Construction of new Shapur Sub Division office Building and Dismantling old existing Sub division office building at Shapur under Junagadh Circle.

Name of Work: Construction of new Shapur Sub Division office building and dismantling old

existing Sub Division office Building at Shapur under Junagadh circle.

PARTCULARS OF ITEM QTY PER RATE AMOUNT

1 Excavation for foundation up to 1.5 M. depth. Incl. sorting out

and stacking of useful materials and disposing of the excavated

stuff up to 50 meter. Lead in - Loose or soft soil. 150.00 Cmt. 115.92

2 Excavation for foundation up to 1.5 M. depth. Incl. sorting out

and stacking of useful materials and disposing of the excavated

stuff up to 50 meter Lead.(B) Dense or Hard soil. 75.00 Cmt. 148.19

3 Excavation for foundation up to 1.5 to 3.0 M. depth. Incl.

sorting out and stacking of useful materials and disposing of the

excavated stuff up to 50 meter. Lead in -Hard Murram 96.00 Cmt. 270.83

4 Filling in foundation and plinth with murrum or selected soil in

layers of 20 cm. Thickness including watering ramming and

consolidating etc. comp 740.00 Cmt. 286.20

5 Filling in plinth with sand under floors including watering

remming, consolidating and dressing complete (morethan 10 ton)

6 Providing and layin cement concrete 1:3:6(1 CEMENT: 3-

Coarse sand: 6 - Hand broken stone aggregate 40MM nominal

Size) and curing complete excluding the cost of formwork in.-

Foundations and plinth. 186.00 Cmt. 2976.00

7 Providing and laying cement concrete 1:2:4 (1cement : 2coarse

sand : 4 graded stone aggregate 20 mm. Nominal size) and

curing complete excluding cost of form work in : (A-Foundation

and Plinth 39.00 Cmt. 3661.30

8 Providing and laying controlled cement concrete M.150 and

curing etc complete, including the cost of form work and the

cost of reinforcement for R.C.C. work in . - Foundations,

bedding of footings. 3.00 Cmt. 4910.89

9 Providing and laying controlled cement concrete M 250 and

curing complete including the cost of form work and excluding

reinforcement for reinforced complete work in foundation

footings, Base of Columns and mass concrete. 38.00 Cmt. 5277.54

10 Providing and laying controlled cement concrete M 250 and

curing complete including the cost of form work and excluding

reinforcement for reinforced complete work for Columns,Pillars

Posts and Struts up to floor two level. G.F. 21.00 Cmt. 8463.75

11 Providing and laying controlled cement concrete M 250 and

curing complete including the cost of form work and excluding

reinforcement for reinforced complete work for Columns,Pillars

Posts and Struts above floor two level. F.F 12.50 Cmt. 8503.60

12 Providing & laying controlled concrete M 250 and finishing

smooth with curing etc complete including the cost of form

work but excluding the cost of reinforcement for R.C.C. Work

in Beams upto floor two level of G.F. 46.00 Cmt. 6627.10

13 Providing & laying controlled concrete M 250 and finishing

smooth with curing etc complete including the cost of form

work but excluding the cost of reinforcement for R.C.C. Work

in Beams above floor two level of F.F 8.00 Cmt. 6666.95

14 Providing & laying controlled concrete M-250 and finishing

smooth with curing etc complete including the cost of form

work but excluding the cost of reinforcement for R.C.C. Work

upto floor two level in Stair. 3.50 Cmt. 7041.47

PARTCULARS OF ITEM QTY PER RATE AMOUNT

15 Providing & laying controlled concrete M-250 and finishing

smooth with curing etc complete including the cost of form

work but excluding the cost of reinforcement for R.C.C Slab

upto floor two level of G.F. 37.00 Cmt. 7016.07

16 Providing & laying controlled concrete M-250 and finishing

smooth with curing etc complete including the cost of form

work but excluding the cost of reinforcement for R.C.C Slab

above floor two level of F.F 14.50 Cmt. 7055.92

17 Constructing 125 mm thick Controlled cement concrete M-

Grade with Trimix flooring with power trowling sheet form

work with M.S. channels, srinking of fair hardness, Non

oxidzing, Non metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 500 g./Sq.M. with 10 mm x 10 mm size

groove cutting in concrete as constructution joint and 12 mm

thick premix expansion joint at every 20 Meter lengthwith

necessary equipments, labors as per design etc. Complete. 355.00 Smt. 665.00

18 Providing TMT Bars confirming FE 500/500D for R.C.C. work

including bending, binding and placing in position complete

19 Providing TMT Bars confirming FE 500/500D for R.C.C. work

including bending, binding and placing in position complete

20 White stone bela masonry block in course in foundation and

upto plinth with stone of approved quality in cement mortar 1:6

(1cement : 6 course sand) including racking the joints etc.

complete. 130.00 Cmt. 5780.03

21 White stone bela masonry block in course in Super Structure

with stone of approved quality in cement mortar 1:6 (1cement :

