panel (50kA),

compartmentalised, floor mounted/ stand

mounted as per site, Extensible on both

ends,suitable for Manual & Auto operation -

Local & through PLC/SCADA operation as per

site conditions complete in all respects as per

Tender SLD / Specification / IS and including

following as minimum:

1) One Nos. FP 400 A Microprocessor MCCB

for I/C with Digital Voltmeter with Voltmeter

Selector Switch, Digital Power Factor Meter,

Digital Ammeter with Ammeter selector

switch, MFM with RS-485, R, Y, B, on, off,

trip Indicating lamps & TNC Switch, ON, E-

STOP, Reset Pushbutton, etc.

2) 400 A TPN Main busbars. (Main &

Auxiliary bus-bars size with current density

3) Four Nos. (2W + 2S) Soft starter for min.

kW Motor or higher as per pump Manufacturer

reco. with suitable derating and with 250 A

TPN Microprocessor MCCB, 150 A AC3 duty

line & Internal / External bypass

contactor,Minimum.Ten channel temperature

scanner with potential free contacts, fast acting

fuse, MFM with RS-485, door display key pad

& digital MPR+SPP with CBCT, on, off, trip

Indicating lamps & ON, E-STOP,

Local/Remote, Auto/ Manual selector switch &

LCS for Pump- MOV Actuator with Indication

& push button etc.

4) Tr. losses comp. fixed capacitor bank with,

Two no. 5 kVAR, One nos. 2 kVAR & One no.

1 kVAR capacitors bank each with capacitor

duty contactor, timer & 'D' curve MCB, etc. for

each transformer.

5)2 No. 250 A TPN microprocessor MCCB

feeder for 1 Nos for APFC Panel Feeder and

Nos for Borewell Feeder.

6) 1 No. 63A TPN MCCB feeders (for PDB -

Auxiliary accessories load)

7) One no. Outdoor lighting LDB feeder with

32ATPN 'C' curve MCB with 32A contactor &

8) 7 nos. 32A 'C' curve MCB feeders (for

Indoor and Outdoor LDB, 1 no. Chlorination

System,1 No. Dewatering Pump & 3 Nos. spare

9) 4 nos. 16A DP MCB feeders (for single

phase supply for 1nos. X'mer marshaling box,

HT Panel & 2 nos.Spare.)

10) 2 Nos. MOV Actuator 16A FP MCB

feeder for Header BF Valve and 1 nos. spare.

11) 3 nos. 400A/5A, Cl.-0.5 metering CT

12) 1nos. 400 A/5A, Cl.-1 CT for 1 no. APFC

13) 2nos. Multiplication relay for dry run

protection of pumps.

3.1.2 AUTOMATIC POWER FACTOR 1 Set 2,53,954.00

CORRECTION (APFC) PANEL :

SITC of 130 kVAR APFC Panel complete in

all respects as per SLD / Specification / IS and

including following as minimum:(1) 320 A FP

Microprocessor MCCB I/C.(2) 11 Steps

Microprocessor APFC Relay with sensitivity

10mA.(5) 1 no. 30 kVAR capacitor bank with

63A 'D' curve MCB & 30 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(6) 3 nos. 20 kVAR capacitor bank with

40A 'D' curve MCB & 20 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(7) 3 nos. 10 kVAR capacitor bank with

20A 'D' curve MCB & 10 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(8) 1 nos. 5 kVAR capacitor bank with

16A 'D' curve MCB & 10 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(9) 2 nos. 2 kVAR capacitor bank with

16A 'D' curve MCB & 10 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(10) 1 nos. 1 kVAR capacitor bank with

16A 'D' curve MCB & 10 kVAR Capacitor

duty contactor with timer, Auto and Manual

Switch.(11) All capacitors shall be Gas Filled

type with dielectric losses ≤ 0.2w/kVAR.

(Suitable for 0.95 or better Correction).

3.2.1 SITC of Lighting Distribution Board (LDB) 2 Nos. 7,494.00

3 Phase 4 Wire TPN, 6 way Prewired LDB

(One each for Indoor & Outdoor Lighting)

Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) &

16A SP MCB 'C' curve (9 nos.)

(At Panel Room)

3.2.2 SITC of Power Distribution Board (PDB) as 1 Nos. 9,869.00

3 Phase 4 Wire TPN, 8 way Pre-wired-MOG /

MOV PDB for Auxiliary accessories Load

power supply (For MOV Pump delivery

valves, valve at Header & for auxiliary load &

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 10 Nos. 32A 4P MCB 'C' Curve

3.2.3 LOCAL CONTROL STATION 6 Nos. 2,800.00

SITC of Pendant type ON_OFF LCS with

pushbutton set complete with Enclosure,

necessary mounting/ fixing arrangement on

wall / pipe support etc. to be installed near

motors for remote operation, etc. as per IS and

specifications. (including structural steel) (For

4 nos. HSCF Pump, 2 no. Chlorine Booster

3.2.4 SITC of Local Control Station with pendant 4 Nos. 4,500.00

type Open_Stop_Close pushbutton set and with

Open, Close, Trip & Local / Remote Indicating

Lamps complete with Enclouser, necessary

mounting/ fixing arrangement on wall / pipe

support etc. to be installed near motors for

remote operation, etc. as per IS and

specifications (including structural steel)

(For Delievery Valve of Each Pumps )

4.1.1 LOW VOLTAGE (LT) CABLES 100 Mtr 622.00

Supply and unloading & delivery at site,

storage & security at site of 1.1 kV,

A2XFY/2XWY XLPE insulated (IS 7098) /

PVC insulated (IS 1554) AL / Cu conductor

cables as per specification & IS. The cable

when laid outside the building shall be laid

underground in excavated trench, as per

specified method and shall be laid in prepared

trench on cable tray when laid inside the

3.5C x 185 sq. mm. A2XFY Cable (2 Runs for

Tr.1 to PMCC Panel)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.2 3.5C x 120 sq. mm. A2XFY Cable (1 Runs for 30 Mtr 423.00

From PMCC Panel to APFC Panel)Cable

Length is Approx. Provide as per Actual Site

4.1.3 3C x 120 sq. mm. A2XFY Cable (1 Runs for 200 Mtr 354.00

PMCC Panel to HSCF Pump-Motor set.)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB 300 Mtr 78.00

with TPN MCB at Sump & Pump House,

Outdoor LDB, Indoor LDB, 1nos. MOVPDB)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.5 4C x 10 sq. mm. 2XWY/2XFY Cable (For FP 100 Mtr 295.00

MCCB for 1 nos. PDB)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 500 Mtr 81.00

TPN MCB for Chlorination Room, TPN MCB

at PMCC room & Pump house maintenance

floor & Pump House floor, Chlorination

system, Motor Operated Valves,)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.7 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For 50 Mtr 86.00

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.8 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For 300 Mtr 177.00

Each Motor space heater(as required), HT

Panel, X'mer marshaling box Single Phase

Supply, for level switch)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.9 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 1 200 Mtr 130.00

Nos. Dewatering Motor LCS & 1no. Chlorine

Booster Pump LCS)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.10 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For 150 Mtr 115.00

Each Motor LCS with Ameter)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.11 10C x 1.5 sq.mm. 2XWY/2XFY Cable (2 Run 250 Mtr 230.00

Tr. to HT Panel control cable)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.12 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For 250 Mtr 390.00

Actuator LCS of Each Main Pump and

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.13 10Tride x 1.0 sq.mm. individual triad and 300 Mtr 460.00

overall shielded with aluminum mylar tape

Signal Cable for RTD & BTD of motor (1Run

Motor to S/S Panel)

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.2.1 CABLE END TERMINATION AND 4 Nos. 606.00

SITC of Double compression Weather proof

type Ni-Plated brass cable glands and crimping

type Bimetalic lugs / sockets with necessary

tools and equipments as specified in

specifications and IS.

The glands and lugs / sockets shall be suitable

for cable size and type mentioned below & as

per specificaitons.

1) Earthing the glands and armouring with

earthing clamp and jumper and also connecting

to common earth bar.

2) The job also includes, if necessary, supply &

fixing of extension busbar of same material on

MCCB or panel board terminal / connector to

connect more than one no. of parallel cables or

to connect higher size cable to lower size unit.

The job also includes earthing the glands and

armour of the cable with common earth bar or

flexible copper mesh.(Cable termination qty.

shall be as per site requirement)

3.5C x 185 sq. mm. A2XFY Cable (2 Runs for

Tr. 1 to PMCC Panel)

4.2.2 3.5C x 120sq. mm. A2XFY Cable (1 Runs for 2 Nos. 444.00

From APFC PANEL to PMCC Panel)

4.2.3 3C x 120 sq. mm. A2XFY Cable (1 Runs for 8 Nos. 431.00

Main PMCC Panel to HSCF Pump-Motor)

4.2.4 4C x 6 sq. mm. A2XFY Cable (For WR-DB 8 Nos. 111.00

with TPN MCB at Sump & Pump House,

Outdoor LDB, Indoor LDB, 1nos. MOVPDB)

4.2.5 4C x 10 sq. mm. A2XFY Cable (For TPN MCB 4 Nos. 128.00

for 1 nos. PDB)

4.2.6 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For 20 Nos. 77.00

TPN MCB for Chlorination Room, TPN MCB

at PMCC room & Pump house maintenance

floor & Pump House floor, Chlorination

system, Motor Operated Valves)

4.2.7 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For 60 Nos. 76.00

4.2.8 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For 12 Nos. 75.00

Each Motor space heater(as required), HT

Panel, X'mer marshaling box Single Phase

Supply, for level switch)

4.2.9 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 1 6 Nos. 150.00

Nos. Dewatering Motor LCS & 1no. Chlorine

Booster Pump LCS)

4.2.10 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For 8 Nos. 75.00

Each Delivery and Header LCS with Ameter)

4.2.11 10C x 1.5 sq.mm. 2XWY/2XFY Cable (2Run 8 Nos. 185.00

Tr. 1 to HT Panel control cable)

4.2.12 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For 8 Nos. 105.00

Actuator LCS of Each Main Pump and

4.2.13 10Tride x 1.0 sq.mm. individual triad and 6 Nos. 185.00

overall shielded with aluminum mylar tape

Signal Cable for RTD & BTD of motor (1Run

Motor to S/S Panel)

5.1.1 CABLE TRAY 300 Mtr. 402.00

SITC of GI ladder type cable trays with side

channels of size - 75 x 15 x 15 mm/ 100 x 15 x

15 mm & rungs of size - 35 x15 x 15 mm

spaced at 250 mm apart, fabricated from 2 mm

thick sheet steel in standard length of 2.5 meter,

duly hot dipped galvanized after fabrication as

per IS 2629- 1989/ IS 4759-1984 including

accessories such as coupler plates/ fish plates,

bends, tees, reducers, elbows, covers and

electro- galvanized hardware etc, erected on

existing support as per specification and

instruction of engineer in charge.

