DAY TO DAY REPAIR TO CERTAIN B/R WORK, AND PERIODICAL SERVICES AT MD ACCN, PAINTING, TILLING, JOINERY WORK AND SANITARY FITTINGS AT VIKRAM ENCLAVE, AZADHIND NAGAR, DHQ-8 AND JETTY AREA ALONGWITH MAINT OF ROAD FURNITURE AT HALDIA UNDER GE (I) (CGN) K

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each and refixing in the same opening complete all as specified and directed.

M&L for repairing of aluminium window, door of any description ( sliding /side hanging type) and replacing minor fitting such as lock, hinges, bottom roller 'H' type, glass, board, wire mesh etc. refixing the shutter in the same opening including necessary minor fitting complete all as specified and as directed.

M & L for easing adjusting of aluminum window both shutter and refitting of shutter section with screw including replacement of unserviceable locking arrengment ,stay hook and nessessary neoprene beading comp all as spd and as directed

M & L for easing adjusting of aluminum doors either or double both and refitting of shutter section with screw including replacement of unserviceable locking arrengment ,stay hook and nessessary neoprene beading comp all as spd and as directed

M&L for powder coated aluminium sections for side hung/sliding window/doors and partitions etc. with suitable sections for frame and shutter fixed with dash through holder fastener with length not less than 75mm to walls/floors including locking arrangement and rubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as directed.

S & F powder coated Anodised aluminium window and ventilator shutters,side hung/sliding type with styles,rails,sash bar,sliding frame etc all are made from aluminum anodise section weighing 0.55 kgs/m including necessary joining cleats ,glazing clips, rubber packing with locking system anodised aluminium snap beading screws all as spd

Providing and fixing factory made uPVC white colour Sliding window (area n exceeding 2sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F Powder Coating Anodised aluminium door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for aluminium sections for side hung/sliding window and partitions etc. with suitable sections for frame and shutter fixed with dash through holder fastener with length not less than 75mm to walls/floors including locking arrangement and rubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as directed.

S & F Anodised aluminium window and ventilator shutters,side hung/sliding type with styles,rails,sash bar,sliding frame etc all are made from aluminum anodise section weighing 0.55 kgs/m including necessary joining cleats ,glazing clips, rubber packing with locking system anodised aluminium snap beading screws all as spd

S&F anodised aluminium grill, 10mm thick, diamond shape with apareture 75mm fixed to windows including u type frame and nutcomplete all as specified and as directed.

S&F coloured sheet glass 5.50 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle exc 0.5 Sqm in each pan all as specified and as directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads all as directed.

M&L 5.5 mm thk froested Sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sq. m in each pane complete all as specified as directed

S&F sheet glass 4.0 mm thick ordinary quality and glazing with oil putty suare, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed.

M&L for Rim latch with two levers, of aluminium alloy body (75mm size) stove enamelled finish; with brass knob or lever handle and fixed complete all as specified as directed

S & F alloy wire cloth 0.45 mm nominal dia of wire and avg width of appreature 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F Stainless Steel butt hinges medium weight of size 75 mm complete all as specified and directed.

S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed .

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .

S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F for Floor door stopper 150mm of brass body and tongue with hard drawn steel spring aluminium alloy body with hard drawn steel spring, fixed in floor complete all as specified as directed.

S & F in repair Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed Aluminium (extruded section)body complete all as specified as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside cantt area.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces of wall in two coats, first coat 10 mm thick in cement mortar 1:4 and final coat 5 mm thick in cement mortar 1:4 final coat mixed with WPC @ 2% by weight of cement or as per manufacturer instructions, finished surface even and smooth without using extra cement complete all as directed. Note :- Water proofing compound (WPC) shall be measured and paid separately.

Supply only integral water proofing compound conforming to IS-2465-1975 complete all as specified and directed.

M&L for 3mm thick wall care putty first coat 2mm thick and final 1mm thick on wall surface complete all as specified and directed.

M&L for 3mm thick wall care putty first coat 2mm thick and final 1mm thick coat on ceiling surface complete all as specified and directed.

M&L for 2mm thick wall care putty on wall surface complete all as specified and directed.

M&L for 2mm thick wall care putty on ceiling surface complete all as specified and directed.

M & L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint , all as specified.

M & L for preparation of old wood or wood based surface and applying two coats of synthetic enamel paint , all as specified.

M & L and preparation of of new surfaces of wood and applying two coats of synthetic enamel paint on wood/wooden based surfaces over one coat of pink primer including preparation of new surfaces over 10 cm width or girth.

M&L preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paints all as specified.

M&L preparation of old steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints all as specified.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxid zinc crome primer all as specified.

M & L for preparation of newly plastered surfaces of ceilling and applying two coats of OBD over a coat of primer complete all as directed.

M&L for preparation of old surfaces of wall and applying one coat of oil bound distemper on old wall surface complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper on old wall surface complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coat of oil bound distemper over a coat of primer on new wall surface complete all as specified and directed.

Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here in below. (a) 10 mm thick (av. Minimum thickness) plastering in cement mortar 1:4 finishing the plastered surfaces even and smooth over cleaned Rcc roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25 degree C, 0.87 to 0.89 kg/ Liter and viscosity 70-160 cps. (c) providing and laying 3 mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proffing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction( Note : The work shall be executed through authorized applicator approved by the manufacturer of members)

M & L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as directed.

M & L for preparation old plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as directed.

M & L for preparation newly plastered surfaces of wall and applying three coats of white wash over a coat of chalk whiting priming paint on plastered surfaces complete all as directed.

M & L for preparation old plastered surfaces of wall and applying two coats of white wash over a coat of chalk whiting priming paint on plastered surfaces complete all as directed.