6 course sand) including racking the joints etc. complete.for GF 117.00 Cmt. 6110.03

22 White stone bela masonry block in course in Super Structure

with stone of approved quality in cement mortar 1:6 (1cement :

6 course sand) including racking the joints etc. complete.for F.F 41.00 Cmt. 6146.13

23 White stone bela masonary in partition walls upto 15cm

thickness in cement mortar1:4 ( 1 cement : 4 Sand ) for all floor 48.00 Cmt. 645.90

24 Providing 15 mm. Thick cement plaster in single coat on both

sides Brick/concrete walls for interior plastering up to floor two

level and finished even and smooth in C.M.1:3. For GF 615.00 Smt. 184.28

25 Providing 15 mm. Thick cement plaster in single coat on both

sides Brick/concrete walls for interior plastering up to floor two

level and finished even and smooth in C.M.1:3 -. For FF 250.00 Smt. 206.81

26 Providing 10 mm. Thick cement plaster in single coat on fair

side Brick/concrete plastering on ceilings for interior plastering

upto floor two level and finished even and smooth in: and sofits

of stairs upto floor two level (I) Cement mortar 1:3 (1 cement :

sand) - GF 270.00 Smt. 161.91

27 Providing 10 mm. Thick cement plaster in single coat on fair

side Brick/concrete plastering on ceilings for interior plastering

upto floor two level and finis ,and sofits of stairs upto floor two

level (I) Cement mortar 1:3 (1 cement : 3 sand. - FOR FF 120.00 Smt. 182.55

28 20 mm. Thick sand faced cement plaster on walls up to height

10 meters above ground level consisting of 12 mm. Thick

backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm. Thick

finishing coat of C.M.. 1:1 (1 cement : 1 sand) etc. complete. 1025.00 Smt. 322.88

29 Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete 2100.00 Smt. 113.40

PARTCULARS OF ITEM QTY PER RATE AMOUNT

30 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undercoated wall surface to

givr an even shade including throughly brushing surface free

from mortar droppings and other foreign matter and sand

papered smooth -walls 865.00 Smt. 78.12

31 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undercoated wall surface to

givr an even shade including throughly brushing surface free

from mortar droppings and other foreign matter and sand

papered smooth -ceiling 390.00 Smt. 83.33

32 Applying Two coats of Birla(white cement based) or Asian

Acrylic Lappy (Putty) or equipment and two coats of primer of

approved brand and manufacture on New Wall surface to give

an even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered

smooth. 1255.00 Smt. 40.19

33 Applying One coat of exterior primer of approved brand and

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. 2100.00 Smt. 28.00

34 Providing cement vata 10 x10 cm size quarter round in cement

concrete in C.M. 1:1 including neat cement finishing watering

etc. complete. 25.00 Rmt. 23.45

35 Providing , Fixing & Fitting fully glazed, partly glazed

Single/Double leaf anodized /aluminum powder coted(of

approved shade) door using extruded section fabricated by

standard manufacturers with framing 63.50 x 38.10 having wt

1.094 Kg pre Rmt rectangular section & door shutter made

from with frame vertical size 44.45 x 47.62mm having wt

Kg per Rmt and horizontal size 63.50 x 38.10mm and bottom

rail size 101.60mm 44.45mm having wt 1.60 Kg/M using 5 mm

thick “TRIVENI” or HB4 plain/colour glass/4 Acrylic Sheets/

12 mm Board with glazing deep rubber gasket with locking

arrangement of GODREJ LOCK with all fixtures & fastening

of anodized section with aluminum beeding without floor

mounted door closer etc. completed.. Rates are with all labours

and material as per drawing and as directed. 10.00 Smt. 4116.00

36 Providing, & fixing hot pressed phenol bonded, exterior type

solid flush door 35mm shutter made by approved brand & as per

I.S.I. standard with water resisting plywood facing and 1mm

thick laminated sheet on both side of door & teak wood leaping

all-round including 100X75mm. teak wood frame.If necessary

with glass looking window with T.W. batten and polishing

/Colour .Rates are without fixtures & fastening but with 3 NO of

100mm. long butt or parliamentary hinges on each flap of

double shutter & 150mm. long hinges for single shutter and

NO of M.S. flat hold fast grouted in C.C. (1:2:4) on each side of

frame, 3 coats of oil painting of approved shades make etc.,

complete as per drawing & as directed by E.I.C. 16.00 Smt. 3346.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