150 mm (W) x 100 mm (H) - Ladder type (

Tray RMT is Approx. Provide as per Actual

Site Requirements.)

5.1.2 300 mm (W) x 100 mm (H) - Ladder type ( 200 Mtr 456.00

Tray RMT is Approx. Provide as per Actual

Site Requirements.)

5.2.1 Supply & laying GI perforated type cable 200 Mtr. 228.00

trays with returned edge/ flange, fabricated

from 2.0 mm thk sheet steel in the standard

length of 2.5 mtrs, duly hot dipped galvanized

after fabrication as per IS 2629-1989 / IS 4759-

1984 including accessories such as coupler

plates/ fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized

hardware etc, erected on existing support as per

specification and instruction of engineer in

100 x 50 mm x 2.0 mm thick ( Tray RMT is

Approx. Provide as per Actual Site

5.2.2 150 x 50 mm x 2.0 mm thick ( Tray RMT is 200 Mtr 336.00

Approx. Provide as per Actual Site

5.3.1 Cable Trench, Laying & Installation of 20 Mtr 55.00

Cable: Making cable trench in soft soil of

suitable width of 90cms deep for laying cable

all over the run and back filling the same and

making the surface as normal ground as per IS

& Specification. (For laying HT & LT cable in

5.3.2 Cable Covering in Trench: Cable Covering 20 Mtr. 139.00

with second class bricks or cement tiles laid

cover the cable crosswise & also on both side

with covering of 7.5cms. Layer of sand above

& below cable (16 bricks per meter.) as per IS

& Specification. (For HT & LT cable trench)

6.1.1 Supply, laying and erection of 120 mm 100 Mtr 136.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming to IS

14930 II) with necessary connecting accessoies

of same material at required depth for laying of

cable below ground / road surface for enclosing

cable and back filling the same to make ground

as per original. (LT cable).

6.1.2 Supply, laying and erection of 90 mm 100 Mtr 95.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming to IS

14930 II) with necessary connecting accessoies

of same material at required depth for laying of

cable below ground / road surface for enclosing

cable and back filling the same to make ground

as per original. (For Motor cable )

6.1.3 Supply, laying and erection of 50 mm 20 Mtr 62.00

approved make Double Walled Corrugated

pipes (DWC) of polyethelene (confirming to IS

14930 II) with necessary connecting accessoies

of same material at required depth for laying of

cable below ground / road surface for enclosing

cable and back filling the same to make ground

as per original.

7.1.1 CHEMICAL EARTHING SYSTEM 3 Nos 10,489.00

SITC of Maintenance free chemical earthing

(copper) with earthpit of minimum bore size

dia. 225mm Safe Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS-3043:1987

/Tech spec. made of corrosion free Pipes

having Outer pipe dia of 48 mm having (plating

thickness as per IS) copper plating, Inner

corrosion free Hot dip galvanised (plating

thickness as per IS) pipe dia of 26 mm with

copper flat strip type connection terminal

14mm dia with constant ohmic value

surrounded by highly conductive corrosion

resistant chemical compound with high charge

dissipation suitable for electrical installation &

of 3Mtr. length of Pipe with two nos. 25Kg. bag

of Back filling compound.

NOTE: Earthing Resistance value & date shall

be painted on the chamber cover.

(2 nos.neutral of Tr.-1, HT Panel )

7.1.2 SITC of chemical earthing with earthpit of 9 Nos 7,025.00

minimum bore size dia. 225 mm Safe Earthing

Electrode consisting Pipe-in-Pipe Technology

as per IS-3043:1987 made of corrosion free

G.I. Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron

galvanising or copper coated solid steel road /

flat strip type connection terminal 14mm dia

with constant ohmic value surrounded by

highly conductive corrosion resistant chemical

compound with high charge dissipation

suitable for electrical installation of 11 kV &

440V of 2 Mtr. length of Pipe with one no.

25Kg. bag of Back filling compound.

(2nos. Each for body of Tr.1, PMCC And

Motor and other Electrical Accesories )

7.1.3 SITC of 50mm(w) x 6mm(T) etc. sizes as 115 Kg 77.00

required, HOT deep GI Strip including

supply & fixing using GI spacers, saddles

when laid inside the building and inclusive of

excavation & refilling of earth when laid

outside the building & interconnection with

earth pit & all electro-mechanical equipments.

(50X6 G.I Strip wt.2.3 kg/m, 2.3x50Mt.=kg.)

( Transformer, LT Panel and HT Panel etc.)

7.1.4 Supply, laying and erection of 25 mm(w) x 60 Kg 77.00

6mm(T) etc. sizes as required, HOT dip

galvanized GI Strip including supply &

fixing using GI spacers, saddles when laid

inside the building and inclusive of excavation

& refilling of earth when laid outside the

building & interconnection with earth pit & all

electro-mechanical equipments.

(25X6 G.I Strip wt.0.6 kg/m, 0.6x 100 Mt.=kg.)

7.1.5 Supply, laying and erection of 40mm(w) x 112 Kg 787.00

6mm(T) etc. sizes Copper Strip including

supply & fixing of bolts, saddles when laid

inside the building and inclusive of excavation

& refilling of earth when laid outside the

building & interconnection with earth pit & Tr.

7.1.6 Supply, laying and erection of 40 mm(w) x 6 188 Kg 77.00

mm(T) etc. sizes as required, HOT dip

galvanized GI Strip including supply &

fixing using GI spacers, saddles when laid

inside the building and inclusive of excavation

& refilling of earth when laid outside the

building & interconnection with earth pit & all

electro-mechanical equipments.

(40X6 G.I Strip wt1.88 Kg/m, 1.88 x

7.1.7 SITC of HOT Dip Galvanized iron strip wire 8 21 Kg 77.00

SWG (For LDB, PDB, LCS, etc.)(8 SWG G.I

8.1.1 INTERNAL WIRING 300 Mtr 95.00

SITC of Mains & outlet points wiring with

kV grade FRLS PVC insulated ISI marked

flexible stranded copper conductor wires with

medium class min. 25mm. dia. Rigid PVC

pipe and accessories to be erected concealed

in / to be run on surface / wall / ceiling with

following sizes as mentioned below. The unit

rate wirings shall be with connector, PVC

junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass

chromium / cadmium plated machine screws,

phase and neutral wires, green Earth continuity

wires etc. as required to complete wiring from

LDB panel to the final outlet termination

points. The wiring shall be as per IS:732,

IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire

sq.mm .as per tender specification & IS

8.1.2 (b) SITC of Mains wiring with 3 wire 2.5 300 Mtr 124.00

sq.mm as per tender specification & IS.

8.1.3 (c) SITC of Mains wiring with 4 wire 1.5 300 Mtr 114.00

sq.mm as per tender specification & IS.

8.1.4 (d) SITC of Mains wiring with 4 wire 2.5 300 Mtr 147.00

sq.mm as per tender specification & IS.

9.1.1 SITC of Point wiring for Light / fan / Bell / 40 Nos. 445.00

Primary Point with 2nos. 1.5 sq. mm & earth

wire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated

multistrand copper wires, pipe to be erected

concealed in flushed on wall / ceiling,

complete with 6A Tissino Type ISI marked

flush type switch / bell push & accessories

erected on metal / PVC Box covered with 3 mm

thick PC (Polycarbonate) / Acrylic sheet

with necessary lamp holder / ceiling Rose /

H. D. connector as directed with medium class

Rigid PVC pipe & accessories.

9.1.2 SITC of 6A independent Plug with 2 nos. 1.5 7 Nos 310.00

sq.mm Cu. Mains size wiring & earthwire of

1.5 sq.mm (green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand

copper wiress with medium class rigid pvc

pipe erected with ISI marked 3 / 5 Pin socket

and 6A Modular type switch and accessories

with earth continuity of following type erected

on PVC / Metal box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed.

( For HT Room / Pump House / LT Room /

Chlorination Room)

9.1.3 SITC of One 300/380 mm dia. Ex fan 16A 6 Nos 829.00

independent Plug point near Ex. Fan with

2nos. 4 sq.mm Cu. Mains size wiring &

earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires with medium class

Rigid PVC pipe and accessories to be

erected complete with Modular type switch &

5 pin Plug erected on PVC / Metal box covered

with appropriate front plate modules erected on

/ in wall / ceiling as per pipe erected with

following type of accessories. Plug point shall

be near Ex.Fan.

(For Pump House Room /Chlorination Room)

9.1.4 SITC of 6/16A independent Plug with 2nos. 4 6 Nos 601.00

sq.mm Cu. Mains size wiring & earthwire of

2.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated

multistrand copper wires with medium class

Rigid PVC pipe and accessories to be erected

on wall / ceiling, complete with ISI marked 3 /

5 Pin socket and tissino type switch erected

with earth continuity connection erected on

Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet. .

(For HT Room/Chlorination Room / Pump

House/ LT Room)

9.1.5 SITC of Single Phase 20A 3 Pin Metal clad 2 Nos. 845.00

Industrial Type Socket with plug top and 20A

SPMCB, suitable for flush mounting, in

SWG MS box of suitable size and covered with

3 mm thick electrical grade hylam sheet or

eqivalent ISI marked Electrical grade bakelite

sheet and earthing with 2.5 sq.mm insulated

copper wire run inside the conduit including

interconnections etc. complete as required.

( For Pump House/ LT Room)

9.1.6 SITC of 3 watts LED Lamps integral type,cool 2 Nos. 69.00

white with PC diffuser suitable for B22 LAMP

holder.(For Panel room, chlorine room door)

10.1.1 1200 mm sweep ceiling fan, capacitor type, 3 Set 1,581.00

having double ball bearing 450mm down rod,

canopies, shackle, rubber bush, blades,

electronic speed regulator, suitable to operate

on 230V,50Hz AC supply conforming to IS:

374/1979.Fan shall be painted with white

(For LT Panel / HT Room / Torrent Room )

10.2.1 380 mm sweep 1400 R.P.M exhaust fan, 6 Nos. 3,052.00

capacitor type, having double ball bearing,

M.S.blades, mounting frame, forearms,

suitable to operate on 230V,50 HZ AC supply

conforming to IS: 2312.Fan shall be painted

with epoxy grey colour controlled by one 6 A

flush type switch on board and 6A plug point

near Ex. fan. With Bird Net

(For Pump House/ LT Room and Chlorination

11.1.1 LED LIGHT FIXTURES: 30 Nos 530.00

SITC of Indoor wall mounting LED indoor

fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. &

corrosion resistance with diffuser and/or

Polycarbonate optics with company

mark/name 120 to 300 V,Power Factor more

than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficacy>

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80

40 Watt or up to 25% higher wattage Tube

Light with integral / non-integral driver, Surge-

2KV, IP-20, 4 feet, Cat-III

(For Existing Room/ LT Room/ Chlorination

Room/ Pump House)

11.1.2 SITC of Surface/Wall mounted LED Indoor 15 Nos. 6,028.00

Flood light fittings with High power White

LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT

Uniformity ratio >0.45, Luminaire efficacy>

85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80

90 Watt Indoor Flood Light (IP-65), Surge -

(for pump house cum Panel room)

11.1.3 SITC of 'B' class galvanised iron pipe 32 mm 15 Nos. 340.00

outside dia 45 cmslong duly welded on 20 cms

x 20 cms x 3 mm thick M.S. base plate, erected

on wall or corner for mounting luminaire with

necessary hardware materials duly painted for

wall mounting indoor flood light fixtures on

Wall of Buildings.

