MAINTENANCE AND PAINTING IN PRIMARY SCHOOL IN UPPUTHARA GRAMA PANCHAYATH Re-Tender

Amount

SCHOOL MAINTENANCE

15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

od1531912/2021_2022 : Providing and fixing aluminium Traford sheet pre coated 0.45mm or nearest available thickness, total coated 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and thickness with zinc coating 120 grams per sqm as per IS:277 in polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer in charge. The sheet shall be fixed using self drilliong screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved faces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

od1531919/2021_2022 : Providing and fixing 150 mm semi circular PVC gutter 6 kg/cm2 with iron brackets , bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

od1531822/2021_2022 : Providing and fixing glass panells with Carpenter

od1531826/2021_2022 : Supplying and Fixing PVC Door with frame in localy avilable including Cost of all Fittings,Labour Conveyance etc Complete

14.7.1 : Renewing glass panes and re fixing existing wooden fillets:Float glass panes of thickness 4 mm

13.111.1 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

13.71 : Lettering with black Japan pint of approved brand and manufacture

dins joy

DESIGN TECH ENGINEERS AND CONTRACTORS

PERIYAR TRADERS

Bidder Name

dins joy

DESIGN TECH ENGINEERS AND CONTRACTORS

ABHILASH T.K

PERIYAR TRADERS