37 Providing and fixing FRP frame 100X50 mm and 28 mm thick

FRP depressed pannel shutter having extra reinforcement on

sides and edges and in Gel coat finish.The core of the shutter is

to be filled up with injected fire retardent grade polyurethane

foam done in situ along with embaded wooden pieces for

stiffening and also for taking hinges and fixtures .The whole

FRP frame and shutter is to be water

proof,wheathereproof,termite proof and resistance to mild acid

/alkali .Rates are to be inclsive of S.S. hinges with necessary

screws and alluminium fixtures and fastenings. 23.50 Smt. 2354.22

38 Providing and fixing window having excruded alluminium

colour anodized section frame main size 63.50 x 38.10 x

1.95mm (of Jindal section no.4605,@Wt.1.094 Kg/Rmt)

horizontal two track member size 61.85mm x 31.75mm x

1.20mm (of Jindal Section No.8687 @ Wt. of

Kg/mt.),vertical member of size 61.85mm x 31.75mm x 1.30mm

(of Jindal Section No.8758 @ Wt. of 0.695 Kg/mt.) with sliding

shutter of horizontal member size 40mm x 18mm x 1.29mm( (of

Jindal Section No.8949 @ Wt. of 0.456 Kg/mt.),vertical

member of size 40mm x 18mm x 1.29mm ( (of Jindal Section

No.8947 @ Wt. of 0.695 Kg/mt/section [email protected] kg/mt.)

with 5mm thick transparent bronze colour tined float glass with

powder coated alluminium fitting and fixtures and transparent

silicon sealant glass fixing to frame as per details etc.complete

for window. 42.00 Smt. 1696.73

39 Providing and fixing standard excruded of alluminium section

of size 63.50mm x 38.10mm x 1.95mm ( Jindal Section :2434 @

Wt.0.643 Kg.per mt) with colour anodized alluminum frame for

ventilation with 5mm thick frosted glass as details etc.complete

for ventilation. 6.00 Smt. 1288.93

40 Providing &fixing in position fully glazed alluminium frame

partition if necessary with door arrangement of approved size

allu. section with rubber packing using alluminium coloured

powder coated rectangle section in 63X38 mm vertical &

horizonal to be used for top all intermediate bottom & side ends

panels.Pannels is to be prepared from 5 mm thick Modiguard or

equivalent approved standard quality coloured/plain glass with

glazing clip rubber gasket with aluminium bedding of required

size, All glazing should be designed with decorative film if

necessary.Scope includes all fixtures and fastening and screws

etc.completed as directed by EIC.Pennaling is to be done as

directed by EIC. 48.00 Smt. 2230.00

41 Providing and fixing rolling shutters for width below 3.5 M of

approved make made of 80 mm. Wide M.S. Laths inter-locked

together through their entire length and jointed together at the

end by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for in side and

out side locking with push-pull operation including the cost of

Hood cover and spring etc. complete. 7.00 Smt. 3468.72

42 Providing & fixing MS plain grills of required pattern to

wooden frames of windows and gap filling of wall etc. with MS

flats or M.S, pipes at required spacing and frame all- round

square or round bars with round headed bolts and nuts or by

screws/ welding.etc. complete as directed by EIC. If required

door arrangements with hinges and locking and door stay

arrangements is to be provided.Payment will be made in

KG.Rate includes 1 coat of red oxide and 2 coats of oil paint 1990.00 KG 106.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

43 Providing and fixing to wall, ceiling and floor galvanised mild

steel tubes (Medium grade) of the following nominal bore, tube,

fittings and clamps included making good the wall, ceiling and

floor (F) 50 mm 73.00 Rmt. 779.60

44 Labor charges for Fabrication of Support structure for,framed

work including with cutting Welding as director by EIC,

Including Oil painting & All miscellaneous items like bolt, nut,

welding rod etc. All required main structural (Girders, Channels

, Angle , Flat & Round Bars) material will be provide by

45 Providing and laying 24''x24'' Vitrified 8 mm thick tiles in

flooring & skirting over 20 mm base of cement mortar 1:6 on

new surface or fixing on existing flooring by adhesive material

including dismentalling of existing flooring and jointed with

colour cement slurry incl. finished with flush pointing and

cleaning the surface etc. complete for Light shade using

coloured cement.or anti skid as directed by EIC 266.00 Smt. 1192.28

46 Providing and Laying coloured digital glazed tiles of size

flooring,skirting, risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-sand) & jointed with white cement 176.00 Smt. 1403.33

47 Providing and laying 25 mm thick polished kotah stone slab

Flooring as per design over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand ) or LM 1:1:5 laid