12.1.1 EXTERNAL LED LIGHT FIXTURES & 25 Nos. 6,028.00

SITC of Wall mounted 80W LED Outdoor

Flood Light fittings with High power White

LEDs wattage of 1Watt and above assembled

on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses with

company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95,

THD < 10 %, CCT 5000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy>

85 lumens/watt . LED driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80

Flood Light (IP-65), Surge -4KV, 80 watt

(for outside Area Lighting as per instruction

given by the engineer In-Charge.)

12.1.2 SITC of 'B' class galvanised iron pipe 32 25 Nos 340.00

mm outside dia 45 cms long duly welded on

cms x 20 cms x 3 mm thick M.S. base plate,

erected on wall or corner for mounting

luminaire with necessary hardware materials

duly painted for wall mounting indoor &

outdoor flood light fixtures on Wall of

13.1.1 SAFETY ACCESSORIES 4 Nos 8,586.00

SITC of following safety accessories

complete with necessary fixing brackets,

other accessories and tools etc. as required

to complete the job.

Supply & Erecting carbon dioxide (CO2) fire

extinguisher of 6.5 kg capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

(For X'mer./ HT Room/ LT Room/ Pump

13.1.2 Supplying stand first AID box with anticeptic 2 Nos. 297.00

cream, medicine for use on wounds due burn,

crepe bandage, guage bandage, medicated

ready to use bandage (Band-aid) adhesive tape

for medicinal user, scissors, anticeptic solution

(Savlon or similar) etc.

(All above contents shall be of standard makes)

(For Pump house / LT Room)

13.1.3 Supply & fixing of printed instruction (First 1 Nos. 129.00

Aid) Chart both in English and Gujarati and

duly framed with front glasses, for treatment of

person suffering from electric shock.

13.1.4 Supplying & fixing of FIRE bucket round 8 Set 212.00

bottom of 9 litres capacity made out of

guage G.I. sheet with extra handle at bottom

duly painted white inside and Red outside with

FIRE mark, filled with dry sand and kept on

stand provided or hung on wall hook.

13.1.5 Supplying and erecting floor mounting stand 1 Nos. 933.00

for keeping four nos. of FIRE buckets

comprising 1500 mm in length, 900 mm height

frame made out of 30mm X 30 mm X 4 mm

angle iron with cross supports for legs, welded

with 4 hooks and duly painted with one coat of

red lead and two coats of approved enamelled

13.1.6 Supply and fixing of 30 W fluorescent lamp 1 Nos. 4,912.00

operated emergency light with maintenance

free battery for 3 hours operation during mains

power failure.LED Portable/Rechargeable

flood light having die - cast aluminium

enclosure designed for maximum thermal

efficiency of 130lm luminous efficiency at

voltage supply between 140-270V AV/12V

DC at operating temperature of -20 degree to

60degree celcius with battery back up 3-4hrs

13.1.7 Supply and laying of Synthetic Insulating Mat 6 Mtr 1,017.00

of Class - B of min. thickness 2.5 mm as per

IS:15652 and with good electrical insulation

property for 11kV/22KV as per site

13.1.8 Supply and laying of Synthetic Insulating Mat 8 Mtr 763.00

of Class - A of min. thickness 2 mm as per

IS:15652 and with good electrical insulation

property for 1.1KV/3.3KV as per site

(for PMCC Panels)

13.1.9 Providing pair of rubber hand gloves ISI make 2 Nos. 212.00

suitable for working on 22 KV supply

14.1.1 MISCELLANEOUS: 500 kg 64.84

Providing, Supply of Structure Steel at site of

work with freight, loading, unloading carting,

etc. including all taxes and duties complete

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates (below 10mm thickness) etc. required

for support structure of Elecrto-Mechanical

equipments etc. for support on floor / wall /

beam / brackets etc. as per tender and IS.

14.2.1 Labour Charges for lowering, laying, Fixing 500 kg 11.36

with fabrication various size section of MS

such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered

plates etc Complete with two coats of red oxide

and two coats of approved colour shade of

epoxy paint as per relevant IS and as per

15.1.1 LIASONING CHARGES FOR 1 Ls 25,000.00

OBTAINING POWER / NOC:

Liasoning Charges for obtaining N.O.C from

Electrical Inspector / Statutory authority for

Power / Ele. Installation. (Fees shall be paid by

tenderer for obtaining N.O.C. from Electrical

Inspector / Statutory authority on behalf of

client and shall be reimbursed on submission of

orignial receipt to Client). Liasoning Charges

shall include preparing required attasted

documents & drawing for obtaining NOC on

behalf of client (Applicable Fees / deposits

shall be reimburse by Client).

TOTAL ESTIMATE OF ELECTRICAL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev ADB of North West

Work Zone of AMC.

SR. NO. ITEM QTY UNIT AMOUNT

Demolition of Brick work & stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift. (i) In cement

Demolition and disposal of unserviceable materials with all

lead and lift.(i) Unreinforced cement concrete

Demolition and disposal of stacking of serviceable

3 materials and disposal of unserviceable materials with all 10.00 1047.380 Cmt

lead and lift (i) R.C.C work

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

4 300 mm removal of stumps of trees cut earlier and disposal 1.00 79449.300 Hectare

of unserviceable materials (C) By mechanical means in

area of light jungle

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the disturbed

ground stacking useful materials as directed and disposing

as directed and disposing of the unserviceable materials

with all lead and lift.

Removing and scraping of old deteriorated plaster of any

thickness from all Structural & Non Structural member

including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

Supplying Electric breakar machine for RCC slab or

Asphalt demolishing work on site by using operator, fuel,

power supply etc. complete as directed.(no payment should

be allowed for non working condition of machinary and for

pipeline excavation and M.H. work.allowed only for break

down work)(based on previously approved rate by CE Sir)

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 mm

Add to or deduct from the rate for Bore Holes of 3.5 m

11 Depth, if bore holes are made deeper or shallower than 1.00 539.340 Each

3.5M. for Piles of following diameter.(iii) 300 mm

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ;

shape (Usually Uni-Paver Blocks) using black trap good

quality aggregate of 20 mm nominal size for footpath,

parking areas, service lanes and other areas as mentioned

in the drawing / instruction of engineer in charge. Cost

includes formworks using rubber mould, Rate providing

and laying paver blocks as per required grading and

specification. The paver block shall be mechanically

12 compacted. The work of paving blocks shall be executed in 395.00 383.040 Sq.mt

line and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of the paver

block to be necessary. If cutting of paver block necessary

then it should be cut by machine only and carting. The

finished surface of the paver block shall have reasonably

good, plain finished. Paver blocks shall be compacted and

shall be relaid if necessary. Gravel or such type of materials

shall not be allowed for production. Laying on 5 cms thick

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-

H Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of Sevaliya/Timba or

equivalent quality for pre-cast blocks, reasonably exposed

finish/ formwork , mould with well equipped with vibratory

system for kerb stones of approved design including curing,

etc. complete, including the cost of formwork etc.

complete. The rate shall also include necessary cutting of

asphalt, fixing the Kerb stones in line and level on 5 cm -

13 thick sand bedding with necessary equipments and

materials. The rate shall also include the flush pointing in

CM (1:3) for all joints of the kerbstones. Filling of zari

alone the sides of the kerb stone fixed with Bituminous

concrete Bituminous concrete / C.C. mixed in proper

position to flush with the road surface as directed by

Engineer in change to form a portable mixture.

Laying on 5 Cms thick sand Bedding

Laying on 5 Cms thick sand Bedding 55.00 350.890 Rmt

Removing any kind of pavement incl stacking of serviceble

14 material disposal of unserviceble material with 50 meter 10.00 14.000 Smt

Labour work for fixing above interlocking blocks on up to

50mm th sand bedding, levelling, watering and fixing. Rate

15 incl. average 30cm depth for excavation and or filling, 10.00 68.64 Smt

carting away debries/excavated material up to 5 km and

cleaning the site etc. Comp. as directed.

Excavation for foundation for loose and soft soil including

sorting out and stacking of useful materials and disposing

of the excavated stuff up to 50 meter lead.

Conveyance charge of earth, lime, murrum, building

17 rubbish, manual garbage, sludge, excavated rock, fly ash, 40.00 326.730 Cu.m.

aggregate of any kind etc. Upto 5.0 Km lead.

Conveyance charge of earth, lime, murrum, building

18 rubbish, manual garbage, sludge, excavated rock, fly ash, 10.00 334.140 Cu.m.

aggregate of any kind etc. 5Km to 10 Km lead.

Filling with available excavated earth (excluding rock) in

trenches, plinth, sides of foundation in layers not exceeding

20 cm in depth consolidating each deposited layer by

ramming and watering.

Providing and casting in situ C.C. in grade M-15 (approx.

corresp. to prop. 1:2:4) (proportions as per mix design or as

per Table 9 of IS456 2000 in masses by weigh batching )

using granite, quartzite trap metal of size 6 mm to 20 mm

20 for RCC work, including scaffolding centering, form work, 10.00 4906.000 Cu.m.

needle vibrated consolidation, curing comp. (excluding

cost of reinforcement and neat finishing) with centering and

shuttering/deshuttering etc. comp. for structure for other

than water retaining. Footing (with form work)

Providing and casting in situ C.C. in grade M-15 (approx.

corresp. to prop. 1:2:4) (proportions as per mix design or as

per Table 9 of IS456 2000 in masses by weigh batching )

using granite, quartzite trap metal of size 6 mm to 20 mm

for RCC work, including scaffolding centering, form

work, needle vibrated consolidation, curing comp.

(excluding cost of reinforcement and neat finishing) with

centering and shuttering/deshuttering etc. comp. for

structure for other than water retaining. Footing (without

Providing and cast in situ C.C. in grade M-20( proportions

as per mix design or as per table of IS456 2000 in masses

by weigh batching) using granite, quartzite trap metal of

size 6 mm to 20 mm for RCC Work including scaffolding

centering formwork, needle vibrated consolidation, curing -

complete up to 6 meter depth or height (excluding cost of

reinforcement and neat finishing) with centering and

shuttering/ deshuttering etc. complete for structure other

22 than water retaiing

A) RCC Footing 15.00 5520.000 Cu.m.