M&L 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof walls etc. complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified & directed.

M&L pre-cast reinforced cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM 1:6 including necessary forms, moulds etc complete all as directed .

M&L providing pre-cast cement concrete 1:2:4 Type B0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 55 mm thick (measured solid), including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L dark shed vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement mortar screed bed over 25 mm thick cement concrete (1:2:4) type B1 as in floor complete all as specified and directed compete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified and directed.

M&L Granite (of any type) tiles, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing complete all as specified and directed (Note :- Screed bed shall be measured and paid separately under respective item)

M&L coloured Glazed ceramic tiles in vertical surface 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

Cleaning of 500 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of 1000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of 2000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal to store.

Supplying and laying of 15mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal to store.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal to store.

Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

M & for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces

M&L CPVC Brass fittings like Brass elbow/ Tee/ Sockets/ Reducing sockets/ MBTA/ FBTA/ Union/ Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall/ floor complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Ltr capacity all as specified in SSR and as directed including taking down old one.

S&F rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed including taking down old one.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 2000 Ltr capacity all as specified in SSR and as directed including taking down old one.

S&F PVC tank cover of any size complete all as specified and as directed including taking down old one.

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed including taking down old one.

S&F stainless steel sink with draining board, made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste including fixed with cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 355 mm x 175 mm complete all as specified and directed including taking out old one.( Make Nirali, Popular Range, Model name- Elegance, small, glossy finish or equivalent)

S&F stainless steel sink made out of 1 mm thick sheet for kitchen or laboratory, with plug washers and waste coupling including fixed with cantilever brackets and connecting union to pipe overall size 485 mm x 410 mm, bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed.

S&F 15 mm dia swan neck pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed including taking out old one.

S&F in repair Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe, suitable for 15 mm bore complete all as specified.

S&F soap dish holder, stainless steel, fancy type chromium plated complete all as specified and as directed including taking out old one.

S&F tubular/towel rail 20 mm dia brass chromium plated 60 cm long between flange brass CP fixed with and incl chromium plated brass screws and wooden plastic cleats all as specified and directed including taking down old one.

S&F brass ball valves 20 mm dia high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed including taking out old one.

S&F 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S & F Stop valves cast copper alloy 15 mm dia, screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed all as specified and directed as in repairs.

S & F in repair angle cock or stop Valve cast copper alloy fancy two in one type15 mm dia bore with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed in repairs.

S & F in repair Angle / Stop Valve cast copper alloy fancy type15 mm dia bore with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed in repairs.

S&F 100 mm dia brass chromium plated shower rose fixed to steel pipe or union complete all as specified and directed including taking out old one. .

S&F wall mixture, cast copper alloy, screwed down, high pressure (chromium plated), with connecting legs, flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed including taking down old one.

S&F for PVC hot and cold water supply connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

S&F chromium plated health faucet ABB body with 8 mm dia. 1.00 m long CP flexible pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one.

S&F chromium plated hand shower 100 mm dia multy flow, ABB body with 8 mm dia. 1.5 m long CP flexiable pipe 15 mm bore complete all as specified and directed including taking down old one.

S&F stop valves (chromium plated fancy type) with long shank and cup (concealed type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking out old one.

S&F brass spindle for bib tap for 15 mm bore complete all as specified and directed including taking down old one.

S&F brass spindle for pillar tap for 15 mm bore complete all as specified and directed including taking down old one.

S&F brass spindle for stop cock for 15 mm bore complete all as specified and directed including taking down old one.

S&F 10 Ltr capacity PVC valveless syphonic action type dual flush type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.

S&F waste coupling of PTMT half or full threaded with 32 mm dia complete all as specified and directed (Minimum weight - 45gms) including taking out old one.

S & F PVC flush / waste pipe 32 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one.

M&L PVC float of low level flushing cistern complete all as specified and directed including taking out old one.

S & F PTMT Shelf, 450 mm long fixed with and including Chromium plated brass screws and wooden / plastic cleats (minimum weight 300 grms) complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed nut, screw and washer of mild steel, bright polished

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channel, plates, etc, including welding, griding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless stell nuts and bolts complete, including fixing the railing with necessary accessories & etc of required sixe, on the top of floor or the side of waist slab with suitable arrangement.as directed .

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr-in-charge.

S&F Steel Peg Set of size (450x50mm) including four aluminium hooks all as specified and directed.(with 6 nos hooks)

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L PCC 1:2:4 type B1 type (using 20 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Supply & fixed Maple laminated wooden flooring in size 1227mm x 197mm x 8mm thick including, flooring, breakers etc complete all as per manufacturers instruction with a layer of foam backing complete all as specified and as directed by Engr-in-Charge.

Providing & Fixing of 4mm Thick Aluminum Composite Panel EXTERIOR GRADE Solid Color ( BLUE & WHITE ) fixing on wall of the bldgs available at the station size 400mmx400mm with SS rebates/hold fast with mentioned bldg No on the plate (white/blue) complete in all respect as per specifieciation and direction of Engineer -in-Charge

Dismantling boarding any drscription, fixed in any position with nails

Anodised aluminium snap grid frame work for ceiling size of grid 605mmX605mm under gypsum board 12mm thick fixed with screws all as spd alongwith Hangers.

12mm thick particle board /tiles for insulation and accoustic purpose ,60cmX60cm size,fixed with nails over and including timer frame work with staples on snap grid complete all as specified and as directed.

RUNGTA STEEL CORPORATION (BID ID -3325895)

S B ENTERPRISE (BID ID -3327238)

KAKOLI ENTERPRISE (BID ID -3326661)

SRI BHOOMIJ INFRAPROJECTS & SERVICES LLP (BID ID -3325804)