over and jointed with grey /coloured cement Slurry including

rubbing and mirror polishing etc. Complete - 25 mm thick FOR

FLOORING 44.00 Smt. 962.33

48 Providing & laying 20 to 25mm thick, both faces polished

kotah stone with all edges machine cut up to 450/600mm

width and of required length (only one piece to be used ) of

approved quality for cupboard shelves including fixing the same

in masonry wall by cement mortarin three sides including

curing etc. complete as directed by EIC.. 93.00 Smt. 953.00

49 Providing and laying 25 mm thick granite slab(18mm thick)

flooring over 20 mm. (average thick base of cement mortar 1:6

(1 cement : 6 coarse sand ) of L.M. 1:1.5 and laid over and

jointed with grey cement slurry or fixing in sill/jamb jointed

with cement/bonding chemical including rubbing and polishing

complete as directed by EIC.. 0.70 Smt. 2981.00

50 Providing and laying 20 mm (Average)thick Marble stone

/jesalmer stone as a design in kotah stone flooring and laying at

sill level over 20 mm. (average thick base of cement mortar 1:6

(1 cement : 6 coarse sand ) of L.M. 1:1.5 and laid over and

jointed with grey cement slurry or fixing in sill/jamb joitned

with cement/bonding chemical including rubbing and polishing

complete as directed by EIC.. 105.00 Smt. 2104.20

51 Providing, laying and jointing in true line and level UPVC Pipe

(SCH-40) for cold water including fittings as approved by

Engineer in charge.Pipe shall be fixed on the wall with the help

of clamp at every two Metre C/C or shall be concealed as

directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent incl cost of

all materials.15mm Dia. 43.00 Rmt. 71.93

52 As per above item but-25mm Dia. 43.00 Rmt. 90.93

53 As per above item but-40 mm Dia. 30.00 Rmt. 146.65

54 As per above item but-50 mm Dia. 100.00 Rmt. 193.93

PARTCULARS OF ITEM QTY PER RATE AMOUNT

55 Providing erecting and fixing double coated Syntex PVC (ISI)

water tank of required capacity each with all necessary fittings

and connection etc complete on terrece. 2000.00 ltr 3.91

56 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2

working pressure polythelene pipes of the following outside dia.

Low density, complete with special flange compression type

fittings wall clipsetc including making good the wall, ceiling and

floor (F) 75 mm. ---(if pipe laid in trenches excavation and

earth work will be paid separately.). 10.00 Rmt. 169.00

57 As per above item but- 90mm dia PVC rigid 10 Kg.F /cm2

pipe(if pipe laid in trenches excavation and earth work will be

paid separately.). 20.00 Rmt. 220.00

58 As per above item but- 110 mm dia PVC rigid 10 Kg.F /cm2

pipe((if pipe laid in trenches excavation and earth work will be

paid separately.). 30.00 Rmt. 332.91

59 As per above item but- 160 mm dia PVC rigid 10 Kg.F /cm2

pipe. Pipe to be laid in trenches . (if pipe laid in trenches

excavation and earth work will be paid separately.). 40.00 Rmt. 543.00

60 Providing and fixing water closet squatting orrissa pan (India

type W.C. Pan) size 580 mm integral footrest and 100 mm P or

S trap and including 25 mm dia. C.P. brass flush valve and G.I.

inlet connection etc. comp. - vitreous china long pattern white or

colour (Bed concrete and earth work will be measured and paid

seperately) 1.00 No. 1642.27

61 Providing and fixing wash down closet (European W.C. Pan)

with integral "P" or "S" trap and PVC flushing tank cistern with

fittings and incl. plastic seat and cover with brass hinges and

rubber buffersand PVC connector , nozzle etc. including

jointing trap with pipe in C.M. 1:1and PVC tank with float valve

etc.connecting cistern with closet etc., comp.in working

condition-Vitreous in colour. 4.00 No. 3419.25

62 Providing and fixing urinal of approved quality including

connection with waste pipe, trap and with integral longitudinal

flush pipe etc. complete. (A) Squating plate pattern

White/Colour earthen ware of size-550mm x 300mm. 4.00 No. 1538.78

63 Providing and fixing wash basin with single hole for pillar tap

with with vertical pedestal including 15mmC.P. brass quarter

turn pillar tap, capstan head screw down high pressure with

screws, shanks and back nutswith C.I. or M.S. Brackets painted

white paint including cutting holes and making good the same

including C.P. brass waste and waste Pipes 32mm dia - vitreous

china.-Flat back wash basin with vertical pedestal 550 x

mm. Size - in colour. 4.00 No. 1683.96

64 Providing & Fixing 150X100mm stone ware gully trap with CI

grating. B.B. Masonry in C.M.(1:6) chamber including

B.B.C.C.(1:4:8)150mm. thick bed concrete, with water tight

C.I. Cover with frame of 300 X300 mm with plastering the

chamber with curing etc., complete as directed 4.00 No. 1234.57

65 Providing and fixing screw down quarter turn bib taps of

following size -Brass cromium plated screw down bib tap -15

66 Providing & fixing C.P. brass scew down stopcock of approved

quality 15mm size 15.00 No. 203.79

67 Providing and fixing ISI quality heavy gum metal check or non

return valve full way wheel valve - 20mm. 4.00 No. 201.80

68 Providing and fixing ISI quality heavy gum metal check or non

return valve full way wheel valve - 25MM diameter. 4.00 No. 416.47

PARTCULARS OF ITEM QTY PER RATE AMOUNT

69 Providing and fixing ISI quality heavy gum metal check or non

return valve full way wheel valve - 40MM diameter. 4.00 No. 656.86

70 Providing & fixing Cast iron (spun /pvc) nahni trap of the

following nominal dia. of self cleaning design with C.I/PVC

screwed down or hinged grating and S.S. jali including cost of

cutting & making good the walls & floor 75 mm inlet & 50 mm

outlet. 7.00 No. 600.08

71 Providing B.B Masonry inspection chamber (MANHOLE) of

approved size including light type approved C.I. Cover with

frame, necessary excavation, bottom concreting of B.B

CC(1:4:8) 150mm thick/225mm thick B.B Masonry in C.M(1:6)