B) RCC column 5.00 7363.000 Cu.m.

C) RCC Beam 5.00 6722.000 Cu.m.

D) RCC Coping 5.00 6722.000 Cu.m.

E) RCC Slab 5.00 6504.000 Cu.m.

F) RCC Wall 10.00 6779.000 Cu.m.

Supply cutting, Bending, Binding and placing in position

steel as per plan and design and as per ISS 2502 including

cost of steel and binding wire for reservoirs/ structures only

23 including lift up to 6 meter height or depth below G.L. for 5.00 77504.000 MT

Deformed(TMT)bars confirming to relevant IS Fe-500

grade for all diameters.

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg / Sq. C. M. in

ramp, steps and Foundation & Plinth in cement morter1:5

(1 cement : 5 coarse sand) including racking out joints,

curing, scaffolding required if any etc. complete, as

directed. (B) Conventional

Brick masonry in cement mortar (1:5) using common burnt

clay building bricks having crushing strength not less than

35kg/cm2 including scaffolding,curing, etc. complete for

walls, parapets, etc. at all levels

20 mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick

26 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8 mm 105.00 297.680 Sq.mt

thick finishing coat of C.M. 1:1 (1-cement : 1 sand) etc.

Providing and applying 15 mm thick cement plaster in

single coat on brick work with floating coat of net cement

slurry for interior plastering of pumphouse and outside

27 plastering of sump upto finished even and smooth in 315.00 222.56 Sq.mt

Cement motar 1 : 3 (1 cement : 3 sand) including racking

out joint curing, scaffolding required if any, with necessary

cement finishing etc. complete as directed

Interior plain faced 15 mm thick cement plaster (1:3) with

floating coat of neat cement slurry on Underneath Ceiling

of top of UG tank where specified on drawings and or

engineer in charge at all levels including scaffolding,

curing, etc. complete. This rate shall include moulding

where specified.

Writing letter or figures on any surface with black japan Per

paint (stops, comas, hyphens and the like not to be Letter

measured and paid for separately) (i) Block Per

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Providing throating or plaster strip / ghishi and moulding

as instructed by Engineer in charge

Providing in line level plumb, fabricating and fixing three

row horizontal barbed wire fencing and punched tape

concertina coil of 9 turns per meter of 610 mm diameter

fixied with clips on top of the angle iron posts. The punched

tape concertina coil having sharp barbs at every 25 mm

spacing shall be 0.5 mm thick and 19 mm width and

weighting 13 Kg./100 mtr. (Average) as per manufacture's

specification. The rate shall also include providing and

fixed 1.20 mt. total long MS angle 40 x 40 x 6 mm @

mt. c/c spacing embedded in RCC column, angle posts shall

be painted with one coats of red oxide and two coats of

enamel paint of approved quality at top of compound wall.

Fabricating and fixing in position MS structural section

such as flat, pipes, plates, hold fast, anchoring bolts / bars

of required size including fixing, welding and two coats of

approved anti corrosive paint over prime coat of red-oxide

including RCC gate column as per drawing etc. complete

as directed by Engineer-in-charge.

2.2 m height and 6 m wide main , wicket gate and Toilet

White washing with lime on wall surface (two coats) to

give an even shade including thoroughly booming the

surface to remove all dirt, dust; mortar drops and other

Providing and laying broken Chine Mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over Cement mortar 1:3 to plain or slope and to

34 be tempered to bring mortar crème out upto surface using 20.00 739.89 Sq.mt

white cement including rounding of junctions and

extending them upto 15 cm. along the wall, clearing with

water and oxalic acid etc. as directed.

Distempering (two coats) with oil bound distemper of

approved brand and manufacture and of required shade on

undecorated wall surface to give an even shade, over and

including a priming coat with distemper primer of approved

brand and manufacturer after thoroughly brushing the

surface free from mortar dropping and other foreign matter

also including preparing the surface even and sand papered

Applying two coats of Birla(white cement based) or Asian

(acryliclapy putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matte

rand sand papered smooth

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

37 shade after thoroughly brushing the surface to remove all 113.40 Sq.mt

dirt and remains of loose powdered materials. Etc.

Providing and fixing standared extruded of alluminimum

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

38 : 2434, @ Wt. 0.643 Kg/mt.) with colour powder coated 11.34 1,163.92 Sq.m

alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation'

Providing and fixing wsh down watercloset

(Europeantype,W.C.Pan) with integral Por S trap including

jointing the trap with soil pipei n Cement Mortar1:1(1-

Cement:1-fine sand) (Seal and cover to beme asured and

paid for separately) (A)vitreous China Pattern :(i) in white

32 dia. C. P. brass half turn flush cock complete including

earthwork, bed concrete of 1:4:8

Providing and fixing flat back white colour vitreous china

wash basin 550 mm x 400 mm size with CI brackets painted

white. Wash basin shall have 15 mm dia GI supply pipe,

overflow chase, 15 mm dia pillar cock and stop cock with

PVC bottle trap and PVC pipe piece upto wall plus 32 mm

dia PVC waste pipe upto floor level connected to 32 mm

dia CI pipe below floor and connected to nearby floor trap

complete with unions and plumber's white soldered joints

with necessary cleaning eye, complete. All chases cut in

wall for fixing pipes shall be made good in CM (1:4).

Providing and fixing Flat Back Urinal ( Hindware-

44cmx31.5cmx26.5cm) or equivalent approved and of

approved shade including fixing the same in concealed CI

41 brackets, CP spreader, CP dome shaped waste coupling, CP 1.00 1,535.63 No

bottle trap with flanges, CP angle cock flush pipe making

inlet and out let connections all complete as per the

instruction of Engineer - In - Charge

Providing, laying and jointing in true line and level

U.P.V.C. Pipe (SCH-40) for including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two -

metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials

Providing & fixing gun metal check or non return full way

Providing and fixing brass screw down stop tap. (A) 15mm

Providing and fixing screw down bib taps of following

size.(C)Gun metal screw down bib tap. i) 15mm dia

Providing and fixing 150 mm x 100 mm intercepting sewer

46 trap embedded in concrete complete including excavation 2.00 976.000 No

and backfilling.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement: 2-coarses and :4- graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand : 6-Brick bats 40+50 mm size) inside plastering

15 mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand)finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement:

2-Coarses and : 4-stone aggregate 20 mm nominal size)

47 finished smooth complete including curing and festing (i) 1.00 11,314.02 No

Inside size 900mm x 1200 mm and 2.0 M. deep including

C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128kgs. (Wt. of cover

64Kg. and Wt. of frame 64Kg.) (A) With 230 mm thick

walls of brick msonry using brick having crushing strength

not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement : 5-Coarse sand) (1) A type depth 0.90 Metre for

150 mm diameter sewer.

Providing and fixing in position PVC vent pipes of 160 mm

dia 3 m length.

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with

49 C.I. screaed down or hinged grating including cost of 2.00 600.08 No

cutting and making good the walls and floor 100mm inlet

and 50mm outlet. (C) 100mm dia

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C. I. cover with frame of

300 mm x 300 mm size (inside) with standard weight. (i)

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and fixing100mm size P or Strap for water closet

squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand) (A)

52 Providing and laying (to level or slopes) and jointing with 75.00 288.23 Rmt.

stiff mixture of Cement Mortar in proportion 1:1 Selt

glazed stone ware pipes including testing of pipes and

joints complete.(B)150mm dia. (upto 10 ton)

Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg.Cm 2in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm internal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.)

53 (R.C.C. top slab e with 1:2:4 mix (1-cement :2- coarse sand 2.00 3,624.51 No

:4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete. (ii) Inside dimensions

500mmx700mm and 450mm deep for pipe line with one

or two inlets. (upto 10 ton)'

Providing and fixing over roof black colour PVC overhead

54 water tank of approved manufacture with all necessary 3.91 liter

fittings and connection etc,complete on terrace

Providing and fixing 600mm x 450mm bevelled edge

mirror of superior glass mounted on 6mm thick A.C sheet

or plywood sheet and fixed to wooden plugs with C.P

brasss crews (B)600mmx20mm size

Providing and laying white glazed tiles 6 mm thick in

flooring, treads of steps,walls and landing laid on a bed of

56 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 22.42 908.17 Sq.m

finishing with flush pointing in white cement (Upto 10 ton)

In Dedo1.) Floor

Constructing Slab type M.H. Chamber of the following size

including excavation, refilling, brick bats cement concrete

(1:5:10) of thickness 15 C.M., CC Channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick cement plaster

14 inside & outside (Only for shaft) in CM 1:3, finishing

with cement slurry, P/F 4 mm dia M.S.Steel HDPE coated

steps 35 cm c/c at 35 cm staggered in masonary CM 1:5,

57 RCC Slab in CC 1:1.5:3 of thickness 23 C.M., including 3.00 10177.680 No

Cantering & reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the cost of machine

hole seat cover etc..completed. of Size 1.00 X 1.40 meter

(Inside Clear,M.H. length should be parallel to the flow, for

pipe dia <= 800 mm) (Based on Drainage SOR 2009-

10)1.00 to 2.00 meter depth, (Slab at Ground level) for

Rainwater Collection Chamber

Constructing Chamber of following size including

excavation, refilling, BBCC (1:5:10) for foundation,

C.C.Channel (1:2:4), finished 15 mm thick cement plaster

inside in CM 1:3, finishing with cement slurry, Brick

masonary in CM 1:5 & excluding the cost of chamber seat

cover etc..completed. (Based on Drainage SOR 2009-10)

0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to

0.90meter for pipe dia <=150 mm. chamber for dewatering

Providing & Fixing F.R.C. MH seat cover incl. carting to

the work site etc. comp. Directed. (Based on rate of central

store) FRC medium duty Chamber seat cover (FRC) cover

706 x 556 x 50 mm rectangular cover frame size 600 x

mm clear opening outer size 816 x 666 x 100 mm (MD-10)

cover for dewatering Chamber

Providing F.R.C. MH seat cover incl. carting to the work

site etc. comp. Directed. (Based on rate of central store)

F.R.C. Extra Heavy Duty (EHD-35) machine hole Covers

& Frames Cover : 728mm ø & 100 mm thick circular cover,

35.00 MT load design, 100x2mm MS flat allround, 16mm

60 ø plain round bar for lifting the cover & should be fitted 3.00 2125.000 No

with plastic cups. Frame : 560 mm ø clear opening, outer

size- 888x888x175 mm. On the upper periphery of frame

25 x 3 mm wide MS flat should be well embed in concrete

to protect the edges of frame. FRC E.H.D.-35 machine hole

cover & frame described as above

Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of following

dia pipes at any convenient time. All damaged work shall

be well repaired as per instructions. etc..complete. (Based

on Drainage SOR 2009-10)

61 connection for dewatering

c) 700 mm to 900 mm dia 2.00 3125.000 No

Kota stone in Jams and Sills of the window and ventilation

62 and Door with one molding as directed by Engineer-in- 35.00 1107.000 Smt

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17 mm (of Jindal Section no : 2459 @ wt. of

0.738 Kg/mt), horizontal Three track member size 92mm x

31.75 mm x 1.30 mm (of Jindal Section no. 8688, @ Wt.

