SITC of submersible pump set with complete

Amount

S/I/T/C vertical submersible pump set 5 Hp, 25 stage, 3 phase, with stainless steel impeller, shaft and body , Head range 64-220 mtr, discharge 100 ltr/min - 125 ltr/min at 145mtr -120 mtr, outlet dia 50mm , DOL starting, radial flow as per deccan ekki ( Model no. ER605C) or kirloskar, texmo , KSB,CRI or equivalent) upto a depth of 130 mtr into 150mm dia bore with the help of UPVC column pipes and safety ropes and submersible cables complete with connections etc as required

S/F 50mm UPVC Column Pipe,heavy duty (Safe Allowable hydrostatic pressure (kgf/cm2)-27),ultimate breaking load(kg)-5000,safe pulling load with chain pully(kg)-3030, each of 3 meter length,High tensile Strength and Durability,Leak-Proof Jointing,Chemical Resistance,Non-Conductive,Double SS stud pin locking system,Longevity of Life Cycle,Lead-free and Heavy Metal Free UPVC for 100% Hygenic / safe for drinking water,Threads– for additional strength against tensile load,corrosion resistance (MAKE- ASTRAL,finolex,ashirvad or equivalent)complete with socket , in the delivery line of the submersible pump set i/c cutting , threading etc as required.50MM

S/F Borewell cap 150mm (6") dia x 50 mm (2") on the existing 150mm bore made of 14 SWG MS sheet and necessary holding nuts, painting etc as required

S/F heavy duty rest clamp over 150mm dia bore cap for securing 50 mm UPVC column pipe and submersible pumpset as required

Supplying / laying and fixing of one No. PVC insulated and PVC sheathed flat submersible cable copper conductor of 1100 V grade, ISI marked, 3-core 4.0 sqmm in pipe/surface/alongwith column pipe complete with jointing,connections etc as required. (Havells/Polycab/Finolex/RR)

Supplying & Fixing of 20 MM Plastic PP Safety Rope , Breaking Strength (Kgf) - 7891 (Make-GAREWARE),Higher breaking strength ,Unaffected from chemicals & sline water,excellent abrasion resistance,UV resistance

Supplying & Fixing of 50 MM Bend.

Supplying & Fixing of 50 MM SS Column Adapter(MAKE - ASTRAL ,finolax,ashirvad or equivalent))

Fabrication/Supplying/testing and commissioning of outdoor free standing type feedar box of size 0.91 x 0.60 x 0.45 Mtr deep fabricated out of 2.0mm (14SWG) CRCA sheet with intermediate members of same material and gauge as required. The box should be supported by 450mm long legs and frame made of 40mm x 40mm x 5mm thick MS angle iron at the base and should have almirah type single leaf hinged door at front with locking arrangement ,bolted type cover plate at back, gland plate at the bottom , water drip roofing arrangement at the top, air ventilation grooves at sides, dust and vermin proof design , earthing studs ,danger notice plate, duly powder painted and wired as required as per design and erection in suitable masonary foundation and including providing and fixing following switch gears/accessories (01) MCCB , fixed thermal and magnetic, FP, 40 AMP, 415 V, 10kA , Ics =Icu - 01 No. ( Havells/Standard/L&T/Indo - asian/Schnider) (ii) Copper bus bar - 100 amp ,4strips (iii) 03 Nos 40 Amps DP MCB isolator(iv) Holder-01 No. for interior light arrangement (iv) DOL controller with SPP for 5 HP 3 phase submersible pump set-01 No.( L&T MU-G10DOL/Havells) as per direction of engineer in charge

Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. strip.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I wire in 15 mm dai G.I pipe from earth electrode including connection with G.I . Thimble excavation and re- filling as required.

Supply and laying of 25 Sqmm 3.5 Core UG Aluminium Armoured cable,Material of conductor -Aluminium,Voltage range - 1.1kv,Wheather proof, Normal Current Rating (A) - 76 Amp, Approx. Reactance at 50Hz Ohms/Km -0.08, Max. AC Resistance ohm At 70 °C-1.44 Ohm/km ,Shape of Conductor- Stranded Compacted Shaped,Insulation Material- Insulation Material: XLPE,PVC Type-A OR HR PVC Type-C as per IS 5831(MAKE - CRI/POLYCAB/HAVELLS)

Supply and making end termination with brass comression gland and aluminium lugs for size 3 1/2 X 25 of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

One Dial Facility Management services

MANUCREATIONS