12mm thick cement plaster in CM(1:3) inside & to all exposed

faces up to 300mm below ground level, curing etc. including

disposal of surplus excavated earth up to radius of 500mt.

Including 3 coats of white or colour wash to all exposed

finished surface etc. complete as directed by E.I.C.-600x450mm

clear size 5.00 EACH 6923.00

72 Providing B.B Masonry inspection chamber (MANHOLE) of

approved size including light type approved C.I. Cover with

frame, necessary excavation, bottom concreting of B.B

CC(1:4:8) 150mm thick/225mm thick B.B Masonry in C.M(1:6)

12mm thick cement plaster in CM(1:3) inside & to all exposed

faces up to 300mm below ground level, curing etc. including

disposal of surplus excavated earth up to radius of 500mt.

Including 3 coats of white or colour wash to all exposed

finished surface etc. complete as directed by E.I.C.-300x300mm

clear size 4.00 No. 5978.00

73 Providing and fixing 600 x 450mm bevelled edge mirror of

superior glass mounted on 6 mm thick A.C. Sheet or plywood

sheet or PVC framing and fixed to wooden plugs with C.P. brass

screw and washers. 4.00 No. 825.48

74 Providing and fixing Stainless Steel railing having 75 mm dia,

hollow stailess steel pipe hand rail and 40 mm dia. Hollow

stainless steel pipe with combination of 10 cm long 20 mm dia

pipe as vertical support with 20 mm dia hollow pipes 3 rows as

intermidiate members running throughout with steel bol as cap

at each end including cutting, bending, welding & fabrication

the structure as per drawing in 404 grade of steel etc. completed

as per instruction. 14.00 Smt. 2730.00

75 Providing & fixing single layer waterprrof gypusm board

mm thick of the make Newgood Group Co Ltd or equipment &

Newgood Group Ltd company sections using waterprof board of

size 1220mm x 1830mm with intermidiate channel of size

18mm x40mm x 0.80mm at 1220 mm centre to centre ceiling

section of size 40mm x 35mm x 0.55 mm at 457mm centre to

centre A of size 20mm at edges & drops including paper tap

sand soft cleat anchor fastener scooch bolt connecting cleat

joining compound top coat on ceiling including making

necessary opening for light fitting diffuser etc complete as per

detail drawing as directed. 18.00 Smt. 600.94

76 Providing fixing Hydraulic Door closer and of ISI approved

brand as directed. 6.00 No. 925.00

77 P/F brass towel rail complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws.-600 X20 mm size. 5.00 No. 597.22

PARTCULARS OF ITEM QTY PER RATE AMOUNT

78 Provinding and laying broken China moasaic Floorig for

Terrace using 12mm to 20mm brokan pieces of glazed tiles to be

over cement mortar 1:3 to plain or slope and to be tempered to

bring moetar crème out upto surface using white cement

including rounding off junctions and extending them up to

15cm. along the wall, clearing with water and oxalic acid etc as 276.00 Smt. 739.89

79 Supply & fixing to doors & windows, ventilators, cup boards

following fixtures & fastenings of approved quality with

wooden or metal or brass screws, nuts & bolts as directed or as

per the drawing & specifications etc., complete as directed by

E.I.C. Flat latch (Brass) 300 mm long. 14.00 No. 143.00

80 As per above but Handle (Brass) 150 mm long. 28.00 No. 67.60

81 As per above but Door stopper 150 mm long (Brass). 14.00 No. 90.00

82 As per above but Tower Bolt 150 mm long (Brass) 14.00 No. 90.00

83 As per above but MS best chromium plated aldrop 16 mm dia &

84 As per above but Aldrop 300 mm long &16 mm Dia.(Brass) 14.00 No. 377.00

85 Providing 2500mm internal diameter & 3.0 Mt. Deep soak pit

including excavation in all types of soil & soft rock & B.B

CC(1:4:8) bedding, 300mm thick below masonry and 450mm

thick B.B Masonry in CM(1:6) up to 600mm height, 350mm

thick for further 600mm and 230mm thick for remaining height

honey combed, plastering in CM(1:3) outside up to 1.5 Mt

height and 100mm thick RCC slab with 600x600mm C.I.