1.07 Kg/mt), vertical member of size 92mm x 31.75mm x

1.50 mm (of Jindal Section no. 8933, @ Wt. 1.06 Kg/mt.)

63 with sliding shutters of horizontal member size 40mm x 25.00 1568.270 Smt

18mm x .29 mm (of Jindal section no. 8947 @ wt.

Kg/mt.) vertical member of size 40mm x 18mm x 1.29mm

(of Jindal Section no. 8949 @ wt. of 0.456 Kg/mt with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. PH Window and LT room Windows

Providing and fixing standared extruded of alluminimum

section of size 63mm x 38.10mm x 1.2mm (Jindal Section

64 : 2434, @ Wt. 0.643 Kg/mt.) with colour powder coated 21.60 1163.920 Smt

alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

Providing & fixing in position aluminium grill with

micron natural matt brush finish anodised as per over all

size shown on the drawings and aluminium sections of

approved make conforming to IS:733 and IS : 1285, made

out of DG - 104 design ( Jindal or equivivelent ) fixed with

required size F channel, rawl plugs and screws or with

fixing clips, or with expansion hold esters including

65 necessary filling up of gaps at junctions, at top, bottom and 25.00 1750.000 Smt

sides with required PVC/neoprene felt etc. and aluminium

snap beading for glazing / panelling, C. P.brass/stainless

steel screws, including standard anodised aluminium

fittings and fixtures of approved make and of adequate size

and in adequate numbers, including cost and fixing of

fixtures etc. complete as per detailed drawings with all lead

Providing precast cement concrete jali or louvers 40 mm

thick 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

66 aggregate 6 mm nominal size) reinforced with 1.6 mm dia. 25.00 640.200 Smt

Mild steel wire including roughening, cleaning, fixing and

finishing in CM 1:3 and curing, painting complete

Supplying, fixing Push and Pull, 20 gauge rolling shutter of

approved make for the sizes indicated on drawings

including hood cover, channel sliding assembly, helical coil

67 springs, brackets, interlocking latches, locking 30.00 4277.000 Smt

arrangements, painting with 2 coats of enamel paint over

one coat of approved primer paint etc. complete. Shutters

having width below 3.5M (gear Operated)

Providing and laying cement concrete flooring 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including water proofing compound

68 finishing with a floating of neat cement slurry etc. complete 290.00 348.080 Smt

laid in one layer finished including necessary curing at

bottom of sump.

Average 50 mm thick

Providing and laying polished Kota stone slab flooring over

20 mm (average) thick base of cement mortar 1:6 (1 cement

69 : 6 coarse sand) laid over and jointed with grey cement 290.00 1085.480 Smt

slurry including rubbing and polishing etc. complete at LT

& HT, office room & Chlorine room. 30 mm thick

Providing and laying polished Kota stone slab 25 mm thick

in riser of steps, skirting Dedo & pillars laid on 10 mm thick

70 cement mortar 1:3 (1 cement : 3 coarse sand) and jointed 105.00 1,176.03 Smt

with grey cement slurry including rubbing and polishing

Providing and fixing 40mm dia. GI pipe medium weight

quality as openable type with angle iron support at 1.5 m

c/c using 75 x 75 x 10 mm angles, 1 m long with three rows

71 of pipes as railing including necessary painting with two 55.00 1397.000 Rmt

coats of approved quality oil paint over one coat of

approved primer including necessary welding, bolting

required, if any.

Painting two coats including priming coat on new steel &

other metal surfaces with enamel paint, brushing, interior

to give an even shade including cleaning the surface of

all dirt, dust, other foreign matter.

Providing, Fabricating & fixing WDS name board of Size

3.00mX0.60 made from ISA 50X50X5 mm M.S angle with

3 Nos supports at back side vertical member of angle size

1.1m ht incl 0.3 m hold fast inserted in compound wall with

73 necessary dismantling and fixing with cement concrete. 1.00 15,640.00 No.

The rate shall also incl 16 g M.S sheet of size 3.00X0.60

mt incl ACP Sheet with Printing letter with AMC logo as

directed by EIC. rate shall incl painting board with 2 coat

of enamal paint over one coat of anti-corrosive primer.

Providing, Fabricating & fixing caution board of size

1.50m x 0.60m made from ISA 40 x 40 x 5 mm MS angle

with 2 nos. supports at back side vertical member of of

angle size 1.10m height (inclu. 0.30m hold fast inserted in

compound wall with necessary dis-mantling and fixing

with cement concrete. The rate shall also include 14g MS

sheet of size 1.50mt x 0.60mt incl ACP Sheet with Printing

letter with logo as directed by EIC. rate shall incl painting

board with 2 coat of enamal paint over one coat of anti-

corrosive primer.

Providing and fixing Radium sign board of size 3.00mt x

75 0.60 mt made from ACP sheet with writing coloured 1.00 7,400.00 Nos.

reflected letter of WDS name board with necessary clamp

for hanging board at pump house etc. comp as directed by

Grouting with 1:3 cement, sand mortar for anchor bolt

pockets, machine bases, pipe sleeves, pockets holes, etc.

including roughening and cleaning of concrete surfaces,

curing, etc. complete.

TOTAL ESTIMATE OF CIVIL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical,

of Electrical, Instrumentation and Civil works for Water Distribution Station At

Work Bodakdev ADB of North West Zone of AMC.

Description Qty. Unit Amount

OFFICE FURNITURE

1 Office Table of size 1200 mm length X 600 1 Nos. 3,000.00

2 Steel Office Chair 3 Nos. 1,000.00

3 Steel Cupboard 1 Nos. 25,000.00

Ladder: Ladder shall be made out of light

aluminium allow of good strength. They

shall be of step ladder, foldable, self

4 supportig type with sperader of metalic 1 Nos. 6,000.00

angles or high strength.

Ladder: As per S.R. No.2.(i) 3 Meter long

Ladder: As per S.R. No.2.(ii) 6 Meter long

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

GRAND TOTAL OF TOOLS, TEST EQUIPMENTS & SPARE PARTS

Note: Above items shall be handed over to AMC before the commencement of O&M period

for new proposed Water Distribution Station at WDS of AMC.

Name Augmentation work with SITC of Pumping Machinery with related

of Mechanical, Electrical, Instrumentation and Civil works for Water

Work Distribution Station At Bodakdev ADB of North West Zone of AMC.

Item Qty. Unit Rate Amount

1 Existing HSCF Pump Motor set 3 Nos. -

Existing Distribution Transformer -

3 Existing LT Panel. 1 Lot. -

4 Existing APFC Panel 1 Lot. -

5 Existing HT VCB Panel 1 Lot. -

TOTAL OF BUYBACK AMOUNT (In Rs.) -

Notes: The rate of the items shall be deducted from the capital cost of the tender and

contractor shall carryout all items.

AMC will take final decision whether to sell item or not. If AMC does not sell

particular item, the bidder will not get rebate amount of that item.

SUMMARY OF COST

Name Augmentation work with SITC of Pumping Machinery with related Mechanical,

of Electrical, Instrumentation and Civil works for Water Distribution Station At

Work Bodakdev Trilok of North West Zone of AMC.

A. MECHANICAL WORK

B. INSTRUMENTATION WORK

C. ELECTRICAL WORK

TOOLS & TEST EQUIPMENTS

TOTAL AMOUNT OF CAPITAL COST (A + B + C + D + E)

TOTAL AMOUNT OF CAPITAL COST (A + B + C + D + E)

F. (EXCLUDING GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev Trilok of North West

Work Zone of AMC.

MECHANICAL WORK

ITEM QTY UNIT AMOUNT

1.1.1 HORIZONTAL SPLIT CASING 3 Nos. 4,63,830.00

CENTRIFUGAL PUMP WITH MOTOR

Supply, installation, testing and

commissioning of horizontal mounted, side

suction & side delivery type Horizontal Split

Casing Centrifugal Pump having CI Casing,

CF 8 M impeller & wear rings, SS410 Shaft &

shaft sleeves, Mechanical seal and suitable to

couple with TEFC squirrel cage IE3 efficiency

class Induction Motor, 3 Phase, 415 V, 50 Hz.,

AC supply, max. 1500 RPM synchronous

speed. The scope shall also include all required

accessories viz. CI drain rim type base plate,

Flex. coupling, coupling guard, foundation

bolts, min 25 mm dia. G.I. Class-B drain pipe

upto drain channel, etc. as per specification.

Capacity : 400 m³/hr

Motor Rating : 55 KW or as per Manfactuer

The scope also includes chipping, grouting,

altering the civil foundation to suit the new

pumpset as required and removal of debries

and cleaning the dry well.

INDUCTION MOTOR FOR ABOVE

Supply Installation Testing and

Commissioning (SITC) of approved make,

energy efficient, Efficiency Class-IE3,

horizontal foot mounting, solid shaft, squirrel

case, Induction Motor rating mini 55 kW or

higher as per IS, 3-Phase, 415V, 50Hz., AC

supply, maxi.1500 RPM synchronous speed

and having TEFC enclosure with Class F

insulation (temp. rise limited to Class B) with

2.1.1 VALVES 2 Nos. 3,057.00

Supply, Installation, testing and

commissioning of Manually gear operated

CI/DI Double Flanged, Rising Spindle type,

Sluice Valve conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with hot

dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size : 50 mm NB (Manually Operated - On

delivery pipe of Dewatering Pump )

2.2.1 Supply, installation, testing and 3 Nos. 1,45,535.00

commissioning of Electrically gear operated

CI/DI Double Flanged, Rising Spindle type,

Sluice Valve with actuator, integral

starter,etc. conforming to IS 14846 PN

with SS 304 seat rings and SS spindle with all

hot dipped galvanised hardware's, bolts, nuts &

washers, gaskets, etc. as per data sheet.

Size: 250mm NB (Electrically Operated - On

Delivery Pipe )

2.3.1 Supply, installation, testing and 3 Nos. 28,776.00

commissioning of double flanged CI/DI Dual

Plate Check Valve conforming to API

Class 300 / PN 1.6 with CS dual door, hinge

pin & stop pin of SS 410 , springs of AISI

and seat rings of SS 304 ( renewable ), along

with all required accessories, gaskets and

hardwares,etc. and as per specification.

Size : 250 mm NB (On Delivery Pipe)

3.1.1 Supply,Installation,Testin and Commissioning 3 Nos. 10,200.00

of double flanged Expansion Bellows

confirming to EJMA/IS standard with PN

rating & all necessary St.St. hardware's.

