SPECIAL REPAIR OF BLDG NO NP-11, NP-12 AND NP-14 AT BINNAGURI AND PROVN OF SEWAGE LINE BEHIND BLDG NO P-36 (OTM ACCN) CONNECTING TO MAIN SEWAGE LINE OF CERTAIN MIL STN UNDER GE (S) BINNAGURI

Amount

Dismantling of Plain or corrugated asbestos sheets in roof coverings complete all as specified and removal off the site.

Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa as in roof covering fixed with self drilling screws with EPDM washer etc complete all as specified.

---Ditto-- all as per item No 2.00 above but for as in eaves board fixed with selp tapping screw complete all as specified .

Dismantling floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises complete all as specified all as specified and removal off the site.

M&L for coloured Non skid joint free ceramic tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified . .

M&L for coloured Non skid joint free ceramic tiles (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match with the shade of tile including 15 mm thick screed bed in cement mortar 1:6 complete all as specified . .

M&L for glazed coloured ceramic tiles (350x450x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) complete all as specified .

Taking down chowkat with shutter exc. 1.5sqm and n.exc 4sqm each complete all as specified all as specified and removal off the site.

Ditto as item no 8 but not exceeding 1.5 Sqm each complete all as specified .

S&F Pressed steel door frames of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified .

S&F for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified .

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified .

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified .

S&F 100 mm size mild steel butt hinges medium weight complete all as specified .

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified .

M&L for 150 mm size aluminium anodised cast type handles complete all as specified .

S&F Aluminium anodized barrel tower bolts, extruded section 200 mm long complete all as specified .

S&F in repairs powder coated aluminium sliding window sliding on 2 track including 5mm thick plain sheet glass , handle 100mm, frame of section 50mm X 26 mm X 1.2mm and of shutter of section 40mmX 18mm X 1.55mm complete all as specified .

Taking down of cement plaster on brick (or) concrete wall including racking out joints hakins for key sinebling down with water etc complete all as specified .

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified .

M&L rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: WPC shall be measured and paid for separately as 'Supply only'.

Supply only liquid water proofing compound (WPC) of best quality complete all as specified .

M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade for New work Two or more coats applied over and including priming one coat of exterior primer applied complete all as specified .

M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shaded doe old surfaces Two or more coats applied over and including priming coat of exterior primer applied complete all as specified .

M&L preparation and complete removal of existing treatment of old plaster surface and applying three coats of white wash on ceiling complete all as specified .

M&L for prepartion of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying wall putty 1.00 mm average thickness each to wall surface complete all as specified .

M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying wall putty 1.00 mm thich average thickness to wall surface complete all as specified .

Dismantling wrought iron or mild steel work of any description as in door, gates , truss etc and similar works complete all as directed.

S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted.or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar complete all as specified .

Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified .

Demolition of cement concrete(un-Reinforced) of any description in any position not otherwise specifically provided for complete all as specified .

M&L for 75mm thick PCC type C-2 (1:3:6) using 40 mm graded agg in plinth protection path/hardstanding finished cement concrete surfaces fair and even all as complete all as specified .

Taking up or down steel tubing and connections,15mm bore including cleaning for re-fixing or removal from site of work complete all as directed.

All as per item No. 36 above but 20mm bore complete all as specified .

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified .

All as per item no 38 above but 20 mm bore pipe complete all as specified .

Supply and fixing in repair for vitreous China (white) wash down water closet pan (pedestal pattern) of size 935 x 425 x 780mm with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, PVC seat cover (white) with SS fittings and making all necessary connections complete as specified. Make: Hindware Cat No 20011 (Sleek) for water closet or equivalent.

S&F in repair for PVC 10 ltrs capacity valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC pipe 32 mm dia all as specified and directed.

Supply and fix in repair vitreous China wash basin white, flat back, size 580 x 460 mm with CP brackets (02 Nos), CP waste coupling full threaded 32mm dia, including cutting for pinning in ends of brackets and making good disturbed surfaces with CM (1:4) complete all as specified. Make:-(i) HINDWARE Cat No 10064 (Melisa) or equivalent.