HEAVY duty cover with frame, with necessary reinforcement as

per design & C.I Vent pipe 1800mm long with B.B masonry

pillar 350x350x450 plastered all around filling with 40 to 50mm

size brick bats up to 1.5 Mt depth, including 16mm dia M.S’U’

shape steps, refilling including disposal of the surplus excavated

earth up to the lead of 500mt. Radius including 3 coats of white

or colour wash to all exposed finished surface etc. complete as

directed by E.I.C. 1.00 No. 50472.36

86 Providing & Fixing light type C.I. Manhole covers with water

tight C.I. Frame & fixing the same in concrete etc., complete as

directed by E.I.C. Size 600 X450 mm 5.00 No. 948.68

87 Providing and fixing cromium plated liquid soap container with

screws etc. complete. 3.00 No. 150.00

88 Providing Quarter Nosing to edge of marble/Kotah stone etc.,

complete as directed by E.I.C. 320.00 Rmt. 39.10

89 Drilling of bore well of 165mm.dia. by machine in all kinds of

soil, sand, clay, murrum, soft rock and hard murrum, etc.,

complete, truly vertical with all equipments and labours etc.,

complete as directed by E.I.C. 200.00 Rmt. 250.00

90 Providing, fixing & lowering heavy duty 6KG / CM2 P.V.C.

casing pipe suitable for 165 mm dia bore well including

necessary coupling connector, solution etc. complete as directed

91 Supplying and lowering 3 H.P. submersible pump of approved

brand with ISI mark including lowering vertically, fitting with

HDPE pipe and top clamp and connecting cable with motor as

directed incl. all necessary accessories and commisioning etc

completed.. 1.00 No. 14000.00

92 Providing and fittings of standard switch board with ampere and

volt meter and wooden covered box with locking arrangements

and fiting on wall as directed. 1.00 No. 1250.00

93 Providing and fixing of cable three core copper ISI approved

make.-4mm 250.00 Rmt. 55.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

94 Providing and fixing best quality of H.D.P.E. pipe of approved

ISS quality with all accessories fittings, jointing etc., suitable

for submercible pump lowering in bore etc., complete as

directed by E.I.C.- 32 mm dia. Outer 10 Kg./Cm2 200.00 Rmt. 69.00

95 Providing and fixing top cap for 150 mm dia pipe clamps,

socket and other accessories required for completing the job as

directed by EIC 1.00 No. 662.00

96 Providing and fixing 300 x 300 mm size marble/granite in black

colour year plate with golden colour letter including fixing the

same in C.M. etc., complete. 1.00 No. 300.00

97 Providing & fixing of wall cupboard shutters using 18MM

plywood with Wood Framing size of 25 x 35 mm, decorative

laminate of approved shade & brand on front side and backside

with white laminated sheet. Including finishing with beading

patti and polishing the same. Fixing of door with hinges, one

number of magnet and door handle on each door and one

number of door lock and stopper for locking arrangement good

quality etc. Complete including materials and labour as direction

of Engineer in charge. 86.00 Smt. 5320.00

98 Providing & Fixing Pre-Cast Rubber Dye Interlocking concrete

Blocks 60mm thick with grade of concrete M-200 pnumatic

compressed by mechanically pressed and as per approved design

including 75mm sand layer for levelling and filling the joint

with sand in proper linr and level etc. complete of approved

manufacture as per the direction of Engineer-in-charge. 1170.00 Smt. 603.00

99 Providing corrugated G.I. Sheets Class-3 roofing fixed with

Galvanied iron 'J' or 'L' hooks bolts and nuts 8 mm. diameter

with bitumen and G.I.L impet washers filled with white lead

complete excluding the cost of purlins, raffers and trusses. (I)

0.50 mm. Thick sheet 235.00 Smt. 656.00

100 Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick

of M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint

with C:M 1:3 (1cement:3fine sand) etc complete. 182.00 Rmt. 379.58

101 Uncoarsed Rubble Masonary with hard stone of approved

quality in foundation and plinth in Cement Mortar 1:6 (1-

Cement, 6-Coarse sand) including levelling up etc. complete. 90.00 Cmt. 2475.26

102 Supplying of graded stone aggregate of followings sized Hand

broken stone aggregate 40mm to 63mm size. 250.00 Cmt. 289.28

103 Spreading stone aggregate for rolling and WBM including

filling the interstices to required chamber and gradient as

directed by EIC- 40 to 63mm size 170.00 Cmt. 247.28

104 Providing and fixing 12 mm toughened glass door fixing with

Ozone make or equivalent floor spring, SS door handle, lock as

per approved design, door edge molding etc. Complete with

applying designer black out film on door with all required

accessories, labour and transportation complete as directed by

engineer in charge. 11.00 Smt. 6887.00

105 Supplying and installation of 12mm thick frameless toughened

clear glass and all glass edges machine polished, Glass to be

make of Saint Gobain India or equivalent and glass will be fix

with the alluminium U-Channel 27mm X 18mm X 1.5mm thick

entire outer surface and all glass grooves will be filled with the

789 clear weather silicon with all hardware and accessories as

per architechtural drawings detail etc. complete as directed by

Engineer Incharge. 13.00 Smt. 4285.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