Size : 300 mm NBx 300 mm ( L )(On Suction

3.1.2 Size : 250 mm NBx 300 mm ( L )(On Delivery 3 Nos. 7,745.00

4.1.1 SITC of CI flanged reducer/expander 3 Nos. 3,364.00

conforming to IS 1538 with gaskets, hardware

and required accessories as per specifications.

Size: 300 mm X 200 mm X 600 mm (L)

Note:-(Suction Reducer- 200 mm or size as

per Actual HSCF Pump Suction Flange)

(Reducer Length Size shall be as per Actual

Note:- (Delivery Expander- 150 mm or size

as per Actual HSCF Pump Delivery Flange)

(Reducer Length Size shall be as per Actual

5.1.1 Flanged Joints of Pipes, Fittings and 10 Nos. 434.00

Supply, Installation, Making of Flanged CI &

GI Pipes, Fittings and Specials Joints with all

jointing materials, rubber packing, nut bolts,

labour etc.for complete connection.

Size: 50 mm dia

5.1.2 Size: 150 mm dia 4 Nos. 611.00

5.1.3 Size: 200 mm dia 4 Nos. 837.00

5.1.4 Size: 250 mm dia 18 Nos. 1,007.00

5.1.5 Size: 300 mm dia 12 Nos. 1,223.00

6.1.1 M.S. PIPES & SPECIALS 15 RMT 4,834.64

Supply, Gas cutting of pipe, Fabrication,

welding, Installation, testing and

commissioning of MS pipe & Specials

conforming to IS 3589 & flanges confirming

to IS 6392-PN-1.0, fabricated from MS. plate

with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply

Size: 250 mm NB X 10 mm Thk

6.1.2 Size: 300 mm NB X 10 mm Thk 10 RMT 5,752.05

6.2.1 MS FITTINGS & SPECIALS: 1000 KG 70.67

Supply, Fabrication, Gas cutting of pipe,

welding, Installation, testing and

commissioning of MS flanged / plain ended

specials and fittings like MS reducer,

expander, Metering bends, Tees, etc.

conforming to IS 3589, flanges confirming to

IS 6392-PN- 1.0, fabricated from MS. plate

with necessary supports & anchoring. Pipe

fabricated from MS plate. (Excluding supply

Size: 250 mm NB mm x 10 mm Thk and

Above Dia Size.

The scope also includes civil work, casting

PCC thrust block, chipping, grouting,

supporting,etc. require for laying & connecting

the MS pipes & fittings as require outside the

6.2.2 Size: 300 mm NB mm x 10 mm Thk and 1000 KG 70.67

Above Dia Size.

6.3.1 Providing epoxy coating to inside and outside 12 Sq.m 332.00

pipe line with two parts of Solvent free high

build liquid epoxy lining as per AWWA C210-

07 Suitable for potable water application &

shall be approved by CFTRI- India/BS 6920-

UK/international standard /NSF/ANSI/-61

2004 to be fit for contact with potable water for

human consumption with 406 micron

thickness. inclusive of necessary materials

labour ,Equipment ,Contractor's overhead

charges and profit and including all taxes.Size:

6.3.2 Size 300 mm NB 9 Sq.m 332.00

6.4.1 Supply, welding , Installation, testing & 12 Nos. 3,220.28

commissioning of MS flat machined faced

flanges confirming to IS 6392 & drilled as per

IS-1538 with drilling off centre bolt holes and

flange thickness as per PN 1.0 including

cutting & welding.

Size : 250 mm NB Drilled

6.4.2 Size : 300 mm NB Drilled 6 Nos. 3,930.78

7.1.1 G.I. PIPES & FITTINGS: 15 RMT 387.00

Supply, installation, connection with

equipments as required, testing and

commissioning of GI pipe conforming to IS-

1239 , Medium Duty with coupling, tee,

bend, union, elbow, flanges , etc as all

required fittings for connection complete with

gaskets, hardware, and required accessories

as per IS & Specifications

Size: 50 mm NB(For dwatering Pump)

8.1.1 DEWATERING PUMPS 2 Nos. 1,46,348.00

Supply, erection, testing and commissioning of

Non Clog Submersible Pump with C.I. casing

& CF8M impeller, including necessary

accessories and hadrwares, etc., 25m cable as

required suitable for 3 phase, 415 V, 50 Hz AC

supply with min. 3 HP motor and necessary

safety futures along with pump monitoring unit

for auto stop facilities, cable termination /

juction box of required terminal size,

supporting arrangement for pump and other

required accessories to be installed in dry well

Capacity: 30 m3/hr

Head: 15 m. Motor Rating: Mini. 2.2 kw (or

higher rating as reco. by pump manufacturer)

9.1.1 E.O.T. CRANE WITH HOIST 1 Nos 5,06,250.00

Providing & erecting Single girder type fully

electrically operated E.O.T. crane with

electrically operated hoist, class II duty, geared

travelling trolley with seven meter lift

complete with long travel rail track (40 mm sq.

bar), moving or cross girder, all three motions

electrically operated by suitable rating motor

IP 54, control panel & down pendant control

block, brake, safety device, cables form motor

to starter panel & other required accessories &

tested as per IS Specifications.EOT Crane with

single/Box type girder having motorised

motion in all three directions, manufactured as

per IS - 807, IS 3938 & IS - 3177 , class-II,

complete with electrically operated hoist,

geared trolley, cross girder, rail track, brake,

wire rope drum, motors, safety device, pendant

push button, starter panel, cables from motor

to starter panel and all other required

accessories like limit switches, panel, power

supply system (Fastoon cable type), fasteners,

epoxy painting, etc. and tested to 25 % over

load complete as per specifications.Note:

Minimum as specified capacity or higher as

per requirement such that EOT crane capacity

is min.1.25 times of the pump, motor OR

single heaviest component to be lifted within

Capacity : 2 Ton. (for Pump Room)

Lift : 10.00 m (max) (or as per actual site

Span: 9 m-12 m(or as per actual site condition)

Bay length: 30.0 m (max.) (or as per actual site

10.1.1 Supplying & Fixing SMC Chequered plate 5 Sq. 4,493.00

having 10 mm thickness, made out of SMC Mtr.

Confirming to IS 13410 & by Hot press

Compression Moulding technique Suitable cut

& fixed with MS Angle Frame to Fit Trench

Widths as per site requirement approved by

engineer incharge.

Provide as per Actual Site Requirements.

11.1.1 CHLORINATION SYSTEM 2 Plant 2,10,642.00

SITC of wall mounted, FRP cabinet type,

Vacuum operated Chlorination plants with

required piping, fitting, valves, safety and

testing kit, etc. Complete arrangement shall be

as per attached standard drawing for one

complete system combaining the Two plants

complete in all respect as per IS and as per

(Without Chlorine Cylinder).

Capacity: 5 kg/hr. for each plant making one

complete plant as per attached standard

drawing and shall include the followings:

(1) 1 No. Submersible Pump motor set with

continuous Cable from pump to starter panel

without any Joint with proper conduit piping

and clamping. (2) 1 No. Diffusers, (3) 1 No.

Ejector, (4) 1 No Chlorinator , (5) 1 No.

Vacuum Regulators, (6) 1 No. Strainer , (7)

Nos. Isolation Ball Valves , (8) 1 Non Return

Valve, (9) 2 Nos. Yoke clamp (for cylinder),

(10) 1 No. Pressure Gauge with require piping

and isolation valve, (11) 1 No. Chlorine Gauge

at Cl2 manifold (12) 1 Lot of piping, fittings,

valves & instruments, (13) Vaccum Gauge

14) MS support of 50 mm x 50 mm x 4 mm

thk, (15) 3C copper armour power cable from

PMCC panel to Chlorine room of required size

with proper piping & Clamping as required.

(16) 1- lot inter connecting piping of identical

pipe size of Cl2 booster pumps delivery line

with isolation valve. (17) 1 No. common

Starter panel with TPNB MCB with necessary

cabling & electrical connections etc. and other

necessary items as per IS & Tender

Specification and Data sheet for Cl2 booster

pumps,(18) 1 no common 3/4" Cl2 gas

manifold of Carbon steel suitable for two

12.2.1 Supply of safety kit & testing as specified in 1 Set 83,241.00

the specifications.(1) 1 Set Chloroscope(2)

set. Air breathing apparatus for 45 min as per

IS with O2 bottle,(3) 1 set. Emergency tool

kit(4) 1 No. Amonia Torch

12.3.1 AUTO SHUT OFF CHLORINE 1 Set 9,34,500.00

CYLINDER VALVE SYSTEM

SITC of Automatic Chlorine cylinder shut off

valve for single chlorine cylinder (100 kg) for

chlorination system comprising of :

(1) 1 No. Pneumatic Auto shut off chlorine

cylinder route valve with actuator system with

Air line filter, Solenoid Valve, Air motor,

Yoke clamp, etc. of required capacity , size,

(2) 1 Lot, Control panel cum PLC with

interconnecting cables/wiring for Auto Shutt

Off chlorine Valve of Cylinder,

(3) 1 No, Air Compressor

(4) 1 Lot, uPVC-SCH 40, Air piping for Auto

Shut off valve as required,

(5)1 No Chlorine leak detector of 0-10 ppm

(6) 1 Lot, Interconnecting instrument & Power

(7) 1 No. Industrial Hooter,

12.4.1 AUTOMATIC LEAK CHLORINE 1 Set 8,29,500.00

DISSOLVING SYSTEM

SITC of automatic leak chlorine dissolving

system in caustic neutralisation tank for (100

kg) cylinder for chlorination system

comprising of :

01) 2 Nos. FRP Hood for 100 kg Cl2 Cylinder

02) 1 no CF Air Blower

03) 1 Lot Flex. PVC ducting Pipe,

04) 1 No. uPVC SCH 40- Diffuser,

05) 1 No. Relay based Control Panel

06) 1 Lot Cable and Cable Tray for Blower

07) 1 No. PP + FRP Tank for Caustic storage

08) 1 Lot PP Isolation Ball Valve for Tank

09) 1 Lot Hadware, jointing & misc. items as

required to complete the work in all respects &

Civil Foundation.

12.5.1 TRAY FOR CHLORINE SOLUTION 150 RMT 420.00

Providing & Fixing approved make Perforated

C type tray made from CR sheet along with

required accessories to sustain the weight of

uPVC pipe with bends, tees and clamps for

fixing of uPVC pipe and all the fittings as

required as per site condition. The Perorated

type tray shall be single or double needed as

per required and as per IS 2062/1079 and shall

be coated with hot deep galvanised as per IS

2629/4759 with coupler plate/Fish plate and GI

hardware like nut-bolt and washers, etc.

erected providing support as per specification

and as per instruction of E-I-C.

