KNMT 2023-24 Belur Town Panchayat Salem DT Supply of LCV

Amount

Displacement (CC)/Engine apacity 700 CC-1250 CC,Max Power :20-30BHP @ 2500rpm and above,Max Torque :500NM @ 2000 rpm and above,Type of fuel:Diesel,Load Capacity :2 cu.m ,Vehicle emission Norms:BS-VI,No of cylinder in engine :2-4 cylinder ,Length of chassis :3800 mm - 3950 mm,Width of chassis :1500 mm-1550 mm & Ground clearance.150mm-165mm ,Fuel tank capacity :Diesel-30 ltrs to 40 ltrs & CNG-12-25kg ,Size of Tyre's & No's :145 R &12-5 Nos ,Wheel base : 1900 mm - 2250 mm ,Gross vehicle weight :1550 kg - 1900 kg,Clutch :Single plate dry friction diaphragm ,Transmission System :Manual ,No of speed-forward gears : 4 Nos Speeds(4F+1R),Type of steering :Manual / Power ,Speed Governors :Shall be Fitted ,Pay Load:800Kg to 1000Kg,Tipper body length :2100 mm - 2200 mm, Mild steel,Tipper body width :1400 mm - 1500 mm & Mild Steel ,Tipper body Height:750 mm - 950 mm & Mild Steel,Side portion (LH & RH) & rear doors Sheet thickness :2 mm & Mild Steel,Tipper Body top sheet including frame sheet thickness :1.6 mm & Mild Steel,Tipper Body Top Lid Sheet thickness :1.2mm & Mild Steel,Tipper Container:Tipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition should be provided on the middle of container along the vertical lenth of the body,Tipper Body Top Lid main Sheet thickness :75 x 40 x 6 mm,Hydraulic cylinder make :Reputed Make,Hydraulic system driven :Main Engine,Pump Make :As per IS standard ,Painting :Should be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatherizing and breakage.