106 Providing and fixing Stainless Steel text i.e. "પિ મ જ ુ રાત

િવજ કંપની લીમીટડ" in 15" text, "િવભાગીય કચેર તથા શહર

પેટા િવભાગીય કચેર વેરાવળ." and "PGVCL" In 12" text in

approved steel grade SS 304, including all fastners and fixtures

at give location as directed by EIC. 10.00 Sqft 1058.00

107 Demolition of brick work and stone masonry/Bella masonary

including stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift (ii) In cement

mortar. 178.23 Cmt. 530.78

108 Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift - CC or

R.C.C. work 115.00 Cmt. 1020.66

109 Dismentalling tiles or stone floors laid in mortar including

stacking of serviceable materials and disposal of

underserviceable materials with all lead and lift. 426.00 Smt. 46.31

110 Dismentalling doors, windows, ventilators, etc. (Wood or steel

shutters including chowkhars, Architraves, Holdfasts and other

attachment etc. complete and stacking them within all lead and

lift. 1. Not exceeding 3 Sq.M. in area 45.00 No. 181.13

Estimated Cost Section-I (CIVIL WORKS) in Rs.

111 Point wiring for light/fan/bell/primary point with 2-1.0 sqmm &

earthwire of 1.0 sqmm (green) both are of ISI marked FR PVC

insulated multistand copper wire in existing PVC pipe duly

erected complete with 6 A tissino type ISI marked flush type

switch/bell push and accesories erected on polished wooden

block/Metal / PVC box coveredd with 3 mm thick laminated

sheet. As per concealed wiring standards. Wire make:

Bentex/Polycab 180.00 No 412.00

112 Point wiring for independent PLUG with 2-1.0 sqmm &

earthwire of 1.0 sqmm (green) both are of ISI marked FR PVC

insulated multistand copper wire in existing PVC pipe duly

erected complete with 6 A tissino type ISI marked flush type

switch/bel;l push and accesories erected on polished wooden

block/Metal / PVC box coveredd with 3 mm thick laminated

sheet. As per concealed wiring standards. Wire make:

Bentex/Polycab 45.00 No 380.00

113 Providing and erecting 1.5 mm thick FIA approved and ISI mark

(embossed) RIGID PVC PIPE of following size, complete

erected with necessary PVC fitting & Junction boxes fixed with

adhesive solution & clamps with following type of size. SIZE

= 20 mm Diameter 10.00 Mtr 177.00

114 Providing and erecting following shockproof tissino type

accessories erected on 3 mm thick laminated sheet in

wooden/PVC/Metal. Erected on wall / ceiling . One no single

pole 16 A switch & one no 6/16 A universal socket combined. 15.00 No 125.00

115 Providing and erecting following shockproof tissino type

accessories erected on 3 mm thick laminated sheet in

wooden/PVC/Metal. Erected on wall / ceiling . Backlite lamp

holder - universal socket combined. 25.00 No 125.00

116 Providing and erecting switch board for computer, electrical

appratus consisting of following items. Single board erected on

wooden /PVC/ Metal board with 3 mm thick laminated sheet

erected as directed. 1 no 6A/16 A universal plug swith

combined with fuse & indicator. 4 no of 6 A tissino switch, 4 no

6 A tissino 5 pin plug. 30.00 No. 523.00

117 Call bell/buzzer, 250 Volts, complete erected on existing

polished wooden block or 3 mm thick laminated sheet 2.00 No. 350.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

118 Approved make CFL Lamp retrofit 13/15/18 Watt cat III 10.00 No. 210.00

119 Providing Approved make trippele pole cast iron clad switch &

rewirable fuse with neutral link 415/500 V confirming to

I.S.S.(b) 32A Cat.III 10.00 No. 960.00

120 Miniature circuit breaker single pole 6A to 32A suitable to

operate on 240 V AC system and having overload and short

circuit tripping elements and breaking capacity 10 KA to be

erected in existing M.S. Box confirming to IS 8828/1996 with

ISI mark (A) 6 to 32 Amp Cat III, Make: L&T 3.00 No. 110.00

121 Providing & erecting 240 V MCB double pole switch for motor

& inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat III, Make : L&T 3.00 No. 478.00