Size: 100 x 50 x 1.6 mm thk

13.1.1 DISMANTLING OF EXISTING HSCF 1 Job 50,000.00

PUMP-MOTOR SETDismantling of All

Existing Pump-Motor Set of Existing Pump

House covering with Plastic and packing in

Wooden Box with all required accessories and

transportation & stacking at AMC store / site

or As per instruction Given by The Engineer

13.1.2 DISMANTLING, CARTING AND 1 Job 30,000.00

STACKING (Mechanical Items)

Dismantling of all existing Sluice Valve,

Expansion Bellow, Reduser Pipe on Suction

Line and Sluice Valves, NRV, Expansion

Bellow, Piping On Delivery Line and Drain

Pumps, etc. of Existing HSCF Pump House

covering with Plastic and packing in wooden

box with all required accessories and

transportation & stacking at AMC store / site

or as per instruction given by the engineer In-

13.1.3 DISMANTLING, CARTING AND 1 Job 30,000.00

STACKING (Electrical Items)

Dismantling of all existing Cables, Cable

Trays, lighting fixtures, existing lighting

wiring, Existing Street Light Poles including

loading, shifting & unloading at location in

plant compound as directed by Enng. in charge

SUPPLY ITEM AT RAIKHAD AMC STORE

14.1.1 HORIZONTAL SPLIT CASING 3 Nos. 12,36,480.00

CENTRIFUGAL PUMP WITH MOTOR

Supply of horizontal mounted, side suction &

side delivery type Horizontal Split Casing

Centrifugal Pump having CI Casing, CF 8 M

impeller & wear rings, SS410 Shaft & shaft

sleeves, Mechanical seal and suitable to

couple with TEFC squirrel cage IE3 efficiency

class Induction Motor, 3 Phase, 415 V, 50 Hz.,

AC supply, max. 1500 RPM synchronous

speed. The scope shall also include all required

accessories viz. CI drain rim type base plate,

Flex. coupling, coupling guard, foundation

bolts, min 25 mm dia. G.I. Class-B drain pipe

upto drain channel, etc. as per specification.

Capacity : 900 m³/hr

Motor Rating : 160 KW or as per

Manfactuer Standard

The scope also includes chipping, grouting,

altering the civil foundation to suit the new

pumpset as required and removal of debries

and cleaning the dry well.

INDUCTION MOTOR FOR ABOVE

Supply of approved make, energy efficient,

Efficiency Class-IE3, horizontal foot

mounting, solid shaft, squirrel case, Induction

Motor rating mini 160 kW or higher as per IS,

3-Phase, 415V, 50Hz., AC supply, maxi.1500

RPM synchronous speed and having TEFC

enclosure with Class F insulation (temp. rise

limited to Class B) with RTD/BTD.

15.1.1 VALVES 3 Nos. 64,491.00

Supply of Manually gear operated CI/DI

Double Flanged, Rising Spindle type, Sluice

Valve conforming to IS 14846 PN 1.0 with SS

304 seat rings and SS spindle with hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.

Size : 450 mm NB (Manually Operated - On

Suction pipe of HSCF Pump )

15.1.2 Supply of Electrically gear operated CI/DI 3 Nos. 1,77,848.00

Double Flanged, Rising Spindle type, Sluice

Valve with actuator, integral starter,etc.

conforming to IS 14846 PN 1.0 with SS

seat rings and SS spindle with all hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.

Size: 400mm NB (Electrically Operated - On

Delivery Pipe )

15.1.3 Supply of double flanged CI/DI Dual Plate 3 Nos. 83,509.00

Check Valve conforming to API 594 Class

300 / PN 1.6 with CS dual door, hinge pin &

stop pin of SS 410 , springs of AISI 304 and

seat rings of SS 304 ( renewable ), along with

all required accessories, gaskets and

hardwares,etc. and as per specification.

Size : 400 mm NB (On Delivery Pipe)

16.1.1 Supply of double flanged Expansion Bellows 3 Nos. 18,780.00

confirming to EJMA/IS standard with PN

rating & all necessary St.St. hardware's.

Size : 450 mm NBx 300 mm ( L )(On Suction

16.1.2 Size : 400 mm NBx 300 mm ( L )(On Delivery 3 Nos. 16,500.00

17.1.1 Supply of CI flanged reducer/expander 3 Nos. 8,410.00

conforming to IS 1538 with gaskets, hardware

and required accessories as per

specifications.Size: 450 mm X 350 mm X

mm (L) Note:-(Suction Reducer- 350 mm or

size as per Actual HSCF Pump Suction

Note:- (Delivery Expander- 300 mm or size

as per Actual HSCF Pump Delivery Flange)

NOTE: SUPPLY, INSTALLATION, TESTING, AND COMMISSIONING FOR BELOW ITEMS

FOR OTHER WDS LOCATION AS PER INSTRUCTION BY ENGINEER-IN-CHARGE.

18.1.1 HORIZONTAL SPLIT CASING 4 Nos. 12,61,480.00

CENTRIFUGAL PUMP WITH MOTOR

SITC of horizontal mounted, side suction &

side delivery type Horizontal Split Casing

Centrifugal Pump having CI Casing, CF 8 M

impeller & wear rings, SS410 Shaft & shaft

sleeves, Mechanical seal and suitable to

couple with TEFC squirrel cage IE3 efficiency

class Induction Motor, 3 Phase, 415 V, 50 Hz.,

AC supply, max. 1500 RPM synchronous

speed. The scope shall also include all required

accessories viz. CI drain rim type base plate,

Flex. coupling, coupling guard, foundation

bolts, min 25 mm dia. G.I. Class-B drain pipe

upto drain channel, etc. as per specification.

Capacity : 900 m³/hr

Motor Rating : 160 KW or as per

Manfactuer Standard

The scope also includes chipping, grouting,

altering the civil foundation to suit the new

pumpset as required and removal of debries

and cleaning the dry well.

INDUCTION MOTOR FOR ABOVE

SITC of approved make, energy efficient,

Efficiency Class-IE3, horizontal foot

mounting, solid shaft, squirrel case, Induction

Motor rating mini 160 kW or higher as per IS,

3-Phase, 415V, 50Hz., AC supply, maxi.1500

RPM synchronous speed and having TEFC

enclosure with Class F insulation (temp. rise

limited to Class B) with RTD/BTD.

19.1.1 VALVES 4 Nos. 67,251.00

SITC of Manually gear operated CI/DI

Double Flanged, Rising Spindle type, Sluice

Valve conforming to IS 14846 PN 1.0 with SS

304 seat rings and SS spindle with hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.

Size : 450 mm NB (Manually Operated - On

Suction pipe of HSCF Pump )

19.1.2 Supply of Electrically gear operated CI/DI 4 Nos. 1,79,819.00

Double Flanged, Rising Spindle type, Sluice

Valve with actuator, integral starter,etc.

conforming to IS 14846 PN 1.0 with SS

seat rings and SS spindle with all hot dipped

galvanised hardware's, bolts, nuts & washers,

gaskets, etc. as per data sheet.

Size: 400mm NB (Electrically Operated - On

Delivery Pipe )

19.1.3 Supply of double flanged CI/DI Dual Plate 4 Nos. 85,480.00

Check Valve conforming to API 594 Class

300 / PN 1.6 with CS dual door, hinge pin &

stop pin of SS 410 , springs of AISI 304 and

seat rings of SS 304 ( renewable ), along with

all required accessories, gaskets and

hardwares,etc. and as per specification.

Size : 400 mm NB (On Delivery Pipe)

20.1.1 SITC of double flanged Expansion Bellows 4 Nos. 18,780.00

confirming to EJMA/IS standard with PN

rating & all necessary St.St. hardware's.

Size : 450 mm NBx 300 mm ( L )(On Suction

20.1.2 Size : 400 mm NBx 300 mm ( L )(On Delivery 4 Nos. 16,500.00

21.1.1 SITC of CI flanged reducer/expander 4 Nos. 8,410.00

conforming to IS 1538 with gaskets, hardware

and required accessories as per specifications.

Size: 450 mm X 350 mm X 600 mm (L)

Note:-(Suction Reducer- 350 mm or size as

per Actual HSCF Pump Suction Flange)

21.1.2 Size: 400 mm X 300 mm X 600 mm (L)Note:- 4 Nos. 6,960.00

(Delivery Expander- 300 mm or size as per

Actual HSCF Pump Delivery Flange)

22.1.1 DISMANTLING AND RE-INSTALLING 4 Job 75,000.00

OF HSCF PUMP-MOTOR SET

Dismantling of 4 Nos. of HSCF Pump-Motor

Set and Re-Installing with All required

accessories and transportation & stacking

location At other WDS OR As per instruction

Given by The Engineer In-Charge. (Including

Transportation, Testing, Commissionning and

TOTAL ESTIMATE OF MECHANICAL WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev Trilok of North

Work West Zone of AMC.

INSTRUMENTATION WORK

ITEM QTY UNIT RATE AMOUNT

1.1.1 PRESSURE MEASURING SYSTEM 3 Nos. 1,412.00

Supply, installation, testing & commissioning of

Bourden type Pressure Gauge glycerene filled

having 150 mm dial with necessary

fittings/accessories (Manifold valve, nipples,

etc. shall be in SS 316 only) as per specifications

& complete in all respects.

Range:0-6kg/sq.cm.

(On Delivery Pipe -Each HSCF Pump Set.)

1.1.2 Supply, installation, testing and commissioning 3 Nos. 29,147.00

of Digital Pressure Transmitter along with,

manifold valve, required fittings, tubing (all

valves, fittings, tubings, etc. shall be in SS

only) all accessories, hardware, etc. complete in

all respects as per specifications and having

following measurement ranges:

Range:0-6Kg/cm²

(On delivery Pipe- Each HSCF Pump Set. )

2.1.1 LEVEL MEASURING SYSTEM 1 Nos. 59,436.00

Supply, installation, testing and commissioning

of Ultrasonic type Level Transmitter along with

all required accessories, hardware, hardware,

etc. complete in all respects with local and

remote display (Microprocessor based indicator

with LED / LCD digital display), as per

specification. The scope also includes providing

4" flanged , puddle pipe approximate 300 mm

long including fixing of the same in civil

structure slabe of pump house for mounting of

level Transmitter.The work also include all

necessary work like make hole,repair /

modificationin existing slab, etc.Level

Transmitter having following measurement

ranges for liquid (Water) application:

Meas. Range: upto 10 m (at any one

compartment of sump)

The Scope also make hole in existiing civil

structure and installl the Level Sensor.

2.1.2 Supply, installation, testing and commissioning 1 Nos. 12,802.00

of Float type Level Switch along with 10 mtr.

Cable and WP Junction Box (at wet well for dry

run protection of pumps) complete in all respects

and as per specification.The scope also includes

providing 4" flanged , puddle pipe approximate

300 mm long including fixing of the same in

civil structure slabe of pump house for mounting

of level switch.The work also include all

necessary work like make hole,repair /

modificationin existing slab, etc.

