Renovation of arrival toilet block at belt no.3 of NITB including fixing of toilet block elevation tiles at Visakhapatnam Airport during 2022-23. SH Civil works Phase-III.

Amount

Carriage of materials by Manual Labour including loading, unloading and stacking for lead less than 0.50 KM Lime, moorum, building rubbish outside the airport.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing stainless steel ( Grade 304) made of angles etc.,including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners adhesive etc.).

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60X 60 cm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I

12 mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 Metres lead as per direction of Engineer-in-charge In cement mortar

Dismantling doors ,windows and clerestory windows (steel or wood) shutter including chowkaths, architrave, holdfsats etc. complete and stacking within 50 Metres lead

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 Metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable and disposal of unserviceable material within 50 Metres lead .

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Dismantling of old C.I./S.W pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diameter

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing Two way bib cock Jaquar-OPP-15041 as per direction of EIC

Providing and fixing of health faucet Jaquar make ALD -CHR-565 Hand shower (Health Faucet )(ABS Body) with 1 meter long easy flex tube in Chrome finish & wall hook with all necessary accessories complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-incharge.

Providing and fixing Coloured toughed Frosted safety urinal partition glass 8mm thick with necessary Chrome Hardwre of size 900x450 mm Jaguar Model No.1810 UC (JSE-CHR-810UC 450X) all as per manufactureres specifications and direction of Engineer -in- Charge.

Providing and fixing in wash basin counters with 6mm thick both side polished culutred Marble (Korian Marble) of approved brand and manufacturer in stainless Steel frame work as directed by the EIC (Stainless Steel work will be paid separately ) as per manufacturer specification etc., as directed by the Engineer-In-Charge.

Providing and fixing gypsum board false ceiling border as approved by EIC

Providing and fixing Urinal without sensor with fixing accessories of Make : Jaguar URS-WHT-13253N (385 x 325 x 635 mm), as directed by engineering in-charge.

Providing and fixing sensors of Jaquar make SNR STL 51087 sensotronic sensor concealed type flushing valve for urinal complete set with installation box with control cock (Battery operated) complete as dircted by the EIC

Providing and fixing CubIcal partitions of size 1.5 x 1m with Greenlam sturdo classique make or equivalent of 12mm thick compact laminate 2.1m overall height and door size 0.60m width x 1.945m height with divider S.S shoe box with standard S.S grade304 and S.S accesories like Gravity hinges, Coat hook with door stoppeer, Door knob, lock set with indicator, tabular holder, U channel, Toprall hollow circular pipe, corner connector, Wall bracket and Rab as per manfacture specifications and direction of Engineer -in- Charge.

Providing and fixing CP pillar cock Make Jaquar PRS 031L65, 15 mm nominal bore with auto closing system with 65mm extension body as per manufactureres specifications and direction of Engineer -in- Charge

Providing and fixing Under Counter Basin Make Jaquar CNS WHT 705, as per manufactureres specifications and direction of Engineer -in- Charge

Providing and fixing Anchor Bolts, Drilling suitable holes in wall with power drivendrill machine to a minimum depth of 100mm upto 200mm in walls in position using Hilti Adhesive epoxy resin anchor grout Upto and including 12mm dia.as per manufactureres specifications and direction of Engineer -in- Charge

Providing and fixing C.P. brass Angular Stop Cock for basin mixer and geyser points make Jaquar CQT 23059 15 mm nominal bore as per direction of Engineer -in- Charge

Provoiding and fixing wall hung water closet of jaquar make: OPS WHT 15951 UF with UF soft close seat cover hinges and accessories set as per direction of Engineer -in- Charge

Providing and fixing 12mm thick water proof plywood of approved make to frame backing or studding with nails or required adhisive as per the direction per the Engineer-in-charge.

Providing and fixing Ist quality mirror of thickness 5mm as per direction of Engineer-incharge.

Providing and fixing PVC Half round 10mm beading for Wall tiles corners as per the direction per the Engineer-in-charge.

Providing and fixing 12mm thick froasted toughened glass frame less doors with polished edge of Ozone or its equivalent of size 2.5 sqm and above single door. The rate includes all necessary SS fittings, fixtures (Grade 304) like floor spring, SS handles making hole in glass, freight and installations charges etc complete as per the direction of Engineer in charge.

Providing and fixing 12mm thick froasted toughened glass frame less sliding door with polished edge of Ozone or its equivalent of size 2.5 Sqm and above single door. The rate includes all necessary SS fittings, fixtures (Grade 304) like guide rail with stopper, SS handles, lock and making hole in glass, freight and installations charges etc complete as per the direction of Engineer in charge.

Providing and fixing of PVC nahani trap of size 110 x 75 mm including necessary jointing etc complete as directed at site by E.I.C

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Plain L BOW 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Door L BOW 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Plain L BOW 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Door L BOW 75 mm

Providing and fixing flushing cistern of make Geberit / Jaquar or equivalent i/c of all fixtures and flush button with front actuation of make Geberit Alpha 15 bright chrome as per direction of EIC

Extra rate for providing and laying bigger size Vitrified tiles of size 600x1200 mm to walls as per direction of EIC

Providing and fixing drinking water wash basin floor standerard of Jaquar make (KUS -WHT- 35401), with CP sink cock of Jaquar make (39347S), CP angle cock make Jaquar (23053) including waste coupler PVC connectin and waste pipe as per direction of EIC.

Providing and fixing seamless mattfinish shower channel drain (Chilly Item code: SC CI 1000 100 with size 1000x100x30 mm or approved equivalent) with necessary fittings complete, including cutting & making of good the floors as directed by the EIC.

RECHI CONSTRUCTION PVT LTD

K RAMA KRISHNA RAJU