122 Providing & erecting 415 V MCB four pole switch for lighting

load (B curve) having 10KA breaking capacity & confirms to IS

: 8828 in existing box having following capacity (A) 6 to

Amp. Cat. III, Make: L&T 3.00 No. 650.00

123 Providing and erecting double pole MCB isolator AC 22 duty

confirms to IS 13947-3 240 V 40 A in existing metal clad MCB

distribution board. (A) 6 to 32 Amp. Cat III, Make: L&T 8.00 No. 450.00

124 Approved make ELCBs / RCCBs confirming to IS :12640 and

having sensitivity of 30 mA and Short circuit withstand capacity

of 6 KA and suitable for operation on single phase 240 V

having charectorstic of quick action & tripping with all advance

feature & not incorporate any electronic component for

following Max. rating. Make: L&T 1.00 No 2125.00

125 Supplying of power saving ceiling fan, 50 watt with condensor

230 Volt, 50 cycle, 1200 MM sweep complete having 3 blades

with canopy & 30 cm down rod erected with 24/0.2 falt 3 core

flexible wire with earthing with resistance regulator. Make:

Crompton greaves 20.00 No 1750.00

126 supplying and providing fan hook box of 10 mm round bar

bounded to the RCC bars up to 50 mm length each side and

pierced through a 16 guage MS Box/ Heavy duty PVC box

having depth of 75 mm complete concealed in ceiling with

necessary finishing. 15.00 No 110.00

127 Providing 2.5 mm thick laminated sheet to cover the fan hook or

fan box 15.00 No 50.00

128 Earthing Electrode with ISO Quality certification, dule pipe with

flat technology consist of 3 Mtr long, 76-80 mm Outer dia. Pipe,

3mm thick and 37-40 mm inner dia. pipe -2mm thick having

terminal flat of 12mm.The entire construction processed with

hot dip galvanization, outer surface up to 100 micron and all

inner surfaces 200 to 300 micron. All inner annular space filled

with highly conductive and corrosive nature crystalline material

along with backfilling compound of 2 X 25 kg bags to fill

surround the electrode at the time of installation. Earthing

backfilling compound must have properties of moisture

retention, conducting and non corrosive nature. Necessary

boring and digging at site is to be carried out by the agency. 2.00 No 6000.00

129 Provind and erecting of TFT tube light, 20 watt, Make: Philips

with all acessories 30.00 No 475.00

130 Provind and erecting of LED lights in DE's chamber, Make:

Philips with all acessories 6.00 No 180.00

131 Providing and ercting of CAT-6 cable for LAN for each

computer as directed by Deputy Engineer (Maliya) with all

accessories by push pull method. Make of cable: D-Link 250.00 Mtr 50.00

PARTCULARS OF ITEM QTY PER RATE AMOUNT

132 Providing & fixing of LED fixture, 50 watt, for office lighting

as directed by Deputy Engineer - Maliya Make: Philips 6.00 No 5500.00

133 Providing and erecting of Exhaust fan, 12 MM , Make :

Compton graves Ltd 4.00 No 1450.00

134 Providing and erecting of Ditribution box (fuse box) with

MCCB-ELCB for distributing power. Make: L&T 1.00 No 2256.00

135 Providing and ercting of CAT-6 cable for LAN for each CCTV

camerra as directed by Deputy Engineer (Maliya) with all

accessories by push pull method. Make of cable: D-Link 150.00 Mtr 45.00

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section [ I +II ] in Rs …

136 Amount from Sale of IMLO by Dismentalling existing old

Shapur sdn office building at shapur and carrying away all

material received from dismentalling. Party has to lift all

dismentall serviable and un serviceable material from site and

making site clear in all respect. All lead and lift is in scope of

party. Rates includes all risk of accident. No any property/live

stock /human being of private as well as of PGVCL shoud be

damged during execution of work. All responsibility shoul be of

contractor. For sale of this old property material, party has to

mentioned rate which will be deducted from bill of party. Rate

quoted for whole tender will be effected to this item also, in

reverse trend. (Note: Imlo quantity is considered according to

itemwise measurement Dismantling Item Quantity, after

execution of work, the actual quantity will be measured; the

effect of the same will be given in this item and final payment

will be made as per actual quantity.)

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

TOTAL AMOUNT TO BE CREDITED TO PGVCL in Rs …

Estimated cost of work for Civil Work & Electrical Work

Bidder's Offer (B)

Bidder's Quoated Amt. (C ) i.e. [C= (A) +/- (A)*(B)]

GST @ [CGST @ __% + SGST @ __%] (D = C*__%)

Bidder's Total Quoated Amt. with GST (E) (E = C+D)

Rebate charges to be paid to PGVCL Sale of IMLO by Dismentalling existing Sdn office

Bidder's Offer (G)

Bidder's Quoated Amt. [ H = (F) +/- (F)*(G)]

GST @ [CGST @ __% + SGST @ __%] (I) (I=H*__%)

Bidder's Quoated Amt. with GST (J) (J = H + I)

Bidder's Total Quoated Amt. with GST & TCS for Demolition work (L = J + K)

Bidder's Net Quoated Amt. (M) i.e. (M = E - L)

(Note : Prices will be evaluated i.e. L-1, on Bidder's Net Quoated Lowest Amt. i.e. on "M" Amt.).

Chief Engineer(Material)

PGVCL, Corporate Office