Supply and fix vitreous China flat back urinals(white) of size 440mm x 315mm x 265mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including waste pipe, 15mm dia PVC connector pipe , CP urinal spreader complete all as specified. Make: Hindware Cat No 60001 or equivalent.

Supply and fix in repair PVC (SWR) pipes 110mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

Supply and fix in repair PVC (SWR) pipes 75mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

M&L for 110 mm bore PVC (SWR) vent cowl complete all as specified .

S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down ,screwed for iron pipe or brass ferule of 15mm bore complete all as specified .

S&F PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified .

Supply and fix as in repair for central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified. Make: Essco Cat No SQT 516A or equivalent.

S&F 15 mm dia PVC connection 450 mm long, complete all as specified

S&F in repair Ball brass valves high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified .

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer cylindrical vertical) LLDPE water storage tanks 1000 lit capacity ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet and over flow connection etc complete all as specified.

Supply & fix in repair angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified .

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples complete all as specified .

S&Fof 4mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified .

S&F in repair Steel ventilators fixed type, with glazing bars complete all as specified .

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and as dircted.

M & L for reinforce concrete 200mm dia pipe class NP-2 laid and jointed complete all as specified.

M&L for concrete bed in cement concrete 1:3:6 type C2 to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested complete all as specfied and directed.

S&F in salt-glazed stoneware gully traps, square or round mouthed, type 'P' fo size 180X150mm complete all as specfied and directed.

Cutting into existing man holes for connecting new drain of 200mm dia pipe and making good two pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified .

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded aggregate) as in coping of manholes channels etc complete all as specified .

Supply and fixing for mild steel TMT bars, 8mm dia, cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed)not less than 0.90 mm dia complete all as specified .

Material and labour for precast reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in cover slab and the like over 1.5m span etc and set in CM (1:4) including necessary formwork complete all as specified. Note:- Reinforcement shall be measured and paid for separately.

Material and labour for brick work with sub-class ‘B’ bricks, set in cement morter (1:4) straght or curved on plan, exceeding 6m mean redious as in manholes and septic tanks complete all as specified .

M&L for rendering 15mm thick in CM 1:3 as in fair faces of brick work or concrete surface of wall and finished surface even and fair without using extra cement with using wpc as per manufacturer instruction (measure seperately)complete all as specified .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified .

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly,

-----Contd Ser No 70 --- fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost, One light point controlled by one way switch 5/6 amps complete all as specified .

ALL as per item no. 70 but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified .

ALL as per item no. 70 but One socket out let 5/6 amps point on the same board complete all as specified .

ALL as per item no. 70 but One socket out let 5/6 amps point on the independent board complete all as specified .

All as per item No 70 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified .

S&F switch piano flush type 5/6 amps single pole one way complete all as specified .

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified .

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified .

S&F switch piano flush type 15/16 amps single pole one way complete all as specified .

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified .

S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified .

Fixing deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified .

S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up complete all as specified.

Refixing LED tube light fittings of any wattage, wall/ surface mounted, fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories and connecting up complete all as specified.

S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified .

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Tripple pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete includingfour pole MCCB 63 Amps with blanking plates as required and taking down the old one complete all as specified .

S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified .

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified .

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified .

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length complete all as specified .

M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified .

Taking down ceiling fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified .

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified .

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 25 sqmm 3.5 core with and including all fixing & connecting accessories such as Aluminium cable lugs, cable gland, nut, bolts, washer etc complete including taking out old unsv cable as specified .

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete all as specified .

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified .

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified .

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified .

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified .

M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified . Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified .

M/S VIRENDRA KUMAR SINGH (BID ID -3114396)

M/S NIKITA ENGINEERING CO (BID ID -3125117)

M/S East India Traders (BID ID -3116338)

M/S MOHAN KUMAR BANSAL (BID ID -3116336)

SS SHARMA (BID ID -3124786)

MESSRS SEN BROTHERS (BID ID -3116331)

SHRI R S YADAV (BID ID -3124809)

R K AGARWAL (BID ID -3125159)