Meas. Range: upto 6 m (at any one compartment

of sump for dry run protection of pump)

2.1.3 Supply, installation, testing & commissioning of 1 Nos. 17,718.00

Float & Board type level indicator along with

all accessories, hardware, etc.complete in all

respects as per specifications and having

following measurement ranges:Meas. Range:

upto 6 m (at any one compartment of sump)

3.1.1 HOOKUP WITH EXISTING PLC PANEL 1 Job 35,000.00

Hookup of New Proposed Pump, MFM, PT, LT,

Large Display, MOV,etc. with existing PLC

Panel shall be carried out by success full bidder

and AMC shall be arrange to provide the access

in Existing PLC Panel to succesfull bidder for

data hook of Proposed items and programming

in PLC for auto operation of pump as per

instruction of Client/ AMC.

4.1.1 INSTRUMENT CABLE & ACCESSORIES 200 MTR 141.00

'Supply, Laying, Installation, Connection,

Termination, Testing & Commissioning of

Instrument Cables, along with cable glands,

lugs, cable trays, required junction boxes,

fittings and accessores as per specs.

The unit rate shall include

a. Supply, loading & unloading of the cable at

site from store.

B. Shifitng of cable from site store to place of

c. Fixing of cable clamps, brackets, supports,

route markers etc. where ever required to fix the

d. Excavation, back filling and levelling of

ground alongwith laying of fine sand, protection

bricks and other necessary civil material for

laying cables outside the building.

e Testing and submission of sketches & reports

of all the cables laid.

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.2 CONTROL CABLE 100 MTR 128.00

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.1.3 CONTROL CABLE 100 MTR 410.00

4.1.4 SIGNAL CABLE 500 MTR 150.00

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.2.1 INSTRUMENT CABLE TRAY 50 MTR 302.00

GI Perorated type cable tray shall be made out of

galvanized MS sheets of 2.0 mm thickness with

required asccessories . All material shall be Hot

dip galvanised (816 g/m2) as per IS 2629 as

mentioned in specification and tray hardware

shall be in GI.

50 x 50 mm - Perforated type

Cable Length is Approx. Provide as per

Actual Site Requirements.

4.3.1 CABLE END TERMINATION AND 10 Nos. 57.00

'Supply, fixing, connection, testing and

commissioning of double compression brass

cable glands and crimping type Bimetalic lugs /

sockets with necessary tools and equipments as

specified in specifications and IS complete in all

respects. The glands and lugs / sockets shall be

suitable for cable size and type mentioned above.

The job also includes earthing the glands and

armour of the cable with common earth bar or

flexible copper mesh as applicable.

4.3.2 CONTROL CABLE 10 Nos. 49.00

4.3.3 CONTROL CABLE 12 Nos. 180.00

4.3.4 SIGNAL CABLE 15 Nos. 41.00

TOTAL ESTIMATE OF INSTRUMENTATION WORK (WITHOUT GST)

Name Augmentation work with SITC of Pumping Machinery with related Mechanical, Electrical,

of Instrumentation and Civil works for Water Distribution Station At Bodakdev Trilok of North

work West Zone of AMC.

ELECTRICAL WORK

1.1.1 SITC of Lighting Distribution Board (LDB) as 2 Nos. 7,494.0

3 Phase 4 Wire TPN, 6 way Prewired LDB (One

each for Indoor & Outdoor Lighting) Suitable to

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A SP

MCB 'C' curve (9 nos.)

(At Panel Room)

1.1.2 SITC of Power Distribution Board (PDB) as 1 Nos. 9,869.0

3 Phase 4 Wire TPN, 8 way Pre-wired-MOG / MOV

PDB for Auxiliary accessories Load power supply

(For MOV Pump delivery valves, valve at Header &

for auxiliary load & spare):

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 10 Nos. 32A 4P MCB 'C' Curve

1.1.3 LOCAL CONTROL STATION 5 Nos. 2,800.0

SITC of Pendant type ON_OFF LCS with

pushbutton set complete with Enclosure, necessary

mounting/ fixing arrangement on wall / pipe support

etc. to be installed near motors for remote operation,

etc. as per IS and specifications. (including structural

steel) (For 3 nos. HSCF Pump, 2 no. Chlorine

1.1.4 SITC of Local Control Station with pendant type 4 Nos. 4,500.0

Open_Stop_Close pushbutton set and with Open,

Close, Trip & Local / Remote Indicating Lamps

complete with Enclouser, necessary mounting/

fixing arrangement on wall / pipe support etc. to be

installed near motors for remote operation, etc. as per

IS and specifications (including structural steel)

(For Delievery Valve of Each Pumps )

2.1.1 LOW VOLTAGE (LT) CABLES 300 Mtr 243.00

Supply and unloading & delivery at site, storage &

security at site of 1.1 kV, A2XFY/2XWY XLPE

insulated (IS 7098) / PVC insulated (IS 1554) AL /

Cu conductor cables as per specification & IS. The

cable when laid outside the building shall be laid

underground in excavated trench, as per specified

method and shall be laid in prepared trench on cable

tray when laid inside the building.

3C x 70 sq. mm. A2XFY Cable (1 Runs for PMCC

Panel to HSCF Pump-Motor set.)

Cable Length is Approx. Provide as per Actual Site

2.1.2 3C x 35 sq. mm. A2XFY Cable (2 Runs for PMCC 80 Mtr 144.00

Panel to Existing Polder Pump.)

Cable Length is Approx. Provide as per Actual Site

2.1.3 4C x 6 sq. mm. A2XFY Cable (For Outdoor LDB, 300 Mtr 78.00

Indoor LDB, 1nos. MOVPDB)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.4 4C x 10 sq. mm. 2XWY/2XFY Cable (For FP 100 Mtr 295.00

MCCB for 1 nos. PDB)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.5 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN 500 Mtr 81.00

MCB for Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor & Pump

House floor, Chlorination system, Motor Operated

Valves,)Cable Length is Approx. Provide as per

Actual Site Requirements.

2.1.6 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor 50 Mtr 86.00

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 300 Mtr 177.00

Motor space heater(as required),for level switch)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 1 Nos. 200 Mtr 130.00

Dewatering Motor LCS & 1no. Chlorine Booster

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 150 Mtr 115.00

Motor LCS with Ameter)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.10 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Actuator 250 Mtr 390.00

LCS of Each Main Pump and Header)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.1.11 10Tride x 1.0 sq.mm. individual triad and overall 300 Mtr 460.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

Cable Length is Approx. Provide as per Actual

Site Requirements.

2.2.1 CABLE END TERMINATION AND 4 Nos. 302.00

SITC of Double compression Weather proof type Ni-

Plated brass cable glands and crimping type

Bimetalic lugs / sockets with necessary tools and

equipments as specified in specifications and IS.

The glands and lugs / sockets shall be suitable for

cable size and type mentioned below & as per

specificaitons.

1) Earthing the glands and armouring with earthing

clamp and jumper and also connecting to common

2) The job also includes, if necessary, supply &

fixing of extension busbar of same material on

MCCB or panel board terminal / connector to

connect more than one no. of parallel cables or to

connect higher size cable to lower size unit. The job

also includes earthing the glands and armour of the

cable with common earth bar or flexible copper

mesh.(Cable termination qty. shall be as per site

3C x 70 sq. mm. A2XFY Cable (1 Runs for Main

PMCC Panel to HSCF Pump-Motor)

2.2.2 3C x 35 sq. mm. A2XFY Cable (2 Runs for PMCC 4 Nos. 219.00

Panel to Existing Polder Pump.)

2.2.3 4C x 6 sq. mm. A2XFY Cable (For WR-DB with 8 Nos. 111.00

TPN MCB at Sump & Pump House, Outdoor LDB,

Indoor LDB, 1nos. MOVPDB)

2.2.4 4C x 10 sq. mm. A2XFY Cable (For TPN MCB for 4 Nos. 128.00

2.2.5 4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN 20 Nos. 77.00

MCB for Chlorination Room, TPN MCB at PMCC

room & Pump house maintenance floor & Pump

House floor, Chlorination system, Motor Operated

2.2.6 3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor 60 Nos. 76.00

2.2.7 2C x 2.5 sq. mm. 2XWY/2XFY Cable (For Each 12 Nos. 75.00

Motor space heater(as required), HT Panel, X'mer

marshaling box Single Phase Supply, for level

2.2.8 5C x 1.5 sq. mm. 2XWY/2XFY Cable (For 1 Nos. 6 Nos. 150.00

Dewatering Motor LCS & 1no. Chlorine Booster

2.2.9 7C x 1.5 sq.mm. 2XWY/2XFY Cable (For Each 8 Nos. 75.00

Delivery and Header LCS with Ameter)

2.2.10 12C x 1.5 sq.mm. 2XWY/2XFY Cable (For Actuator 8 Nos. 105.00

LCS of Each Main Pump and Header))

2.2.11 10Tride x 1.0 sq.mm. individual triad and overall 6 Nos. 185.00

shielded with aluminum mylar tape Signal Cable for

RTD & BTD of motor (1Run Motor to S/S Panel)

3.1.1 CABLE TRAY 200 Mtr. 402.00

SITC of GI ladder type cable trays with side

channels of size - 75 x 15 x 15 mm/ 100 x 15 x

mm & rungs of size - 35 x15 x 15 mm spaced at

mm apart, fabricated from 2 mm thick sheet steel in

standard length of 2.5 meter, duly hot dipped

galvanized after fabrication as per IS 2629- 1989/ IS

4759-1984 including accessories such as coupler

plates/ fish plates, bends, tees, reducers, elbows,

covers and electro- galvanized hardware etc, erected

on existing support as per specification and

instruction of engineer in charge.

150 mm (W) x 100 mm (H) - Ladder type ( Tray

RMT is Approx. Provide as per Actual Site

3.1.2 300 mm (W) x 100 mm (H) - Ladder type ( Tray 100 Mtr 456.00

RMT is Approx. Provide as per Actual Site

3.2.1 Supply & laying GI perforated type cable trays 100 Mtr. 228.00

with returned edge/ flange, fabricated from 2.0 mm

thk sheet steel in the standard length of 2.5 mtrs, duly

hot dipped galvanized after fabrication as per IS

2629-1989 / IS 4759-1984 including accessories

such as coupler plates/ fish plates, bends, tees,

reducers, elbows, covers and electro-galvanized

hardware etc, erected on existing support as per

specification and instruction of engineer in charge.

100 x 50 mm x 2.0 mm thick ( Tray RMT is

Approx. Provide as per Actual Site

3.2.2 150 x 50 mm x 2.0 mm thick ( Tray RMT is 100 Mtr 336.00

Approx. Provide as per Actual Site

3.3.1 Cable Trench, Laying & Installation of Cable: 20 Mtr 55.00

Making cable trench in soft soil of suitable width of